{ "moduleWIP": { "title": "生产报工" }, "moduleEQP": { "title": "设备报工", "bind": "请先选择设备" }, "moduleLot": { "title": "生产批报工", "bind": "请先选择作业站" }, "mrs-home": { "btn": { "refresh": "重新整理", "accessory": "领用配件", "mobilize": "设备稼动", "check": "设备点检" } }, "mrs-home_op": { "btn": { "refresh": "重新整理", "accessory": "配件上/下机", "check": "设备点检" } }, "dashboard": { "deviceInfo": { "title": "设备信息", "machine_no": "设备编号：", "status": "状态：", "machine_rate": "机台稼动状态", "change": "机台切换", "total_time": "总机时 ({{total_time}} m)", "today": "当日", "seven": "7日", "fourteen": "14日", "machine_no1": "设备编号", "nonStatus": "无法取得设备状态或设备编号不存在", "op_setting": "作业资料设定" }, "opInfo": { "title": "作业站信息", "op_no": "作业站编号:", "op_no_1": "作业站编号", "op_name": "作业站名称:", "op_type": "作业站类别:", "change": "作业站切换", "noneop": "作业站不存在" }, "qualityStatus": { "title": "产出信息", "good": "良品", "bad": "不良品", "badRate": "不良率" }, "workOperator": { "title": "上工人员", "userNo": "工号", "userName": "姓名", "login_place": "登入地点", "workstation": "作业站", "workarea": "区域", "workeq": "设备" }, "workMaterial": { "title": "上机物料", "materialName": "物料名称", "materialNo": "物料编号" }, "workLog": { "title": "生产任务", "status": "状态", "lotNo": "批号", "planDate": "预计开/完工时间", "arrivetime": "進站时间", "qty": "数量", "Q": "待执行", "R": "执行中", "C": "完成", "H": "异常", "W": "等待", "WH": "待开异常", "0": "待执行", "1": "执行中", "-1": "完成", "2": "等待", "3": "异常", "4": "执行完成", "dispatch": "手动 派工", "area": "区域", "phaseno": "阶段", "phasetype": { "0": "待Move in", "1": "待Check in", "2": "待Check out", "3": "待Move out", "-1": "" } }, "workAccessory": { "title": "配件" }, "workRecipe": { "title": "设备参数" }, "workTime": { "title": "总机时" }, "workEquipment": { "title": "设备信息" }, "workAttrib": { "title": "系统特性" }, "waitQC": { "title": "待点检", "qcListNo": "点检表编号", "qcListName": "点检表名称", "inspType": "检测类型" }, "reQC": { "title": "补点检", "qcListNo": "点检表编号", "qcListName": "点检表名称", "inspType": "检测类型", "lotNo": "批号" } }, "mrs00": { "title": "选择设备", "workStation_MES": "作业站", "workStation_SFT": "生产线：", "eqp": "设　备：", "workStation_scan": "请刷入作业站", "msg": { "workStationEmpty_MES": "请输入工作站", "workStationEmpty_SFT": "请输入生产线", "equipmentEmpty": "请选择机台", "cantGet": "无法取得", "machineInfo": "的机台信息", "opInfo": "作业站信息:", "machineStatus": "的机台状态", "equipmentCantSelect": "输入设备无法选取或不存在", "pleaseSetEMS": "无设备控管资料，请至设备控管设定调整", "opoptionmaterialoption": "作业站设定【用料选项】必须为【设备】", "opoptionmultoperatormod": "作业站设定【多人加工模式】必须为【设备】" } }, "mrs00_lot": { "title": "选择作业站", "workStation_MES": "作业站", "op_name": "作业站名称", "multioperatormode": "多人加工模式", "mode": { "0": "作业站", "1": "区域", "2": "设备", "5": "批号", "-1": "" }, "msg": { "op_not_exist": "作业站不存在", "unget_op": "尚未选取作业站", "opoptionmultoperatormod": "作业站设定多人加工模式不是【设备】、【作业站】，不允许使用" } }, "mrs01": { "title": "上/下工", "OperatorLogInEmp": "上工人员", "OperatorLogOutEmp": "下工人员", "pleaseScan": "请扫描员工编号", "operator": { "code": "员工编号：", "name": "员　　