{
  "Menu": "選單",
  "menuTitle": {
    "checkin": "報工",
    "checkout": "報工",
    "spc": "報工",
    "undo": "還原"
  },
  "Logout": "登出",
  "update": {
    "msg.checking_update": "檢查更新中...",
    "msg.cant_get_verInfo": "無法取得版本資訊",
    "msg.update_download_start": "開始下載更新...",
    "msg.update_downloading": "更新下載中...",
    "msg.prepare_updat": "正在準備更新程式...",
    "msg.updating": "程式更新中...",
    "msg.cant_download": "無法下載更新，請確認伺服器連線是否正常",
    "msg.zip_cant_download": "無法下載更新，更新用的檔案不存在，請確認伺服器連線資訊是否正確",
    "msg.zip_server_error": "伺服器發生錯誤，請確認伺服器連線資訊是否正確",
    "msg.zip_server_connect": "伺服器無法連線，請確認伺服器連線資訊是否正確",
    "msg.temp_file_cant_dele": "暫存檔案刪除失敗",
    "msg.temp_file_not_exist": "暫存檔案刪除失敗",
    "msg.update_complete": "程式更新完成...",
    "msg.zip_cant_write": "請使用系統管理員許可權開啟",
    "msg.delete_temp_file": "正在刪除暫存檔案..."
  },
  "common": {
    "confirm": "確定",
    "create": "建立",
    "cancel": "取消",
    "complete": "完成",
    "scan": "掃描",
    "lotno": "批號",
    "msg": {
      "no_data": "查無資料!",
      "please_input_num": "請輸入數字",
      "no_permissions": "使用者許可權不足",
      "plz_select": "請選擇",
      "camera_not_support": "目前裝置無法使用相機",
      "code_format_error": "條碼格式錯誤",
      "plz_select_one": "請選擇一筆",
      "time_format_error": "時間格式錯誤",
      "is_logout": "是否登出?",
      "great_than": "不可大於",
      "less_than": "不可小於",
      "input_zero": "不可為0",
      "select_time": "請輸入時間",
      "no_report_condition": "最少請選擇一項查詢條件",
      "no_report_condition_confirm": "尚未設定查詢條件可能造成查詢時間較長，是否仍要繼續?",
      "lose_server_connect": "與伺服器連線中斷，請問是否重新連線?",
      "cant_use_camera": "目前裝置無法使用相機",
      "barcode_foramt_error": "條碼格式錯誤",
      "loading": "資料載入中...",
      "program_loading": "作業載入中...",
      "cantDownloadFile": "無法下載檔案",
      "file_download_complete_and_open": "檔案下載完成，是否開啟檔案?",
      "file_downloading": "開始下載檔案",
      "pagerendered": "準備進行標籤列印",
      "success": "作業執行完成",
      "still_working": "程式仍在調整中，暫時無法使用",
      "need_update": "客戶端程式需要更新才能繼續使用，請問是否現在更新?",
      "without_permissions": "目前帳號未擁有此功能的使用權限。",
      "checkin_lot": "完成進站",
      "checkout_lot": "完成出站",
      "notFound": "不存在",
      "isfuturewait": "是預先等待",
      "isfutureospleaseusethetemporaryoutsourcing": "是預先外包設定，請使用臨時外包"
    },
    "btn": {
      "confirm": "確定",
      "cancel": "取消",
      "retry": "重試",
      "close": "關閉",
      "yes": "是",
      "no": "否"
    }
  },
  "dialog": {
    "confirm": "確定",
    "cancel": "取消",
    "holdPleaseExecERF": "法則觸發HOLD，請至PC端開立異常單",
    "pleaseInput": "必填",
    "notInput": "未輸入",
    "keyinattrib": {
      "title": "特性輸入",
      "attrib_type_int": "數值",
      "attrib_type_str": "字串",
      "attrib_type_percent": "百分比",
      "attrib_type_time": "時間",
      "attrib_type_boolean": "布林",
      "wrongdate": "日期格式錯誤",
      "wronghour": "時間格式錯誤",
      "wrongminute": "分鐘格式錯誤",
      "wrongsec": "秒數格式錯誤",
      "inputhour": "輸入-時",
      "inputminute": "輸入-分",
      "inputsec": "輸入-秒",
      "pleaseInput": "必填",
      "notInput": "未輸入",
      "VALIDLIST": "有效資料",
      "NONVALIDLIST": "無特性資料來源"
    },
    "badreason_lot": {
      "title": "不良原因",
      "badReason_barcode": "不良條碼",
      "qty": "數量"
    },
    "accessory": {
      "title": "配件上下機",
      "eqpNo": "設備編號",
      "install": "上機",
      "remove": "下機",
      "remain": "剩餘",
      "nACCSPAREQTY": "無上限",
      "pleaseInputNo": "請輸入設備編號"
    },
    "chkRule": {
      "ABORTRULE": "(中止作業，不允許執行)",
      "ALERT": "(警示)",
      "HOLD": "(異常)",
      "NOTE": "(提醒)",
      "QUESTION": "(詢問後繼續)",
      "WAIT": "(等待)",
      "WARNING": "(警告，不允許執行)",
      "NEXT": "下一步"
    },
    "spc": {
      "sampling": "抽樣項目",
      "numberOfSamples": "抽樣數",
      "QCItemNo": "品管項目編號",
      "QCItem": "品檢項目",
      "reason": "不良原因",
      "scrap": "損壞",
      "defect": "缺點",
      "adjust": "調整",
      "eqp": "設備",
      "th": "第",
      "calc": "計算",
      "msg": {
        "scrapOver": "損壞總數超出抽樣數",
        "errorSamples": "抽樣數異常",
        "notExpression": "不是有效的表達式",
        "firstNotSharp": "第一個字符必須為'#'",
        "notClosingBracket": "表達式最後一個字符必須為')'",
        "notValidExpression": "無效的表達",
        "isNaN": "不是數值"
      }
    }
  },
  "error": {
    "connectRefused": "與伺服器連線出錯，請檢查您的網路連線。",
    "connectNotify": "與伺服器連線有異狀。",
    "sessionTimeout": "登入已逾時，請重新登入。",
    "connect_timeout": "連線逾時，請重新再試",
    "pageNotFound": "頁面不存在"
  },
  "Login": {
    "welcome": "歡迎使用",
    "title": "請登入KMI",
    "msg": "請輸入帳號密碼",
    "login": "登　　入",
    "setting": "設　　定",
    "account": "使用者",
    "password": "密碼",
    "environment": "環境",
    "ServerList": "環境選擇",
    "copyright": "鼎華系統 著作權所有，並保留一切權利。",
    "env": {
      "Production": "正式區",
      "Test": "測試區"
    },
    "error": {
      "ap": "帳號密碼錯誤，請確認!",
      "login": "無法登入!"
    },
    "msg.logining": "正在登入中，請稍後",
    "msg.getUserInfo": "取得使用者資料...",
    "msg.user_permissions_info_get": "取得使用者許可權...",
    "errorMsg": {
      "name1": "預設機台",
      "name2": "狀態無法取得，請重新選擇機台",
      "name3": "不存在，請重新選擇機台",
      "name4_MES": "作業站",
      "name4_SFT": "生產線",
      "name5": "不存在，請重新選擇"
    },
    "pleaseInputAcc": "＊請輸入帳號密碼",
    "accPawdError": "＊ 帳號或密碼錯誤，請再試一次，或聯絡 [系統管理員 ]",
    "accPawdPrivError": "＊ 目前使用者等級為 未列管之使用者，不允許使用行動報工程式。使用者編號：",
    "nonePage": "沒有選取任何模組，請新增模組後再進行",
    "connError": "＊連線失敗，請確認設定",
    "licensesNotFound": "＊找不到系統註冊資料",
    "licensesError": "＊系統註冊資料錯誤",
    "licensesChkError": "＊系統授權已過期",
    "licensesUserOverLimit": "＊超出系統最大上線人數",
    "licensesIsTrialVersion": "現在使用的是試用授權，請更新為正式授權！",
    "licensesLessThan30days": "授權到期日期小於30天",
    "close": "離　開",
    "apkInstall": "APK已有新版本發行，請至MES首頁下載"
  },
  "home": {
    "title": "首頁",
    "setting": "設　定",
    "logout": "登　出",
    "exit": "離　開",
    "versionInfo": "版　本",
    "X": "X",
    "prod": "正式",
    "test": "測試",
    "msg": {
      "isLogout": "請問是否登出?"
    }
  },
  "Setting": {
    "second": "秒",
    "title": "參數設定",
    "fixedIP": "固定IP",
    "dhcpIP": "DHCP",
    "connectionMode": "連線資訊",
    "client": {
      "ip": "本地IP",
      "mask": "子網路遮罩",
      "geteway": "預設閘道",
      "account": "帳號",
      "password": "密碼",
      "account_password": "默認帳號密碼"
    },
    "server": {
      "ip": "伺服器IP",
      "port": "通訊阜",
      "timeout": "連線超時",
      "name": "伺服器名稱",
      "prodSTD": "正式區STD",
      "prodEAI": "正式區EAI",
      "prodSC": "正式區SC",
      "testSTD": "測試區STD",
      "testEAI": "測試區EAI",
      "testSC": "測試區SC"
    },
    "alwaysOn": "螢幕常亮",
    "machineNotifi": "機台提醒",
    "logout.timeout": "自動登出時間",
    "companyID": "公司代碼",
    "machine": "預設機台代碼",
    "workTech": "工件技術功能",
    "sysIntegrate": "系統整合",
    "materialWarin": "物料警示數量",
    "RefreshTime": "畫面更新頻率",
    "PlatName": "後臺應用程式名稱",
    "opdatasetting": "作業資料設定方式",
    "workmode": "報工模式",
    "oppriority": "作業站優先",
    "eqppriority": "設備優先",
    "lotwork": "生產批報工",
    "eqpwork": "設備報工",
    "Platform": "後臺版本",
    "test": "連線測試",
    "update": "更新檢查",
    "localizationList": "語系選擇",
    "zh_CN": "簡體中文",
    "zh_TW": "繁體中文",
    "en_US": "英　　文",
    "vi_VN": "越南文",
    "Version": "版本",
    "standardVersion": "標準版本",
    "fullScreen": "全螢幕",
    "virtualKeyboard": "虛擬鍵盤",
    "msg": {
      "RefreshTimeZero": "畫面更新頻率不得為0",
      "connect.sucess": "連線測試成功",
      "connect.failure": "連線測試失敗",
      "need.update": "伺服器版本為{0}，請更新客戶端",
      "dont_need.update": "伺服器版本為{0}，客戶端不用更新",
      "AttibValue_Setting": "AttibValue必須設定為http開頭",
      "SOP_Setting": "必須先設定SOP"
    },
    "deviceName": "裝置名稱"
  },
  "wp06_sop_list": {
    "open": "開啟",
    "directory": "目錄",
    "msg": {
      "opensopfail": "開啟SOP失敗",
      "cannotfindlotstate": "找不到此批號的現況資料"
    }
  },
  "queryList": {
    "field": "欄位",
    "condition": "條件",
    "date": "日期",
    "number": "數字",
    "value": "數值",
    "condition1": {
      "equal": "等於",
      "nequal": "不等於",
      "contain": "包含",
      "ncontain": "不包含",
      "exceed-equal": "大於等於",
      "less-equal": "小於等於",
      "exceed": "大於",
      "less": "小於"
    }
  },
  "imes_resources": {
    "PROCESSNO": "流程編號",
    "PROCESSNO1": "流程編號",
    "PROCESS NO": "流程編號",
    "AUTOLOTCREATE": "是否自動開立生產批?",
    "CHGPASSWORD": "變更密碼",
    "WIP FAIL BIN": "損壞_等級",
    "ERF_SYSFLOW": "異常作業管理",
    "TO GROUPNO": "To Group No",
    "RECEIVEDATE": "Receive Date",
    "RECEIVEDATA": "資料接收",
    "RECEIVETYPE": "Receive Type",
    "ARE YOU SURE TO ABORT ALL SELECTED RECORDS": "您確定要中止所有選擇的資料",
    "MATERIALWIPRETURN": "線邊倉退料",
    "QCITEMFACTORMAP": "品管項目要因對應",
    "BREAK DOWN NO": "故障編號",
    "NDQUERY": "Nd Query",
    "VAREQPTIME": "變動機時",
    "QCPERIOD": "點檢頻率",
    "ALERTCONFIG": "警示設定",
    "OPDESCRIPTION": "作業站說明",
    "MIN DATE": "最小日期",
    "SUMMARYUSERNO": "總結人員",
    "SPCATTLIMIT": "計數管制內容",
    "PRODUCTION SEGMENT": "生產區段",
    "EXECUTE MO_REPAIR": "生產批執行_工單維修回報",
    "NOT ALLOW TO CLOSE MO": "不允許工單結案",
    "PACKAGETYPE": "封裝型別",
    "THICKTO": "厚度-迄",
    "SOPDETAIL": "標準作業程序明細",
    "MOQUERY3": "工單達交率(準時完工)",
    "MOQUERY2": "工單達交率(準時開工)",
    "PRODUCT TYPE": "產品類別",
    "PRODUCT SPEC": "Product Spec",
    "DIFFERENTS": "新舊密碼需有N個字元不同",
    "DIFFERENCE": "公差",
    "KEYWORD": "關鍵字",
    "LOTBASISDEF_MOTRANS": "生產批定義",
    "KEYNODE": "Key Node",
    "KEYNAME": "名稱",
    "EQPSTATEBASISDEF": "設備狀態設定定義",
    "OPSUBOP": "作業工序",
    "OPSTATE": "作業站現況",
    "OPPROPERTYDEF": "作業站屬性定義",
    "MATERIAL ADJUST": "開立庫存調整單",
    "RELEASETYPE8D": "結案方式",
    "ACCESSORYNO": "配件編號",
    "NOT PASS ARGUMENTS": "必要參數未傳入",
    "EQP QCLIST ONLINE CHECK": "設備線上點檢",
    "THE STATE OF REFERENCE LOT HAS BE CHANGED": "參考批狀態已改變",
    "ONLYTOTAL": "總和",
    "OUTPUTTYPE": "Output Type",
    "OUTPUTINFO": "產出資訊",
    "ACCESSORY ON EQUIPMENT": "已上機配件",
    "ACC PROPERTY": "配件屬性",
    "ISSUEJOBMAPDETAILDEF": "簽核流程對應明細定義",
    "工單作業站資源檢視": "工單作業站資源檢視",
    "8DOUTSOURCE": "外包8D單",
    "LOTLOG_REPORT_FACTORY": "生產批跨廠區歷程明細查詢",
    "LED PAD BONDING": "Pad Bonding檢測資料值登錄",
    "IN COMPONENT COLLECT": "在元件收集下",
    "FIXEDTIMESDEF": "設備定次定時保養設定定義",
    "OPBASIS": "作業站基本資料",
    "QCDATATYPE": "品管資料類別",
    "OPORDER": "顯示順序",
    "ISSUE OPTION": "簽核選項",
    "INVMATERIALOUTDEF": "開立領料單定義",
    "INVMATERIALOUTLOG": "領料單記錄",
    "IMPORT_VARMEASUREDATA": "匯入計量檢測數據",
    "QRSSUMMARY": "8D摘要",
    "EQ STATUS": "設備現況查詢",
    "REFRESHTIME": "更新秒數",
    "PRODUCTNO_MO": "工單產品編號",
    "MATERIALGROUPBASISDATA": "物料群組主檔資料",
    "PROCESSNAME": "製程名稱",
    "OPCLASS": "作業站分類",
    "CALATTRIBNO": "法則計算特性編號",
    "PROCESSDRAW": "流程繪圖",
    "PROCESS_ECN": "流程ECN",
    "PROCESSTYPE": "流程類別資料",
    "OPERROR": "作業站不良原因",
    "SMD_SYSFLOW": "區域管理",
    "SUMMARYDATA": "總結資料",
    "EQPCAPITEMDEF": "設備能力項目維護",
    "MODELVERSION": "模型版本",
    "SUMMARYTIME": "彙整時間",
    "RETICLESETDEF": "配件組定義",
    "BREAKDOWNCREATOR": "故障登錄者",
    "OPGROUP": "作業站群組",
    "ACTIVEMODULE": "出貨模組",
    "RAW_MATERIAL ADJUST": "原物料-調整單",
    "CICREATOR": "登入建立人",
    "PRODUCTLABEL": "產品標籤",
    "MCLASSBASISDEF": "主分類基本資料定義",
    "TEST LOTNO": "測試批號",
    "RAWDATASTATISTIC": "原始資料統計",
    "ATTRIBSEQUENCE": "特性次序",
    "REINSPWITH2NDINSPPLAN": "需以二次檢驗抽樣計劃再檢",
    "MATERIALVENDORCONTACTORDEF": "物料供應商聯絡人定義",
    "PRODUCTPACKINGACCESSORYDEF": "產品包裝配件設定",
    "PRODUCTNO": "產品編號",
    "PRODUCTOP": "產品作業站",
    "ERP QCITEM": "ERP 品管項目",
    "CELLPHONE": "行動電話",
    "BE CONTINUE": "確定要繼續",
    "PRODUCTBASIS": "產品基本資料",
    "MASKGROUP": "光罩群組",
    "IS EXISTED": "已存在",
    "OPNODEGROUPNAME": "作業站節點群組名稱",
    "COEMPLOYEENAME": "員工姓名",
    "PLEASE DEFINE QCITEMFACTOR DATA FIRST": "請先定義品管項目要因資料",
    "CONDITIONSTRING": "Condition String",
    "MOMATERIALRETURNERP_T100DEF": "工單退料至T100 ERP定義",
    "START/END": "開始/結束",
    "STARTDATE": "開始日期",
    "STARTFROM": "起始位置",
    "WIP_SEMI_WAFER": "芯片生產管理",
    "STARTNODE": "起始節點",
    "STARTTIME": "開始時間",
    "MATERIAL RETURN LOG": "退料單記錄",
    "ENDADJUSTFUNCTIONMENU": "結束調整",
    "COMBINEQCITEM": "合併品管項目",
    "AQLTYPE": "AQL 類別",
    "CHARTPARAMETER": "圖參數",
    "LOTHOLDITEM": "生產批異常原因",
    "AQLDATA": "AQL 資料",
    "SERIALNO IS NOT RETURN": "序號未回傳",
    "INSPECTOR": "檢驗人員",
    "FUNLABEL8": "Multi LogOut",
    "FUNLABEL6": "Undo",
    "FUNLABEL7": "Multi LogIn",
    "FUNLABEL4": "Wait",
    "FUNLABEL5": "Reset",
    "FUNLABEL2": "LogIn",
    "FUNLABEL3": "LogOut",
    "FUNLABEL1": "WIP",
    "DISPDEPTNO": "處理部門",
    "TOLERANCEPERIOD": "寬限時間",
    "HOLDTIMESHOW": "異常時機",
    "INPUTVALUE": "輸入值",
    "OUT SOURCE": "外包處理",
    "ACCESSORYSTATEDEF": "模治狀態查詢定義",
    "ACCESSORYSTATELOG": "配件歷史資料查詢",
    "PROCESSTURNING": "流程調整",
    "SURE TO DELET": "",
    "IS NOT SELECTED": "沒有選擇",
    "PRODUCTYIELD": "產品良率查詢",
    "ALLOWCHANGESHOW": "是否允許修改",
    "SUBSTITUTIONTYPEDATA": "備品類別資料",
    "8DMAINTAIN": "維護",
    "CARRIER MANAGEMENT COMP": "載具管理_元件",
    "INVTYPENO": "發票開立方式",
    "SHOWALLDATA": "顯示全部數據",
    "ARRANGE": "自動排列",
    "PRODUCTSNAME": "Product S Name",
    "DTBASISDEF": "DT 定義",
    "EQPCHECKQCLISTDEF": "設備線上點檢定義",
    "SELECTEDLOT": "已選之生產批",
    "SELECTEDBIN": "已選擇的Bin",
    "SELECTEDQTY": "已選片數",
    "OSDETAIL": "外包單明細",
    "REPORTLAYOUT": "報表設計",
    "PMWOHISTORY": "保養工單歷史資料查詢",
    "LOCATIONNAME": "儲位名稱",
    "UPLOADFILES": "上傳檔案",
    "LOCATOR MANAGEMENT": "貨架管理",
    "ABSOLUTE": "絕對",
    "GETLANGUAGE": "擷取語言",
    "MATERIAL OUT LOG": "領料單記錄",
    "INPUTABORT": "作廢原因",
    "RETICLE SET": "配件組",
    "INVENTORY_FGDSTOCKIN_WF_CANCEL": "取消入庫 WorkFlow ERP",
    "SUBSCRIPTIONMANAGEMENT": "訂閱管理",
    "QADEPARTMENT": "驗證部門",
    "LICENSEINFORMATION": "金鑰資訊",
    "CLEAR ALL THE SELECTED RECORD": "清除所選擇的紀錄",
    "WIPPDLINEPOSITIONSTATEDEF": "開線-崗位設定作業",
    "RISKDEGREE": "風險度",
    "IS ERF FILE": "為ERF檔",
    "PARITYBIT": "同位位元",
    "OPSTATE_PRODUCTTYPE": "作業站現況_產品類別",
    "ERPE10ICDSETTINGERROR": "找不到E10ICD相關整合設定資訊或整合設定資訊有誤!",
    "CUR_PACKQTY": "目前裝箱數",
    "INPUTEDATE": "Input E Date",
    "SELECTCOLOR": "挑選顏色",
    "SELECTCOUNT": "勾選總數",
    "ISSHORTRUNCHART": "ISSHORTRUNCHART",
    "QCATTRULEMAPPARAMETERDEF": "計數品管項目與判別法則對應參數設定",
    "ACCPRIVILEGE": "配件狀態權限",
    "SUBCONTRACTORNO": "外包商編號",
    "STOCKER MANAGER": "在製貨架上下架作業",
    "VIOLATESTATECHANGESETMATRIXDEF": "設備狀態互斥設定定義",
    "RELEASEUNITNO": "下線單位",
    "SELECTEDGROUP": "已選的群組",
    "MCLASSBASIS": "主分類基本資料",
    "ARCHIVE": "封存",
    "REFFORMNO": "參考單號",
    "SELECTEDEQPAT": "選擇的設備於",
    "SELECTEDERROR": "已選擇之不良原因",
    "AREAQTY": "面積",
    "AREAEQP": "區域設備",
    "EVENTDESCRIPTION": "事件描述",
    "TURNRUNA": "Turn Run A",
    "TURNINV1": "轉庫",
    "TURNINV3": "轉庫",
    "TURNINV2": "轉庫",
    "TURNERP5": "To ERP",
    "TURNERP4": "To ERP",
    "TURNERP3": "To ERP",
    "NO EQUIPMENT STATE CONTROL": "無可使用之設備狀態",
    "LOCATORMANAGEMENT": "貨架管理",
    "PACKPALLET": "第3層包裝",
    "PMWOITEMNO": "工單項次",
    "QCATTRULEMAPDETAIL": "計數品管項目與判別法則對應明細",
    "UNKNOWN_QTY": "短少數量",
    "MATERIALPROPERTY": "物料屬性",
    "PRDPACKINGRULEBASIS": "包裝規則主檔",
    "SELECTVALUE": "選擇人員",
    "MERGE_BIN": "併批處理",
    "MERGE_LOT": "併批處理",
    "MERGETYPE": "併批類型",
    "RPT LOT LOG": "Log歷史資料查詢",
    "MERGEFLAG": "併箱",
    "COMCOLYES": "是",
    "SAVEGRAPH": "存圖",
    "LOTQTYADJUST_BIN": "生產批數量調整(Bin)",
    "SELECTWAFER": "挑選晶片",
    "MESPARAMETER": "MES參數",
    "FACTORNAME": "要因名稱",
    "INVENTORY_WIPTURNRUNA": "Q Run 挑片",
    "FACTORYNO1": "工廠編號",
    "FACTORYNO2": "廠區編號",
    "FACTORSPEC": "規格要因",
    "CHECKMATERIALFAIL": "物料檢查失敗",
    "EAPSETTING": "EAP整合資料",
    "SELECTPLACE": "選擇扣料點",
    "QCITEMREASON": "品管項目原因",
    "FINALSCRAPQTY": "最後損壞數",
    "WP_8DANALYSISDEF": "原因分析資料定義",
    "ALREADY CLOSE": "CANNOT EXECUTE UNPACKING",
    "OPINPUTQTY": "本站可投入數",
    "8DREASONSUBTYPE": "8D 原因子類別",
    "RO CLOSE": "訂單結案",
    "RULE LOG QUERY": "生產批執行法則查詢",
    "CARRIER CAPACITY IS NOT ENOUGH": "載具容量不夠",
    "INVSEMIOUTLOGDEF": "半成品出庫單紀錄定義",
    "RO BASIS": "訂單基本資料",
    "STARTPRODUCTION": "執行開線",
    "SUBSTITUTEMATERIALLEVELSHOW": "替代料等級",
    "ISAUTOSTOCKINNO": "否",
    "WORKTIMETEMP": "工作日曆樣板",
    "WORKTIMECOPY": "工作日曆複製",
    "WORKTIMEDIFF": "Work Time Diff",
    "DISPORDER": "順序",
    "EMAILSTATE": "E-Mail State",
    "LOTISVALID": "批號有效性",
    "LIMITED TIME CONTROL": "生產時間限制(站與站)",
    "TAPEPROPERTY": "Tape屬性",
    "PRDPARAMTEMPLATE": "生產參數樣版設定",
    "ALREADY EXIST": "已存在",
    "ISAUTOUNLOADACCESSORY": "是否自動下模",
    "DISPHOURS": "工時(hr)",
    "ALERTEVENTBASISCUSTOM": "新增自訂事件",
    "CONDPERIOD": "週期",
    "CLEARING": "清除",
    "WIPLOT_HOTLOTANDPRIORITYCHANGEDEF": "生產批緊急批/優先權調整定義",
    "EQPCONSTRAINT": "禁用設備",
    "DTYPENAME": "類型",
    "DELETEDATE": "刪除日期",
    "CONDFIELD": "條件欄位",
    "DELETEFLAG": "Delete Flag",
    "GETPRODUCTVERSIONFAIL": "無法取得目前產品版本",
    "ACCSERIALNO": "配件序號",
    "CONDITION": "條件",
    "PMWOBASIS": "開立保養工單",
    "INVMATERIALINBASISDATA": "進料單主檔資料",
    "NEWSAMPLEPLAN": "轉換後抽樣計劃",
    "OPCUROUTPUTQTY": "此次產出數",
    "QUERYDATAEDITLOG": "資料修改記錄",
    "COLLECTTYPESHOW": "收集類別",
    "ROWITHOUTCUSTOMER": "訂單無客戶資料",
    "NOTHINGSTATE": "沒有",
    "VIOLATIVESTATENAME": "Violative State Name",
    "ALERTDBTYPE": "警示資料庫類型",
    "SYSFUNCTIONCONTROL": "表單控制項設定",
    "GROUPBYMETHOD": "Group By Method",
    "ARCHIVEBYMO": "依已結工單日期封存",
    "ARCHIVEDATE": "封存日期",
    "INVENTORY_SCRAPSTOCKIN_TPDEF": "不良品入庫至TipTop ERP定義",
    "ARCHIVETYPE": "封存類型",
    "PARK INV": "Park Inventory",
    "ARE YOU SURE TO APPROVE ALL SELECTED RECORDS": "您確定要核准所有選擇的資料",
    "ERFBATCHCREATEBACKGROUND": "批次開立ERF單據是否使用背景自動運行",
    "ITEMPRDREASONMAPIMPORT": "計數品管項目產品原因對應匯入",
    "NO DATA EXIST": "無資料存在",
    "PACK_BOXQTY": "已包裝小箱數",
    "DEVICENO": "客戶料號",
    "EQPTYPEBREAKDOWNMAPDEF": "設備與故障原因對應定義",
    "MSAFREQUENCYBASISDEFINE": "MSA數據量測定義",
    "GENERAL AREA": "一般區域",
    "GENERAL LINK": "一般連結",
    "PMI_QCGROUPDEDUCTIONBASISDEF": "品管群組減項內容設定",
    "ANSRAWDATA": "檢測資料查詢結果",
    "STARTNODEID": "Start Node ID",
    "STARTNODENO": "起始節點",
    "QCITEMFORVARIABLES": "計量品管項目",
    "NETFLOWREMAINCLEAR": "網狀製程殘餘量清除作業",
    "CONDVALUE": "值",
    "UNFROZEN OR UNUSED STATE WILL DIRECTLY DELETE THE RECORD": "狀態為未簽核或不使用將直接刪除",
    "TABLETYPE": "資料表類別",
    "TABLENAME": "資料表名稱",
    "TABLEDESC": "表格說明",
    "MATERIALCHANGEMEMO": "更換材料註記",
    "PLEASE SET UP MO PROPERTY : P_SKIP_MERGE_UFMAP TO Y": "請將工單屬性P_SKIP_MERGE_UFMAP (跳過UFMAP疊圖)設定為Y",
    "DEDUCTIONITEM": "減項",
    "RULESEQUENCE": "法則次序",
    "QUERYPARETO": "柏拉圖分析",
    "APPEND3": "追加",
    "APPEND2": "追加",
    "APPEND1": "追加",
    "HISTOGRAM CHART": "直方圖",
    "STATESHOW": "狀態",
    "APPROVE": "核准",
    "STATETYPE": "狀態類別",
    "SELECTEDPRIVILEGE": "已選的權限",
    "EQPMAINTENANCEPLANSET_MSG": "預定保養日為非工作日：",
    "STATENAME": "狀態名稱",
    "DIFFERENCE_TYPE": "差異類別",
    "QUERYPCHART": "查詢不良率管制圖",
    "EXCLUDE OP": "除外作業站",
    "WIPINVENTORYNO": "在製品庫",
    "PSORDER": "區段次序",
    "FUTURE HOLD RELEASE": "預先異常解除",
    "MONTHLY CHART REPORT": "管制圖月報表",
    "EVENTDATE": "Event Date",
    "ARE NOT ASSIGNED TO THE MO YET": "未發料至工單",
    "EVENTUSER": "Event User",
    "EVENTTYPE": "Event Type",
    "EVENTTIME": "建立日期",
    "THREE SECTION_RYG": "三段(紅黃綠)",
    "THREE SECTION_GYR": "三段(綠黃紅)",
    "SELECTADJUSTDETAIL": "選擇調整單明細",
    "NOT ALLOW ONLY DEFINE A": "不予許只定義一個",
    "CHARTCAPABILITY": "區間製程能力報表清單",
    "STDUSEQTY": "標準用量",
    "EVENT LOG": "事件記錄",
    "PRIORITYPACK": "優先量",
    "INFORMATION": "資訊",
    "SPC_ERFUNRELEASED": "未解除異常單",
    "EQPTYPEBREAKDOWNMAPPING": "設備與故障原因對應",
    "SUBSTITUTION": "備品",
    "FAB PACKING RULE": "FAB 晶圓外箱規格設定",
    "GROUPDEDUCTION": "群組減項",
    "STATISTIC": "統計項目",
    "ABNORMALPOSITION": "不良現象位置",
    "LOTUNITNO": "Lot Unit No",
    "WP_8DACTIONDEF": "行動對策資料定義",
    "MEASURESPEC": "量測物規格",
    "MEASURENAME": "量測物名稱",
    "MEASUREDATE": "Measure Date",
    "TO HOSTNO": "To Host No",
    "QCITEM_ADELETE": "刪除計數型品管項目量測記錄",
    "AREA INV MAP": "區域庫房基本設定",
    "CHART ALL CAPABILITY BY FACTOR": "製程能力報表_以要因查詢",
    "PROGRAMNO": "測試程式編號",
    "EACONTROLLER": "控制器名稱",
    "PRDAPSINTEGRATIONDEF": "APS整合",
    "MCLASSNO": "主分類編號",
    "PDDESCRIPTION": "產品規格",
    "AFTERMOVINGDATAWILLNOTBEABLETORESTORE": "資料搬移後將不可還原",
    "MTLSTATE": "發料狀態",
    "WORKFLOW_QC": "Workflow_QC",
    "HAVE BE DEFINED": "已定義",
    "LOTCHOICEEQPDEF": "生產批選用生產設備定義",
    "PRODUCTDATAIMPORT": "產品匯入",
    "GETALLDATA": "擷取全部",
    "REMOVEBAR": "Bar移除",
    "CHART SIGNBOARD": "管制圖看板",
    "HIDE GROUP BOX": "隱藏群組方塊",
    "EQUIPMENTREASONBASIS": "設備原因基本資料",
    "PRDSOPFILEPATH": "指導書路徑",
    "MOCLOSE_TP": "工單結案_TipTop ERP",
    "MOCLOSEDEF": "工單結案定義",
    "SYSMODULE": "系統管理",
    "8DACTIONVERIFY": "驗證對策資料",
    "WIP RETURN LOT COMP_LED": "線上退料_LED",
    "PLUCK_PAD": "Pluck Pad",
    "WAFERIQC": "晶圓進料檢驗",
    "WAFER_ID": "Wafer ID",
    "STOCKERBASISDEF": "在製貨架基本資料定義",
    "CONFIGSETTING": "Config 設定",
    "LOTCHANGECOMP_LED": "生產批換片",
    "HIAIRPASSWORD": "HiAir密碼",
    "RPT_ON_REASONTOPTENDEF": "十大不良原因查詢定義",
    "PRDTYPE": "產品類別",
    "PASSWORD": "密碼",
    "REFERENCELOTQUERY": "參考批查詢",
    "WIPOSCONFIRMDEF": "外包單確認定義",
    "MNODENO": "節點編號",
    "INVMATERIALWIPRETURNCONFIRM": "退料單確認(WIP)",
    "BILLBOARD_OPOUTPUTSUMMARY": "作業站時段產出看板",
    "OSBASISDEF": "外包單",
    "ACCSPAREQTY": "壽命上限",
    "PREVIEW": "預覽",
    "ENGLISH CHARACTER": "英文字元",
    "PROCEED": "繼續",
    "PROCESS": "流程",
    "PRODUCT": "產品",
    "PRODROW": "Product Row",
    "EQP ACC STATE": "配件狀態設定",
    "PROGRAM": "測試程式",
    "BELONGTOTYPE": "所屬類別",
    "THIS PRODUCT IS EMPTY NOW": "目前該產品的生產參數為空值",
    "BELONGTOMONO": "所屬工單編號",
    "GROUPBASISDEF": "群組基本資料定義",
    "HAVE NOT ANY ATTRIBUTE TO CHANGE": "沒有特性值被改變",
    "QCITEM_G_A_ORDER": "計數品管項目_群組",
    "T_15101800": "T_15101800",
    "QCITEMPARAMETERDEF": "品管項目參數定義",
    "NODEID OR SCRIPT MUST DEFINE ONE": "節點編號或描述語言必需定義一個NodeID or Script must define one",
    "ONLY CAN DEFINE ONE DEFAULT AREA": "只能定義一個預設區域",
    "IMPORT_QCCHARTBASISDEF": "匯入管制圖內容定義",
    "GENERAL CLASS": "一般類別",
    "MORELEASEQTY": "工單已下線數量",
    "SETLIMITLINE": "界線設定",
    "LOGGROUPSERIAL": "Log序號",
    "INVSEMIINBASIS": "半成品進料單主檔",
    "UNQUALIFIED": "不合格",
    "RULEINDEX": "明細編號",
    "CONFIRMED": "已確認",
    "PRIVATE": "私有的",
    "STOCKONFINISHED": "已上架",
    "NORMALIZATION": "正規化",
    "YEARDEF": "年度定義",
    "UNIONPRODUCTNO": "聯產品編號",
    "INVMATERIALOUTCONFIRM": "領料單確認",
    "SYSTEM MODULES": "系統模組",
    "DISPDESCRIPTION": "處置說明",
    "PACKSERIAL": "包裝編號",
    "PACKSETING": "裝箱設定",
    "BILLBOARDTIMESTEPBASIS": "產出看板時段主檔",
    "FROM GROUPNO": "From Group No",
    "RULECLASS": "法則分類",
    "ALARMTIME": "警告鈴聲長度",
    "LABELTYPESHOW": "標籤類型",
    "ALARMMAIL": "警示Email",
    "BIN CONFIG": "BIN 設定",
    "HAVE NOT ANY AVAILABLE DATA": "無可用的資料",
    "MISCARRIAGE": "誤判",
    "FLOWBASISDATA": "系統建模",
    "FGDSTOCKIN_TP": "入庫至TipTop ERP",
    "FGDSTOCKIN_WF": "入庫至WorkFlow ERP",
    "LOT MUST HAVE COMPONENT": "生產批必需要有元件",
    "WAITINFO": "等待資訊",
    "WAITING1": "Waiting",
    "WAITDATA": "等待說明",
    "ERFPRINT": "異常單列印",
    "PLEASE SELECT PARAMETER": "請選擇參數",
    "WAITTYPE": "Wait Type",
    "WAITTIME": "等待時機",
    "EXECUTIONFILE": "執行檔",
    "WAITQCQI": "檢驗單品管項目清單",
    "PLEASE EXECUTE CLOCK-IN FIRST": "請先執行上工",
    "EXECUTIONMODE": "執行方式",
    "RERUNLOSSQTY": "重新上線遺失數",
    "CALLEDINFO": "被呼叫端資訊",
    "EXPORT EXCEL COLUMN CAN NOT BE DELETE": "匯出Excel欄位無法被刪除",
    "SCRAPCOMPDETAIL": "報廢明細",
    "SN_B_SERIALLENGTH": "小箱編碼序號長度",
    "WAS SETUP ALREADY": "已經設定",
    "QUERYRESULT": "查詢結果",
    "PACKSETSETUP": "設定",
    "UNPRODUCTIVE": "非生產性",
    "ERFSTATE": "異常單狀態",
    "WAIT LOT": "等待生產批查詢",
    "MTL TYPE": "物料類別資料",
    "DEFINESCRIPT2": "定義描述語言",
    "DEFINESCRIPT1": "定義描述語言",
    "CONDDATATYPE": "資料類別",
    "ERFLOTMERGE_COMPONENT": "異常單併批_元件",
    "QCSETTINGBYOBJECT_TIP04_REASON": "4. 請於選取品管項目後，勾選相關原因編號，點擊套用按鈕",
    "EXPORTEDERP": "已拋轉ERP",
    "SELECTSUBPROCESSASNODE": "選取子流程",
    "EARLYFINISHMOTOTAL": "提前完工單數",
    "ERFQUERY": "異常單查詢",
    "STDUNITEMPTIME": "標準單位工時",
    "QCITEMATTSETTING": "計數型品管項目設定",
    "INVENTORY_FGDSTOCKIN_TP_CANCELDEF": "取消入庫至TipTop ERP定義",
    "CURPROCESSNO": "目前流程編號",
    "QUERYCONDITION": "查詢條件",
    "USER EXCEPTIONITEM": "除外工時項目基本資料",
    "RETURNMATERIAL2MOSUCCESS": "還原工單退料成功",
    "AUTOREPORTNO": "自動寄送報表編號",
    "CLOSESTATE": "結案狀態",
    "NOT HAVE ANY PACKED DATA": "NOT ALLOW EXECUTE",
    "EQPREALTIMEREPORT": "設備現況查詢",
    "RULE_WAIT": "等待單",
    "REMAIN CAPACITY": "剩餘可使用大小",
    "RULE_HOLD": "異常單",
    "RECEIVEERROR": "請選擇接收失敗資料",
    "ECNLOG": "ENC 紀錄",
    "ECNNO1": "工程參數編號",
    "EQP BREAKDOWN REGISTER": "設備故障登錄",
    "IS NOT ACTIVE": "未簽核",
    "DUTYMEMBER": "負責人",
    "EDIT_L": "修改(&E)",
    "EDIT_S": "修改",
    "EDIT_P": "修改(&E)",
    "EDITQC": "調整項目",
    "EDITOR": "修改者",
    "MAINSOURCEPARTNO": "Main Source Part No",
    "NOT ALLOWED TO DELETE": "不允許刪除",
    "EXECUTOR": "回報人",
    "EXECUTED": "已執行",
    "RECIPE BASIS": "設備參數資料",
    "TOTAL_CARTONQTY": "總大箱數量",
    "EQPLOCATORSTATUS": "儲位狀態資訊",
    "GETLANGUAGEDEF": "擷取語言定義",
    "PLEASE CHECK CONTROL LIMITS ARE SETTED OR NOT.": "請確認是否有設定管制界限",
    "RULEPHASE": "法則階段",
    "CHKSHOWERFPOINT": "Check Show ERF Point",
    "CAPVALUE": "設備能力值",
    "ERP DOCUMENT LOG": "ERP單據還原作業",
    "ERFUNRELEASEDDEF": "未解除異常單定義",
    "ENGNO1": "工程編號",
    "ENGNO2": "工程編號",
    "ENCODE": "編譯",
    "ONLY OP NODE CAN GROUP": "只有OP節點可以群組化",
    "ENABLE": "啟用",
    "QCITEMDELETEFORATTRIBUTESDEF": "刪除計數型品管項目量測記錄定義",
    "REDICLESETDEF": "Redicle Set Def",
    "ERFCLOSE": "結案",
    "REDTCONNECTTIMER": "重新連線時間間隔",
    "HOLD DISP GROUP": "異常處理群組",
    "ELSEIF": "ElseIF",
    "EQP PM": "設備保養",
    "EQPLOG": "設備歷程",
    "EQPOFF": "非稼動",
    "EQUAL1": "=",
    "ERFABORT": "異常單報廢",
    "EQC_RT": "電信(EQC)抽測重測",
    "LOCATION1": "位置",
    "RECEIVETIMER": "接收時間間隔",
    "ERROR1": "錯誤",
    "LOCATORNO": "儲位編號",
    "LOCATORIN": "上架",
    "ERFBASIS": "異常單資料",
    "ERFQTY": "異常單數量",
    "STATENORMAL": "State Normal",
    "MO BASIS CHIP": "工單開立_CHIP",
    "_EMS_EQPCAPBASIS": "設備能力項目主檔",
    "MATERIALQCITEM": "物料品管項目",
    "NOTCLOSED": "未封箱",
    "ECNSTEP4BTNNEXT": "下一步",
    "CREATE PAGE": "Page開立",
    "MINLAGTIME": "最小等待時間",
    "MOMATERIALRETURNERP": "工單退料ERP",
    "SHIFTINSPECTION": "每班檢",
    "ARE YOU SURE TO UPGRADE": "您確定要升級",
    "MUST BE BOOLEAN": "需為布林值",
    "INVFGDINVENTORY": "成品庫庫房資料",
    "CAN NOT SETUP OPS PRODUCTION PARAMETERS": "不能設定作業站生產參數",
    "STARTTIMETO": "結束時間",
    "SPLITMERGERECORD": "分併批記錄",
    "ALREADY HAS LOT CARRIER CANT STOCKON": "已經放置生產批，故無法放置載具",
    "WP_8DACTIONVERIFY": "驗證對策資料定義",
    "IF YOU CHANGED SMTP CONFIG BEFORE TEST": "YOU MUST CONFIRM OR APPLY FIRST",
    "CLOSEDATE1": "結案日期",
    "EXPAND": "展開",
    "EXPORT": "匯出",
    "EXITOP": "離開點",
    "EXCEPT": "除了",
    "COPYRIGHT_": "Copyright iMES corporation. All rights reserved.",
    "IMPORTLEDCOMPONENTPIQTY": "匯入LED元件PI數量",
    "RULE NODE": "法則節點",
    "PLEASE DELETE ALL LINKS BETWEEN SELECTED NODES": "請在已選擇節點間刪除所有連結",
    "FGDSTOCKIN_T100": "入庫至T100 ERP",
    "ONLY ONE DATA CAN BE SET UP AT ONCE": "一次只能設定一筆資料",
    "LIMITEDTIMECONTROL": "生產時間限制(站與站)",
    "LAST_PCSQTY": "尾數箱數量",
    "WP_8DMAINTAINDEFINE": "8D矯正單維護資料定義",
    "NEWTOTALQTY1": "調整後總數",
    "HOLDDISPGROUPUSER": "異常處理群組人員",
    "CAPACITY": "批量限制",
    "FORMNAME1": "表單名稱",
    "HOLDDISPGROUPDATA": "異常處理群組資料",
    "MATERIAL TYPE BELONGS MATERIALS": "物料類別與所屬物料",
    "SN_C_SERIALLENGTH": "大箱編碼序號長度",
    "HOLDITEMBASISDEF": "異常原因基本資料定義",
    "QCITEM OF VARIABLES": "計量品管",
    "ASSETNO": "財產編號",
    "EQUIPMENTLOTSTATECONTROL": "設備狀態變更",
    "PRIVNOSTATE": "我的最愛權限",
    "WIPSTATEREPORTDEF": "產品作業站現況查詢定義",
    "WIPSTATEREPORTOUT": "產品作業站現況產出",
    "TAKEOUTPLACE": "扣料點",
    "LOTNOTEXIST,LOTVALIDCANNOTBEUSED": "請注意此生產批不存在，故「批號有效性管制」之品管項目無法使用",
    "MUST BE THE SAME": "需相同",
    "MTLINKLOTBASISADD": "Material Ink Lot Basis Add",
    "HAVECONTENT": "架位狀態",
    "GENERALLOGIN": "一般介面",
    "PMWO BASIS": "開立保養工單",
    "INVMATERIALINBASISDEF": "進料單主檔定義",
    "STATISTICALINFO": "統計分析資訊",
    "COMPONENT ATTRIB NO": "元件特性編號",
    "BINBASIS": "Bin基本資料",
    "CAPACITYCTRL": "是否管制容量",
    "CAPACITYFULL": "可加工批量已達上限",
    "FGDSTOCKIN_E10ICD_CANCEL": "取消入庫 E10ICD ERP",
    "EQPCONSUMESTATUSLOG": "機台耗品歷程",
    "EQPCONSUMESTATUSDEF": "機台耗品現況定義",
    "QCFORMNO": "檢驗單編號",
    "SYSTEMTABLEMAPSELECT": "新增至資料表對應",
    "ACCESSORYINSPECTION": "換模檢",
    "E-MAIL": "電子郵件",
    "EQUIPMENTFAVORITEDEF": "過帳設備設定定義",
    "TIMEUPACTION": "時間到之動作",
    "EXECUTERESULT": "執行結果",
    "SIMULATION": "模擬",
    "SUBSTITUTIONTYPE": "備品類別資料",
    "LANGUAGE": "語言",
    "FACTORYBASIS": "工廠基本資料",
    "SUBSTITUTIONNAME": "備品名稱",
    "BINGRADE": "Bin 等級",
    "E10ICD": "E10ICD",
    "INVPROPERTYDATA": "庫房屬性資料",
    "PRODUCTOPBUSINESSRULEDRAW": "企業邏輯設定",
    "LANFINISH": "Lan Finish",
    "PRDDEFAULT_QCITEMAUTOCHECKED": "品管項目是否預設勾選",
    "JOBNAME": "工作名稱",
    "WOSTATUS": "狀態",
    "UPDATEMTLOPNO": "是否忽略生產批下線物料檢查?",
    "JOBTYPE": "工作形式設定",
    "QC_SYSFLOW": "品質管理",
    "CASSETTE": "Cassette",
    "YAXISFROM": "Y座標下限",
    "QUERYPCHARTSIGNBOARDDEF": "不良率管制圖看板定義",
    "BINORDER": "Bin 順序",
    "HIAIRSERVER": "HiAir伺服器",
    "INSTRUCTIONS": "說明書",
    "MATERIALBASISDEF": "物料基本資料定義",
    "THE SELECTED LOTS MUST EXECUTED TRIGGER TRANSACTION": "生產批必須執行Trigger OP",
    "BILLBOARD_OPOUTPUTSUMMARY_GAUGE": "作業站時段產出_良率儀表板",
    "ARCHIVECONFIG": "封存設定",
    "DISPDESCRIPTIONFREQUENCY": "處置說明分布",
    "FACTORYNO_MO": "工單工廠編號",
    "BINSTATE": "Bin 狀態",
    "ALL MEASURE DATA MUST HAVE US AND LS": "所有量測資料必須有 US 與 LS",
    "INVPRODUCTINLOG": "成品入庫單記錄",
    "INVPRODUCTINDEF": "開立半成品入庫單定義",
    "MOMATERIALRETURNERP_T100": "工單退料至T100 ERP",
    "WORKFLOW": "Workflow",
    "WORKDATE": "Work Date",
    "WORKTIME": "廠區工作日曆",
    "WORKYEAR": "Work Year",
    "OPNODEGROUPBASISDEF": "作業站節點群組主檔定義",
    "QC CHART BASIS": "管制圖內容",
    "FORWARDERNO": "貨運行",
    "BR_L_CO_GEN": "企業邏輯 - 生產登錄介面(Check Out)",
    "BINVALUE": "Bin 值",
    "LOTCOMPONENTPROPERTY": "生產批元件屬性",
    "REVERSETYPESHOW": "還原類型",
    "CURSORMODESHOW": "游標模式",
    "BR_L_CI_GEN": "企業邏輯 - 登入介面(Check In)",
    "TEXTCOLORSETTING": "文字色彩設定",
    "CLOCKIN_AUTOCLOCKOUT": "上工時自動下工處理",
    "OCAP NODERELATIONERR": "請確認OCAP異常編號節點設置",
    "QCITEMSELECT": "品管項目選擇",
    "APPLYSTATENAME": "使用狀態說明",
    "STOCKERNO": "貨架編號",
    "INVLOCATORNOEDIT": "儲位編號編輯",
    "DELLATEST": "刪除最後一筆",
    "PLEASE SELECT ONE AT LEAST": "請選擇至少一項",
    "MACHINE": "機械",
    "LICENSE EXPIRED DATE": "授權到期日",
    "PARTIALMESSAGE1": "此作業站為部分報工模式，不允許調整企業邏輯。",
    "EXECUTERESULT2": "執行結果",
    "EXECUTERESULT1": "執行結果",
    "HAVING LOT IN WIP INVENTORY": "仍有生產批於WIP倉",
    "ENDFINISHDATE": "到完成日期",
    "OCAPNO ERROR": "OCAP異常原因須全部設定OCAP編號或全部不設定OCAP編號",
    "ACCVIOLATESTATECHANGESET": "配件狀態互斥設定",
    "INVSCRINDETAIL": "不良品入庫單明細",
    "NON-TRANSFERABLE": "不可轉換",
    "NEWPROPERTYVALUE": "新屬性值",
    "CIMTLDBCHECK": "生產批CI過帳料批檢查",
    "CARTONWEIGHT": "箱重",
    "SPC ONLIE CONTROL CONTINUE": "SPC 量測數據收集_計量連續",
    "ECN WIZARD": "ECN 設定精靈",
    "PLEASE SELECT ATTRIB PHASE": "請選取特性階段",
    "INSPMACHINE": "檢測機台",
    "MAXTIME": "預設產能",
    "MAXWLD1": "最大波長",
    "MAXIMUM": "最大值",
    "CONT_MATERIAL_ADJUST": "生產批作業站用料記錄調整",
    "MAXLOP1": "最大亮度",
    "BREAKDOWNLEVEL": "故障等級",
    "IT IS NOT ENOUGH FOR MONO": "工單發料不足",
    "SCRIPT QUERY RESULT MUST CONTAIN THE REQUIRED FIELDS": "描述語言查詢結果必須包含必要欄位",
    "INSERTNAME": "插入點名稱",
    "CARTONNO": "大箱編號",
    "SELREASONNO": "已選取",
    "INVSEMIIN": "開立半成品進料單",
    "FABPRSSTAGEBASIS": "製造層別設定",
    "INVMATERIALINBASIS": "進料單主檔",
    "BREAKDOWNBASIS": "故障原因基本資料",
    "INVENTORY_WIP_SEMIDEF": "在製品庫_半成品調帳",
    "INVRAW_ACCLIMATION": "退冰作業(膠)",
    "INVMATERIALRETURNBASIS": "退料單主檔",
    "INVMATERIALWIPRETURNLOG": "退料單記錄(WIP)",
    "INVMATERIALWIPRETURNDEF": "開立退料單(WIP)定義",
    "BREAKDOWNCAUSE": "故障原因",
    "INVPREORDERBASISDEF": "預訂單主檔定義",
    "SCRAP QTY": "損壞數量",
    "SCRAP INV": "廢品庫",
    "PLANNOWAFER": "Wafer計劃編號",
    "DTMODULE": "資料收集器模組",
    "ACCESSORYMAINTENCE": "維修作業",
    "SCRAPTYPE": "報廢判斷方式",
    "WOITEMNO": "工單項次",
    "SCRAPLIFE": "報廢壽命上限",
    "SAMPLERULEDEF_FAB": "抽樣規則定義_FAB",
    "MESPARAMETERDEF": "MES參數定義",
    "VAR REPORT": "計量型報表",
    "TO PMITEMNO": "To PM Item No",
    "EXPORT TIME": "",
    "CAN NOT DELETE": "不能刪除",
    "INKLOTBASIS": "INK Lot Basis",
    "NO SAMPLEQTY": "無抽樣數",
    "LOTBASISDEF_BATCH": "生產批開立_批次",
    "CAN NOT DEFINE": "不能定義",
    "HOLD LOT": "異常生產批查詢",
    "HOLDCOLLECTBY": "異常原因收集依",
    "DEPTNAME": "部門名稱",
    "HOLDITEM": "異常原因",
    "HOLDLOTS": "異常",
    "HOLDDATE": "異常時間",
    "BREAKDOWNQUERY": "故障原因統計",
    "AT LEAST ONE BIN MUST BE SAMPLED": "至少需要選擇一個等級抽樣",
    "HOLDTIME": "異常時機",
    "HOLDUSER": "異常人員",
    "TO RONO": "To RO No",
    "TO OPNO": "To OP No",
    "EDITFLAG": "是否編輯",
    "EDITFALG": "是否編輯",
    "YAXISTO": "Y座標上限",
    "FACTOR": "要因",
    "FAILQC": "不良",
    "SUBSTITUTIONBASIS": "備品基本資料",
    "FANAME": "FA Name",
    "RETURNEQPACCESSORYDEF": "配件歸還定義",
    "QUERYDATABYLOTNODEF": "Lot 檢測資料定義",
    "DUTYMEMBERNAME": "負責人姓名",
    "ENVIRONMENT": "環境",
    "PUTINPLACETYPESHOW": "投料點類別",
    "APPLICATIONLAYER": "應用程式集",
    "MO DATA": "工單資料",
    "TO_OPNO": "目的作業站編號",
    "MO SEMI": "工單半成品",
    "MO UNIT": "工單單位",
    "MO TYPE": "工單類別",
    "SUBSTITUTIONGROUP": "備品群組資料",
    "BREAKDOWNSTATE": "故障狀態",
    "NEWCOMPONENT": "產生元件",
    "VENDORNO": "供應商編號",
    "FGDINV": "成品庫",
    "WIPOSDETAIL": "外包單開立明細",
    "BREVENTTIME": "BR 執行時間",
    "BREAKDOWNTIMES": "故障次數",
    "PRODUCTSEARCHDEF": "產品內容查詢定義",
    "EXPTEMPDOC": "匯出編碼樣版",
    "INSPTYPE_IPQC": "巡檢",
    "FILE03": "檔案3",
    "FILE02": "檔案2",
    "FILE01": "檔案1",
    "FILE05": "檔案5",
    "FILE04": "檔案4",
    "FILTER": "篩選條件",
    "T_03100530": "T_03100530",
    "ACCESSORYREPAIR1": "叫修作業",
    "EQPMATERIALSTATE_TURN": "設備存料移轉",
    "FGDSTOCKIN_TP_CANCEL": "取消入庫至TipTop ERP",
    "TOVALUE": "終止值",
    "IRPT_PANELAUTOHIDECONTROL": "",
    "LIMITSTRING": "密碼中不可出現下列字串(用逗點隔開)",
    "WIPOSBASISDEF": "外包單開立定義",
    "ENGPROPERTY": "工程資料屬性",
    "ARCHIVEBYDATE": "依日期條件封存",
    "REPAIRBASISDEF": "維修項目基本資料定義",
    "FLOWNO": "程序編號",
    "EQPSTATESTATISTICSDEF": "設備狀態期間統計查詢定義",
    "PLOT_CHECK_OUT_PROCES": "出站作業",
    "SELECTALLFORM": "全選表單",
    "FOUPNO": "Foup 編號",