工：", "shift": "班　　别：", "startTime": "上工时间：", "endTime": "下工时间：" }, "hour": "时：", "minute": "分：", "msg": { "empty": "请先查出人员资料", "cantGet": "无法取得", "operatorInfo": "的员工资料", "end_time_ls": "结束时间不得小于" } }, "mrs02": { "title": "上料", "subTitle": "物料总览", "rTitle": "物料输入", "rTitle_SEMI": "半成品输入", "orderNo": "工单编号", "itemNo": "物料编号", "lotNo": "批号", "productNo": "产品编号", "substituteMaterialNo": "替代料编号", "itemPatchNo": "物料批号", "remainQty": "剩余数量", "totalQty": "总数量", "inputNumber": "数量", "pleaseInputMO": "请扫描工单编号", "pleaseInputMaterialNo": "请扫描物料编号", "pleaseInputSubstituteMaterialNo": "请扫描替代料编号", "pleaseInputMaterialLotNo": "请扫描物料批号", "pleaseInputQty": "请输入上料数", "pleaseInputLotNo": "请扫描批号", "2dbarcodemsg": "若有物料2D条形码，可直接于工单编号文字框直接刷入2D条形码", "noMaterialLot": "无批号", "materialLot": "收集批号", "list": { "column1": "物料编号", "column2": "物料批号", "column3": "数量" }, "msg": { "materialEmpty": "请输入上料资料", "MoNoEmpty": "请输入[工单编号]", "MaterialsNoEmpty": "请输入[物料编号]或是[物料批号]", "QtyEmpty": "请输入[数量]", "QtyZero": "[数量]不得为0", "materialNotFound": "不存在于工单用料清单", "notAllowToUseSubstitute": "不允许使用替代料", "MaterialMustCheckLotNo": "选取的物料需检查批号", "lotNoNotFound": "不存在於半成品线边仓", "MoNoNotFound": "工单不存在" }, "dialog": { "title": "确认删除", "content": "物料不足时，无法顺利完成进站。", "delete": "删除" } }, "mrs03": { "title": "进站", "prodPatchNo_MES": "批号", "pleaseInputLotNo": "请扫描批号", "applyMaterial": "上机物料", "totalQty": "总数量", "checkInSelection": "生产信息", "orderNo": "订单编号", "workNo": "工单编号", "customer": "客户名称", "prodNo": "产品编号", "checkInQty": "进站数量", "offlineTime": "进站时间", "completeTime": "预计完成时间", "msg": { "incomeEmpty": "请输入进站数量。", "needAlert": "设备数值已达红色区域，无法进行进站。", "noOperator": "人员尚未上工，无法进站。", "flotEmpty": "请先查出要执行进站的资料。", "flotNoEmpty_MES": "请输入批号。", "flotNoEmpty_SFT": "请输入制令编号、制程、工序。", "cantGet": "无法取得", "plotInfo": "的资料", "cantTrackIn": "不可执行进站", "complete": "已进站", "pleaseselectequip": "请勾选设备", "HOLD": "生产批状态为HOLD,请至MES系统操作", "WAIT": "生产批状态为WAIT,请至MES系统操作", "noneqp": "目前无可用设备", "havatofinish": "必须完成", "havatochoose": "必须选择", "cannotfindassignationacctype": "找不到指定配件类型", "nousedassignationaccno": "没有使用指定的配件", "nousedassignationeqpdispatcheqpno": "没有选择设备派工的设备", "dispatchisnotthehighestpriority": "派工顺序不为最优先级", "dispatcheqpnodate": "此设备派工并无今日日期", "shouldinputmateriallotno": "必须输入完整的物料批号", "quantityisnotenough