    "OPTPRODUCTNO": "產品編號選項",
    "LIFELIMIT": "壽命上限",
    "TO RECIPETEMPNO": "To Recipe Temp No",
    "FULLFILENAME": "檔案路徑",
    "FORMNO": "單號",
    "INPUTMATERIALNO": "刷入料號",
    "LIFESTATE": "剩餘壽命",
    "LOAD EQP ACCESSORY": "上模作業",
    "RPT_LOTLOG": "生產批歷史資料_快取",
    "CREATEBYQTY": "批量開批",
    "QUALITYFILES": "品質檔案",
    "ALARMSETTING": "警告鈴聲設定",
    "APPLIED ACCESSORY": "在線配件",
    "TONODE1": "下一個流程節點",
    "FRIDAY": "星期五",
    "SELBINPROFILE": "挑選規格",
    "FROMOP": "來自作業站",
    "TOOLQTY": "工具數量",
    "TOOLING": "配件",
    "TOOLDEF": "工具定義",
    "36STYLE": "36進位",
    "CREATEDATE1": "建立日",
    "CREATEDATE2": "建立日",
    "FVALUE": "F值",
    "CHECK DATABASE NAME FAIL": "檢查資料庫名稱失敗",
    "ACCESSORYCATEGORYDATAIMPORT": "配件分類資料匯入",
    "CREATEGRRNO": "產生單號",
    "TOLOTNO": "To 批號",
    "PMSOPSERIALNO": "標準作業程序序號",
    "MUST BE EQUAL TO": "必須等於",
    "TOMLINE": "To Mline",
    "OBJECTAREATYPE": "物件區域類別",
    "LIMITTARGET": "界限值",
    "NOT NEED CLEARED": "不須清洗",
    "RPTLOGSERIAL": "Report Log Serial",
    "SPC_COADEF": "出貨報告定義",
    "RPT_ON_PRODUCTIONDEF": "產品產能查詢定義",
    "SUBPROCESS": "子流程",
    "QUERYMONTH": "查詢月",
    "MOCLASS": "工單分類",
    "MOCLOSE": "工單結案",
    "LOGOUTCOMMENT": "登出註記",
    "CLOCKSTATUS": "上下工狀態",
    "BREAKDOWNDESCRIPTION": "故障描述",
    "MOBASIS": "工單基本資料",
    "ORGROUPNO": "Or群組編號",
    "CREATELOTNO": "產生批號",
    "PERCENT": "百分比",
    "ISSUESTATEDETAILDEF": "進行簽核",
    "SHIPPINGDEF": "出貨基本資料定義",
    "MOPROPERTYDEF": "工單屬性定義",
    "MODELNO": "型號",
    "MODULES": "模組",
    "ARCHIVEBEFOREMONTHS": "自動封存多久以前的數據(月)",
    "MONITOR": "監控器",
    "MONOSEQ": "派工順序",
    "BREAK DOWN BASIS": "故障原因",
    "EUIPMENTINSPECTIONALTEREVENTMAILSUBJECT": "[設備點檢單] 待補檢通知",
    "ONLY CAN DEFINE ONE": "只能定義一個",
    "ADDPIC": "新增",
    "ADD_PS": "新增(&A)",
    "ADJUST": "調帳",
    "IS NOT ENOUGH": "不足",
    "MOMATERIALSTATE": "工單存料現況",
    "NEW LAYOUT": "新配置",
    "ABORT1": "中止",
    "PACKOIPATH": "指導書路徑與檔名",
    "QCMATERIALSPECDEF": "物料規格設定定義",
    "AGENTS": "代理人",
    "TABLE_NAME": "資料表名稱",
    "CONT_ATTRIB_ADJUSTVALUE_LOT": "生產批特性值調整",
    "EQPCAPBASIS": "設備能力項目設定",
    "FACTORNO": "要因編號",
    "FACTOR_V": "收集要因",
    "FACTOR_A": "收集要因",
    "ACCEPT": "允收",
    "ACCMIN": "回溫時間",
    "ACCMAX": "回溫時效",
    "ACCTNO": "帳戶編號",
    "ACCQTY": "總加工次數",
    "SPLITDETAIL": "分批明細",
    "SHOWSOPDETAIL": "顯示明細資料",
    "PACKOPERATIONMODE": "包裝作業模式",
    "ACTIVE": "已簽核",
    "ACTION": "動作",
    "ALLLOT": "所有生產批",
    "MOVABLE": "可移動",
    "GETAPSERVERTIME": "取得AP Server目前時間",
    "MOVEPS2": "<<",
    "MOVEPS1": ">>",
    "MOVEOP2": "<<",
    "MOVEOP1": ">>",
    "LOTCREATE": "開立生產批",
    "MOINPUT": "工單輸入",
    "MATERIALINDETAIL": "進料單明細",
    "TPERPUSEMESUSERNO": "使用MES帳戶產生TP ERP單據",
    "REPORTDBTYPE": "資料庫類別",
    "PRDDEFECTLOG": "Product Defect Log",
    "LOTCURQTY": "批量",
    "MOSTATE": "工單狀態",
    "SPC CONTROL": "SPC 管制",
    "STARTPERIOD": "開始期間",
    "REFERENCEVERSION": "參考版次",
    "QRY_TYPE": "查詢類型",
    "EQPOFFTIME": "非稼動時間(分鐘)",
    "COEMPLOYEENO": "員工編號",
    "FIELDVALUE": "欄位值",
    "ELEMENTTYPE": "特性類別",
    "ELEMENTNAME": "特性名稱",
    "ACCSHOWPROP": "配件顯示屬性",
    "MATERIAL VENDOR": "物料供應商",
    "CREATE_TIME": "建立時間",
    "ELEMENTDATA": "特性資料",
    "MOTOTAL": "工單總數",
    "AVGVF1": "平均亮度",
    "AVGVF3": "平均正向電流",
    "AVGVZ1": "平均電壓",
    "AVGIR1": "平均逆向電流",
    "INV_SYSFLOW": "庫房管理",
    "ATTRIBTYPESHOW": "特性類別",
    "INVPREORDERCONFIRM": "預訂單確認",
    "UNITMEASURE": "計價單位",
    "ATTACH": "附件",
    "ATTRIB": "特性",
    "PREPAREMATERIAL": "備料中",
    "QUERYSTATE": "查詢現況 (線上批+線邊倉生產批)",
    "TESTSCRIPT": "描述語言測試",
    "MOQUERY": "工單查詢",
    "R_IDLETIME": "R Idle Time",
    "AQLDEF": "AQL 定義",
    "ARTYPE": "計價方式",
    "CARRIERCATEGORYDEF": "載具分類資料定義",
    "SHIFTGROUPNAME": "班別組成名稱",
    "AREANO": "區域編號",
    "WIPFAILBIN": "損壞_等級",
    "TOTALSAMPLEQTY": "總抽樣數",
    "OPRUNTIME": "作業站作業時間",
    "EXECUTE_ESOP": "是否啟用eSOP功能",
    "APPEND": "追加",
    "PEELING": "Peeling",
    "NOT ALLOW TO SELECT TIME LIMIT CONTROL SETTING": "不允許設定中間站點觸發異常",
    "NECESSARY CONDITION": "必選條件",
    "ASSIGN": "指定",
    "INPUTDATACOUNT": "輸入個數",
    "CONNECTIONMONITORDEF": "連線狀況定義",
    "EXECUTESTATE": "執行狀態",
    "PENDING": "簽核中",
    "THURSDAY": "星期四",
    "PREORDERDETAIL": "預訂單明細",
    "ERFLOTSPLIT_BIN": "異常單分批_等級",
    "INSTRUMENTTYPEDEF": "儀器類別定義",
    "LOTCHANGE": "位置狀態切換",
    "RPT_SCRIPTDEF": "描述語言報表查詢定義",
    "VALIDMINUTE": "有效時間(Min)",
    "HAS PM PLAN TODAY": "今日已安排設備保養計畫",
    "MOTYPEBASISDEF": "工單類別設定定義",
    "NODISPATCH": "未派工",
    "PMITEMNAME": "保養項目名稱",
    "CONT_ATTRIB_ADJUSTLOGQUERY": "生產批作業站製程特性值調整記錄查詢",
    "INVALIDDATE": "失效日期",
    "TOPENDING": "簽核中",
    "EQP SOP NUMBER": "Equipment SOP Number",
    "COCREATOR": "登出建立人",
    "DEFECT": "缺點",
    "DEFINE": "定義",
    "DEDIT3": "修改",
    "MO STATE REPORT": "工單現況資訊查詢",
    "CHART LINE EDIT LOG": "管制線修改紀錄",
    "DECODE": "解譯",
    "DELETE": "刪除(&D)",
    "DEL_PS": "刪除(&D)",
    "ENDCREATE": "到建立日期",
    "AREA SHOW": "區域查詢",
    "DETAIL": "明細",
    "DESC_D": "說明",
    "AREA CODE": "區碼",
    "CONDOPERAND": "運算元",
    "USED​​VERSION": "",
    "ESTIMATEDDATE": "預估保養日期",
    "DISCONTINUED": "暫停",
    "DEPARTMENTDEF": "部門定義",
    "EXECUTEORDER": "執行次序",
    "RAW_PRE ORDER": "原物料-預訂單",
    "EQUIPMENTSTATECHANGEDESCRIPTION": "設備狀態變更原因描述",
    "EXECUTEAPS": "啟用APS",
    "GROUPPRIVILEGE": "群組權限設定",
    "EXECUTE MO": "生產批執行_工單移轉",
    "DIEIQC": "Die IQC",
    "DGRADE": "降級",
    "PLZINPUTVATTESTVALUE": "計量值輸入不完全",
    "QCSETTINGBYOBJECT_TIP05": "5. 請於選取品管項目後，勾選對應的作業站，點擊套用按鈕",
    "QCSETTINGBYOBJECT_TIP01": "1. 請於輸入產品編號後按下Enter鍵，或點擊確定按鈕",
    "QCSETTINGBYOBJECT_TIP03": "3. 請於選取品管項目後，勾選相關要因，點擊套用按鈕",
    "QCSETTINGBYOBJECT_TIP02": "2. 請於表格中填寫品管項目相關資訊",
    "RESOURCEQUERY_BYMO": "工單耗用資源檢視",
    "OP MATERIAL STATE": "作業站存料現況查詢",
    "ENDTIMEFROM": "從",
    "SYSTEM PRIVILEDGE": "系統功能",
    "BASEAREANO": "基底區域編號",
    "ANSSCATTERCHART": "散佈圖",
    "ORGCARRIERTYPE": "原載具類別",
    "EQP MATERIAL STATUS": "設備上料現況查詢",
    "SESSIONTIMEOUT": "閒置Session自動清除(分鐘)",
    "PLANFINISHDATE": "預計完工日",
    "INVREMARK": "發票備註",
    "PLANFINISHTIME": "預估完成時間",
    "ERFHANDLESUGGESTION": "異常單即時處置建議",
    "ASSIGNBINNO": "指定Bin",
    "AREASHIFT": "區域班別",
    "DTTYPE": "DT 類別",
    "REDICLESET": "Redicle Set",
    "DTHOST": "DT Host",
    "MAINDEPARTMENT": "責任部門",
    "OQCFORMNO": "出貨檢驗單編號",
    "MOSTATEREPORTDEF": "工單現況資訊查詢定義",
    "PERIODINSPECTION": "定時檢",
    "QCATTRULEMAP": "計數品管項目與判別法規則對應",
    "CHECKOUTRELEASENAME": "生產完成說明",
    "LABEL NO": "標籤編號",
    "LOT CURRENT STATUS IS OUTSOURCING": "生產批目前狀態為外包",
    "LOT CHANGE COMP_LED": "生產批換片_LED",
    "RERUN_SCRAP": "重新上線_不良品",
    "LOTQTYADJUST": "生產批數量調整(生產批)",
    "FROMFIELDNAME": "From Field Name",
    "ARE YOU SURE TO OPEN LOT EXECUTION AND END INV COUNTING": "是否確認盤點開帳",
    "SHOWWIZARDWELCOME": "不要再顯示此歡迎畫面",
    "RPTLOTRESOURCE_SHARE": "生產批資源檢視(分攤)",
    "DISPOSITION18D": "D5處置對策",
    "PACKAGE TYPE": "封裝型別",
    "DEDUCTIONITEM2": "減項",
    "TABLE NAME": "資料表名稱",
    "INVMATERIALADJUST": "開立庫存調整單",
    "RERUNSCRAPQTY": "重新上線損壞數",
    "MENUDEL": "刪除",
    "MENUADD": "新增",
    "EQUIPMENTRECIPESHOW": "設備參數",
    "MEMOLDR": "批號 / 缺點 / 結果",
    "MEMOQTY": "",
    "FRMINVSTOCKERBASIS": "在製貨架基本資料",
    "QUERYDATADEF": "SPC 資料定義",
    "CHECKBYEQUIPMENT": "依設備檢查",
    "NETFLOWREMAINCLEARDEF": "網狀製程殘餘量清除作業定義",
    "AREABASIS": "區域基本資料",
    "PMI_QCITEMGROUP": "計量品管項目群組_減項",
    "REFERENCELOT": "參考批",
    "PLZCHECKOUT": "請先執行下工",
    "OPSUMMARY_TRENDCHART": "作業站時段產出_趨勢圖",
    "REJECTACTION": "拒收回應",
    "AREACLASS": "區域分類",
    "FULLPATH": "路徑",
    "FULLFLAG": "滿箱",
    "OPGROUPBASIS": "作業站群組資料",
    "IF GROUPNUMBER < 4": "當組數小於四組時",
    "LOT HOTLOT AND PRIPORITY CHANGE": "生產批緊急狀態/優先權調整",
    "SPC_ERFBASIS": "SPC 異常單查詢",
    "RODETAILDEFINE": "訂單明細定義",
    "OSRETURN_ERP": "ERP外包回貨",
    "GETXML": "取得XML",
    "INVENTORY_SCRAPSTOCKIN_E10ICD": "不良品入庫至E10ICD ERP",
    "PRD DEFECT LOG": "Product Defect Log",
    "GETFACTORVALUE": "取得要因値",
    "PRIVOPTIONNO": "否",
    "SET SUCCESSFULLY": "設定成功",
    "MEASURE": "量測",
    "IMPORT QCITEM VARIABLES": "計量品管項目匯入",
    "OPGROUPORDER": "作業站群組次序",
    "LOTSTATE_HOLDDEF": "異常生產批查詢定義",
    "SEMIINBASIS": "半成品入庫單主檔資料",
    "PRODUCTPROCESSOP": "產品流程作業站",
    "CAN T SAME AS": "不能相同於",
    "OPSTATE_PRODUCTNO": "作業站現況_產品",
    "LOTOPHISTORY": "作業站歷程",
    "GROUP2": "群組",
    "GROUP3": "群組",
    "GROUP1": "群組",
    "SCR INVENTORY": "報廢倉庫房資料",
    "PDLINESTATUS": "生產線狀態",
    "CALCULATESCRIPT": "計算式定義",
    "BARNUMBER": "顯示條數",
    "SELECTEQUIPMENTNO": "選擇設備編號",
    "PRODUCT OP COPY": "產品作業站批次複製",
    "EXPORTREPORT1": "匯出報表",
    "INVENTORY CONFIG": "基本設定",
    "FUNCTION7": "功能鍵 7",
    "FUNCTION6": "功能鍵 6",
    "FUNCTION5": "功能鍵 5",
    "FUNCTION4": "功能鍵 4",
    "FUNCTION3": "功能鍵 3",
    "FUNCTION2": "功能鍵 2",
    "FUNCTION1": "功能鍵 1",
    "FUNCTION8": "功能鍵 8",
    "WAFER SAMPLE RULE": "Wafer 抽樣規則",
    "RANGEVALUE": "Range Value",
    "OUTPUTSTRING1": "輸出字串",
    "PSCRAPCL": "P-Chart Scrap 管制中心",
    "PSCRAPLS": "P-Chart Scrap 規格下限",
    "PSCRAPUS": "P-Chart Scrap 規格上限",
    "WAITTIMESHOW": "等待時機",
    "DEDUCTIONTIMES": "減項連續N次Pass轉複檢",
    "T_20002210": "T_20002210",
    "MESSAGE": "訊息",
    "MESINFO": "MES資訊",
    "TRANSSHORTRUN": "是否為Shortrun 轉換",
    "RPTLOTRESOURCE_SHAREDEF": "生產批資源檢視(分攤)定義",
    "FILE SOURCE": "檔案來源",
    "MERGEQC": "併批檢驗",
    "SETPRIVILEGE": "權限設定",
    "CONTACTORNAME": "聯絡人名稱",
    "QCATTRULEBASIS_TAPE": "捲帶計數法則設定",
    "PRDQCRULEBASIS": "產品抽樣頻率規則",
    "CANNOTEXECUTEPARTIALINV": "無法執行部分入庫",
    "DESCRIPTION": "說明",
    "FROM PRODUCTTYPE": "From Product Type",
    "WORKTIME TEMPLATE": "工作日曆樣板",
    "ONLIE_CONTROL": "線上管控",
    "ACCUMULATEQTY_SHOW": "累計數量",
    "ENGPROPERTYDEF": "工程資料屬性定義",
    "SELFMADE_OUTSOURCE": "自製+外包",
    "TOTALINPUTQTY": "輸入數量合計",
    "ABPOSITION": "AB 位置",
    "LOT MERGE_COMP": "併批處理_元件",
    "BEFORE": "前",
    "APPLYACC": "上機",
    "QUICS IMPORT": "Quics 匯入",
    "SLENGVERSION": "SL Eng Version",
    "EQUIPMENTRUNTIME": "設備作業時間",
    "CHECKOFFICEVERSION": "請安裝Office Word 2007含以上版本",
    "T_10101300": "T_10101300",
    "BANKNO": "銀行帳號",
    "BARNUM": "長條數量",
    "INSPECTION MECHINE": "檢測機台",
    "ONTIMEFINISHMOTOTAL": "準時完工單數",
    "FORMATSETTING": "格式設定",
    "COSTMODULE": "成本分析",
    "HAS NOT BEEN COMPLETED": "未完成",
    "FROMINVDATE": "從庫房確認日期",
    "MATERIALSTATEMONONODENOTFOUNDORVALUEISEMPTY": "找不到用料清單工單編號節點或工單編號為空",
    "ONLY CAN SELECT OP NODE": "只能選取作業站節點",
    "SCRAPSTOCKIN_T100": "不良品入庫至T100 ERP",
    "EQUIPMENTSTATELOGBYSTATEDEF": "設備歷史資料查詢_狀態定義",
    "ANSLINECHART_SUBQUERYBYFACTOR": "依要因分析",
    "BONDNO": "否",
    "BOXQTY": "小箱裝箱數",
    "SEARCHSTART": "擷取碼數(起)",
    "PACKINGRULEMAP NOT DEFINED": "產品包裝規則對應未設定",
    "BORROW": "借用",
    "PACK_LOTQTY": "可裝數量",
    "REASONSUBTYPEBASISDEF": "品質原因子類別資料定義",
    "VISIBLEFIELD1": "可檢視欄位",
    "VISIBLEFIELD2": "可檢視欄位",
    "LED PROGRAM BASIS": "LED BIN表設定",
    "BINDEF": "Bin 定義編輯",
    "BINQTY": "Bin 數量",
    "BIASNO": "偏差分析單編號",
    "EQPSTATEINSPECTION": "改機檢",
    "GRIDSTYLE": "格線型式",
    "LOADPORTNO": "否",
    "AUTOFLAG": "自動機台",
    "BR_CL_MERGE_GENDEF": "併批處理_載具定義",
    "LINE USER SET": "生產線人員排班",
    "PACKING LABEL PRINT": "標籤補列印",
    "COUNTDATE": "關帳日期",
    "LOT LOG REPORT": "生產批歷程明細查詢",
    "SYSTEMFORMEXPORT": "滙出表單說明",
    "COUNTUNIT": "計算單位",
    "MIXINVMO": "工單",
    "FACTORSOURCE": "要因來源",
    "BUSINESSRULEBASISDEF": "企業邏輯設定定義",
    "TESTPLAN_NAME": "TestPlan_Name",
    "ISSUE CONFIG": "簽核設定",
    "WIPINVQTY": "線邊倉數量",
    "ANDGROUP": "And 群組",
    "AUTOMORELEASE": "是否自動執行工單下線?",
    "RECIPETEMPLATE": "Recipe 樣版設定",
    "DATEFEQ": "每隔N天需要換一次密碼",
    "DATACONFIRM": "檢測值確認",
    "DATAQTY": "資料數量",
    "DATALOG": "修改紀錄",
    "DATABIT": "資料位元",
    "USERTYPESHOW": "使用者類別",
    "BRNAME": "企業邏輯名稱",
    "FACTORSERIAL": "因子序號",
    "BROWSE": "瀏覽",
    "BROKER": "報關行",
    "STATECOLOR": "狀態顏色",
    "SCRAPSTOCKINORNOT": "是否將損壞入庫",
    "THICKFROM": "厚度-起",
    "ISSUE CHANGE": "更改簽核狀態",
    "OPRECIPE": "作業參數",
    "QC WEEKLY OUTPUT": "品管產量週報查詢",
    "BR_LC_SPLIT_GENDEF": "分批處理_元件定義",
    "QC REPORT": "品質相關報表",
    "DAYVIEW": "日排程表",
    "BYRATE": "依比率抽樣",
    "BYAREA": "區域",
    "CANCELCLOSE": "取消結案",
    "GRIDCOLOR": "格線顏色",
    "CONSTRICTED": "受限制的",
    "SAMPLEFUNCTION": "抽樣程式",
    "IMPORT_QCITEM_VARIABLES": "計量品管項目匯入",
    "MINNUM": "最小值",
    "MINIR1": "最小逆向電流",
    "MINVZ1": "最小逆向電壓",
    "MINVF3": "最小正向電流",
    "MINVF1": "最小電壓",
    "MINUTE": "分",
    "ALERTCOUNT": "預警使用次數",
    "ALERTBASIS": "警示資料設定",
    "CHECK IN BATCH": "批次進站",
    "BR_L_COBATCH_MULTIUSER": "企業邏輯 - 多人加工批次生產登錄介面(Check Out)",
    "ERPPDLINENO": "ERP線別/廠商",
    "SEMI PRODUCT IN LOG": "半成品入庫單記錄",
    "PART_NO": "料號",
    "VALUETYPESHOW": "有效性檢查",
    "8D MAINTAIN": "8D 矯正單維護作業",
    "ALERTFIELD": "警示欄位",
    "EQUIPMENTLOTSTATEHOLD_SINGLE": "生產批立即異常設定",
    "QCOBJECT": "檢驗標的",
    "PACKLEVEL": "包裝階層",
    "GERPRODUCT": "...",
    "MAINSN": "預防主次序",
    "MAOPNO": "作業站編號",
    "MANUAL": "手動",
    "QCITEMATTORDERGROUP": "計數品管項目_群組",
    "MAXVF1": "最大電壓",
    "MAXVF3": "最大正向電流",
    "MAXVZ1": "最大逆向電壓",
    "MAXIR1": "最大逆向電流",
    "MAXNUM": "最大值",
    "MASTER": "主資料",
    "MASKID": "光罩ID",
    "FROMBASELOTNO": "From Base Lot No",
    "DUMMY INV": "虛擬倉",
    "CLEANSTATE": "剩餘清洗次數",
    "PMFREQUENCYDATA": "設備保養頻率資料",
    "MOFLAG": "MO Flag",
    "MODULE": "模組",
    "MONDAY": "星期一",
    "MOVEUP": "上移",
    "MOVING": "稼動",
    "MOINFO": "工單資訊",
    "MOSEMI": "工單",
    "MOTYPE": "工單類別",
    "WAITINFORMATION": "等待單資訊",
    "INVTRANSACTIONSTATEDEF": "交易狀況定義",
    "MEMOLR": "批號 / 結果",
    "MATERIAL RETURN": "開立退料單",
    "MEDIAN": "組中點",
    "EQPVENDORDEF": "設備供應商基本資料定義",
    "FUNCTION": "函式",
    "METHOD": "方法",
    "MOMATERIALLISTERROR": "工單用料清單錯誤",
    "FIGURESWORDS": "至少含N個阿拉伯數字",
    "QCATTRULEBASIS_TAP": "",
    "MECHINEPICTURE": "Mechine Picture",
    "TCPIP DT": "DT 主選單",
    "PACKINGNO": "包裝編號",
    "PRDSTAGESTEPSET": "產品製造層別使用設備指定",
    "PADLEFT": "自動補零",
    "UNSELECTSTATE2": "未選取狀態",
    "REASONSUBTYPEDEF": "原因子類別定義",
    "SHIPPINGINSTRUCTIONNO": "出貨指示單編號",
    "INVENTORY OF AREA": "區域資料設定",
    "PACKSET": "裝箱設定",
    "PACKQTY": "包裝數量",
    "PACKING": "包裝",
    "PACKBOX": "第1層包裝",
    "SYSMODULEBASIS": "系統模組",
    "PACKCLOSE": "強制封箱",
    "YEARBASIS": "年度定義",
    "WODETAIL": "工單明細",
    "ERFPARETO_QUERY": "異常單柏拉圖分析",
    "QUERYCHARTCAPABILITY": "全製程能力報表",
    "QCITEM_VDELETE": "刪除計量型品管項目量測記錄",
    "REVISEDATE": "修改日期",
    "PANELID": "Panel 編號",
    "BR_LC_CI_MOCVD": "企業邏輯 - MOCVD登入介面(Check In)",
    "ANALYSIS": "分析",
    "WSERP_E10ICDSETTING": "找不到E10ICD相關整合設定資訊, 請先至 系統管理->參數->ERP整合設定 中設定相關資料",
    "YEARMONTH": "年月",
    "LOT SPLIT_CARRIER": "分批處理_載具",
    "UNSELECTGROUP": "未選的群組",
    "THE TO OPNO CANT BE BEFORE FROM OPNO": "結束作業站不能在開始作業站之前",
    "FROMVALUE": "起始值",
    "RECEIVENO": "Receive No",
    "RECEIVEQI": "檢驗單品管項目清單",
    "STATE NAME": "狀態名稱",
    "QCITEMDELETEFORVARIABLES": "刪除計量型品管項目量測記錄",
    "SEPARATESIGN": "2D條碼分隔符號",
    "MTLWIP": "物料線邊倉",
    "VATTESTVALUEISNULL": "沒有計量值",
    "LOTBASIS_CE": "生產批主檔_網狀製程",
    "LOTBASISDEF": "生產批開立定義",
    "RAWINVENTORY": "原物料倉",
    "GRIDSIZEHEIGHT": "格高",
    "CLOCKINED": "已登入",
    "SPECIFIED MATERIAL": "指定用料",
    "YEAR_WEEK": "Year Week",
    "FROM_OPNO": "起始作業站編號",
    "PRD CONFIG": "產品設定",
    "ROLISTERROR": "訂單清單錯誤",
    "ONLINE REASON TOP TEN": "十大不良原因查詢",
    "QC_ITEM_INFO_GET": "品管項目資訊取得",
    "SYS PARAMETER": "系統參數",
    "ALREADY FINISHED": "已結束",
    "TRANSACTIONSTATE": "交易狀況",
    "ADDMATERIAL2MOSUCCESS": "工單發料成功",
    "DATABASECHECK": "資料庫檢查",
    "JOB TYPE": "工作形式設定",
    "MATERIALINGENERATEQCFORM": "開立進料單時自動產生檢驗單",
    "FTPROGRAMBASISDEF": "FT測試程式定義",
    "VIEWATTACHFILE": "檢視附件",
    "PIADTHICKNESS": "PIAD Thickness",
    "EQP MTTR SUMMARY BYMONTH": "設備MTTR統計表_以月份匯總",
    "EQPSTATESTATISTICS": "設備狀態期間統計查詢",
    "FINALGROUP": "最後處理群組",
    "PACKDETAIL": "包裝內容",
    "REMAINQTY": "剩餘數量",
    "REMAINBIN": "剩餘Bin分佈",
    "INVMATERIALADJUSTDETAILDATA": "庫存調整單明細資料",
    "FROMDATE1": "開始日期",
    "BELONGDATESTART": "歸屬日(起)",
    "AUTOSPLITPROCESSDRAW": "流程",
    "REQUIREDWORKORDER": "特殊需求保養工單",
    "MO DELETE": "工單刪除",
    "SOURCESHOW": "原始檔",
    "SOURCETYPE": "資料來源",
    "EQUIPMENTSTATEQUERYBYTYPE": "設備狀態監控_設備類別",
    "IMMEDIATEHANDLING": "即時處置",
    "SRCLOCATORNO": "來源儲位",
    "QUEUEPASSWORD": "訊息佇列登入密碼",
    "GROUP NODE CANT BE GROUPED": "群組節點不能群組化",
    "FROMLOTNO": "來源批號",
    "CREATEDEPARTMENTNO": "建立部門編號",
    "INVRAWWAFERBASISDEF": "基板物料定義",
    "CONT_ATTRIB_ADJUSTDEF": "生產批作業站製程特性值異動定義",
    "34STYLE": "34進位",
    "ANSATTRAWDATA": "計數品管檢測資料",
    "MAINPROCESSVERSION": "主流程版本",
    "BR_LB_COEQC_FT": "企業邏輯-電信(EQC)抽樣規則登出_等級",
    "QUEUETIME": "等待時間",
    "INCOMINGNO": "收料編號",
    "INCOMINGQC": "進料檢驗單",
    "ISSUETABLE": "簽核Table",
    "SPCMODULE": "品質管理",
    "GWDTSTATE": "GW DT 狀態",
    "ERRORHISTORY": "不良原因明細",
    "ISSUEQUERY": "簽核查詢",
    "2DBARCODEFORMERROR": "2D條碼格式不正確",
    "FAIL INV": "不良品庫",
    "WAITBASISDEF": "等待單資料定義",
    "EQUIPMENTACCSTATE": "設備配件現況查詢",
    "FAILQTY2": "不良數(修)",
    "FAILQTY1": "不良數(原)",
    "NOT SELECT ANY MATERIAL LOTNO": "未選擇任何一個物料批號",
    "QCFACTORMAINTAIN": "要因資料維護",
    "NOTALLOWEMPTYVALUE": "不允許空值",
    "IMMEDIATEHOLDSETDEF": "立即異常設定定義",
    "CONTROL CHART ANALYSIS BY FACTOR": "管制圖分析_以要因查詢",
    "PMWORELEASEDEF": "保養工單下線定義",
    "PLANINSPTIME": "預計檢驗時間",
    "PRODUCT BASIS": "產品基本資料",
    "PLANINSPDATE": "應檢驗日期",
    "SETATTRIB": "特性設定",
    "ISSUESTATE": "簽核狀態",
    "OUTINVENTORYNO": "Out Inventory No",
    "NOT ALLOW TO SELECT TIME LIMIT CONTROL SETTING WHEN STARTOP AND ENDOP ARE SAME": "開始與結束作業站相同時, 不允許設定中間站點觸發異常",
    "ANSPARETO": "柏拉圖",
    "PARAMETER1": "參數",
    "SYSMODULEBASISDEF": "系統模組定義",
    "EASONLEVEL": "Eason Level",
    "WIPOSRETURNCOMPONENT": "外包回貨_元件",
    "ERF UNRELEASED": "未結異常單",
    "MONTHREPORTNO": "月報表編碼",
    "CANNOT": "無法",
    "CANCEL": "取消",
    "CAPOFF": "關閉能力",
    "CARTON": "大箱",
    "PRODUCTPROPERTYDEF": "產品屬性定義",
    "COMP MATERIAL BY MATERIAL": "物料用於元件查詢",
    "PRODUCT YIELD": "產品良率查詢",
    "ISSUEGROUP": "簽核群組資料",
    "PACKINGQTY": "包裝數",
    "PACKINGSET": "包裝設定",
    "PACKINGLOT": "包裝批",
    "SHIPBASIS": "出貨基本資料",
    "NOTALLOWREVERSEALONE": "不允許單筆還原",
    "LOTATTRIB": "生產批特性",
    "COMCOL": "元件收集",
    "COMMIT": "還原鎖定",
    "COLONA": ":",
    "COLONB": ":",
    "COLOR1": "顏色",
    "COLOR2": "顏色",
    "COLUMN": "欄位",
    "CASSETTENO": "Cassette 編號",
    "SHIPADDR2": "出貨地址",
    "THE DATE BLOCK IS ALREADY EXIST RECORDS": "此時段已存在記錄",
    "CODENO": "缺點編號",
    "SRCSTOCKERNO": "貨架編號",
    "COPYTO": "複製到",
    "COPY_P": "複製(&P)",
    "CORPID": "微信企業ID（Corpid）",
    "CLOSE3": "關閉",
    "CLOSE2": "關閉",
    "CLOSE1": "關閉",
    "CLOSE4": "關閉",
    "CLOSER": "結案人",
    "CLOSED": "已結案",
    "STD_PCSQTY": "包裝數量",
    "OPERATOREXCEPTIONTIME": "使用者除外工時",
    "CLEAR1": "清除",
    "CLEAR2": "清除",
    "CLEAR3": "清除",
    "CLRMSG": "清除訊息",
    "PASSWORDRULE": "密碼原則",
    "MATERIALVENDORDEF": "物料供應商基本資料定義",
    "WIPOSUNRETURNBASIS": "外包回貨主檔",
    "CODE ISNT ENOUGH": "代碼不夠",
    "TRACKDEPARTMENT": "追蹤部門",
    "NO MES PARAMETER VALUE CAN RETURN": "無MES參數值可回傳",
    "BRERFCREATE_BATCH": "批次立即異常開立",
    "CHOICE": "選取",
    "CHOOSE": "選取",
    "GWADDRESS": "GW 位址",
    "CHECK1": "檢查",
    "COMPUTERMODELLING": "電腦模擬",
    "CHANGE": "變更",
    "CHART1": "Trend Chart",
    "CHART3": "R Chart",
    "CHART2": "X-bar Chart",
    "QTYVALUEEMPTY": "數量值為空",
    "CUSTOM": "自訂",
    "CURQTY": "目前數量",
    "FGDSTOCKIN_T100_CANCEL": "取消入庫 T100 ERP",
    "QCRULEOPTION": "法則選項",
    "CAN ONLY USE": "只能使用",
    "CATCHTABLEXML": "快取資料表XML",
    "CUNSUM": "耗品資訊",
    "CREATE": "建立",
    "DATAINTERVAL": "資料區間",
    "PLANACTION": "行動對策",
    "PDLINE MSG001": "有暫停的生產批不允許異動",
    "XLSSOURCEFILECONTROL": "Excel匯出樣板",
    "BILLBOARD OPSTATE_PRDTYPE": "作業站現況看板_產品類別",
    "QCDAILYOUTPUTDEF": "品管產量日報查詢定義",
    "MATERIALADJUSTBASIS": "庫存調整單主檔",
    "ULTRAGRIDISSUECONTROL": "UltraGrid簽核變更",
    "WIPOSCONFIRM": "外包單確認",
    "CST_ID": "Cassette ID",
    "IMMEDIATEHANDLINGSETTINGBASIS": "即時處置主檔",
    "MAX_BOXNOFN": "小箱n/n最大值",
    "GROUP BASIS": "群組基本資料",
    "SHOWTRENDCHART": "顯示 Trend Chart",
    "MINSPLITQTY": "最小分批數",
    "BE SURE TO SAVE": "確定儲存",
    "OPQCITEM": "作業站品管項目",
    "LOTCHOICEEQP": "生產批選用生產設備",
    "SECURITYLEVEL": "安全等級",
    "ENABLE FILTER": "Enable Filter",
    "DISAPPROVE": "解除",
    "ACTUALFINISHDATE": "實際完工日",
    "CARRIERMERGE_COMP": "載具併批元件配置",
    "PRODUCTVERSIONCHANGEDEF": "產品版本變更定義",
    "CLEAR LAYOUT": "清除設計",
    "RPT_ON_CYCLETIME": "產品生產週期查詢",
    "SAMPLEPLANCHANGETO": "轉換至抽樣計劃",
    "REPORTGROUPBASISDEF": "報表群組基本資料定義",
    "BR_L_SPLITBYRULE_GEN": "分批處理 (by Rule)",
    "HINETHIAIR": "Hinet企業簡訊",
    "AVAILABLEMATERIALQTYINPUT": "輸入用料數量",
    "DISPATCHUSER": "派工人員",
    "EVERY HOUR": "每小時",
    "DISPATCHDATE": "派工日期",
    "EMP_RESVALUE": "工時(分鐘)",
    "DISPUSERNO": "處置使用者編號",
    "DEFAULTOP": "預設作業站",
    "STATEEXCLUDED": "State Excluded",
    "WIP DISPATCH": "手動派工",
    "DATAHISTORY": "資料修改記錄清單",
    "PROGRAMBASISDATA": "測試程式",
    "ADDOUTLINE": "新增框線",
    "SHIPPING1": "出貨",
    "DEFAULT": "預設",
    "DEFECT1": "缺點",
    "EMAIL ADDRESS": "電子郵件地址",
    "WEEKVIEW": "週排程表",
    "DESCRIPTION_CHT": "繁中說明",
    "DESCRIPTION_CHS": "簡中說明",
    "DENOMINATOR": "分母",
    "YIELDPERCENT": "良率%",
    "HOLDITEMBASIS": "異常原因基本資料",
    "MANUALCLOSE": "結案處理",
    "PRODUCTPACKINGRULEMAP": "產品包裝規則對應",
    "DECIMAL": "10進位",
    "DISCRETEFUNCTIONALAREA": "離散型功能區區域",
    "NODATA": "無資料",
    "NODENO": "節點編號",
    "NODEID": "節點識別碼(Id)",
    "NOTSEL": "不選取",
    "NOTSET": "不設定",
    "NOTUSE": "不使用",
    "FUTUREHOLDRELEASE": "預先異常解除",
    "NORDER": "N Order",
    "NORMAL": "一般",
    "ISSUE LIST": "簽核明細列表",
    "ISSUE FORM": "簽核控制表單",
    "INSTRUMENTNO": "儀器編號",
    "EQPDAILYREPORT": "設備稼動查詢",
    "INSPECTION MACHINE": "檢測機台",
    "CURSORMODE": "游標模式",
    "MESSAGE QUEUE BASIS": "訊息佇列基本資料",
    "DISABLEBINBYQTY0": "數量為0的Bin :",
    "OPFORQCBASIS_SPK": "作業站主檔",
    "MOBASISDEF_PCB": "工單主檔_PCB",
    "DELETE4": "刪除",
    "DELETE7": "刪除",
    "DELETE1": "刪除(&D)",
    "DELETE2": "刪除(&D)",
    "DELETE3": "刪除(&D)",
    "CATCH TEST2": "快取_查詢測試",
    "CATCH TEST3": "快取_查詢測試",
    "WORKINGHOUR": "工作時數",
    "STDUNITEQPTIME": "標準單位機時",
    "NEXTOP": "下一作業站",
    "WIPMODULE": "在製品管理",
    "NEWBOX": "產生箱",
    "WAITDESCRIPTION": "等待說明",
    "NDFROM": "Nd From",
    "NDDATE": "Nd Date",
    "RPT_ON_LOTSTATEDEF": "生產現況查詢定義",
    "ASSIGNVERSION": "指定版本",
    "PROCESSPREVIEW": "流程預覽",
    "PLAN FINISH TIME": "預計完工查詢",
    "DELETE_MO": "工單刪除",
    "DELETEALL": "全部刪除",
    "ENDFINISH": "到完成日期",
    "QCITEM_A RULE DATA TAPE": "捲帶計數法則設定",
    "DETAIL1": "明細",
    "MATERIALGROUPDEF": "物料群組資料定義",
    "INVWIPINVENTORY": "在製品庫庫房資料",
    "WP_CARRIERMANAGEMENT": "載具管理_元件",
    "COUNTRY CODE": "國碼",
    "EMAILADDRESS": "電子郵件地址",
    "COMRULENO": "元件判別法則",
    "LOTVALIDCHECK": "批號有效性檢查",
    "SCRAPQTY": "損壞數",
    "SCRAPACC": "報廢",
    "PROPERTY DATA WIDTH OR LENGTH IS NOT DEFINED": "屬性資料寬度或長度未定義",
    "LOTSPLIT_COMPONENTSELECT": "分批-元件分配",
    "FGD INVENTORY": "成品庫庫房資料",
    "OUTERINCOMINGQC": "託外進貨檢驗單",
    "SPC REPORT": "SPC報表",
    "OPHISTORY": "作業站歷程",
    "YOU CANNOT DELETE DATA": "無法刪除資料",
    "PACK_PCSQTY": "已包裝數量",
    "EQUIPMENTDATAIMPORT": "設備資料匯入",
    "SHOWBARTCHART": "顯示直條圖",
    "QCATTRULEBASISDEF": "計數判別法則基本資料定義",
    "KEYVALUE": "值",
    "NUMBER": "編號",
    "FT PROGRAM BASIS": "FT測試程式",
    "DATABASENAME": "資料庫名稱",
    "DATABASETYPE": "資料庫類別",
    "RETEST LOTNO": "重檢批號",
    "HORIZONTALPOSITION": "水平位置",
    "SELECTEDEQPNODISPATCH": "選擇的設備未派工",
    "SYSTEMMANAGEMENT": "系統管理",
    "OPFORQCBASISDEF": "品管作業站定義",
    "USER IS ALREADY LOGGED ON": "使用者已登入",
    "TO PRODUCTTYPE": "To Producttype",
    "FUTUREHOLDSET": "預先異常設定",
    "IMPORT": "匯入",
    "INHAND": "進行中",
    "INLINE": "In Line",
    "INSERT": "插入",
    "INPUT3": "輸入",
    "INPUT2": "輸入",
    "INPUT1": "輸入",
    "INVCOUNTSTATEADJUSTDEF": "盤點調帳定義",
    "USERERRORLOGDEF": "錯誤紀錄定義",
    "NO DEFINITION": "未定義",
    "ESTIMATEDPMDATE": "預估保養日期",
    "OP RULE BASIS": "作業站法則設定",
    "MEASURE DATA COLLECTION": "SPC資料收集",
    "SPLITLOTQTY": "子批批量",
    "FROM RONO": "From Ro No",
    "AREA BASIS": "區域基本資料",
    "FROM OPNO": "From OP No",
    "CHECKBOX": "核取方塊",
    "CHECKOUT": "出站",
    "IORITY": "優先權",
    "DOWNLOADTEMPLATE": "下載樣版",
    "CONDITIONCOLUMN": "條件欄位",
    "OPERATORCOUNT": "操作人員數",
    "SECTIONDETAIL": "位置明細",
    "CONDOPERATOR": "運算子",
    "NO RECORD": "查無資料",
    "ERPQCITEMNAME": "ERP 檢驗名稱",
    "PMSOPNO": "標準作業程序編號",
    "CONCESSION": "特採",
    "MODULETYPE": "模組類別",
    "RESPONSEMSGQUEUE": "訊息佇列回應伺服器",
    "MODULENAME": "模組名稱",
    "OPERATORLOGIN": "使用者登入站別/區域",
    "MODULEDATA": "模組資料",
    "ERPINVENTORYNO": "ERP 庫房編號",
    "RECIPIENT": "訊息收件者",
    "RECIPEDEF": "設備參數定義",
    "RECIPESQL": "Recipe SQL",
    "PLEASE SELECT AT LEAST ONE LINK": "請至少選擇一條連線",
    "BYPRODUCT_LOTNO": "依不同產品編碼",
    "CREATE LOT_MOTRANS": "生產批開立_工單轉移",
    "KEYFIELD": "欄位",
    "PRODUCTPROPERTY": "產品屬性",
    "EQUIPMENTLOTLOGREPORT": "設備生產歷程",
    "REASONSUBTYPENAME": "原因子類別名稱",
    "SAMPLINGPLANWILLCHGTO": "抽樣計劃將轉換成",
    "SPC AUTO REPORT": "自動寄送報表",
    "HIDDENCOLUMN": "隱藏欄位",
    "ONLINE RODETAIL": "補料分析查詢",
    "PMJOBNO": "工作編號",
    "INVENTORY_SCRTURN": "不良品轉庫",
    "REPEATEDUSE": "重複使用",
    "CAN T INCLUDE": "不能包含",
    "PMORDER": "預防保養工單",
    "OPERATORSTATE": "登錄現況",
    "MONOEXIST": "工單已存在",
    "CURUSERNO": "目前使用者編號",
    "WAITLOTMERGE_BIN": "等待併批_等級",
    "EQUIPMENT REASON BASIS": "設備狀態變更原因資料",
    "PMCYCLE": "保養週期",
    "YIELDCONTAINDEFECT": "良率計算包含缺點數",
    "L3_QTY": "第三層包裝數",
    "CHECKSUMTYPE": "校驗類別",
    "EQPTOOLBASISDEF": "工具基本資料定義",
    "L1_QTY": "第一層包裝數",
    "PM INQUIRY": "預防保養查詢",
    "ITEMNO": "項次",
    "L4_QTY": "第四層包裝數",
    "INV STOCKER STATE QQUERY": "在製貨架查詢作業",
    "OPSCRIPT": "條件式作業參數-描述語言",
    "SHOWERFPOINT": "顯示異常單標記",
    "ELEMENTNO": "特性編號",
    "L2_QTY": "第二層包裝數",
    "QCCHARTSAMPLANPARAMETERDEF": "品管管制圖與抽樣計劃參數對應設定",
    "MATERIALCOMPOSITION": "Material Composition",
    "IR1MAX": "最大逆向電流",
    "IR1MIN": "最小逆向電流",
    "REPAIRNO": "維修編號",
    "L5_QTY": "第五層包裝數",
    "IPQCNO": "檢驗單號",
    "LIKE11": "%",
    "LIKE10": "%",
    "LINEID": "Line ID",
    "LIMITS": "界線",
    "SOPFILENAME": "指導書名稱",
    "CAN NOT BE CHANGED HERE": "不能被改變",
    "SOPFILEPATH": "標準作業程序檔案路徑",
    "FROMEQUIPMENTNO": "來源設備編號",
    "CREATE LOT_BATCH": "生產批開立_批次",
    "USEMATERIAL": "Use Material",
    "L6_QTY": "第六層包裝數",
    "IS NOT": "不是",
    "SHOWINONEPAGE": "顯示單一頁面",
    "ERPTRANSACTIONLOGDEF": "ERP交易紀錄定義",
    "REPORTTYPESHOW": "報表類型",
    "CATCH LOT STATE": "快取_生產現況查詢",
    "ATTRIBVALUENEW": "異動後特性值",
    "ATTRIBVALUEORG": "異動前特性值",
    "COMSEARCH": "搜尋",
    "EARLYMOTOTAL": "提前開工單數",
    "PMJOBNAME": "工作名稱",
    "SAMPLINGPLAN_WAFERDEF": "抽樣計劃_元件定義",
    "CURUNITNO": "目前單位編號",
    "OCAPDATA": "OCAP 基本資料定義",
    "PACKINGLIST_BIN": "包裝清單_等級",
    "COSTCENTER": "成本中心",
    "LABELY": "Y",
    "LABELX": "X",
    "LAYOUT": "佈置圖",
    "FUTUREHOLDDATA": "預先異常資料",
    "PLANWAFERSTARTDATE": "Plan Wafer Start Date",
    "MAINPROCESSNO": "主流程",
    "PRODUCTEQPCONSTRAINT": "禁用設備",
    "PROJECTDEPARTMENT": "專案部門",
    "EQUIPMENTREASONBASISDEF": "設備原因基本資料定義",
    "LOGOUT": "登出",
    "LOCKER": "Locker",
    "LOCQTY": "儲位數量",
    "LOOKIN": "搜尋範圍",
    "BASICPARAMETER": "基礎參數",
    "RPTLOTHISTORYDEF": "生產歷程及現況查詢定義",
    "LOT NO": "批號",
    "LOTQTY": "批量",
    "LOT_ID": "Lot ID",
    "LOTNO1": "批號",
    "LOTLOG": "生產歷程",
    "LOP5_2": "<=",
    "LOP2_2": ">=",
    "LOP1TO": "亮度-迄",
    "AFTERDELETINGDATAWILLNOTBEABLETORESTORE": "資料刪除後將不可還原",
    "NONTRANSFERABLE": "不可轉換",
    "BREAKDOWN_REPAIRQUERYDEF": "故障維修登錄查詢定義",
    "HAVINGLOTINWIPINVENTORY": "有生產批於產線",
    "ERFLCMERGERULE": "併批規則: 相同站點、相同BR、Lot Hold、ERF狀態:最後處置",
    "LENGTH": "長度",
    "OPSTATUS": "OP Status",
    "REVERSEID": "還原編號",
    "AFTEREVENTQC": "允許補點檢",
    "REPORTID": "報表編號",
    "REPORTNO": "月報表編碼",
    "MATCHCASE": "區分大小寫",
    "CONTROLNO": "控制項編號",
    "SAMPLINGPLAN_WAFER": "抽樣計劃_元件",
    "OUTSOURING": "外包",
    "ASSIGNBINORDER": "指定Bin順序",
    "REJLOTQTY": "拒收批數",
    "ACTIVESTATUS": "封存啟用狀態",
    "INVWIPINVENTORYDEF": "在製品庫庫房資料定義",
    "PRODUCTVERSION1": "產品版本",
    "QC_ITEM_DETAIL": "品管項目清單",
    "FHOLDRELEASE": "下線",
    "TOBRNO CAN NOT BE EQUAL TO FROMBRNO WHEN STARTOP AND ENDOP ARE SAME": "開始與結束作業站相同時, 開始與結束企業邏輯不可相同",
    "PLEASE CHECK ENDCODE": "請檢查結束代碼",
    "QCLISTSERIAL": "點檢序號",
    "MATERIALBASISDATA": "物料主檔資料",
    "CALENDARBASIS": "行事曆設定",
    "UNSELECTPS": "未選的區段",
    "UNSELECTOP": "未選的作業站",
    "ISSTOCKIN2ERPYES": "是",
    "EQUIPMENTBASISDEF": "設備基本資料定義",
    "MATERIALBASIS_SPK": "物料主檔",
    "START NODE ONLY CAN DEFINE A PASS LINK": "開START Node只能有一個PASS LINK",
    "DATA IS NOT COMPLETE, MO MATERIAL STATE DATA NOT FOUND": "資料不完整，無工單領料現況資料",
    "CUSTOMERCONTACTOR": "客戶連絡人資料",
    "RUN CARD BASIS": "流程卡設定",
    "COMP MATERIAL BY COMPONENT": "元件使用物料查詢",
    "MO PROPERTY": "工單屬性",
    "DEFROSTMAXHOUR": "最大回溫時效",
    "HOLD AND WAIT": "異常 & 等待",
    "SPCONLINECONTROL_CONTINUE": "SPC 線上檢驗連續輸入",
    "INBOUND": "入庫計價",
    "ISSUEGROUPNO": "簽核群組編號",
    "CONTACTOR": "聯絡人",
    "REPORTSCRIPT": "描述語言",
    "INDEXNO": "索引編號",
    "LOTDETAIL": "生產批明細",
    "EVERYMONTH": "每月的",
    "THIS ACCESSORY": "此配件",
    "LOTBASISDEF_ASSEMBLY": "生產批主檔定義_Assembly",
    "CANNOT CLEAR ALL THE PACKING DETAIL": "不允許移空包裝明細",
    "SERIALLENGTH": "長度",
    "CONTENTNO": "生產批／載具編號",
    "CONTENTID": "批號",
    "SPCIDSHOW": "管制圖",
    "INKTYPE": "INK Type",
    "INVMATERIALWIPRETURNDETAILDEF": "退料單(WIP)明細定義",
    "SPECIALVALUE": "特殊值",
    "CURPERIOD": "目前加工時數",
    "REPORT OF OUTPUT YIELD": "產出與良率報表",
    "QCMODULE": "品質資料",
    "INLINEG": "Inline",
    "INLINEA": "Inline",
    "INLINEV": "Inline",
    "RECORDDATE": "發生日期",
    "EXPAND ALL": "展開所有",
    "ININVNO": "In Inventory No",
    "CHECK FAIL": "檢查失敗",
    "ONLINE": "線上",
    "CHECKOUTTIME": "結束加工時間",
    "ONTIME": "準時",
    "DOWNLOAD": "下載",
    "INITIAL": "初始化",
    "DEPARTMENTDATA": "部門資料",
    "MODULESTAGENO": "製造層別",
    "DEPARTMENTNAME": "部門名稱",
    "INSPQTY": "檢查數量",
    "DTHOSTBASIS_TCPIP": "DT Host 主檔",
    "OK_QTY": "合格數量",
    "INSERT2": "插入",
    "BUT KEY IN TEXT IS EMPTY": "但輸入文字是空白",
    "INPUTNO": "輸入編號",
    "APSDISPATCHSTATEDEF": "APS派工查詢定義",
    "INPNODE": "輸入節點定義",
    "MOSTARTPRODUCTION": "開線作業",
    "OBJECT": "物件",
    "OPTCUSTOMERLOTNOSHOW": "客戶批號選項",
    "FORMATFILENAME": "格式檔名",
    "OOSQTY": "Org OS Qty",
    "CONSUMENO": "耗品名稱",
    "SAMPLE SIZE IS NOT ALLOW TO BE OVER 1 POINT": "品管項目公式計算項目對應的抽樣點數不能超過1點",
    "UNITNO OF PRODUCT": "產品的單位",
    "LOTSPLITPROCESSDRAW": "流程變更",
    "VAR_ONLINECONTROLWAFERADJUST": "Wafer調整",
    "QCITEM_G_PMI": "計量品管項目群組_減項",
    "QCITEM_GROUP": "品管項目_群組",
    "INTEGER": "取整數",
    "DATA NOT FOUND": "找不到資料",
    "REQORDER": "特殊需求保養工單",
    "INITIALACC": "初始化",
    "INVDATE": "入庫時間",
    "OCAPNO": "OCAP 編號",
    "INVADDR": "發票地址",
    "INVALID": "無效",
    "INVINNO": "入庫單號",
    "QCMETHOD": "抽樣方式",
    "QCCATEGORYNAME": "品管類別名稱",
    "QCINSPECTION": "設備品檢管理設定",
    "QCCATEGORY_PRD": "產品品管類別",
    "QCCATEGORY_MTL": "物料品管類別",
    "SYSTEMTABLEEXPORT": "匯出資料庫表格說明",
    "ROUNITNO": "接單單位編號",
    "INVLOCATORBASISDEF": "儲位基本資料定義",
    "DEFECTQTY": "缺點數",
    "COMPONENT": "元件",
    "DEFECTLOG": "Defect Log",
    "HAVECOMPONENTSHOW": "是否有元件",
    "FONTSIZE": "字型大小",
    "PCCOUNT": "pc數",
    "RULEPHASESHOW": "法則階段",
    "PAGE CONTENT QUERY": "Page查詢",
    "ACCESSORY REPAIR": "配件壽命維護",
    "ANSPIECHART": "圓餅圖",
    "DEPARTMENT CONFIG": "部門",
    "TURNINVENTORY": "轉庫",
    "CURSTAGE1": "目前階段",
    "CURSTATUS": "目前狀態",
    "PRODUCTOPDEAFULT": "產品作業站預設",
    "FROMQCITEM": "複製來源品管項目",
    "DBTOOLS": "資料庫工具",
    "ORANGE": "橘",
    "ORGQTY": "原數量",
    "ORGLOTNO1": "原始批號",
    "MERGEOPTION": "是否併回",
    "CONTROLDTCONECT": "限制上線人數",
    "PACKINGLEVEL MUST BE CONTINUOUS": "勾選的包裝階層必須是連續性的",
    "OVERED": "已超過",
    "OSWAIT": "待出貨",
    "MUST BE MORE THAN": "必須大於",
    "OSDATA": "外包單資料",
    "OPRULE": "作業站法則",
    "OPVIEW": "作業站檢視",
    "OPTYPE": "作業站類別資料",
    "DO YOU WANT TO COVER": "是否覆寫",
    "OPNAME": "作業站名稱",
    "OPAREA": "作業站資源",
    "SQLFIELDNAME": "資料欄位名稱",
    "OUTXML": "傳出XML",
    "OUTQTY": "Out Qty",
    "OUTPUT": "輸出",
    "ERPPASSWORD": "ERP密碼",
    "DETAILCONDFIELD": "明細條件欄位",
    "EMAILBODY": "E-Mail 內容",
    "THE SEARCH ITEM": "查詢項目",
    "DTBASIS_TCPIP": "DT 主檔",
    "INVPREORDER": "開立預訂單",
    "ROBASISDEF": "訂單基本資料定義",
    "QCVARIABLE": "計量",
    "ERPWOWORKREPORTDATA": "MEStoERP生產報工抛轉資料(1:平攤",
    "DETAILCONDITION": "明細條件",
    "QCLISTNO": "點檢表編號",
    "ONLY ALLOWED": "只允許",
    "NOT HAVE OP PRIVILEGE": "無作業站權限",
    "DTHOSTCLIENT": "DT Host 模擬器",
    "VERIFIERNAME": "驗證人姓名",
    "INVENTORY BASIS": "庫房基本資料",
    "SPCATTLIMITDEF": "計數管制內容定義",
    "FREQUENCYNO": "頻率編號",
    "INVMATERIALADJUSTBASISDATA": "庫存調整單主檔資料",
    "ISSUEMASTERNO": "簽核主編號",
    "EXECUTESHOW": "執行",
    "PACK/INV": "包裝 && 庫房",
    "MASTERFIELD": "主資料欄位",
    "EXECUTEDESC": "執行狀況描述",
    "EXECUTEDATE": "執行日期",
    "EXECUTEFLAG": "執行旗標",
    "OVER 24 HOURS": "超過24小時",
    "PMYEARNO": "設備保養年編號",
    "PACKTYPE": "包裝類型",
    "OPPROPERTYDATA": "作業站屬性資料",
    "PACKLIST": "包裝清單",
    "EXECUTE LOT": "生產批執行",
    "UNCONFIRM": "未確認",
    "PRODUCTOUTPUT_MONTHDEF": "產品入庫月報明細查詢定義",
    "WIPRETURNNO": "線上退料單號",
    "CLEARLAYOUT": "清除設計",
    "DIAGRAM": "",
    "PLEASE SELECT AT LEAST TWO NODES": "請選擇至少兩個節點",
    "DISPATCH BASIS": "設備派工處理",
    "DIFFQTY": "調整數量",
    "EXCEPTTIME": "除外時間",
    "ERRORCOLLECT_RAWSCRAP": "損壞不良原因定義",
    "ABNORMALREPAIRKEYIN": "不良現象維修輸入",
    "GRRFORMNO": "單號",
    "HAVEATTACHFILE": "是否有附件",
    "ENGINEERGROUP": "工程群組",
    "FIXEDQUANTITYDEF_EQP": "設備定量保養設定",
    "CONSUMECOST": "耗用成本",
    "WP_8DANSFISHBONE": "8D 原因分析魚骨圖",
    "PLUSCHAR5": "+",
    "PLUSCHAR4": "+",
    "PLUSCHAR3": "+",
    "PLUSCHAR2": "+",
    "PLUSCHAR1": "+",
    "BREAKDOWN START TIME": "故障開始時間",
    "MATERIALTYPEDEF": "物料類別資料定義",