": "请检查数量", "OnlySupportOneEquipment": "只允许勾选单一设备" }, "chk_material_list": { "type_1": "物料编号", "type_2": "物料名称", "type_3": "标准用量", "type_4": "使用数量", "type_5": "单位" }, "chk_material_sublist": { "type_1": "替代物编号", "type_2": "物料批号", "type_3": "数量", "type_4": "使用数量" }, "dialog": { "title": "完成进站", "content": "批号", "confirm": "完成" } }, "mrs03_lot": { "chk_material": { "title": "料批查核", "mtl_no": "物料编号", "mtl_no_scan": "请刷入物料编号", "mtl_lotno": "料批", "mtl_lotno_scan": "请刷入物料批号", "std_qty": "标准用量" } }, "mrs04": { "title": "出站", "prodPatchNo_MES": "批号", "pleaseInputLotNo": "请扫描批号", "materialInput": "用料登录", "maerialNo": "物料编号", "materialLotNo": "物料批号", "unitStdQty": "单位标准用量", "stdQty": "标准用量", "userQty": "使用量", "unit": "单位", "produceInformation": "生产信息", "MONo": "工单编号", "pLot": "批号", "inputQty": "投入数", "goodQty": "良品数", "scrapQty": "损坏数", "defectQty": "缺点数", "equipmentInfo": "设备信息", "must_be_greater_than": "必须大于", "continue": "是否继续", "orderlist": { "column1": "工单编号", "column2": "批号", "column3": "移出品", "column4": "投入数", "column5": "良品数", "column6": "制令编号", "column7": "制程", "column8": "工序", "column9": "损坏数", "column10": "缺点数" }, "materiallist": { "column1": "物料编号", "column2": "物料批号", "column3": "单位标准用量", "column4": "标准用量", "column5": "使用量", "column6": "单位" }, "badreasonlist": { "type_": "", "type_0": "", "type_1": "报废", "type_2": "短少", "type_3": "多余", "column1": "类型", "column2": "原因", "column3": "不良编号", "column4": "数量", "reasontype_0": "损坏", "reasontype_1": "缺点" }, "workTimelist": { "column1": "工号", "column2": "姓名", "column3": "上工时间", "column4": "工时" }, "msg": { "AbnormalTypeEmpty": "请选择例外类型 ", "AbnormalNoEmpty": "请选择例外原因 ", "DefectQtyEmpty": "例外数量不得空白或是0 ", "AbnormalError_1": "第", "AbnormalError_2": "笔资料", "QtyEmpty": "请输入数量。", "errorCodeEmpty": "请输入正确的不明原因代码。", "cantGetErrCode": "无法取得例外原因代码。", "greatThanGood": "例外品数量不可大于出站数量。", "noOperator": "人员尚未上工，无法出站。", "flotEmpty": "请先查出要执行出站的资料。", "flotNoEmpty_MES": "请输入批号。", "flotNoEmpty_SFT": "请输入制令编号、制程、工序。", "cantGet": "无法取得", "plotInfo": "的资料", "cantTrackOut": "不可执行出站", "needOperator": "请先执行人员上工作业", "employee_no.empty": "请输入员工编号", "employee_name.empty": "请先查出员工资料", "work_time_diff.empty": "请输入工时", "work_time_diff.zero": "工时不得为0", "CheckOutQty_gt_badQty": "出站数量少于例外品数量，请问是否重新输入例外原因及数量?", "CheckOutQty_gt": "出站数量不可大于进站数量", "CheckOutQty_zero": "出站数量不可为0", "barcode_empty": "请输入例外原因编号", "barcode_empty_mtlno": "请输入物料编号", "barcode_empty_mtllotno": "请输入物料批号", "complete": "已出站", "HOLD": "生产批状态为HOLD,请至MES系统操作", "WAIT": "生产批状态为WAIT,请至MES系统操作", "lotstampError": "此生产批有其他动作进行，禁止目前动作的继续", "useEQPErrorMultiEQP": "生产批使用多笔设备，请使用生产批报工模式", "useEQPErrorNoneEQP": "生产批无进站设备", "useEQPErrorNotMatchEQP": "进站设备，与装置绑定不相符", "doesNotBelongOP": "生产批不存在于此作业站", "doesNotBelongBR": "生产批企业逻辑不属于L_CO_GEN", "lotNotFound": "生产批不存在" } }, "mrs05": { "itemStd": "标准", "itemArea": "区间", "title": "设备点检", "equipmentCode": "设备编号：", "pointCheck": "点检编号：", "inputCheckValue": "点检值", "description": "说明", "EQPTYPE": "设备类别", "EQUIPMENTNO": "设备编号", "EQUIPMENTNAME": "设备名称", "QCLISTNO": "点检表编号", "QCLISTNAME": "点检表名称", "QCTYPE": { "NONE": "无", "LOTINSPECTION": "每批检", "SHIFTINSPECTION": "每班检", "DAILYINSPECTION": "每日检" }, "list": { "column1": "编号", "column2": "点检项目", "column3": "点检方法", "column4": "标准值", "column5": "点检值", "column6": "最小", "column7": "最大" }, "msg": { "checkValueEmpty": "请输入点检值", "listEmpty": "此设备并无点检项目可供修改", "notDefine": "未定义", "areYouSureToExecute": "是否确定" } }, "mrs06": { "title": "设备稼动", "machine_no": "设备编号：", "machine_status": "目前状态：", "machine_runtime": "回报时间：", "reasonKeyIn": "原因输入", "emsReason": "改变设备状态原因", "description": "说明", "reason_no": "原因编号", "reason_name": "原因名称", "ReasonNoEmpty": "请选择原因编号", "pleaseScan": "请扫描稼动原因", "machine": { "statusMES": { "s_": "", "s_RUN": "加工", "s_0": "加工", "s_IDLE": "闲置", "s_1": "闲置", "s_2": "故障", "s_3": "维修", "s_4": "停机", "s_STOP": "暂停", "s_5": "暂停" }, "statusSFT": { "s_": "", "s_RUN": "正常", "s_0": "正常", "s_IDLE": "闲置", "s_1": "闲置", "s_2": "故障", "s_3": "设置", "s_4": "下班", "s_STOP": "暂停", "s_5": "暂停" } }, "msg": { "alert1": "请选择要变更的状态", "alert2": "设备稼动储存成功" } }, "mrs07": { "title": "SOP", "menuTitle": "SOP", "msg": { "cantDownloadFile": "无法下载档案", "cantOpenFile": "目前载具不支援开启此种档案" } }, "mrs08": { "title_MES": "生产批暂停", "title_SFT": "制令暂停", "menuTitle": "暂停", "workStation_MES": "作业站：", "workStation_SFT": "生产线：", "plot_no_MES": "批号：", "plot_no_SFT": "制令编号：", "op_no": "制程：", "op_seq": "工序：", "qty": "生产数量：", "reason_code": "异常编号：", "reason": "异常原因：", "pause_status": "暂停类型：", "pause_status_1": "整张制令", "pause_status_2_MES": "生产批制程", "pause_status_2_SFT": "制令制程", "msg": { "confirm_success": "暂停执行完成", "cantGetErrCode": "无法取得生产异常原因", "emptyErrCode": "请输入生产异常原因" } }, "mrs09": { "title_MES": "生产批解除暂停", "title_SFT": "制令解除暂停", "menuTitle": "解除