    "CAPABILITYTYPE": "製程能力類別",
    "BR_CL_SPLIT_GEN": "分批處理_載具",
    "PM TYPE": "預防保養維護方式設定",
    "PM ITEM": "預防保養項目資料",
    "PM MONO": "預防保養工單編號",
    "CAPABILITYCOPY": "設備可用能力複製",
    "ROPROPERTY": "訂單屬性",
    "LOTNO_INV": "生產批編號",
    "CLOSEUSERNAME": "結案人姓名",
    "APS DISPATCH STATE": "APS派工查詢",
    "PRD_SYSFLOW": "產品管理",
    "WAFER LABEL PRINT": "晶圓片之圓片標籤列印",
    "EQUIPMENT RECIPE": "設備參數",
    "JUMPOP": "跳站",
    "DISPLAY": "顯示",
    "FILESIZELIMIT": "檔案大小限制(MB)",
    "DISNODE": "顯示節點定義",
    "QTYADJUST": "數量調整",
    "PRODUCTPACKINGLABELRULEDEF": "標籤規則設定",
    "EMPLOYEEINSPECTION": "換人檢",
    "SEMI INVENTORY": "半成品庫庫房資料",
    "APSDISPATCHSTATE": "APS派工查詢",
    "QCITEM_A RULE MAP": "計數品管項目判別法則對應",
    "OPPARAMETERSETUP": "作業站參數設定",
    "CHANGETO": "轉換至",
    "SAVE LAYOUT": "儲存繪製",
    "PACKCONFIG": "包裝前作業",
    "WIP PARTIAL": "部份報工",
    "BY105EAQL": "依105E AQL",
    "RESCLASS": "資源大分類",
    "INTERNALMEMBER": "內部成員",
    "EVENT  LOG": "事件記錄",
    "EQUIPMENTSTATELOGDEF": "設備狀態記錄查詢定義",
    "TRANSFER TYPE": "轉換方式",
    "UPDATE": "更新",
    "UPBOX6": "工單資料",
    "UPBOX1": "Group Box",
    "UPBOX3": "上",
    "UPBOX2": "Group Box",
    "PLEASE SELECT A DISPOSITION": "請選擇一個異常處置",
    "UPLOAD": "上傳",
    "LOT RESOURCE SHARE": "生產批資源檢視(分攤)",
    "SHOW USER AGENT": "代理人查詢",
    "QCITEMATTRULEMAP": "計數品管項目與判別法則對應",
    "OSITEMNAME": "外包項目名稱",
    "USERNO": "使用者編號",
    "USERID": "使用者ID",
    "USEQTY": "使用數量",
    "USED​​": "",
    "RULELOGQUERY": "生產批執行法則查詢",
    "SUMMARY8D": "D8總結",
    "LOTOPERATORCLOCKIN": "使用者批次上工作業",
    "INLINE QC": "Inline QC",
    "USEDVERSION": "目前版次",
    "NOT IN SPECIFIED LOCATOR": "不在指定儲位上",
    "PACKCARTON": "第2層包裝",
    "MODULEVERSION": "模組版次",
    "UPPERLIMIT1": "~",
    "MOMATERIALRETURNERP_TPDEF": "工單退料至TipTop ERP定義",
    "PHASENAME": "階段名稱",
    "PHASEDATA": "階段資料",
    "RESOURCE": "資源",
    "UNREASONABLE INFORMATION, MO MATERIAL LIST DO NOT CONTAIN WAFER MATERIALS ,MAPPING FUNCTIONS ARE DISABLE": "設定不合理，工單用料中不包含芯片料，無法疊圖",
    "REVISERDATE": "修改日期",
    "DETAILEDIT": "明細修改(&E)",
    "DETAILCOPY": "明細複製(&C)",
    "MOMATERIALRETURNERP_WFDEF": "工單退料至WorkFlow ERP定義",
    "OE_SYSFLOW": "工單管理",
    "WODETAIL1": "工單明細",
    "QAUSERNO": "驗證人",
    "NOT ALLOWED TO EXECUTE": "不允許執行",
    "THAILAND": "泰文",
    "INVPROPERTY": "庫房屬性",
    "RESVALUE": "實際用量",
    "UDEFECTCL": "U-Chart Defect 管制中心",
    "UDEFECTLS": "U-Chart Defect 規格下限",
    "UDEFECTUS": "U-Chart Defect 規格上限",
    "ACC MONITOR": "配件狀態監控",
    "LOT OPERATOR CLOCKIN": "使用者批次上工作業",
    "LABELPRINTER": "標籤印表機",
    "SAMPLEPLANCHANGE": "抽樣轉換",
    "REMEMBERPW": "記住密碼",
    "TONODENAME OF TONODEID": "ToNodeName of ToNodeId",
    "CHARTYES": "是",
    "GETFROMINVSTATENAME": "領用 狀態名稱",
    "STATUS IS RUNNING": "狀態正在執行",
    "SAMPLEBIN": "抽樣Bin分佈",
    "SAMPLENUM": "抽樣數",
    "SAMPLEQTY": "抽樣數",
    "WORKMONTH": "Work Month",
    "ACCESSORYLIFEDATA": "配件壽命資料",
    "PICUTRE": "圖檔",
    "PICK UP": "撿貨確認",
    "ACCESSORYNO1": "配件編號",
    "UNSSEL": "<",
    "UNPACK": "拆解",
    "EQUIPMENTSTATELOGTOPTEN": "前十項設備狀態記錄",
    "UNUSED": "不使用",
    "UNITID": "單位編號",
    "UNITNO": "單位編號",
    "EQPPARAMETERBASIS": "設備參數設定",
    "PRODUCTTYPEPRODUCTNO": "產品類別產品編號",
    "REASON DISTRIBUTION": "原因分布",
    "WORKINGNO": "Working No",
    "BRERF8DCREATE": "企業邏輯 - 異常單開立介面",
    "XML FORMAT ERROR": "XML格式錯誤",
    "CURRENT BR IS NOT PACKING": "目前不在包裝作業",
    "產品作業站資源檢視": "產品作業站資源檢視",
    "WECHATID": "企業微信ID",
    "LOADAVAILABLELOT": "可生產Lot",
    "LOGOUTSTARTDATE": "登出結束日期",
    "HOSTNO": "HOST 編號",
    "HOSTID": "HOST ID",
    "HH24MM": "(HH24:mm)",
    "HOTLOT": "緊急批",
    "ACCESSORYCATEGORYSTATEBASIS": "配件分類狀態設定",
    "CHANGDISPGROUPNO": "變更異常處置群組",
    "HEIGHT": "高度",
    "SN_C_DECIMALTYPE": "大箱編碼進位方式",
    "INCLUDELOG": "顯示歷程",
    "SCRIPT REPORT": "描述語言報表查詢",
    "SERIALMAXADJUST": "序號調整",
    "PDLINE USER SET": "生產線別使用者設定",
    "WORKPRICE": "工價",
    "AQLREJECTNUM": "根據AQL拒收數",
    "SCENARIO": "劇本(&S)",
    "WEDNESDAY": "星期三",
    "PRODUCTBASISDEF": "產品基本資料定義",
    "DISPOSITION": "處置",
    "RETURNNO": "退貨單號",
    "CANNOT SET MIN AND MAX": "不能設定最大與最小值",
    "LOGOUTDATE": "登出時間",
    "WINFORMVERSION1": "WinForm 版本",
    "LOGOUTTIME": "登出時間",
    "QCRULEBASISDEFINE": "品管法則主檔定義",
    "DEFECTCODEBASIS": "缺點設定",
    "SERIALRULETYPE": "序號類別",
    "CHECKLOTNO": "是否檢查批號",
    "INSPDOCLINK": "檢驗報告書路徑",
    "BATCH_ECNNO": "批次ECN編號",
    "OP CONTROL RULE": "作業站管制規則",
    "SMTPSERVER": "SMTP 伺服器",
    "CALCULATEQTY": "自動計算GoodQty、ScrapQty及DefectQty數量",
    "ERFPARETO_RESULT": "異常單柏拉圖分析",
    "INVENTORY": "庫房",
    "FROM REFRO": "從參考訂單",
    "DATASTARTTIME": "資料彙整開始時間",
    "WIPCANCEL": "作廢",
    "EQP STATE STATISTICS_EMS": "設備狀態期間統計查詢",
    "SUBMATERIALNO": "Subcontractor Material No",
    "EVERYNUM": "每幾片",
    "EVERYDAY": "每日的",
    "COUNTOPUNITQTY": "計時基本數量",
    "TOTAL OUTPUT": "Total Output",
    "OPTLOTNO": "批號選項",
    "PLEASE SELECT A DIFFERENT ACCESSORY STATE": "請選擇不同的配件狀態",
    "REASON QTY": "不良數量",
    "EDIT LOTBASIS": "編輯生產批主檔",
    "SYSTEMFUNCTION": "系統功能",
    "TYPEMESSAGE": "顯示訊息",
    "APPROVED FAIL": "核准失敗",
    "ALERTDEFAULTEVENT": "警示預設事件",
    "WIP INVENTORY NO": "在製品庫房編號",
    "GETSELREASONNO": "取得描述",
    "INVENTORY_SEMITURN": "半成品轉庫",
    "REASONNAME": "原因名稱",
    "DUTYDEPARTMENT": "責任部門",
    "REASONTYPE": "原因類別",
    "QCITEMNO": "品管項目編號",
    "QCITEMOP": "品管項目所屬作業站",
    "QCITEM_V": "計量品管項目",
    "QCITEM_G": "計量品管項目_群組",
    "QCITEM_A": "計數品管項目",
    "RESULTTABLE": "結果資料表",
    "FROMOPENDTIME": "From OP End Time",
    "INVLOCATORDATA": "儲位主檔",
    "PHASENO": "階段編號",
    "MUSTSELECTPRODUCTTOOPERATEFIRST": "必須要先選擇要作業的產品資訊",
    "ISSUEMOMATERIAL": "工單發料",
    "MAX_PALLETNOFN": "棧板n/n最大值",
    "AREABASISDATA": "區域主檔資料",
    "LAST_PALLETNO": "最近一個裝箱之棧板編號",
    "DETERMINED": "已判定",
    "OBJECTTEXT": "Object Text",
    "OBJECTTYPE": "Object Type",
    "OBJECTFILE": "物件對應表",
    "TRACKERNAME": "追蹤者姓名",
    "USERSECURITY": "使用者基本资料",
    "INVMATERIALOUTDETAIL": "領料單明細",
    "QCIMPORT": "品管項目匯入",
    "MUST SELECT QUERY CONDITION": "必須選擇查詢條件",
    "LOT COMP SPLIT": "元件分片處理",
    "CUSTOMERSHIPDECLARATIONDEF": "客戶出貨報關定義",
    "QCATTRULEBASIS_TAPEDEF": "捲帶計數法則設定定義",
    "EMSEQPMAPPING": "設備能力設定",
    "KOREAN": "韓文",
    "EQUIPMENT STATUS": "設備狀態",
    "SHOW AVAILD LOT": "Show Availd Lot",
    "FROMRULENO": "From Rule No",
    "CONTINUOUSLY ARRANGED": "連續排列",
    "FROMLOTSERIAL": "From Lot Serial",
    "GAPBETWEENBARS": "Bar間距",
    "USERSECURITYDEF": "使用者基本资料定義",
    "IDLESTATENAME": "閒置狀態說明",
    "EQPMAINTENANCEPLAN": "保養計劃變更資料",
    "BR_L_CO_PKGSORTER_NOBIN": "PKG_Sorter Check Out BR (No BIN)",
    "NUMPRODUCTNO": "保留/截去 碼",
    "CHKHOSTSETTING": "檢查主Host是否離線設定",
    "KEYIN1": "直接輸入",
    "KEYIN3": "直接輸入",
    "QCITEM RULE MAP": "計量品管項目管制法則對應",
    "SUBSTITUTIONTYPEDEF": "備品類別資料定義",
    "EVENTLOG": "事件記錄",
    "VERSIONTYPE": "版本",
    "ONLY CAN DEFINE": "只可以定義",
    "EARLYFINISHMORATE": "提前完工率",
    "SERIALDETAIL_PS": "包裝編號明細",
    "INVCUSTNO": "發票開立對象",
    "SENDEMAILTEST": "測試寄送電子郵件",
    "IS EQUAL TO": "等於",
    "QUERYDATA": "SPC 資料維護",
    "ERP TRANSACTION LOG": "ERP交易記錄",
    "MONOFROMERP": "工單資料來自ERP",
    "SCRIPTDISPLAY": "顯示描述語言",
    "ANSPARETOLAST4WEEK": "柏拉圖(前四週)",
    "AVAILABLESTATE": "可用狀態",
    "BACKTOERFDISPOSITION": "退回異常單處理",
    "KVALUE": "K值",
    "UNSELECTEDRULE": "未選的法則",
    "ENERGY VALUE": "曝光能量",
    "COM_QUANTITYCONVERSION": "數量轉換設定",
    "MATERIALTYPEDATA": "物料類別資料",
    "MATERIALTYPENAME": "料件類別名稱",
    "PRODUCTION PLANNING": "生產計畫",
    "QARESULT": "驗證結果",
    "BR_LC_CIBATCH_FT": "BR_LC_CIBATCH_FT",
    "ADDRELATION1": "新增關連",
    "DOEST NOT DEFINE PASS LINK": "找不到PASS LINK",
    "REVERSE1": "保留",
    "REVERSE3": "保留",
    "REVERSE2": "保留",
    "INSPMACHINE PARAMETER": "檢測儀器基本資料",
    "EXPANDALL": "展開全部",
    "BR_L_CO_CELL": "企業邏輯 - 生產登錄介面(Cell Check Out)",
    "SN_C_FRONT": "大箱編碼前置字元",
    "FROMUNUSED": "不使用",
    "BUT APPEND TEXT IS EMPTY": "但附加文字是空白",
    "CHECKFLAG": "選取",
    "CHECKOPNO": "檢查站別",
    "CHECKITEM": "檢查項目",
    "CHECKRANK": "等級檢查",
    "PACKBOXQTY": "小箱裝箱數",
    "RETURNMAINPROCESS": "回主流程",
    "STARTING INSPECTION ABNORMAL RELEASE": "始業點檢異常解除",
    "ADDRELATION": "新增關連",
    "OPENING DEVICE FAILURE IN ADDRESS 15": "位址15開啟設備失敗",
    "NOTRETURNORGPROCESS": "不回原流程",
    "LOT PROPERTY": "生產批屬性",
    "EQUIPMENT REPAIR BASIS": "維修原因基本資料",
    "TCPIP DTBASIS": "DT 主檔",
    "QCPRODUCTSPEC": "產品規格設定",
    "ELEMENTTYPESHOW": "特性類別",
    "SCATTER DIAGRAM": "散佈圖分析",
    "LOTNO IN STOCK": "生產批未下貨架",
    "MAJORLOT": "Major Lot",
    "EXCEPREASON": "除外原因",
    "MOIQCCOMPONENT": "元件進貨檢驗",
    "PROGRAM_TYPE": "",
    "EQP MAINTENANCE": "設備維修",
    "WAFERRECEIVING": "晶片收料",
    "LOT SPLIT_COMP": "分批處理_元件",
    "USEACCESSORY": "Use Accessory",
    "MAINTAINVENDOR": "維護廠商",
    "FUNCTION FORMAT": "Function Format",
    "PLEASE CHECK ATTRIB SOURCE": "請檢查特性來源",
    "TOTALEXCEPTIONTIME": "總除外時數",
    "VZ1MAX": "最大逆向電壓",
    "VZ1MIN": "最小逆向電壓",
    "LOTBASISDEF_BATCH_WAFER": "",
    "FACTORY BASIS": "工廠基本資料",
    "RULEMETHODSHOW": "法則方法",
    "REFLOTINFO": "參考批資訊",
    "INV TRANSACTION": "庫存交易",
    "OPIMPORT": "作業站匯入",
    "ANSATTCHART": "計數型管制圖",
    "PROGRAMBASIS": "測試程式",
    "BROKER BASIS": "報關行基本資料",
    "PLEASE SELECT DATA": "請選擇資料",
    "VIOLATIVE": "Violative",
    "PUTINPLACE": "投料點",
    "ARCHIVEUSERNO": "封存使用者",
    "QCREPAIRBASIS": "維修基本資料",
    "FROMOPRECIPE": "來自工程碼Recipe",
    "QCITEM PARAMETER": "品管項目參數",
    "LOT ALREADY IN INV": "生產批已入庫",
    "SMDMODULE": "區域資料",
    "PRODUCTLABELRULEDEF": "產品標籤規則設定",
    "PLEASE KEYIN PART": "請輸入部份",
    "VALUEL": "參考界限",
    "VALUEV": "參考值",
    "VALUES": "標準差的倍數",
    "FUNCTION VALUE": "Function Value",
    "EQP STATE CHANGE": "改變設備狀態",
    "CONT_MATERIAL_BYMATERIAL": "物料用於生產批查詢",
    "QCCHARTBASISDEF": "管制圖內容定義",
    "FINAL GROUP": "最後處理群組",
    "BR_LC_MERGE_GEN": "併批處理_元件",
    "ACCSCRAPREASONBASISDEF": "配件不良原因基本資料",
    "MONORELEASED": "工單已下線",
    "VF3MIN": "最小正向電流",
    "VF3MAX": "最大正向電流",
    "VF1MIN": "最小電壓",
    "VF1MAX": "最大電壓",
    "VERIFY": "驗證對策",
    "SEARCHINVENTORYNO": "尋找庫房編號",
    "MTLQCITEM": "物料規格設定",
    "VENDOR": "供應商",
    "TOTALERRORQTY": "不良數量合計",
    "EQUIPMENLISTEDBELOWSTILLHADALTEREVENTPLEASECHECKIT": "以下設備尚有待補檢的設備點檢單，請盡速完成以利生產作業進行。",
    "ALARMOFFTIME": "警告聲間隔長度",
    "RETICLESETLAYER": "配件組層別",
    "QUERY INTERVAL": "查詢區間",
    "VISUAL": "Visual",
    "FUTURE WAIT RELEASE": "預先等待解除",
    "ACC MONITOR BY EQP": "配件狀態監控_設備",
    "DELRELEASEDLOT": "刪除已下線生產批",
    "CURRENT BR IS NOT THE LAST BR IN OP, CANNOT CHANGE PRODUCT": "此企業邏輯非本作業站的最後一個企業邏輯, 不允許變更產品",
    "EXECUTEDELETE": "執行刪除",
    "MSA FREQUENCY": "MSA檢測數據",
    "SUBSTITUTIONNO": "備品編號",
    "DATAARCHIVERELATION": "數據封存關連",
    "TBLSMDPDLINEPOSITIONBASIS": "崗位資料檔",
    "SPECLINETYPE": "規格線類別",
    "SAMPLETYPESHOW": "抽樣類型",
    "PLANFINISHDATETO": "預計完成時間至",
    "PALLETNO": "棧板編號",
    "SIMPLIFYCHINESE": "簡體中文",
    "INVENTORY_WIPDEF": "在製品庫帳務維護定義",
    "EQPENGINEERGROUPBASIS": "設備工程群組資料",
    "BREAKDOWNENDTIME": "故障結束日期",
    "QUENCE": "數量",
    "QUERY1": "查詢",
    "CREATE PACKING LIST": "開立包裝清單",
    "WIPSTAGEDAILYREPORTDEF": "客戶產品作業站現況查詢定義",
    "SUBSTITUTIONGROUPDEATIL": "備品群組明細",
    "TIMECYCLESTART": "週期開始時間",
    "SUBSTITUTIONGROUPDETAIL": "備品群組詳細資料",
    "DOUBTFUL": "呆帳",
    "QRSNO1": "8D單號",
    "QRSNO2": "8D單號",
    "FIRST PROCESS": "第一個流程",
    "ASSIGNMAXBINNUM": "指定最大Bin個數",
    "MAINMENU": "主選單",
    "SUBCONTRACTORCONTDEF": "外包商聯絡人基本資料定義",
    "MAINDATA": "主要資料",
    "PM QUERY": "查詢",
    "SPECIALBASISMAINTAIN": "特殊主檔維護",
    "MAINTAIN": "保養",
    "WHEN LOT HAVE COMPONENT,NOT ALLOW TO EXECUTE SELECTALL/UNSELECTALL": "當有元件時不允許透過「全選 / 全不選」進行變更",
    "MONTH_WEEK": "Month Week",
    "ROITEMNOCANNOTCHANGE": "訂單項次不可變更",
    "SHIFT OF THE USER": "使用者名稱/班別",
    "EQPINPUTQTY": "投入數",
    "MAILGROUPNO": "主要收件群組",
    "PLEASE DEFINE PROCESSES OR CHECK YOUR PS PRIVILEGE": "請定義流程或檢查產品區段設定權限",
    "SUBSTITUTION TYPE BASIS": "備品類別資料",
    "PHASEBASISDEF": "階段設定定義",
    "ARCHPASSWORD": "封存資料庫密碼",
    "TCPIP DTHOSTCLIENT": "DT Host 模擬器",
    "JUDGEORDER": "比對順序",
    "PDEFECTLCL": "P-Chart Defect 管制下限",
    "PDEFECTUCL": "P-Chart Defect 管制上限",
    "RETURNLOTCOMPBASIS": "主資料",
    "EX_MTLBASIS1": "EX_MTLBASIS1",
    "MATERIALRETURNBASIS": "退料單主檔",
    "QAMEMO": "驗證註記",
    "SWRDESCRIPTION1": "特殊作業指示說明",
    "EPITAXYEQP": "磊晶設備",
    "MATERIALRETURNNOWIP": "退料單(WIP)編號",
    "PRODUCTIONDATA": "生產資料",
    "PMBRAEKDOWN QUERY": "故障原因統計",
    "PRODUCTIONTIME": "生產時間",
    "ALERTCONDITION": "警示條件",
    "DATATYPE IS DIFFERENT WITH": "資料類別不同於",
    "PM BASIS": "預防保養",
    "BR_CL_CO_FABFOUP": "企業邏輯 - 以載具過帳生產登錄介面(Foup Check Out)",
    "QCSPEC": "品管規格",
    "QCRULE": "品管法則主檔",
    "QCTYPE": "點檢方式",
    "QCDATA": "品管資料",
    "QCDONE": "檢驗是否完成",
    "QCLIST": "點檢表",
    "QCITEM": "品管項目",
    "LOTBASISDEF_BATCH_REWORK": "",
    "CANNOT EXECUTE UNPACKING": "不可執行移出包裝功能",
    "EQP_MTTRSUMMARY": "設備MTTR統計表",
    "PRODUCTRUNTIME": "產品標準作業時間",
    "DATAITEMS": "Data Items",
    "EDITING FAIL": "編輯錯誤",
    "SUMMARYDEPARTMENT": "總結部門",
    "SUBSTITUTEMATERIALLEVEL": "替代料等級",
    "BASELOTNO1": "主批號",
    "ERPMOLINENO": "ERP工單生產線別",
    "DEFAULTVALUE": "預設值",
    "GETDBSERVERTIME": "取得DB Server目前時間",
    "FACTORNO IS NOT IN INLINE FACTORNO.PLEASE CHECK IT.": "品管項目收集要因與抽樣計畫轉換要因不符，請確認",
    "GETPLANPARAMETER": "取得計劃參數",
    "TUNING": "調整",
    "TURNTO": "移轉至",
    "TURNON": "開啟",
    "BUSINESS": "企業",
    "OCAPDISPOSITIONADJUST": "OCAP異常單處置調整",
    "MERGE LOT IS ONLY ONE ROW": "MUST GREATER THAN ONE",
    "CONTAINS SPECIAL SYMBOLS": "包含特殊符號",
    "LOTRELEASEOPTION": "解除選項",
    "QCITEM_VARIABLES": "計量",
    "INVALID_1": "失效",
    "INITIALSTATENAME": "初始化狀態說明",
    "ERPSETTINGDEF": "ERP整合設定定義",
    "WARNING": "提示",
    "WATCHID": "手環ID",
    "AREALOGINLOGOUT": "登入/登出",
    "NOT ALLOW TO RELEASE": "不允許下線",
    "INVENTORY_FGDSTOCKIN_TPDEF": "入庫至TipTop ERP定義",
    "TESTCOUNTS": "有N點",
    "TESTCOUNTV": "有N點",
    "TESTCOUNTL": "有N點",
    "TESTCOUNTO": "有N點",
    "TARGET": "目標",
    "TABLES": "資料表",
    "MEASURETIMES": "量測次數",
    "GREENLIGHTCANOUTPUT": "綠燈，平行站點無殘餘量",
    "SETUPTYPE": "設定類型",
    "SQLSERIALNO": "SQL Serial No",
    "STOCKER STATE": "在製貨架查詢作業",
    "TESTER": "Tester",
    "IS STRING": "NOT ALLOW TO SET MIN OR MAX VALUE",
    "TECHID": "Tech ID",
    "INVENTORY_FGDSTOCKIN_WFDEF": "入庫至WorkFlow ERP定義",
    "TYPECODE": "Type Code",
    "BREAKDOWNBASISDEF": "故障原因基本資料定義",
    "PRODUCTYIELDANDWIPSTATEDEF": "產品作業站現況及良率報表定義",
    "DILANGUAGE": "目的地語系",
    "GET SAMPLING PARAMETER FAIL": "取得計劃參數失敗",
    "ECNSTEP1DESCRIPTION": "歡迎使用工程變更精靈",
    "GETPRODUCTNO": "...",
    "TIPTOP": "TIPTOP",
    "DECLARATION": "報關",
    "PLEASE CLICK OR SELECT MOTYPE OF EXPAND PROCESS": "請點擊或選取展開流程的工單類別",
    "RECEIVEQTY": "Receive Qty",
    "EMERGENCY": "急料否",
    "DEFROSTMINHOUR": "最小回溫時效",
    "ATT_ONLINECONTROLMEASUREDATA": "計數線上資料收集",
    "QCITEMSETTING": "計量型品管項目設定",
    "SERIALTYPENO": "序號類別編號",
    "SWRDETAIL": "特殊需求",
    "REASONTYPESHOW": "原因類別",
    "MERGE NOT SUPPORT BATCH WAIT DISPOSITION": "併批不支援批次等待處置",
    "BATCHSERIAL": "批次執行序號",
    "WAFERID": "Wafer ID",
    "WAFERNO": "晶圓片號",
    "PROPERTYSEQUENCE": "屬性次序",
    "WAITLOT": "等待生產批查詢",
    "WAITING": "等待",
    "WAITGRR": "待量測",
    "WAITQC1": "待點檢",
    "INVENTORY_SCRAPSTOCKIN_TP": "不良品入庫至TipTop ERP",
    "FINALPRODUCTNO": "Final Product No",
    "FIXED TIMES PM BASIS": "設備定次定時保養設定",
    "ACC STATE QUERY": "配件狀態查詢",
    "MEASURECOUNT": "量測物數量",
    "SAMPLEPIECENUM": "抽樣片數",
    "TOTIME": "結束時間",
    "STOCKER BASIS": "在製貨架基本資料",
    "TONODE": "To Node",
    "TOOPNO": "結束作業站",
    "MATERIALLOT_WIP": "物料批",
    "TOOLNO": "工具編號",
    "SEMIPRODUCTNO": "半成品產品編號",
    "TOBRNO": "結束企業邏輯編號",
    "TODAYS": "結束日",
    "INVSCRINBASIS": "不良品入庫單主檔",
    "EQPCOMPCYCLEBASIS": "設備圈別資料",
    "WIP_RETURN": "已在客託倉或退貨倉",
    "ALERTNAME": "警示名稱",
    "CANCELFALG": "作廢",
    "ALERTDESC": "警示說明",
    "CANCELLING": "取消中",
    "COMPONENTCOLLECTSHOW": "輸入元件資訊",
    "ALERTTYPE": "警示類別",
    "ALERTTIME": "警示時間",
    "LOTDISPORDER": "順序",
    "TESTVALUE": "Test Value",
    "REALTIMEDB": "即時資料庫",
    "SPCQCFORM": "檢驗單",
    "NOT ALLOWED TO EDIT": "不允許編輯",
    "MUST BE": "必須是",
    "OPERATORLOGINEXCEPTIONDETAILR": "使用者除外工時明細",
    "INSPMACHINEPARAMETER": "檢測儀器基本資料",
    "PMPLANNO": "保養計畫",
    "FORMULASCRIPT": "計算式描述語言",
    "EQUIPMENT CONTROL": "設備管制設定",
    "SYS FUNCTION": "系統功能",
    "SERIAL NUMBER GENERATION": "序號生成列印",
    "PRODUCTVERSION": "產品版本",
    "WIPOSDEF": "外包單開立定義",
    "RECORDQTY": "異常發生數量",
    "ENDPERIOD": "結束期間",
    "PASSWORD MUST BE LETTERS OF THE ALPHABET (A-Z OR A-Z) OR NUMBERS(0-9)": "密碼須為字母a-z or A-Z 或數字0-9",
    "MASTERDATA": "主資料",
    "SUBSCRIBETYPE": "訂閱方式",
    "BASEMATERIALNO": "基本料號",
    "QC ITEM VDELETE": "",
    "INVENTORY_SEMIDEF": "半成品庫帳務維護定義",
    "MTL DEFROST OP": "Material Defrost Op",
    "HOLDITEMDATAIMPORT": "異常原因資料匯入",
    "BEFORE TODAY": "今天之前",
    "ISNOTSELECTED": "未選取",
    "THE REFERENCE LOT IS OUTSOURCING BUT UNCONFIRM": "生產批為未進行確認的外包生產批",
    "REJECTNUM": "拒收數",
    "REJECTSQL": "Reject SQL",
    "REJECTQTY": "拒收數",
    "OP MATERIAL STATUS": "作業站存料現況查詢",
    "TESTCOUNT": "Test Count",
    "ROMQUERY": "RO M Query",
    "NODEINFORMATION": "節點資訊",
    "WAITNO": "Wait 編號",
    "WAITQC": "待驗",
    "NEXT_PCSQTY": "下一個PCS之歸屬小箱內的第幾台",
    "MATERIAL NOT ENOUGH": "用料不足",
    "INACTIVEDATE": "失效日期",
    "NEWCARRIERNO": "新載具編號",
    "EXITOPTIONS": "離開選項",
    "PRDDESCRIPTION": "產品說明",
    "ECNSTEP5TITLE": "影響之生產批",
    "PRODUCTPROCESSNONOTEXIST": "產品流程不存在",
    "RPT_TIMESTEPOUTPUTQUERY": "時段歷史紀錄",
    "EQPRECIPEBASISDEF": "設備參數資料定義",
    "FROMPENDING": "簽核中",
    "PRODUCTPACKINGSET": "產品包裝設定",
    "WETYPE": "WE Type",
    "EQUIPMENTSTATECHANGE": "改變設備狀態",
    "TCPIP DTHOSTBASIS": "DT Host 主檔",
    "WEBURL": "網址",
    "PRDOPDEFAULTITEM": "產品作業站參數預設項目",
    "SPLITBYCOUNT": "依批數分批",
    "ISPARTIAL": "是否部分報工",
    "INSTRUMENTBASISDATA": "儀器主檔",
    "MATERIAL OUT": "開立領料單",
    "REPORTGROUPNO": "群組編號",
    "MATERIALNAME": "物料名稱",
    "MATERIALLIST": "物料列表",
    "MATERIALMONO": "物料工單編號",
    "MATERIALINNO": "進料單編號",
    "MATERIALBACK": "退料",
    "MATERIALCODE": "MaterialCode",
    "MATERIALCOST": "材料成本(A)",
    "CURRENT STATE IS NOT ALLOW ALLOCATE": "目前狀態不允許撥轉",
    "QC DAILY OUTPUT": "品管產量日報查詢",
    "MATERIALSPEC": "物料規格",
    "MATERIALTYPE": "物料類別資料",
    "RPT_LOTSTATE": "生產批現況資料_快取",
    "MODULEORDER": "模組次序",
    "WIPINV": "在製品庫",
    "WIPERF": "加工異常",
    "WIPRLC": "退庫入庫",
    "WIPQTY": "WIP",
    "EQPBAKEPATTERNDEF": "Equipment Bake Pattern Define",
    "WIP SCRAP COMPONENT": "損壞_元件",
    "UNCONFIRMED": "未確認",
    "UNCONFIRMQI": "檢驗單品管項目清單",
    "QCDEDUCTION": "減項檢驗",
    "ROPROPERTYBASISDEF": "訂單屬性設定定義",
    "REPORTPRINCIPLEDEF": "報表原則設定定義",
    "TESTOUTOF": "連續檢驗批數",
    "ONLY CAN SELECT A NODE": "只能選取一個節點",
    "ISSUESTATE OF QCITEM IS NOT UNFROZE": "",
    "OTHERPARAMETER": "其它參數",
    "WOTYPE": "工單型態",
    "WFIDQTY": "WaferID 數量",
    "WLD1TO": "波長-迄",
    "WAITING TIME": "等待時間",
    "RULENO": "法則編號",
    "RUNMIN": "分",
    "RUNDAY": "日",
    "RTBIN6": "重測 Bin 6",
    "RTBIN7": "重測 Bin 7",
    "RTBIN4": "重測 Bin 4",
    "RTBIN5": "重測 Bin 5",
    "RTBIN2": "重測 Bin 2",
    "RTBIN3": "重測 Bin 3",
    "RTBIN1": "重測 Bin 1",
    "RTBIN8": "重測 Bin 8",
    "RELEASEMEMO": "結案註記",
    "MANODENO": "節點編號",
    "RELEASEDISP": "解除說明",
    "RELEASEDATE": "下線日期",
    "RELEASEFLAG": "Release Flag",
    "LEDTESTDATASPEC": "LED 測試資料過濾標準",
    "RELEASETYPE": "Release Type",
    "EQPDATATYPE": "設備資料類別",
    "DUPLICATE NAMING": "重複命名",
    "DTADDRESS": "DT 位址",
    "THIS FUNCTIONNAME CONDITION ARE INSUFFICIENT": "UNABLE TO OFFER VIEW THE FUNCTION",
    "MODULEBASIS": "製程模組資料",
    "PACKINGRULEBASIS": "FAB晶圓外箱規格設定",
    "SUCCESSFULLY": "成功",
    "OLDPASSWORD": "舊密碼",
    "MANUALQC": "手開",
    "PRDMAXTIMEDEF": "生產時間限制(站與站)定義",
    "FUTURE HOLD SET": "預先異常設定",
    "OPMODULE": "作業站資料",
    "SEARCHEQPPICTURE": "瀏覽圖片",
    "SURPLUS_QTY": "多餘數量",
    "LANGUAGEMODE": "語言模式",
    "PLEASE SELECT A EQUIPMENT STATUS WHICH YOU WANT TO CHANGE": "請選擇一個欲改變的設備狀態",
    "BOOKINGFLAG": "已開立工單",
    "NOT DEFINE ANY NODES": "未定義任何節點",
    "REPAIR": "維修",
    "REPORT": "報表",
    "RERUN3": "重新上線",
    "RERUN2": "重新上線",
    "RERUN1": "重新上線",
    "RERUN6": "重新上線",
    "RERUN5": "重新上線",
    "RERUN4": "重新上線",
    "RESULT": "結果",
    "RETURN": "退貨倉",
    "REASON": "原因",
    "RECIPE": "參數",
    "REDRAW": "重新繪製",
    "REELNO": "Reel No",
    "REJQTY": "退回數量",
    "REJLOT": "退回批",
    "REJECT": "不核准",
    "RELOAD": "更新資料",
    "REMOVE": "移除",
    "REMIND": "提醒",
    "REMARK": "Remark",
    "FQCFORMQCITEMMAP": "終檢檢驗單明細定義",
    "QC CONFIG": "基本資料",
    "NORMALTIMES": "正常連續N次Pass轉減項",
    "PROPRIVILEGE": "產品權限",
    "MONOINRETURNINVENTORY": "工單已在客託倉或退貨倉",
    "BR_LP_CI_NETDEF": "網狀製程報工出站定義",
    "NOT SELECT ANY COMPONENT": "沒有選擇任何元件",
    "RESETPASSWORD": "重設密碼",
    "RECIPENAME": "參數名稱",
    "RECIPEDATA": "設備參數資料",
    "OPERATORONLINE": "使用者登入(上工)資訊",
    "RECIPETEMP": "作業樣版",
    "ECNSTEP4TITLE": "定義因子",
    "RMADEF": "開立退貨單",
    "TESTOUTOFVR": "連續M點中",
    "TESTOUTOFSR": "連續M點中",
    "SOP BASIS": "標準作業程序",
    "PLEASE CHECK CARRIER STATE": "請重新檢查載具現況",
    "ISSUE_WO_ITEM_PROCESS": "工單備料狀態處理",
    "FROMSCRAPQTY": "From Scrap Qty",
    "MOQUERYDEF": "工單查詢定義",
    "ROW_ID": "序號",
    "AUDIOANS": "音頻分析儀(15)",
    "RIGHTB": ")",
    "CDEFECTUCL": "C-Chart Defect 管制上限",
    "CDEFECTLCL": "C-Chart Defect 管制下限",
    "ALERTEVENTSETTINGS": "警示事件設定",
    "INSTRUMENTTYPE": "儀器類別",
    "LOTPROPERTYADJUST": "生產批屬性調整",
    "INSTRUMENTNAME": "儀器名稱",
    "EMAILSUBJECT": "E-Mail 主旨",
    "CURSAMPLEPLAN": "目前抽樣計劃",
    "COMSEARCH_MULTI": "搜尋",
    "ERPWORKREPORT_CANCEL_E10ICD": "取消報工單_E10ICD",
    "FIRSTGROUPDEF": "第一處理群組定義",
    "ISAUTOSTOCKIN": "是否自動入庫",
    "DEST_COLUMN_TYPE": "目的欄位資料型態",
    "CARRIERSTATEDETAIL": "載具現況管理詳細資料",
    "SUCCESS": "成功",
    "QCOPPORTUNITYNAME": "檢驗時機名稱",
    "PRODUCTNONOTAPPROVED": "產品未核准",
    "SUBJECT": "訊息主旨",
    "SUBMONO": "子工單編號",
    "DELRELEASEDLOTDEF": "刪除已下線生產批定義",
    "SUBOPNO": "工序編號",
    "OP OF DEFAULT PROCES": "作業站資源",
    "VERTICALNUMBER": "橫向儲位數",
    "NORMALCOUNT": "Normal Count",
    "ECNSTEP5BTNNEXT": "下一步",
    "PLEASE SELECT AT LEAST ONE GROUP": "請選擇至少一個群組",
    "ALERTCREATOR": "建立人",
    "EQPQCLISTDETAIL": "設備點檢表明細",
    "THIS OP STATION HAS NOT SET OP STATION GROUP AND WILL RESULT IN AN INVALID RETURN ERP": "此作業站尚未加入作業站群組",
    "WIPLOT_HOTLOTANDPRIORITYCHANGE": "生產批緊急狀態/優先權調整",
    "CREATE LOT NET": "生產批開立_網狀製程",
    "COLUMNCOMPONENTNOISNOTEXISTINRAWDATA": "來源資料中不存在ComponentNo欄位",
    "_EMS_EQPCAPMAPPINGDEF": "設備能力設定定義",
    "CREATE LOT_LED": "生產批開立_LED",
    "PROGRAMDEF": "測試程式定義",
    "BR_CL_CI_FABFOUP": "企業邏輯 - 以載具過帳登入介面(Foup Check In)",
    "VIOLATESTATECHANGESETMATRIX": "設備狀態互斥設定",
    "QC_FORM_RESULT_PROCESS": "檢驗單結果判定作業",
    "SUMMARY": "總結",
    "IPQCFORMNO": "PQC檢驗單編號",
    "PRDOPSUBOP": "產品作業工序",
    "USER_DEFINE": "使用者自訂",
    "ENABLEFIXEDCOLUMN": "啟用固定欄位",
    "SHIFTDATA": "班別資料",
    "INVENTORY_FGDSTOCKIN_TP_CANCEL": "完工入庫取消_TipTop",
    "FUNCTIONFLOW": "流程選單",
    "BR_LB_MERGE_FT": "併批處理_等級",
    "SHIFTINSP": "每班檢",
    "FUNCTIONMENU": "功能選單",
    "SHIFTNAME": "班別名稱",
    "FUNCTIONNAME": "函式名稱",
    "FUNCTIONTYPE": "函式類別",
    "8DPRECAUSIONTRACKDATA": "預防項目追蹤資料",
    "SOURCE_COLUMN_TYPE": "來源欄位資料型態",
    "INVMATERIALWIPRETURN": "開立退料單(WIP)",
    "DATA COMMUNICATION FAIL": "資料傳輸失敗",
    "INSPECTIONMACHINEPARAMETERTYPEDATA": "檢測儀器類別資料",
    "HOLDITEM BASIS": "異常原因基本資料",
    "PARTIALQUANTITYBALANCE": "網狀報工數量平衡",
    "PLEASE ZERO THE ACCESSORY IN ACCESSORY LIFE MANAGEMENT FIRST": "配件需先至配件壽命管理功能中，將配件做歸零的作業",
    "WOFINISHDEF": "工單結案回報",
    "MSGINFO": "訊息通知",
    "RETURNDATE2": "還原日期",
    "WIPDATETO": "下線日至",
    "NODE NAME": "節點名稱",
    "ADDCUSTOM": "新增自訂事件",
    "SUBMATERIALLOTNO": "Subcontractor Material Lot No",
    "DIRECTOR": "負責人",
    "COPY FROM PRODUCT": "從產品覆制",
    "MTLVENDOR": "物料供應商",
    "INVMATERIALRETURNBASISDEF": "退料單主檔定義",
    "SPC_ERFBASISDEF": "SPC異常單查詢定義",
    "EQPTOTALINPUT": "總投入數",
    "EMS CONFIG": "EMS 設定",
    "PUBLIC": "公開的",
    "PUTSIN": "上載具",
    "RETURNVALUE": "回傳值",
    "INPUTSTRING1": "輸入字串",
    "MUSTSELECTEQP": "需選擇設備",
    "REPORTPRINCIPLE": "報表原則設定",
    "DATACONDITION": "條件式",
    "MUST DRAW PROCESS": "未畫流程",
    "EXECUTEARCHIVE1": "執行封存",
    "OFFLINEAG": "Offline",
    "MONO IS DIFFERENT FROM PACKCONFIG, REEXECUTE PACKCONFIG": "工單編號與包裝設定不同,是否要重要執行包裝前作業",
    "DEFECTCODE_CONTINUOUS": "缺點_連續型",
    "LINKACTION": "連結回應",
    "FGDINDETAIL": "成品入庫單明細資料",
    "RETURNTOINV": "歸還",
    "EQPBREAKDOWNDATA": "設備故障資料",
    "MUST LARGER THAN": "必須大於",
    "RETURNSTATE": "歸還狀態",
    "EQPSTATEBASIS": "設備狀態設定",
    "8DDISPOSITIONDATA": "處置對策資料",
    "LOTPROPERTYDEF": "生產批屬性定義",
    "YEARDEFDATA": "年度定義",
    "DECIMALPLACES": "小數位數",
    "ROWITHOUTCUSTOMERNO": "訂單未指定客戶編號",
    "UPLOADPATH": "上傳路徑",
    "BILLBOARD_OPOUTPUTSUMMARYSETUP": "看板設定",
    "INVMODULE": "庫存管理",
    "DISPHOUR": "耗用時數",
    "DISPCOST": "耗用成本",
    "DISPATCH": "派工",
    "INCONSISTENT": "不一致",
    "CLOSE LOT": "零批量生產批結批",
    "DISPDATE": "處置時間",
    "PSNAME": "區段名稱",
    "DISPTYPE": "處置類型",
    "EQUIPMENT CAPABILITY": "設備能力",
    "MTLTYPE": "物料類別",
    "MODULESERIAL": "模組序號",
    "PRINT1": "列印",
    "PRINT2": "列印",
    "PRIVNO": "權限編號",
    "MTLOPNO": "Material OP No",
    "UPDCHECKINTIME": "變更開始加工時間",
    "EQPSTATENAME2": "設備狀態名稱",
    "CLOSESEMI": "半成品庫",
    "GETPARAMETER": "擷取參數",
    "CLOSETYPE": "結案方式",
    "CLOSEDATE": "結案日期",
    "CLOSEFLAG": "Close Flag",
    "DISPATCHDEFINE": "設備派工定義",
    "DEFMODE IS NOT VALID": "模式無效",
    "DISTANCE": "距離",
    "PERIOD": "週期",
    "SHIPPINGINSTRUCTIONPICKUPDEF": "撿貨確認定義",
    "LOTBASISDEF_BATCHDEF": "生產批開立_批次定義",
    "SELECTCOMPONENT": "選擇元件",
    "PDDATE": "生產日期",
    "JAPANESE": "日文",
    "PDLINE": "產線",
    "EQPCONSUMESTATUS": "機台耗品現況",
    "EQC MERGE RULE": "電信(EQC)併批規則",
    "FGDLOCATOR": "成品倉儲位",
    "REPAIRDESCRIPTION": "維修描述",
    "PAGENO": "分頁編號",
    "REVISDATE": "修改日期",
    "PACKOI": "包裝規範",
    "LOTINFOMATION": "生產批資訊",
    "PALLET": "棧板",
    "ASSEMBLYNO": "零件編號",
    "WIPENDTIME": "結束時間",
    "ARCHIVETABLENAME": "封存資料表名稱",
    "ECNSTEP6TITLE": "完成",
    "PMPLAN": "保養計畫",
    "PMWONO": "工單號碼",
    "HAVECONTENTSHOW": "架位狀態",
    "QCITEM FOR ATTRIBUTES": "計數品管項目",
    "SERVERNAME": "伺服器名稱",
    "SERVERTIME": "伺服端時間",
    "PMFLAG": "專案負責人",
    "QUERY PRD DEFECT LOG": "Query Product Defect Log",
    "PMDATE": "PM Date",
    "PRDACCESSORYDEF": "產品使用配件",
    "DATACHANGERULE": "資料變更規則",
    "PLANNO": "計劃編號",
    "PLEASE": "請",
    "FIRSTINFIRSTOUT": "先進先出",
    "LOTSERIAL2": "生產批序號",
    "LOTSERIAL1": "生產批序號",
    "PIXELY": "像素 Y",
    "PIXELX": "像素 X",
    "EQPCOMPCYCLEBASISDEF": "設備圈別資料定義",
    "ACC EXECUTION": "配件_執行",
    "PIECE2": "片",
    "PIECE1": "片",
    "BATCHWAITNO": "批次等待(Wait)編號",
    "PICKUP": "撿貨",
    "RESULTLIST": "結果清單",
    "IS WRONG": "錯誤",
    "RESPRODUCTGROUP": "產品負責群組",
    "RESULTTYPE": "Result Type",
    "AREABASISDEF": "區域基本資料定義",
    "REFPRODUCTNO": "參考產品編號",
    "RESULTSHOW": "結果",
    "PORTID": "Port ID",
    "THE ITEM IS OUT OF STOCK": "此項目沒有庫存",
    "LABORCOST": "人工成本(B)",
    "PLANFINISHDATE1": "預計完工日",
    "CLOSEDEPARTMENT": "結案部門",
    "BILLBOARD_OPOUTPUTSUMMARY_TRENDCHART": "作業站時段產出_趨勢圖",
    "SELECTALLGROUPUSER": "選擇所有群組使用者",
    "BASELOTNO": "主批號",
    "L2_SOPPATH": "第二層指導書路徑",
    "INSTRUMENTBASISDEF": "儀器主檔定義",
    "IQCCOMBINEREPORT": "收料檢驗單CPK報表",
    "EQP FIXED TIME SETUP": "設備定次定時保養設定",
    "INSPMACHINEPARAMETERSETUPDEF": "品管項目檢測儀器對應定義",
    "PACKINGLISTDETAIL": "包裝清單明細",
    "KERNELFUNCTIONNAME": "核心函式名稱",
    "AUTORUNJOBS": "排程設定",
    "SUNDAY": "星期日",
    "EQPSTATEDATA": "設備狀態資料",
    "GET TEMPLATE FILE": "下載樣板檔案",
    "ADDLOTNO": "批號",
    "EQPSTATENAME": "設備狀態名稱",
    "ENDTIMETO": "至",
    "EQP QCLIST LOG": "設備點檢歷程",
    "PRD RECIPE": "產品參數",
    "SWBINNO": "Software_Bin",
    "STATUS": "狀態",
    "STEPNO": "作業站編號",
    "STDDEV": "標準差",
    "STDQTY": "單位標準用量",
    "CAN NOT SELECT QCITEM WITH COMPONENT COLLECT": "不允許執行元件收集的品管項目",
    "STRING": "字串",
    "USERCHECKOUTOPERATION": "人員登出作業",
    "SEARCHPRODUCT": "產品搜尋",
    "LOTBASIS_NET": "生產批主檔_網狀製程",
    "LOTBASIS_TAB": "生產批主檔_TAB",
    "HANDLERRECIPE": "Handler 參數",
    "SQLCMD": "資料指令",
    "CREATDATE": "建立日",
    "CREATEERF": "開立異常單",
    "CREATEQTY": "開立數量",
    "CREATELOT": "生產批開立",
    "EQP REAL TIME REPORT": "設備現況查詢",
    "STALREPORTVIEWER1": "Stal Report Viewer",
    "SCLASSNO": "次分類編號",
    "BATCHOPNO": "否",
    "ERPRETRANSACTION": "ERP資料重新接收",
    "SSLYES": "是",
    "PHASE BASIS": "階段設定",
    "SPECNO": "規格編號",
    "OPBASISDATA": "作業站主檔資料",
    "INVMATERIALOUTLOGDEF": "領料單記錄定義",
    "IPSPDESCRIPTION": "註記",
    "ADDTABLE": "新增資料表",
    "ALLOWNULL": "是否允許為空值",
    "EXCEPTIONTIME": "除外時數",
    "DISABLEFACTOR": "不顯示要因",
    "WAFERCONTENT": "圈別位置",
    "EXCEPTIONITEM": "除外項目",
    "QC DATA_V": "計量規格設定",
    "SEMI OUT LOG": "半成品出庫單記錄",
    "BR_LC_COCHANGECN_GEN": "BR_LC_COCHANGECN_GEN",
    "NEED ONE LABEL DETAIL AT LEAST": "最少需要一個節點明細",
    "ADDRESS2": "地址2",
    "ADDRESS1": "地址1",
    "SYSTEM": "系統",
    "SYSQTY": "系統數量",
    "ONLINE SHIFT OUTPUT": "班別產出查詢",
    "BASE AREA": "基底區域",
    "ECNSTEP1TITLE": "歡迎使用工程變更精靈",
    "SEMIINVENTORYNO": "半成品庫房編號",
    "IS EXIST": "存在",
    "IS EMPTY": "是空的",
    "NOT PREDICT SCHEDULE OF A WORKING DAY": "非於預測時期的工作天",
    "PACKINGLABELPRINT": "標籤補列印",
    "INV COUNT ADJUST": "盤點調帳",
    "SYSTEM UPDATE": "系統更新",
    "SET ON": "Use / Attach",
    "RPT_ON_LOTSTATE": "生產現況查詢",
    "SEARCH": "...",
    "REASONSUBTYPEBASIS": "品質原因子類別資料",
    "SECOND": "秒",
    "DEFINEDRULE": "定義的法則",
    "SEMIIN": "半成品入庫",
    "SELLOT": "選取生產批",
    "SELECT": "選取",
    "ELECTROSTATICNO": "靜電箱編號",
    "SWRTYPE": "特殊需求類型",
    "LIKE QUERY": "模糊查詢",
    "SAVEAS": "另存新檔",
    "YOU CANNOT SAVE FACTORS": "無法儲存要因",
    "SAMPLE": "抽樣",
    "DESIGNDOCNO": "Design Doc No",
    "MATERIALGUMTYPE": "膠類時效設定",
    "SCRAP1": "損壞",
    "SCRIPT": "描述語言",
    "REVERSEDECRIPTION": "還原原因",
    "SERIALSTRING": "序號編碼",
    "SCLOT1": "批",
    "DTHOSTBASISDEF_TCPIP": "DT Host 定義",
    "SMTYPE": "分批/併批",
    "RETICLESETVERSION": "配件組版本",
    "MODULE BASIS": "製程模組資料",
    "SOURCE": "來源",
    "USERAGENTDELDEF": "取消使用者代理人定義",
    "CICREATEDATE": "登入建立日期",
    "PMPLANCALENDARDEF": "保養日曆設定定義",
    "8DCLOSE8D": "D9結案作業",
    "USERAGENTDETAIL": "使用者代理人明細",
    "OPGROUPNO": "作業站群組編號",
    "LOTDISPOSITION": "生產批處置",
    "NOTICECUSTOMER": "通知客戶",
    "REPAIR START TIME": "維修開始時間",
    "SLEVEL": "檢驗水準",
    "LED_LOP1": "亮度",
    "OPATTRIB": "作業站特性",
    "SITENO": "廠區編號",
    "SIGNIN": "登入",
    "SIFLAG": "SI Flag",
    "ERPWORKRPT_DETAIL": "報工單拋轉明細資料",
    "SHOWBR": "顯示企業邏輯",
    "SHOW_M": "顯示",
    "SHOW_A": "顯示",
    "SHIPTO": "出貨至",
    "SHIFTA": "班別時間A",
    "SHIFTB": "班別時間B",
    "STAGENO": "製造層別編號",
    "PRODUCTOPCOPYDEF": "產品作業站批次複製定義",
    "STATUS2": "現況",
    "STATENO": "狀態",
    "QUERYBARCONTROLCHARTDEF": "管制圖分析定義",
    "PRODUCTMATERIALNAME": "品名",
    "DATAARCHIVEDEF": "數據封存定義",
    "INITFILEVERSION": "Init 檔案版本",
    "EXPANDPROCESS": "流程展開",
    "INVTRANSACTIONDETAIL": "交易明細",
    "LOTREPORTSTATE": "批報表狀態",
    "MATERIAL TYPE": "物料類別",
    "ARE YOU SURE TO UNPACK LOT FROM PACKING": "是否確定自包裝中移出生產批",
    "产品作业站资源检视": "",
    "MATERIALPROPERTYDEF": "物料屬性定義",
    "SHOWXAXISLABEL": "X座標軸標籤",
    "CONTLOGGROUPSERIAL": "Cont LogGroup Serial",
    "INSPMACHINE TYPE": "檢測機台類別",
    "DELETE BATCH LOT": "批次刪除已下線生產批",
    "COPYFROMPRODUCTTYPE": "複製自產品類別",
    "IEWMODULE": "預警管理",
    "ANSHISTOGRAM": "SPC直方圖",
    "INVSCRINVENTORY": "報廢倉庫房資料",
    "LOTNOPACKINGNO": "批號/包裝編號",
    "MATERIALBASISDEF_SPK": "物料主檔定義",
    "PRODUCT TECH SPEC": "Product Tech Spec",
    "FACTORY OF AREA": "區域的工廠設定",
    "NOT ALLOW TO INITIAL": "不允許初始化",
    "STOCKON": "上架",
    "ENGPROCESSDRAW": "工程資料流程繪圖",
    "CHILDAREATYPE": "子項區域類別",
    "STOPBIT": "停止位元",
    "PLEASE CHOOSE EMPTY CARRIER POSITION": "請指定一筆空載具位置",
    "ISSUE GROUP NO": "簽核群組編號",
    "SETSUBMTL": "設定替代料",
    "ADJUSTFUNCTIONMENU": "調整功能選單",
    "BYQCITEMTYPE": "依品管項目類別",
    "INTERFACEURL": "介面網址",
    "KERNALVERSION": "Kernal 版本",
    "EDITLANGUAGEDEF": "編輯語言定義",
    "CANNOT EXECUTE PACKING": "無法執行包裝",
    "NODEBRDEF": "企業邏輯主檔",
    "CNEWPASSWORD": "確認新密碼",
    "PRINT SHIPPINGLIST": "Print Shipping List",
    "WO_STATUS_PROCESS": "工單狀態變更",
    "RPTCHARTYMWCAPABILITY": "區間製程能力報表",
    "CREATELOTCOUNT": "開立批數",
    "COUNTWAYSHOW": "計量方法",
    "NODECOLOR": "填充顏色",
    "MATERIALOUTNO": "領料單編號",
    "LESEQUENCE": "Le Sequence",
    "CHANGEENGNO": "變更工程碼",
    "PICTURENAME": "圖片名稱",
    "PICTUREBODY": "Picture Body",
    "ERF RELEASE": "異常單解除",
    "EQ PERFORMANCE": "設備效率查詢",
    "NODEOPDEF": "作業站節點",
    "DUMMYNO": "控片編號",
    "PHASE NODE CANT SET PHASE": "階段節點不能設定階段",
    "MATERIALLEVEL": "物料／半成品",
    "MATERIALLOTSN": "Material Lot SN",
    "MATERIALLOTNO": "物料批號",
    "INCOMING QC FORM": "進料檢驗單",
    "M.T.T.R.": "MTTR : 平均修復時間(單位:小時)",
    "NOT BELONG TO D1 TEAMMEMBER": "不屬於D1團隊成員",
    "INVMATERIALADJUSTDEF": "開立庫存調整單定義",
    "INVMATERIALADJUSTLOG": "庫存調整單記錄",
    "PMWORELEASE": "保養工單下線",
    "M.T.B.F.": "MTBF : 平均故障間隔(單位:小時)",
    "ARRANGEALL": "安排全部",
    "ARRANGETOP": "對齊上方",
    "LOTBASIS_CELL": "生產批主檔_Cell",
    "LOTBASIS_TAPE": "生產批主檔_Tape",
    "LIMITTIME": "時間限制",
    "MATERIALGROUP": "物料群組資料",
    "QCRULEBASISDEF": "計量品管法則基本資料定義",
    "FORWARDER BASIS": "貨運行基本資料",
    "POLLINGRANGESTATE": "最大連接數",
    "BATCHMAXQTY": "批次加工上限",
    "CLOCKOUTED": "已登出",
    "AUTORPTMNTHVARCHARTDEF": "計量型自動寄送報表定義",
    "CHANGELOTNO": "變更批號",
    "MATERIALBASIS": "物料基本資料",
    "GROSSDIE": "Gross Die",
    "SAMPLINGPARAMETERSIMULATION": "抽樣參數模擬",
    "SETSCRIPT": "描述語言",
    "EXECUTE LOT CE": "生產批執行_網狀製程",
    "DISABLED_MONO": "停用",
    "GROUP NO": "群組編號",
    "GROUPAND": "And 群組",
    "GETFROMINVACC": "領用",
    "PACKBARCODE": "包裝作業刷卡",
    "REDICLE SET": "Redicle Set",