暂停", "workStation_MES": "作业站：", "workStation_SFT": "生产线：", "plot_no_MES": "批号：", "plot_no_SFT": "制令编号：", "op_no": "制程：", "op_seq": "工序：", "qty": "生产数量：", "reason_code": "解除编号：", "reason": "解除原因：", "pause_status": "解除类型：", "pause_status_1": "整张制令", "pause_status_2_MES": "生产批制程", "pause_status_2_SFT": "制令制程", "msg": { "confirm_success": "解除暂停执行完成", "cantGetErrCode": "无法取得解除暂停原因" } }, "mrs10": { "attrib_input": "特性输入", "attrib_no": "特性编号", "attrib_type": "资料类型", "attrib_value": "特性值", "hour": "时", "minute": "分", "seconds": "秒", "title": "作业资料设定", "workStation_MES": "作业站：", "workStation_SFT": "生产线：", "eqp": "设　备：", "msg": { "equipmentEmpty_MES": "请输入设备", "workStationEmpty_SFT": "请输入生产线", "opEmpty": "请选择作业站", "cantGet": "无法取得", "machineInfo": "的机台信息", "machineStatus": "的机台状态", "opCantSelect": "输入作业站无法选取或不存在" } }, "mrs01_lot": { "title": "上 / 下工", "opno": "作业站编号：", "U": "未上工", "D": "已上工", "status": "状态", "clockinsuccessfully": "上工成功", "clockoutsuccessfully": "下工成功", "pleaseScanUser": "请扫描员工编号", "pleaseScanEQP": "请扫描设备编号", "operator": { "eqpno": "设备编号：", "code": "员工编号：", "name": "员　　工：", "shift": "班　　别：", "startTime": "上工时间：", "endTime": "下工时间：" }, "hour": "时：", "minute": "分：", "list": { "column1": "员工编号", "column2": "作业站编号", "column3": "上工地点", "column4": "状态" }, "msg": { "empty": "请先查出人员资料", "cantGet": "无法取得", "operatorInfo": "的员工资料", "eqpbasis": "设备主档", "userbasis": "使用者主档", "please_keyin_eqpno": "请输入设备编号", "Duplicate_data": "资料重复", "opbasis": "作业站主档", "is_not_exit_in": "不存在", "end_time_ls": "结束时间不得小于" } }, "wp05_lot_erf_create": { "title": "异常单开立", "lot_no": "批号", "op_no": "作业站编号", "product_no": "产品编号", "product_name": "产品名称", "release_eqp": "释放设备", "change_state": "转换状态", "mclass_no": "主分类编号", "sclass_no": "次分类编号", "hold_Description": "异常说明", "hold_Picture": "异常照片", "true": "是", "false": "否", "ERFNo": "异常单编号", "list": { "column1": "异常原因编号", "column2": "异常原因名称", "column3": "数量", "column4": "说明" }, "dialog": { "title": "异常原因", "reason_no": "异常原因编号", "amount": "数量", "description": "说明" }, "msg": { "reason_no_is_not_exit": "异常原因不存在", "msg001": "主分类编号不可空白!", "msg002": "次分类编号不可空白!", "msg003": "异常说明不可空白!", "msg004": "请登录异常原因!", "msg005": "异常单开立完成!" } }, "lc_ci_gen": { "reverse": "还原", "title": "元件进站", "menuTitle": "进站", "prodPatchNo_MES": "批号：", "prodPatchNo_SFT": "制令编号：", "workStation_MES": "工作站：", "workStation_SFT": "生产线：", "equipmentCode": "设备编号：", "orderNo": "订单编号：", "workNo": "工单编号：", "customer": "客户名称：", "prodNo": "产品编号：", "incomeNumber": "进站数量：", "inputIncome": "进站数量", "unit": "单位：", "offlineTime": "进站时间：", "completeTime": "预计完成日：", "op_no": "制程：", "op_seq": "工序：", "attrib_input": "特性输入", "curqty": "目前数量：", "sysqty": "系统数量：", "priority": "优先权　