    "WAFERPRICE": "Wafer Price",
    "CHANGESTATE": "變更設備狀態",
    "SAMPLING1916DEF": "抽樣計劃設定_1916定義",
    "SPCSERIAL": "檢驗序號",
    "WAFER RECEIVING": "晶片收料",
    "COVERAGEDRECORDS": "受影響之資料",
    "I_TESTDATA_TARGETFOLDER": "測試資料指定路徑",
    "MO QUERY3": "工單達交率(準時完工)",
    "MO QUERY2": "工單達交率(準時開工)",
    "ARCHINITRIALCATELOG": "封存資料庫資料庫名稱",
    "OPERATORCLOCKINDEF": "使用者登入作業(上工)定義",
    "WIP SEMI INVENTORY": "在製品 - 半成庫",
    "INVENTORY QTY": "入庫數量",
    "SPLITWAFER": "分片",
    "BR_L_CO_PACKING_MOLINE": "包裝作業",
    "REPAIRTIME": "修復時間",
    "QUERY/REPORT": "查詢/報表",
    "REPAIRITEM": "維修項目",
    "REPAIRNAME": "維修名稱",
    "REPAIRDEPT": "維修單位",
    "REPAIRDATA": "維修資料",
    "REPAIRDATE": "Repair Date",
    "REPAIRABLE": "是否可維修",
    "INVMATERIALWIPRETURNLOGDEF": "退料單記錄(WIP)定義",
    "QRSSUMMARY1": "8D總結",
    "QRSSUMMARY3": "8D總結",
    "QRSSUMMARY2": "8D總結",
    "LIMITLOTNUM": "最大管制批數",
    "MATERIALSTATEMATERIALNONODENOTFOUNDORVALUEISEMPTY": "找不到用料清單物料編號節點或物料編號為空",
    "INVENTORYNAME": "庫房名稱",
    "RERUNGOODQTY": "重新上線良品數",
    "INVENTORYDATA": "庫房資料",
    "INVENTORY_WIP": "在製品庫帳務維護",
    "INVENTORY_FGD": "成品庫帳務維護",
    "INVENTORYTYPE": "庫房類別",
    "UNSELECTPARAMETER": "未選參數",
    "ECNSTEP3TITLE": "選取與變更特性值",
    "EXPIREDATEFLAG": "保存期限管理",
    "EQUIPMENT CHECK IN": "設備check In",
    "INVSEMIOUTDETAILDEF": "半成品出庫單明細定義",
    "DIVIDING": "",
    "REFERENCELOTNO": "參考批號",
    "WAFER_SIZE": "Wafer Size",
    "IS NOT ALLOW TO BE THE SAME WITH CURRENT DB": "不可與目前連線DB相同",
    "SPLIT_COMP": "分批處理",
    "SHIPDESTINATION": "出貨目的地",
    "MATERIALQCITEMSET": "物料品管項目設定",
    "PRD WIP STATE AND YIELD REPORT": "產品作業站現況&良率報表",
    "MATERIALSTATE": "物料現況",
    "ININVENTORYNO": "In Inventory No",
    "MOTYPEBASIS": "工單類別設定",
    "SOPBASIS": "標準作業程序",
    "LOT QUANTITY MUST BE EQUAL": "生產批數量必須相同",
    "CURRENTPSPROCESS": "目前區段所有流程",
    "YEARNO": "年度",
    "CAN NOT EMPTY": "不能為空",
    "CHECKPROGRESS": "進度檢查",
    "FLOWBASISDEF": "系統建模定義",
    "MAINTENCE OPERATION DOES NOT ALLOW THE COMBINATION OF MOLD WITH EXIST MOLD FIXTURE": "維修作業不允許組合配件內存在組成配件!",
    "PRODUCTOUTPUTDTL_MONTH": "產品入庫月報明細",
    "CAN NOT FOUND": "找不到",
    "CREATE LOT": "生產批開立",
    "CREATE RMA": "開立退貨單",
    "DTBASIS": "DT 主檔",
    "INSPMACHINESETUP": "檢測機台設定",
    "SPLITBYQTY": "依批量分批",
    "GRADEPRIORITY": "等級優先權",
    "EQPMATERIALSTATE": "設備上料現況查詢",
    "CURVERSION": "目前版本",
    "CREATEDATE": "建立日",
    "CREATELOT4": "生產批開立",
    "CREATELOT2": "生產批開立",
    "CREATELOT3": "生產批開立",
    "PRODUCTLOADDEFAULT": "載入產品預設",
    "CREATETYPE": "開立方式",
    "CREATETEAM": "建立團隊",
    "OPSEQUENCE": "工序",
    "SPLITCOUNT": "分批批數",
    "REFERENCENO": "參考編號",
    "SUM OF SPLITSYSQTY": "分批總系統數量",
    "SETBARCHART": "長條圖設定",
    "TOTAL QTY/YIELD": "Total Qty/Yield",
    "LOT MERGE_PCS": "併批處理_PCS",
    "LOT MERGE_BIN": "併批處理_等級",
    "PROCESSORDER": "Process Order",
    "SPLITMERGE": "分批 / 併批",
    "LIFETOLERANCE": "預計超過壽命是否仍可加工",
    "UNSELECTUSER": "未選的使用者",
    "MOCLOSEFLAG": "工單結單",
    "MOCLOSEDATE": "工單結案日",
    "UNSELECTDATA": "未選的資料",
    "UNSELECTALL1": "全不選",
    "WAIT RELEASE": "等待解除",
    "WIPLOTQTYADJUST_PARTIALDEF": "生產現況調帳作業定義",
    "PRD BASIS": "產品基本資料",
    "SAMPLEPLANCHANGEDEFINE": "抽樣計劃轉換定義",
    "EQPCAPMAPPINGDEF": "設備能力設定定義",
    "ISSUEFORM": "簽核控制表單",
    "CREATOR_MO": "工單建立人",
    "ISSUEDATE": "簽核時間",
    "ISSUEDATA": "簽核資料",
    "PRSAPSINTEGRATIONDEF": "設備工時",
    "EDITFLAGNAME": "是否編輯",
    "NEXTGROUPNO": "下一個群組編號",
    "ISSUE JOB": "簽核工作定義",
    "NECESSARYCONDITION": "必選條件",
    "SPLITLOTNO": "子批批號",
    "BUSINESS RULE BASIS": "企業邏輯",
    "PLANSTARTDATE": "預計生產日",
    "EQPTYPEIMPORT": "設備類別匯入",
    "EDITPROPERTY": "修改屬性",
    "PROCESSDATE2": "執行時間",
    "PROCESSDATE3": "執行時間",
    "PROCESSDATE1": "執行時間",
    "RECIPEDETAIL": "設備參數明細",
    "RPTLOTHISTORY": "生產批歷程及現況查詢",
    "MATERIALOPTIONISEQP": "作業站用料選項是設備",
    "DO YOU WANT TO REPLACE IT": "確定要取代嗎",
    "PROCESSCLASS": "流程分類",
    "REFRESHCHART": "更新圖形",
    "FINALLOSSQTY": "最後遺失數",
    "JUMPPROCESS": "跳流程",
    "TOTAL SAMPLE": "總樣本數",
    "BR_L_CO_PACKING_LOT": "包裝作業",
    "PLEASE VERIFY D3 ACTION FIRST": "請先驗證行動對策資料",
    "PROCESSBASIS": "流程基本資料",
    "EQUIPMENTSTATELOGQUERY": "設備歷史資料查詢",
    "WIPDATE": "下線日",
    "WIP_INV": "線邊倉",
    "WIPSEMI": "在製品庫",
    "GROUPMATERIALNO": "群組-物料編號",
    "WIP INV": "在製品庫帳務維護",
    "WIP NET": "網狀製程",
    "COMBINEACCESSORYCATEGORY": "組合配件分類",
    "YEAR_MONTH": "Year Month",
    "EQPBREAKDOWNREGISTER": "設備故障登錄",
    "ACC ISSUE MATERIAL": "發料作業",
    "EQP MAINTENANCE PLAN ADJUST": "保養計劃變更",
    "ECNSTEP2TITLE": "工程變更設定開始",
    "SERIALRULEBASISDEF": "序號規則定義",
    "SHOULD BE EMPTY": "應為空",
    "BATCHLOTNO": "批次批號",
    "ANSPARETORANKDETAIL": "柏拉圖等級明細",
    "NO LIMITSPEC OF THIS SPCCHART": "找不到管制圖規格設定",
    "BATCHOPYES": "是",
    "WAITOFPRODUCTION": "暫停生產",
    "ANSBMPCHART": "Ans Bmp Chart",
    "PACKINGRULEBASISDEF": "FAB晶圓外箱規格設定",
    "CONT_ATTRIB_ADJUSTLOGQUERYDEF": "生產批作業站製程特性值異動記錄定義",
    "EQUIPMENTTYPEUPD": "設備類別批次更新",
    "EQUIPMENTTYPEDEF": "設備類別資料定義",
    "BATCHECNNO": "批次ECN編號",
    "WINDOWS": "視窗",
    "DATASOURCES": "資料來源",
    "SPLITCOUNTQTY": "批數/批量",
    "MAINTENANCE TYPE": "維修類別",
    "MAINTENANCE ITEM": "維修項目",
    "ACCESSORYBARCODE": "配件條碼",
    "INVPREORDERLOG": "預訂單記錄",
    "INVPREORDERDEF": "開立預訂單定義",
    "SERIALCODEFLAG": "序號編碼項目",
    "NOTALLOWTOUSEFUNCTION": "無法使用此功能",
    "SSELALL": ">>",
    "SELECTLOT": "生產批執行",
    "SELECTALL": "全選",
    "REASONNO": "原因編號",
    "PRODUCTOPCOPY": "產品作業站批次複製",
    "PRODUCTOPAREA": "作業站資源",
    "SOURCEFORMNO": "來源單號",
    "OQCFORMDEF": "出貨檢驗單定義",
    "HOLDITEMDISPOSITION": "異常原因處置",
    "SEMIDETAIL_BIN": "在製品_等級明細",
    "YIELD(%)": "Yield(%)",
    "WIPSWRBASIS": "特殊需求維護",
    "TRACERESULT": "追蹤結果",
    "WIPLOTSELECT RFID": "生產批執行_RFID",
    "ATTRULENO": "判別法則編號",
    "RODETAIL": "訂單明細",
    "ERPWORKREPORT_CANCEL": "取消報工單_TipTop",
    "RODEFINE": "訂單定義",
    "PACK / INV": "包裝 && 庫房",
    "LAST4WEEK": "前四週",
    "INVMATERIALINLOGDEF": "進料單記錄定義",
    "QCITEM_A RULE DATA": "計數判別法則基本資料",
    "SCHEDULE": "排程",
    "LOT IS ON CARRIER, NOT ALLOW TO RECARRIERIN": "生產批已在載具上,不允許重新再執行上載具",
    "FROM-FLOWNO": "原程序編號",
    "RMACOMPONENT": "RMA Component",
    "STARTBRNO CAN NOT BE CHECKOUT": "開始企業邏輯不可為Check Out",
    "PRODUCTPACKINGRULEMAPDEF": "產品包裝規則對應設定定義",
    "INVPRODUCTINBASIS": "入庫單主檔",
    "CHINESE WORD": "中文字元",
    "IS NOT BELONG TO ANY OTHER MO": "不附屬於其他工單",
    "CURRENT STATE": "現況",
    "MOFINISHSTATE": "完工狀況",
    "ACC CATEGORY STATE": "配件分類狀態定義設定",
    "EQPACCSTATEDATA": "配件狀態資料",
    "BR_L_COOS_GEN": "企業邏輯 - 外包生產登錄介面(Check Out)",
    "PROCESS TYPE": "流程類別",
    "EXPORTALLERROR": "匯出全部不良原因",
    "REASONSUBTYPEDEF_8D": "8D 原因子類別定義",
    "LOTPROPERTYDEF_LOTCREATE": "生產批屬性定義_生產批開立",
    "ACCEPTED": "允收",
    "MEUNITEMTYPE": "選單項目類別",
    "MESSAGEQUEUEBASISDEF": "訊息佇列基本資料定義",
    "DEFROSTMAXHOUR MUST BE INTEGER": "最大回溫時效必須為數值",
    "OTHERTABLE": "其他資料表",
    "RESUMRETURN": "重滾重拋",
    "READTIME": "閱覽時間(秒)",
    "DRAWMAP": "繪圖",
    "DRAWOUT": "取出",
    "ANSVARSETTINGMEMO": "備註說明",
    "ATTRBUTES": "計數型",
    "INSPMACHINE PARAMETER TYPE": "檢測儀器類別",
    "MOTYPEDEF": "工單類別定義",
    "MOTYPE NO": "工單類別編號",
    "ALERTEVENTLOG": "查詢警示觸發記錄",
    "CANSAMPLEQTYBEBIGGERTHENPOPULATIONQTY": "抽樣數是否可大於母體數",
    "DATAARCHIVEBASIS": "數據封存主檔",
    "PERIODMIN": "定時檢間隔時間",
    "PERIODNUM": "區間單位數",
    "ERPFLAG MUST BE -1": "ERP拋轉狀態必須為取消",
    "INTERNALFAILURECOST": "內部失敗成本總計(D)=A+B+C",
    "REALOSNO": "Realos No",
    "CHANGEAQL": "更換AQL",
    "TOTAL_PALLETQTY": "總棧板數量",
    "CAN NOT FIND PLANNO DATA": "找不到計劃編號",
    "INVENTORY_FGDDEF": "成品庫帳務維護定義",
    "OCAPLINKNAME": "OCAP處置結果",
    "RPT_SCRIPT": "描述語言報表",
    "ERROR  LOG": "錯誤記錄",
    "OPERATOR": "作業人員",
    "PAGE SHIPPING LABEL PRINT": "Page出貨標籤列印",
    "QCITEMGROUPBASIS": "品管項目群組基本資料",
    "INVSTOCKERBASISDEF": "儲位基本資料定義",
    "ERROR DATA": "不良原因",
    "ATTRIBUTE": "特性",
    "MODULENODEID": "模組節點ID",
    "OCAP VERSION": "OCAP 基本資料定義",
    "WOCREATEDATE": "保養工單開立日期",
    "ACCSTATE": "配件狀態",
    "GETSHIPPINGLOTNO": "Get",
    "OPENFILE": "開啟附件",
    "OPENDATE": "OP End Date",
    "SELECTEQUIPMENT": "選擇機台",
    "SEARCHEND": "擷取碼數(迄)",
    "SEARCHXML": "XML字串搜尋",
    "SO NOT ALLOWED TO RECREATE ERF": "不允許重新建立異常單",
    "WIPRETURN": "退料",
    "PARENTAREANO": "主要區域編號",
    "IS GREATER THAN": "大於",
    "SEARIALNO": "Searial No",
    "SPC ERF": "SPC 異常單",
    "SPC COA": "出貨報告",
    "FROMACTIVE": "已簽核",
    "SPC_COA": "出貨報告",
    "PLEASESETATBELOWFUNCTION": "請至以下功能設定",
    "XLSFILENAME": "來源檔案名稱",
    "COMPONENTCOLLECT": "輸入元件資訊",
    "MINREASONABLEVALUE": "合理最小值",
    "ARCHUSERNO": "封存資料庫使用者",
    "STD_CARTONQTY": "大箱滿箱數設定",
    "WEEKINSPECTION": "每週檢",
    "ACC CONFIG": "配件",
    "SPONSOR": "發起人",
    "RELATIVE DETAIL(PROCESS、PROPERTY...) WILL BE OVERRIDDEN": "ARE YOU SURE TO CONTINUE",
    "SYSTEMPRIVDEF": "系統權限定義",
    "SN_B_DECIMALTYPE": "小箱編碼進位方式",
    "NUMERAL WORD": "數字字元",
    "SORTER_PKGQTY": "最小包裝量",
    "WP_8DACTIONDETAILDEF": "行動對策明細資料定義",
    "YOU CANNOT COPY DATA": "無法複製資料",
    "LABELDATA": "標籤設定",
    "YIELD REPORT": "產品作業站良率查詢",
    "LABELRULE": "標籤規則",
    "SWBINVALUE": "Bin值",
    "LABELPATH": "範本名稱與路徑",
    "PMITEMNO": "保養項目編號",
    "LABELTYPE": "標籤類型",
    "LABELTEST": "標籤列印",
    "NEEDWORDS": "至少要有N個字元",
    "SEQUENCE": "次序",
    "PRDQCDATAIMPORT": "產品品管項目匯入",
    "NOTHING TO RELEASE": "無資料可下線",
    "SOME TEST VALUE OF QCITEMNO": "品管項目編號的部分Test Value",
    "MESPARAMETERSQLCMDDEF": "資料來源SQL指令定義",
    "MESPARAMETERSQLCMDMAP": "資料來源SQL指令",
    "MOTYPE NAME": "",
    "BR_CL_SPLIT_GENDEF": "分批處理_載具定義",
    "RETURNLOTCOMPDEF_LED": "線上退料單開立_LED",
    "CSCRAPUS": "C-Chart Scrap 規格上限",
    "CSCRAPLS": "C-Chart Scrap 規格下限",
    "CSCRAPCL": "C-Chart Scrap 管制中心",
    "PROCESSATTRIBDATA": "流程特性資料",
    "RECIPEDETAILINFORMATION": "設備參數明細資訊",
    "INSPEQUIPMENTSTATE": "改機檢狀態",
    "EQPAVAILABLETIME": "稼動時間(分鐘)",
    "WIP STATE REPORT": "WIP現況報表",
    "ZH-CHS": "簡體中文",
    "ZH-CHT": "繁體中文",
    "LOTCOMPONENT": "生產批元件",
    "LOCATOR NO EDIT": "儲位編號編輯",
    "RETURN EQP ACCESSORY": "配件下機",
    "BR_LP_CO_NET": "網狀製程報工出站",
    "BR_LP_CO_GEN": "部份報工出站",
    "EQPBREAKDOWNREGISTERDEF": "設備故障登錄定義",
    "MODELVERSION1": "模型版本",
    "QUERYQCITEM_V": "查詢計量品管項目",
    "QUERYQCITEM_A": "查詢計數品管項目",
    "PLEASE SELECT AT LEAST ONE OUTLINE": "請至少選擇一個框線",
    "YEARBASISDEF": "年度定義定義",
    "BR_LP_CI_NET": "網狀製程報工進站",
    "BR_LP_CI_GEN": "部份報工進站",
    "LOT HISTORY_FACTORY": "生產批跨廠區歷程明細查詢",
    "DELETE RELEASED LOT": "刪除已下線生產批",
    "SYSPRIVILEGEDATA": "系統權限資料",
    "UNSELECTALLFORM": "全不選表單",
    "SERIALRULEDEFAULT": "預設標準序號",
    "EQUIPMENT BREAKDOWN BASIS": "故障原因基本資料",
    "MESPRODUCTVER": "產品版本",
    "WIPQCITEM": "WIP QC Item",
    "CHANGE PASSWORD": "變更密碼",
    "EQPTYPECONSUMEBASIS": "設備耗品主檔",
    "WFERPUSEMESUSERNO": "使用MES帳戶產生WF ERP單據",
    "INSPDRIVERDEF": "檢測機台連線程式定義",
    "GOOD QTY": "Good Qty",
    "CASSETTE CONFIG": "Cassette 設定",
    "SWR BASIS": "特殊生產需求維護",
    "QUERYSCATTERCHART": "散佈圖分析",
    "GOODQTY2": "良品數(修)",
    "GOODQTY1": "良品數(原)",
    "MANAGERNO": "負責人",
    "PROCESSTUNING": "流程調整",
    "PRODUCTOPDESCRIPTIONDEF": "作業站說明設定",
    "RETICLESET": "配件組",
    "SUMMARYSTART": "彙整開始時間",
    "ACTIONDETAIL HAVE BEEN VERIFIED！": "該對策已有驗證",
    "GROUPQCITEM": "品管項目群組",
    "SAVETOQCITEM": "存入至品管項目",
    "EQPQCLISTLOGDEF": "設備點檢歷程定義",
    "LATESTVERSION": "最新版本",
    "ACCLIMATION": "退冰回溫",
    "SUBSTITUTE MATERIAL": "替代料",
    "EQP_CARRIER": "設備與載具",
    "COM_PROCESSDRAW": "流程顯示",
    "SCENARIODEFINE": "劇本定義",
    "WAFERSAMPLINGPLAN": "抽樣計劃_晶圓",
    "STRETCHIMAGE": "延展",
    "EXCEED THE NUMBER OF QCITEMS THAT HAVE TO COLLECTED": "已超出應收集的品管項目個數",
    "INSPTYPE_FAI": "首件",
    "INSPTYPE_PQC": "出站檢驗",
    "CHECK DATABASE ID FAIL": "檢查資料庫ID失敗",
    "NODEXMLSTRING": "節點XML字串",
    "HAVE NOT ANY LOT ON CURRENT CARRIER": "目前載具無任何生產批",
    "WAITLCMERGERULE": "併批規則: 相同站點、相同BR、Lot Wait",
    "GOOPTION": "續Go選項",
    "RISKVALUE": "風險值",
    "WP_8DQUESTIONDEF": "問題描述資料定義",
    "ACCUMULATED DATA WILL BE CLEARED AFTER CONFIRMING": "確定後將清除累計資料",
    "WIP INVENTORY": "在製品庫庫房資料",
    "RECEIVER": "Receiver",
    "ONLY CAN SELECT A MATERIAL LOTNO": "只能選擇一個物料批號",
    "YEAR DEFINITION": "年度定義",
    "CHARTMONTHREPORT": "管制圖月報表清單",
    "QC RULE BASIS": "計量品管法則基本資料",
    "INVMATERIALOUTBASIS": "領料單主檔",
    "RECIPEID": "參數識別碼",
    "RECIPENO": "參數編號",
    "RIGHT PART OF CHARACTER": "從右側擷取部分字元",
    "TUNINGPROCESS": "Tuning Process",
    "BORDERSETTING": "邊框設定",
    "BR_L_CO_SPLIT_NEWPART": "企業邏輯 - 生產登錄時可同步分批並變更產品編號",
    "STD_BOXQTY": "小箱滿箱數設定",
    "INSPECTIONTYPE": "品檢類型",
    "FROMCREATE": "從建立日期",
    "OPGROUPBASISDEF": "作業站群組資料定義",
    "MONTHPRTCODEBASISDEF": "管制圖月報表編碼定義",
    "MATERIALLOTNO NO FIND": "工單元件上無物料批號資訊",
    "PRDAPSINTEGRATION": "APS整合",
    "FILENAME04": "檔案4",
    "FILENAME05": "檔案5",
    "FILENAME01": "檔案1",
    "FILENAME02": "檔案2",
    "FILENAME03": "檔案3",
    "ISSUE JOB MAP": "簽核流程對應",
    "ISSUE JOB LOG": "簽核歷史資料查詢",
    "TIMEUPACTIONSHOW": "時間到之動作",
    "V_COUNT": "V Count",
    "OPNODEGROUPDETAIL": "作業站節點群組明細",
    "TESTOUTOFV": "連續M點中",
    "TESTOUTOFS": "連續M點中",
    "TESTOUTOFL": "連續M點中",
    "TESTOUTOFO": "連續M點中",
    "DELAYFINISHMOTOTAL": "延遲完工單數",
    "LOT OP CONT ATTRIB ADJUSTLOG": "生產批作業站製程特性值調整記錄查詢",
    "IS NOT ON OUT SOURING OP": "不在外包站",
    "EQPACCUMULATEDTIME": "預估設備工時累計",
    "DATAVIEWTYPE": "資料檢視類別",
    "ARE YOU SURE TO CONFIRM ALL SELECTED RECORDS": "您確定要確認所有選擇的資料",
    "TARTFROM": "Tart From",
    "WAFERSIZE": "晶圓尺寸",
    "FOUPINFO": "Foup 資訊",
    "EQPQCLISTLOGDETAIL": "設備線上點檢歷程明細檔",
    "ACCESSORYDATAIMPORT": "配件基本資料匯入",
    "IS ONLINE DATA(WIP)": "於在製品管理模組中所做的SPC資料蒐集開出的異常單",
    "UNRELEASE": "未下線",
    "THIS OPERATION WILL NOT CHANGE EQUIPMENT STATEUS": "這項操作將會改變設備狀態",
    "CASSETTE BASIS": "Cassette 主檔",
    "ARE YOU SURE TO CLOSE LOT EXECUTION AND START INV COUNTING": "是否確認盤點關帳",
    "OPERATOR LOGIN": "使用者登入站別/區域",
    "INVMATERIALRETURNDETAIL": "退料單明細",
    "ABNORMALTYPEDEF": "不良現象類別定義",
    "WIZARDDESCRIPTION": "說明",
    "ACTIVESTARTDATE": "作用開始時間",
    "EQPQCLISTLOGBASIS": "設備線上點檢歷程主檔",
    "XTREND": "X Trend",
    "USERCHECKINOPERATION": "人員登入作業",
    "FUTUREHOLDRELEASEDEF": "預先異常解除定義",
    "IMPORT FILE FORMAT IS ERROR": "匯入檔案格式錯誤",
    "PRODUCTBASISDEF_SPK": "產品設定定義",
    "DEFROSTMINHOUR MUST BE INTEGER": "最小回溫時效必須為數值",
    "RAWDATABASIS": "原始檢測資料",
    "REPORT BASIS": "報表基本資料",
    "ONLINE FACTORS OF TWO QCITEMS DO NOT MATCH": "兩品管項目之線上要因不相符",
    "MONOCLOSED": "工單已結案",
    "ACCESSORYSTATEMONITORDEF": "配件狀態監控定義",
    "SHIPADDRESS1": "出貨地址1",
    "SHIPADDRESS2": "出貨地址2",
    "MODELBASIS": "模型主檔",
    "PLEASE SET DEFROSTMINHOUR FIRST": "請先設定最小回溫時效",
    "INVCOUNTADJUST_PRD": "盤點調帳(PRD)",
    "INVCOUNTADJUST_MTL": "盤點調帳(MTL)",
    "ACC TYPE": "配件類別資料",
    "CREATEBYCOUNT": "批數開批",
    "SUBSTITUTIONBASISDATA": "備品主檔資料",
    "YOU CANNOT EDIT DATA": "無法編輯資料",
    "OPGROUPDETAILDEF": "作業站群組明細定義",
    "THE XLS FILE S/N DOES NOT AGREE WITH THE LOTNO": "找不到此生產批所對應的資料",
    "GOSEMIINV": "入半成品庫",
    "PACKAGETYPEDEF": "封裝型別定義",
    "INVMATERIALWIPRETURNBASISDEF": "退料單(WIP)主檔定義",
    "MOMATERIALRETURNERP_TP": "工單退料至TipTop ERP",
    "MOMATERIALRETURNERP_WF": "工單退料至WorkFlow ERP",
    "LOTLOG_REPORTDEF": "生產批歷程明細查詢定義",
    "OPERATOR ONLINE": "使用者登入(上工)資訊",
    "ISSUESTATE OF QCITEM IS NOT UNFROZEN": "此品管項目之狀態不是未核准",
    "ERRORINPUT": "不良原因登錄",
    "LOTPROPERTYADJUSTDEF": "生產批屬性調整定義",
    "ERRORLEVEL": "不良原因等級",
    "FILEATTACHMENT": "附件",
    "TASKDESC": "權責說明",
    "BILL BOARD": "看板",
    "FROMOPRECIPET": "來自作業站樣版",
    "BASISDATABUILD": "基本資料建立",
    "USERGROUP": "使用者群組",
    "CUSTOMERNAME": "客戶名稱",
    "SYSTEMUSERMENU": "使用者自訂選單",
    "PMWORKORDER": "預防保養工單",
    "ONLY ADMINISTRATOR CAN SET GROUP MEMBER": "只有Administrator可以設定群組",
    "XGRAPH": "X Graph",
    "NUMCUSTOMERLOTNO": "保留/截去 碼",
    "ENERGYVALUE": "曝光能量",
    "INVSEMIINCONFIRM": "半成品入庫單確認",
    "SERIALNO": "序號",
    "LOCATOR BASIS": "儲位基本資料",
    "ERRORBASIS": "不良原因基本資料",
    "USERAGENT": "使用者代理人",
    "OPOUTPUTQTY": "本站可產出數",
    "WIZARDTOP": "Wizard Top",
    "SPECBASIS": "SPEC Basis",
    "POINTAREA": "點/每區",
    "USERLOGIN": "使用者已登錄",
    "USERLEVEL": "使用者等級",
    "MODELBASISDEF": "模型主檔定義",
    "VERTICALPOSITION": "垂直位置",
    "FACTORYBASISDATA": "工廠主檔資料",
    "SPECIFIED": "指定",
    "NEXTRUNTIME": "下次執行時間",
    "OCAPNEXTGROUP": "下一處理群組",
    "WAIT BASIS": "等待單資料",
    "CUNSUMNAME": "耗品名稱",
    "INCLUDERETESTLOT": "包含重檢批",
    "QCATTGROUP": "計數群組",
    "EQPACCSTATE": "配件狀態",
    "QUERYPARETODEF": "柏拉圖分析定義",
    "MAX DATE": "最大日期",
    "WIP_IC_CP_PKG": "芯片測試生產管理",
    "VARDATA": "計量型資料",
    "PRODUCTTYPEDATA": "產品類別資料",
    "PRODUCTTYPECODE": "產品類別代碼",
    "NEWFACTORYNO": "目標工廠編號",
    "INV BASIS": "庫房基本資料",
    "ORDER INV": "Order Inventory",
    "CURRENTPROCESS": "目前流程",
    "FILLCOLORSETTING": "填滿色彩設定",
    "CUSTOMERLOTNO_MO": "工單客戶批號",
    "ORDERLINE": "Order Line",
    "ORDERDATE": "訂單日期",
    "MEMBERTYPE": "成員類型",
    "ORDERTYPE": "工單型態",