：", "msg": { "incomeEmpty": "请输入进站数量。", "needAlert": "设备数值已达红色区域，无法进行进站。", "noOperator": "人员尚未上工，无法进站。", "flotEmpty": "请先查出要执行进站的资料。", "flotNoEmpty_MES": "请输入批号。", "flotNoEmpty_SFT": "请输入制令编号、制程、工序。", "cantGet": "无法取得", "plotInfo": "的资料", "cantTrackIn": "不可执行进站", "complete": "已进站", "pleaseselectequip": "请勾选设备", "HOLD": "生产批状态为HOLD,请至MES系统操作", "WAIT": "生产批状态为WAIT,请至MES系统操作", "thiseqpcantuselot": "此设备编号无法用于此生产批", "plaseuse": "请使用", "isNotEnough": "不足", "pleaseExecuteMountMaterial": "请执行上料", "NACannotBeUsedAsTheMaterialLotNo": "不可以使用N/A当作批号" }, "componentlist": { "column1": "序列号" }, "btn": { "attrib": "特性输入", "mtlLot": "物料输入", "eruncard": "eRunCard" } }, "wp_excute_lot": { "menuTitle": "报工", "fail": "执行失败", "brfail": "请至PC端执行生产批报工", "brexception": "此企业逻辑不支援平版报工", "brstack": "", "BusinessRule": "企业逻辑", "notFound": "找不到", "executeLot": "生产批执行", "doesNotBelongOP": "生产批不存在于此作业站", "doesNotBelongEQP": "生产批不存在于此设备", "0000-100101": "目前企业逻辑为函式型的企业逻辑,是否执行?", "exception": "法则方法of企业逻辑编号：", "dialog": { "title": "WP_LotSelect", "confirm": "是", "cancel": "否" } }, "lc_co_gen": { "title": "元件出站", "menuTitle": "出站", "prodPatchNo_MES": "批号：", "prodPatchNo_SFT": "制令编号：", "workStation_MES": "工作站：", "workStation_SFT": "生产线：", "equipmentCode": "设备编号：", "badReason": "不良原因", "badReason_barcode": "不良条形码：", "number": "数量：", "inputStdUSeQty": "使用量", "workTime": "工时明细", "labor_hours": "总人时：", "machine_hours": "机　时：", "employee_no": "员工编号", "employee_name": "员工名称", "work_time": "工　　时", "attrib_input": "特性输入", "workStation": "工作站", "equipment_no": "设备编号", "curqty": "批量", "chk_all": "全选", "un_chk_all": "全不选", "component_no": "序列号", "lot_no": "批号", "CheckBox": "选取", "CPass": "判定", "CGoodQty": "良品", "CScraptQty": "损坏", "open": "开启", "dialog": { "material": { "title": "物料输入", "MATERIALNO": "物料编号", "STDQTY": "单位标准用量", "STDUSEQTY": "标准用量", "USEQTY": "使用数量", "UNITNO": "单位", "SUBMATERIALNO": "替代料编号", "MATERIALLOTNO": "物料批号", "QTY": "数量", "msg": { "mtlunexist": "料批不存在", "mtlalreadyfeed": "料批已输入", "VIOLATEFIFOCONSTRAINT": "不符合先进先出使用限制" } } }, "orderlist": { "column1": "工单编号", "column2": "批号", "column3": "移出品", "column4": "投入数", "column5": "良品数", "column6": "制令编号", "column7": "制程", "column8": "工序", "column9": "损坏数", "column10": "缺点数" }, "materiallist": { "column1": "物料编号", "column2": "物料批号", "column3": "单位标准用量", "column4": "标准用量", "column5": "使用量", "column6": "单位" }, "badreasonlist": { "type_": "", "type_0": "", "type_1": "报废", "type_2": "短少", "type_3": "多余", "column1": "类型", "column2": "原因", "column3": "不良编号", "column4": "数量", "reasontype_0": "损坏", "reasontype_1": "缺点" }, "workTimelist": { "column1": "工号", "column2": "姓名", "column3": "上工时间", "column4": "工时" }, "msg": { "AbnormalTypeEmpty": "请选择例外类型 ", "AbnormalNoEmpty": "请选择例外原因 ", "DefectQtyEmpty": "例外数量不得空白或是0 ", "AbnormalError_1": "第", "AbnormalError_2": "笔资料", "QtyEmpty": "请输入数量。", "errorCodeEmpty": "请输入正确的不明原因代码。", "cantGetErrCode": "无法取得例外原因代码。", "greatThanGood": "例外品数量不可大于出站数量。", "noOperator": "人员尚未上工，无法出站。", "flotEmpty": "请先查出要执行出站的资料。", "flotNoEmpty_MES": "请输入批号。", "flotNoEmpty_SFT": "请输入制令编号、制程、工序。", "cantGet": "无法取得", "plotInfo": "的资料", "cantTrackOut": "不可执行出站", "needOperator": "请先执行人员上工作业", "employee_no.empty": "请输入员工编号", "employee_name.empty": "请先查出员工资料", "work_time_diff.empty": "请输入工时", "work_time_diff.zero": "工时不得为0", "CheckOutQty_gt_badQty": "出站数量少于例外品数量，请问是否重新输入例外原因及数量?", "CheckOutQty_gt": "出站数量不可大于进站数量", "CheckOutQty_zero": "出站数量不可为0", "barcode_empty": "请输入例外原因编号", "complete": "已出站", "HOLD": "生产批状态为HOLD,请至MES系统操作", "WAIT": "生产批状态为WAIT,请至MES系统操作", "selectComponet": "请先点选要操作的元件", "ScrapQtyCanNotMoreThanGoodQty": "不良数量不可大于元件片数, 元件数量:" }, "componentlist": { "column1": "序列号" }, "btn": { "eruncard": "eRunCard", "attrib": "特性输入", "material": "物料输入", "badreason": "不良输入" } }, "l_co_duplicateattrib": { "DUPLICATEATTRIB": "纪录加工资讯", "msg": { "DuplicateAttribSuccess": "记录加工资讯 成功" } }, "br03_lot_spc": { "title": "品检", "PRODUCTNAME": "产品名称", "SAVETEMP": "暂存", "SAVE": "储存", "QCITEM_V": "计量品管项目", "QCITEMRESULT_Show": "检验结果", "QCITEMNO": "品管项目编号", "QCITEMNAME": "品管项目名称", "SAMPLEQTY": "抽样数", "QCITEM_A": "计数品管项目", "QCITEM_V_GP": "群组品管项目", "CreateERF": "开立异常单", "CurBRNO": "目前BR", "LotResult": "判定结果", "QCITEMTYPE": "品管项目类型", "complete": "完成", "unVerified": "待检验", "msg": { "msg001": "请先收集要因", "msg002": "暂存完成", "msg003": "储存完成", "msg004": "查询不到批号资料", "msg005": "批号HOLD!请开立异常单", "msg006": "请回MES系统界面进行相关处理", "msg007": "不可执行SPC品检" }, "QCITEMRESULT": { "Pass": "合格", "Hold": "异常", "Wait": "等待", "Warning": "提示", "Alert": "警告", "null": "未验" }, "EXECUTEFLAG": { "0": "未验", "1": "已验" }, "QCITEMTYPEVALUE": { "0": "计数", "1": "计量", "2": "计量群组", "3": "计数群组" } }, "Keyin_SPC_CollectFactor": { "title": "收集要因", "msg": { "error": "资料有误，请重新输入" } }, "Keyin_Att_MeasureData": { "title": "计数输入", "msg": { } }, "Keyin_Var_MeasureData": { "title": "计量输入", "msg": { } }, "Keyin_Var_MeasureData_Group": { "title": "计量群组", "msg": { } }, "wp03_e_runcard": { "title": "eRunCard", "processTitle": "作业站流程", "pleaseInputLotNo": "请扫描批号", "qcitem": "品管项目", "mtl": "原物料", "componentList": { "title": "元件清单", "componentno": "元件编号", "cpass": "判定", "cgoodqty": "良品", "cscrapqty": "损坏", "unitno": "单位" }, "componentAttrib": { "title": "制程参数_元件", "componentno": "元件编号" }, "cpass": { "0": "合格", "1": "不合格", "2": "异常", "3": "等待", "null": "未判" }, "lot": { "title": "生产批信息", "lotNo": "批号", "MONo": "工单编号", "status": "状态", "MODesc": "工单备注", "prdNo": "产品编号", "psNo": "流程编号", "prdVer": "产品版本", "psVer": "流程版本", "curOP": "作业站编号", "curQty": "目前数量", "sysQty": "系统数量", "stage": "生产阶段" }, "op": { "title": "作业站信息", "opName": "作业站名称", "opAbbrName": "作业站简称", "opType": "作业站类型", "opNo": "作业站编号", "opDesc": "作业站说明" }, "count": { "title": "数量", "inputQty": "进站数量", "failQty": "不良报废", "lossQty": "遗失", "goodQty": "出站数量" }, "time": { "title": "过帐时间", "user": "使用者", "shift": "班别", "phase": "生产阶段", "time": "时间" }, "eqp": { "title": "设备", "eqpNo": "设备编号", "startTime": "开始时间", "endTime": "结束时间", "coci": "CO-CI(分)" }, "accessory": { "title": "配件", "accType": "配件类别资料", "accNo": "配件编号", "startTime": "开始时间", "endTime": "结束时间", "useQty": "使用数量" }, "attrib": { "sysTitle": "制程参数", "keyinTitle": "输入参数", "phase": "特性作用阶段", "attNo": "特性编号", "attValue": "特性值", "user": "操作人员", "time": "时间" }, "rule": { "title": "法则", "ruleNo": "法则编号", "ruleValue": "法则", "result": "结果" }, "qc": { "first": "首检检验", "patrol": "巡检检验", "outbound": "出站检验", "offline": "离线检验", "itemSort": "品管项目类别", "itemNo": "品管项目名称", "itemName": "品管项目名称", "serial": "执行次序", "num": "抽样数量", "result": "检验结果", "detail": "明细", "errorlist": "不良明细", "Att": "计数", "Var": "计量", "AttGroup": "计数群组", "VarGroup": "计量群组", "pass": "合格", "fail": "不合格", "noresult": "未验", "notneedresult": "不需要验", "executed": "已执行", "notexecuted": "未执行" }, "qcresult": { "0": "合格", "1": "异常", "2": "等待", "3": "提示", "4": "警告" }, "qcdetail": { "title": "批号检测资料", "resultnum": "检验序号", "testvalue": "检验值" }, "material": { "bomTitle": "工单用料清单", "mtlTitle": "实际用量", "putin": "投料点", "isMtl": "物料/半成品", "mtlNo": "物料编号", "mtlLot": "物料批号", "mtlName": "物料名称", "moQty": "工单需求数", "stdQty": "标准用量", "unit": "单位", "useQty": "使用数量", "useDate": "使用日期", "user": "操作人员", "subNo": "替代料编号", "subStdQty": "替代料标准用量" }, "reason": { "title": "不良原因", "reasonNo": "不良原因编号", "reasonName": "原因名称", "compNo": "元件编号", "count": "不良数量", "desc": "说明" }, "operator": { "title": "多人加工", "useNo": "使用者编号", "useName": "使用者名称", "startTime": "开始加工时间", "endTime": "结束加工时间", "creator": "登入建立人", "createDate": "登入建立日期", "outor": "登出建立人", "outDate": "登出建立日期", "coci": "CO-CI(分)" }, "msg": { "processNotFound": "流程不存在", "lotNotFound": "批号不存在" } }, "badreason_component": { "msg": { "alreadyEntered": "已输入", "onepiece": "单片" } }, "keyinattrib_component": { "msg": { "alreadyEntered": "已输入", "thecomponenthavescrap": "下列元件编号有输入损坏,需为NOT PASS或移除损坏" }, "datatype": { "0": "数值", "1": "字串", "2": "百分比", "3": "时间", "4": "布林" }, "cpass": { "0": "Pass", "1": "NotPass", "2": "Hold", "3": "Wait" } }, "wp07_lot_wait_create": { "title": "等待单开立" } }