    "MEMBERNAME": "成員姓名",
    "NUMLOTNO": "保留/截去 碼",
    "DVERIFY": "驗證對策",
    "PLEASE SELECT ONE DISPOSITION OR RELEASE OPTION": "請選擇處置或解除選項",
    "SPECVALUE": "SPEC Value",
    "ACCVIOLATESTATECHANGESETDEF": "配件狀態互斥設定定義",
    "ACCESSORY TYPE": "配件類別",
    "INV_RAW_ACCLIMATION": "退冰作業(膠)",
    "CONTROLFACTOR": "收集因子",
    "REELDATA": "Reel Data",
    "WOITEMSTATUS": "工單明細狀態",
    "MSA QUERY GRR DATA": "MSA資料查詢",
    "BYPRODUCT_COMPONENTNO": "依不同產品編碼",
    "SERIALRULEFOLLOWLOTNO": "原生產批編碼規則繼續編號",
    "DATAARCHIVINGDEF": "數據封存定義",
    "MATERIALLISTUNITNODIFFERENT": "用料清單單位不一致",
    "SAMPLINGTABLEDEF": "抽樣表格定義",
    "DAILYINSPECTION": "每日檢",
    "BRNO ALLOW LIMITED TIME CONTROL FUNCTION IS DISABLE": "企業邏輯未啟用生產時間限制管理",
    "SPCQCFORMQCITEMMAP": "檢驗項目",
    "EX_PRDTYPE1": "EX_PRDTYPE1",
    "EX_PRDTYPE2": "EX_PRDTYPE2",
    "PLCONTDIALOG": "",
    "CARRIERCAPACITY": "載具容量",
    "QCATTRULEMAPPARAMETER": "計數品管項目與判別法則對應參數",
    "ADJUSTQTY": "調帳值",
    "WAFER SAMPLING PLAN": "抽樣計劃_元件",
    "ACTUALENDDATE": "實際完工日",
    "VALUEVR": "參考值的範圍",
    "VALUESV": "特殊值",
    "VALUESR": "標準差的倍數",
    "VALID_1": "有效",
    "PDLINENO": "生產線別編號",
    "EQUIPMENTTYPEDATA": "設備類別資料",
    "PRDESOPBASIS": "產品-eSOP設定",
    "DATA EDIT LOG": "資料修改記錄",
    "CONDITIONNO": "條件",
    "CONDITIONOP": "條件式作業參數",
    "INVSEMIINBASISDATA": "半成品進料單",
    "SAMPLINGPLANDEF": "抽樣計劃定義",
    "QUANTITY": "數量",
    "OPERATORLOGINLOG": "使用者登入記錄",
    "EQPCAPMAPPING": "設備能力設定",
    "SCRAPTOTALQTY": "損壞總數",
    "CONFIRM NEW PASSWORD IS NOT SAME WITH THE NEW PASSWORD": "新密碼確認不一致",
    "INPUT QTY": "輸入數量",
    "INPUT LOT": "Input Lot",
    "RAWWAFER": "基板物料",
    "INPUTRANK": "輸入等級",
    "INPUTTIME": "投入工時",
    "INPUTTYPE": "輸入類型",
    "INPUTDATA": "輸入資料",
    "INPUTDATE": "輸入日期",
    "INPUTOPNO": "用料作業站",
    "INPUTINFO": "登入資訊",
    "QC ITEM FOR VARIABLES": "計量檢驗",
    "REFLOTNO": "參考批號",
    "CANNOTEXECUTEWITHCOMPFAILBIN": "一張入庫單不支援同時有Component與FailBin資料",
    "CHANGELOTPRODUCTDEF": "生產批產品變更作業定義",
    "PRODUCTINDETAILDEF": "入庫單明細定義",
    "ALLOWCHANGEDATA,PLEASECHECK": "會變更相關資料，請確認是否繼續執行",
    "RT_RULELOGQUERY": "生產批執行法則查詢",
    "WORKDAY": "歸屬工作日",
    "WORKQTY": "Work Qty",
    "PRDQCRULEBASISDEF": "產品抽樣頻率規則定義",
    "THE JOB NOW IS RUNNING. YOU CAN NOT RUN IT AGAIN AT SAME TIME": "現在的工作運行中。你不能在同時運行",
    "ACCPROPERTY": "配件屬性",
    "SCHEDULESET": "排程設定",
    "SYSTEM PARAMETER": "系統參數",
    "QUERYATTCHARTDEF": "計數型管制圖定義",
    "SHIFTEXCEPTIONTIMEDETAIL": "班別預設除外工時明細",
    "EQP MOUNT MATERIAL": "機台上料",
    "FROMPLACENO": "退料來源編號",
    "VISIBLEFIELD": "可檢視欄位",
    "DBSPLITQTY": "DB 分批數",
    "TOLERANCE": "公差",
    "FGD PRODUCT IN": "開立成品入庫單",
    "SETGROUP": "群組設定",
    "FETCHCARTON": "擷取大箱",
    "SHIPCUSTOMERNAME": "出貨至",
    "MONTHPRTCODEBASIS": "管制圖月報表編碼",
    "TABLERELATION": "Table Relation",
    "FETCHBOX": "擷取小箱",
    "PLANCLOSEDATE": "預計結案日",
    "EQPDAILYUTILIZATIONCHART": "每日設備稼動長條圖",
    "WP_ESOPLIST": "eSOP 文件清單",
    "REPAIRSTATENAME": "維修 狀態名稱",
    "QCCATEGORYDEF": "品管類別定義",
    "NEVER STOCKON": "未執行過上架作業，不需執行下架",
    "PMMODULE": "維修保養管理",
    "MOINFORMATION": "工單資訊",
    "INSPMACHINENO": "檢測機台編號",
    "MATERIALRETURNNO": "退料單編號",
    "WIPOSRETURNLOT": "外包回貨",
    "ACTMAINSN": "行動主次序",
    "EQP DAILY UTILIZATION CHART": "每日設備稼動長條圖",
    "WOBASIS": "工單資料",
    "MONTHVIEW": "月排程表",
    "NOT VALID LOTSTATE": "非有效的生產批狀態",
    "GUMMATERIALTYPE": "膠類物料管理類別",
    "AREACLASSSHOW": "區域分類",
    "DISABLED_COMPONENTNO": "停用",
    "USERAGENTCURDEF": "代理現況查詢定義",
    "FINVENTORYNO": "成品庫房編號",
    "ONLYHOLDLOT": "異常生產批",
    "RUNFREQUENT": "執行頻率",
    "QC SPEC BASIS": "品管項目規格",
    "RETURNOPNO": "回指定站",
    "RETURNLINE": "回到線上",
    "RETURNDATE": "退料日期",
    "RETURNDATA": "回報資料",
    "RETURN_QTY": "驗退數量",
    "NOT ALLOW TO VERSION": "不允許進版",
    "PLZCHECKLOGOFF": "請再次確認是否Logoff",
    "RETURNTYPE": "回原流程型態",
    "ACCESSORYSTATELOGDEF": "配件歷史資料查詢定義",
    "ERPQCFORM": "ERP 檢驗單",
    "EMAIL ADDRESS MUST CONTAIN THE SYMBOL @ AND CANNOT APPEAR AT THE BEGINNING": "電子郵件必須有＠符號",
    "DETAIL SOURCE": "明細來源",
    "PM MAINTENANCE QUERY": "設備保養計畫查詢",
    "ISSUEWEB": "簽核網頁",
    "ISSUELOG": "簽核記錄查詢",
    "ISSUEJOB": "簽核工作定義",
    "ISSUE NO": "簽核編號",
    "INVMATERIALWIPRETURNDETAIL": "退料單(WIP)明細",
    "SETPHASE": "設定階段",
    "MULTIOPERATORMODE": "多人加工模式",
    "NEWPHASEQTY": "分段數",
    "ORGSCRAPQTY": "原始損壞數",
    "NODESUBSYSFLOWDEF": "程序流程主檔",
    "NEXT_BOXQTY": "下一個PCS屬於Carton內的第幾個Box",
    "GROUP PRIVILEGE": "群組權限設定",
    "WINFRAME": "Win Frame",
    "BREAKDOWN_REPAIRQUERY": "故障維修登錄查詢",
    "CLEARCACHE": "清除程式暫存",
    "GETEQUIPMENTNO": "...",
    "EX_MATERIALLOT3": "EX_MATERIALLOT3",
    "EX_MATERIALLOT2": "EX_MATERIALLOT2",
    "EX_MATERIALLOT1": "EX_MATERIALLOT1",
    "OPPROPERTY": "作業站屬性",
    "CARRIERSPLIT_COMP": "載具分批元件Slot配置設定",
    "CANCELDESIREAGENT": "取消特定代理人",
    "QUESTIONDESC": "問題說明",
    "RAWWAFERBASIS": "基板物料",
    "DATASOURCE_C": "資料來源",
    "ATTACHFILE_ENSHOW": "英文表單附件",
    "PLANTYPESHOW": "計劃類別",
    "EQPCHECKQCLIST": "設備線上點檢",
    "ACCESSORY MANAGEMENT": "配件管理",
    "CHART ALL CAPABILITY": "製程能力報表",
    "ACCESSORYMASKGROUPBASIS": "光罩群組",
    "COLUMNNAME": "欄位名稱",
    "ORGTOTALQTY1": "調整前總數",
    "IMMEDIATEHOLDSET_BATCHDEF": "批次立即異常設定定義",
    "MO SEMI/WIP INV": "物料/半成品工單",
    "EQUIPMENTSTATELOGTOPTENBARCHARTLABEL": "前十項設備狀態記錄長條圖(標籤)",
    "THENCOULDBEATEMPLATE": "才可作為樣板",
    "CIEMPLOYEENO": "員工編號",
    "MATERIALVENDORCONTACTORDATA": "物料供應商聯絡人資料",
    "SYSMODE": "系統模式",
    "MAXVALUE": "最大值",
    "SYSOSNO": "System Os No",
    "WLD1MAX": "最大波長",
    "WLD1MIN": "最小波長",
    "WESTELECT008": "連續七點向上或向下趨勢",
    "WESTELECT003": "五點中四點超出一個標準差",
    "WESTELECT002": "三點中兩點超過兩個標準差",
    "WESTELECT001": "超過管制界限",
    "WESTELECT007": "連續十四點與中心線上下交叉",
    "WESTELECT006": "連續十五點在一個標準差內",
    "WESTELECT005": "連續八點超出一個標準差",
    "WESTELECT004": "連續八點在中心線上方或下方",
    "RERUNDEFINE": "重新上線定義",
    "MAXTIME1": "最長時間",
    "PREPARENAME": "備料人員",
    "YOU CAN ONLY ENTER A FIXED TIME OR DYNAMIC CYCLE TIME": "只能輸入固定時間或動態週期時間",
    "BINSTATEADJUST": "Bin分佈調整",
    "FGDINVENTORY": "成品庫",
    "PACKINGLEVEL": "包裝階層",
    "ARE YOU SURE TO APPROVE": "您確定要核准",
    "PRDIMAGE": "圖片",
    "OVERSEAYES": "是",
    "SUMGOODQTY": "元件上良品數加總",
    "L5_SOPPATH": "第五層指導書路徑",
    "FROM VENDORNO": "From Vendor No",
    "THISPRODUCTISEMPTYNOW": "目前該產品的生產參數為空值",
    "MAXSERIALNO": "最大碼",
    "CAN NOT SELECT QCITEM WITH COMCOL": "不允許執行元件收集的品管項目",
    "CHANGEPASSWORDDEF": "變更密碼定義",
    "TO BRNO CANT BE EQUAL TO FROM BRNO": "開始與結束企業邏輯不可相同",
    "EX_LOTSTATE3": "EX_LOTSTATE3",
    "EX_LOTSTATE2": "EX_LOTSTATE2",
    "EX_LOTSTATE1": "EX_LOTSTATE1",
    "CAN NOT BE DECIMALS": "不能為小數",
    "CALCULATE": "計算",
    "PRDSUBOP": "作業工序",
    "INVMATERIALIN": "開立進料單",
    "NEXTGROUP": "下一處理群組",
    "EXPORTPROGRESS": "匯出進度",
    "CONT_MATERIAL_ADJUSTDEF": "生產批作業站用料紀錄調整定義",
    "EAPMETHOD": "EAP接口設定",
    "PRINTOUTONRUNCARD": "是否列印",
    "PASSWORDENCODE": "編解譯密碼",
    "RULEDEF": "法則設定",
    "RULESET": "Rule Set",
    "MAINTAINNAME": "維護方式名稱",
    "COUNTBYTIME": "計時",
    "RUNHOUR": "小時",
    "RUNNING": "執行中",
    "PARENTCOLUMN": "父階欄位",
    "ACTUALDISPATCHDATE": "設定的派工日期為",
    "RUNCARD": "流程卡",
    "RUNYEAR": "年",
    "RUNTIME": "作業時間",
    "RUNWEEK": "週",
    "SELECT AT LEAST ONE EVENT": "至少請選擇一則事件",
    "HOLDDESCRIPTON": "異常說明",
    "ARCHIVEDATABASE": "封存資料庫",
    "ACCESSORYBASIS": "配件基本資料",
    "EQUIPMENTSTATELOGQUERYDEF": "設備歷史資料查詢定義",
    "MUST CHOOSE ONE OF EQUIPMENTNO AND EQUIPMENTTYPE": "請擇一選擇設備編號或設備類別",
    "GROUPNODEID": "Group Node ID",
    "ERP RE TRANSACTION": "ERP資料重新接收",
    "USEDQTY": "已使用數量",
    "MTLSHOWPROP": "物料顯示屬性",
    "USER NO": "使用者編號",
    "MTLSHOWDATA": "物料顯示資料",
    "L3_NAME": "第三層名稱",
    "SPCOPPRIVILEGE": "SPC檢驗站權限",
    "2DBARCODE": "二維號碼",
    "ENDRETURNDATE": "到退料日期",
    "UNSETPHASE": "取消階段",
    "WP8DBASISFACTORY": "廠內8D矯正單",
    "USEREVENTLOG": "事件記錄",
    "DRAG A COLUMN HEADER HERE TO GROUP BY THAT COLUMN.": "將欄位名稱拖曳到此窗格建立群組",
    "SCLASSDATAIMPORT": "次分類資料匯入",
    "BASE CLASS": "基底類別",
    "SAMPLING PLAN PARAMETER": "抽樣計畫參數",
    "COLUMNWIDTH": "欄寬",
    "SUBSTITUTIONUSEDDETAIL": "已使用備品明細",
    "WO_CREATE": "工單新增",
    "ADJUSTACCOUNT": "調帳拋轉",
    "PRODUCTPACKINGACCESSORYCOPY": "產品包裝配件設定 - 複製至其他產品",
    "SAMEWORDS": "密碼同一字元可出現N次",
    "IS NOT AVAILABLE": "不可用",
    "BASIC_ECN": "基礎ECN",
    "BASICINFO": "基本資料",
    "STATEISOLATED": "State Isolated",
    "ONTIMEMOTOTAL": "準時開工單數",
    "MENUVIEW": "檢視",
    "MENUEDIT": "修改",
    "MENUITEM": "選單項目",
    "COLUMN_NAME": "欄位名稱",
    "LOTATTRIBADJUST": "調整",
    "ACCESSORYSTATE": "模治狀態查詢",
    "LOTQTYADJUSTSELECT": "生產批數量調整",
    "ACCESSORYSCRAP": "報廢作業",
    "ITEMPRDREASONDEF": "計數品管項目產品原因對應定義",
    "ITEMPRDREASONMAP": "計數品管項目產品原因對應",
    "INVMATERIALINDETAIL": "進料單明細",
    "ACC VIOLATIVE STATE SETTING": "配件狀態互斥設定",
    "EXECUTEPROGRESS": "執行進度",
    "DBENDTIME": "DB End Time",
    "SELPRODUCT": "已挑選產品",
    "UNDOMATERIALQTYLESSTHANZERO": "還原工單發料後數量小於零",
    "SPECLINETYPESHOW": "規格線類別",
    "QUERYLINEBARCHART": "彙整分析圖",
    "PRODUCT IN": "Product In",
    "PRODUCTNO1": "產品編號",
    "PRODUCTION": "生產",
    "PRODUCTBOM": "產品用料表",
    "PRODUCTCMG": "Product CMG",
    "PRODUCTCMH": "Product CMH",
    "PRODUCTSNO": "Product S No",
    "COLUMNCHART": "直條圖",
    "PROCESSRECORD": "處理記錄",
    "CONT_COMPMATERIAL_BYMATERIAL": "物料用於元件查詢",
    "FROMFINISH": "從完成日期",
    "CUSTTYPE": "客戶類型",
    "STATECOLORSHOW": "狀態顏色",
    "CUSTOMER": "客戶",
    "RATABPAGECONTROL10": "SEMI_Comp",
    "RATABPAGECONTROL11": "SEMI_BIN",
    "MUSTTOSELECTPRDPARAMTEMPLATEFIRST": "必須要先設定生產參數樣板",
    "FAILINVENTORYNO": "不良品庫",
    "ACCESSORYBASISDEF": "配件基本資料定義",
    "BILLBOARD OPOUTPUT SUMMARY TRENDCHART": "作業站時段產出_趨勢圖",
    "EXBELONGRO": "排除已歸屬訂單",
    "VF1FROM": "電壓-起",
    "VERSION": "版本",
    "REJ. QTY": "Rej. Qty",
    "REJ. LOT": "Rej. Lot",
    "YIELDREPORT": "產品作業站良率查詢",
    "RTORDER": "RT Order",
    "USERERRORLOG": "錯誤記錄",
    "OPERATOR CLOCKIN": "使用者登入作業(上工)",
    "SPC LRR AND PPM CHART": "SPC LRR And PPM Chart",
    "MEMBERNO": "成員編號",
    "LOCATION BASIS": "儲位主檔",
    "OPTYPEDATA": "作業站類別資料",
    "OPTYPEOPNO": "作業站類別/編號",
    "ARE YOU SURE TO EXCUTE ALL SELECTED RECORDS": "您確定要執行所有選擇的資料",
    "CAN NOT BE FOUND": "找不到",
    "REASONPRDSOPFILE": "品質原因產品指導書",
    "SELECTMONO": "選擇工單編號",
    "SELECTOPNO": "選擇作業站編號",
    "SELECTEDOP": "已選的作業站",
    "SELECTEDPS": "已選的區段",
    "SELECTFILE": "選擇檔案",
    "SELECTFLAG": "選取",
    "SELECTALL1": "全選",
    "REDTCONNECT": "重新連線",
    "EMSMODULE": "設備管理",
    "MATERIALLISTMATERIALTYPEDIFFERENT": "用料清單物料類別不一致",
    "SELECTTIME": "選取時間",
    "QC_RESULT": "判定結果",
    "CARRIERCATEGORY": "載具分類資料",
    "NOT BIND ANY COMPONENT,NO NEED TO CHANGE CARRIER": "未綁定任何元件，不需進行更換載具",
    "PREVENTIONITEM DATA ALREADY EXIST AND NOT ALLOW TO REVISE OR DELETE": "預防項目已有對應的追蹤紀錄",
    "MODULESEQUENCE": "模組順序",
    "MOMATERIALLIST": "工單用料清單",
    "RELEASERNAME": "結案人姓名",
    "PLZCHECKIN": "請先執行上工",
    "RELEASESTATE": "Release State",
    "DATAARCHIVERELATIONBASIS": "數據封存關連主檔",
    "CARTONQTY": "大箱裝箱數",
    "OPCONTROLRULE": "作業站法則設定",
    "ERP QC FORM": "ERP 檢驗單",
    "ERPT100SETTINGERROR": "找不到T100相關整合設定資訊或整合設定資訊有誤!",
    "L1_UNITNO": "第一層產出單位",
    "COMPONENTPROPERTYBASISDEF": "元件屬性設定定義",
    "QUEUEQTY": "等待數量",
    "INVSEMIOUT": "開立半成品出庫單",
    "RELEASEDESCRIPTION": "綜合描述",
    "CURRENCY": "收款幣別",
    "ACCESSORY CONFIGURATION": "配件配置",
    "LOTOPERATORCLOCKOUT": "使用者批次下工作業",
    "RPT_ON_CYCLETIMEDEF": "產品生產週期查詢定義",
    "MUST CHOOSE DESIRE DATA": "必須選擇所需資料",
    "LED_PAGEMAPQUERY": "成品Bin分佈表查詢",
    "EQPQCLISTLOG": "設備點檢歷程",
    "REPORT PRINCIPLE": "報表原則設定",
    "SERIAL SPLITLOT": "分批序號規則",
    "EQPDAILYUTILIZATIONCHARTDEF": "每日設備稼動長條圖定義",
    "CURSTAGE": "目前階段",
    "SETUP ATTRIB MUST DEFINE A DEFAULT VALUE": "設定屬性必需定義預設值",
    "CAPACITYCTRLSHOW": "是否管制容量",
    "DEPARTMENT BASIS": "部門基本資料",
    "ENABLEFACTOR": "顯示要因",
    "CUSTOMERWAFERNO": "來料刻號",
    "PROCESS TUNING": "流程調整",
    "REASONMAP": "對應設定",
    "REASONNO1": "原因編號",
    "REASONQTY": "原因數量",
    "8DEXECUTEVERIFICATION8D": "D6執行驗證",
    "OP FOR QC BASIS": "QC作業站",
    "CURTIMES": "目前使用次數",
    "SN_C_BACK": "大箱編碼後置字元",
    "PROCESSPROPERTYDEF": "流程屬性定義",
    "TOLOTSERIAL": "To Lot Serial",
    "ELEMENTSEQUENCE": "特性次序",
    "EPITAXYOP": "磊晶作業站",
    "PRODUCTOPAMEND": "產品作業站修正",
    "RULEKEYWORD": "法則結果關鍵字",
    "ERPDOCUMENTLOG": "ERP單據還原作業",
    "CURRENTHANDLE": "即時處置",
    "SERIALSPLITLOT": "分批序號規則",
    "REJECTED": "拒收",
    "REJECTQI": "檢驗單品管項目清單",
    "PDLINE BASIS": "生產線別基本資料",
    "ENABLEFILTER": "啟用篩選過濾",
    "ISSUEGROUPNAME": "簽核群組名稱",
    "IS DUPLICATE": "是重複的",
    "EXECUTEARCHIVE": "執行封存",
    "ALREADY PACK IN": "已包入",
    "NEXT_CARTONQTY": "下一個PCS屬於棧板內的第幾個Carton",
    "L1_NAME": "第一層名稱",
    "PRODUCTINTYPE": "入庫至",
    "LOCATORTYPESHOW": "貨架類型",
    "SUBCONTRACTOR CONFIG": "外包商資料設定",
    "SUBSTITUTIONUSEDDETAILDEF": "已使用備品明細定義",
    "IMPORT QCITEM ATTRIBUTES": "計數品管項目匯入",
    "PRD TYPE": "產品類別資料",
    "SCENARIOBASIS": "劇本設定",
    "XMLSTRING": "XML String",
    "EQUIPMENTSTATELOGTRENDCHART": "設備狀態記錄趨勢圖",
    "FGDINBASIS": "成品入庫單主檔資料",
    "RETICLESETLAYERDEF": "配件組層別定義",
    "SENDMAILTOHOLDDISPGROUP": "寄送郵件至異常處理群組",
    "ERPUSERNO": "ERP使用者名稱",
    "OUTSOURCINGFLAG": "外包控管",
    "WORKREPORTID": "報工單拋轉ID",
    "PRODPARAMTERMUSTSETUPFIRST": "生產參數設定必須先設定",
    "SERACH1": "Serach",
    "COUNTMETHOD": "計算方式",
    "SETUSER": "使用者設定",
    "SETTING": "設定",
    "SET OFF": "Not Use / Not Attach",
    "EQPSTOCKERBASISDEF": "貨架基本資料定義",
    "DAILYSTARTTIME": "每日起始時間",
    "WIP STAGE DAILY": "客戶產品作業站現況查詢",
    "CARRIERPOSITION": "載具位置",
    "EQP FAVORITE": "電腦-過帳設備設定",
    "TOTABLENAME": "To Table Name",
    "DATAARCHIVECONFIGDEF": "封存設定定義",
    "LOADMASKGROUP": "光罩群組",
    "INCOMINGQCFORMCOMPONENTDEF": "進料檢驗_元件定義",
    "PREORDER": "預訂",
    "SUBSTITUTIONUSEDETAILL": "使用備品",
    "ERFOBJECTNO": "異常標的編號",
    "UNLOADEQPACCESSORY": "下模作業",
    "PMESTDATE": "預估保養日期",
    "HOLDITEMSETTINGBASIS": "異常原因主檔",
    "EQPREALOUTPUT": "實際產出數(hour)",
    "QUERYLINEBARCHARTDEF": "彙整分析圖定義",
    "UNSELECT": "取消選取",
    "ACCUMULATEQTY": "累計數量",
    "PREVIOUS": "上一筆",
    "SEARCH3": "...",
    "SEARCH2": "...",
    "SEARCH1": "...",
    "SEARCH5": "...",
    "SEARCH4": "...",
    "OP BASIS": "作業站基本資料",
    "BR_LC_CI_EPITAXY": "企業邏輯 - 磊晶登入介面(Check In)",
    "MOWIPLIST": "序號查詢",
    "ACCESSORYMASKGROUPDETAIL": "光罩群組明細",
    "SECTION": "位置",
    "SECOND1": "秒",
    "SECOND2": "秒",
    "MCLASS BASIS": "主分類基本資料",
    "FGDIN_T100": "",
    "SN_B_BACK": "小箱編碼後置字元",
    "ISOLATED": "不計算",
    "CHARTTYPESHOW": "管制圖類別",
    "INSTRUCTIONBARCODE": "說明書條碼",
    "SURE2CONFIRM": "是否確定執行",
    "ITEMNO1": "項次",
    "ITEMNO2": "品號",
    "QAMEMBER": "驗證人",
    "SHOW EQP LOG BY STATE": "設備歷史資料查詢_狀態",
    "OPENLIMITTIME": "開封後有效時間",
    "MONITORTIMER": "監控時間間隔",
    "QCIMPORT_CLICK": "品管項目匯入",
    "ERPUNITNO": "ERP單位編號",
    "L4_NAME": "第四層名稱",
    "INVENTORY_FGDSTOCKIN_T100DEF": "入庫至T100 ERP定義",
    "SERIAL RULE HAS NOT BEEN ENABLED": "序號規則尚未設定或啟用",
    "REMOVEWODETAIL": "移除",
    "SILICONPART": "Silicon Part",
    "INSPTYPE_FAI OR  INSPTYPE_IPQC OR INSPTYPE_PQC MUST BE 1 WHERE INLINE SPC": "品管項目設為InLine時,SPC首件檢,SPC巡檢,SPC出站檢至少須有一項設定為1",
    "LOTDATADEFINE": "生產批資料定義",
    "ERP DID NOT RETURN THE JOINT PRODUCT INFORMATION": "ERP沒有回傳聯產品資訊!",
    "PLEASECHECKFAILMESSAGEATEAISYSTEM": "完整錯誤資訊請至中台「紀錄檢視」查看",
    "PHASE DEFINE": "階段定義",
    "EQPCAPBASISDEF": "設備能力項目設定定義",
    "DEPARTMENTBASISDEF": "部門基本資料定義",
    "INVWIPRETURNCONFIRM": "退料單確認(WIP)",
    "SEMIWIP": "半成品線邊倉",
    "SEMIOUT": "半成品出庫",
    "SEMIINV": "半成品庫",
    "SEMI IN": "開立半成品進料單",
    "CHECK SECURITYCODE FAIL": "檢查安全碼失敗",
    "ATTRIBSOURCESHOW": "特性來源",
    "SELECT1": "選取",
    "SELAREA": "已選作業站資源",
    "SELCOMP": "",
    "PARAMETERDETAIL": "參數明細",
    "SHOWBOUNDARY": "邊界",
    "AFFECTDATA": "影響資料",
    "USR_SYSFLOW": "使用者管理",
    "CORRECTACTIONALERT": "修正操作目前不支援欄位資料型態與長度的變更。",
    "MTL QCITEM": "物料品管項目設定",
    "DELOUTLINE": "刪除框線",
    "EQUIPMENTLOTSTATECO": "設備check Out",
    "EQUIPMENTLOTSTATECI": "設備check In",
    "ADDSLOTNO": "新增子批",
    "LEVELSIX": "第六層",
    "LEVELTWO": "第二層",
    "LEVELONE": "第一層",
    "LEVELMAX": "包裝階層數",
    "SHOW ISSUE STATUS": "簽核狀態",
    "WIP MATERIAL RETURN LOG": "退料單記錄(WIP)",
    "REVERSE LOT": "回復處理",
    "AUTORPTPARETO": "自動寄送柏拉圖報表",
    "CURDEPARTMENTNO": "處理部門",
    "OPPRIVILEGE": "作業站過帳權限",
    "SCLASSBASISDEF": "次分類基本資料定義",
    "COMBINEACCESSORYNO": "組合配件編號",
    "SPLIT COUNT": "分批數",
    "FIRSTPRODUCT": "First Product",
    "INVMATERIALRETURNLOGDEF": "退料單記錄定義",
    "CARRIERIN": "上載具",
    "CARRIERNO": "載具編號",
    "IDLESTATE": "閒置狀態",
    "INV ENGINEER GROUP": "庫房工程群組",
    "REVERSETYPE": "還原類型",
    "SPC ONLIE CONTROL TEST": "SPC 量測數據收集_計量連續",
    "MATERIALADJUSTNO": "庫存調整單編號",
    "AGENT USER": "代理人",
    "COMPONENTFROMINV": "元件來源_庫房",
    "EQUIPMENT": "設備",
    "SHIPPINGPRINT": "出貨單列印",
    "CUTINLOT": "插單生產批",
    "TIMEPERIOD": "時間間隔",
    "SHIPPING_DATE": "出貨日期",
    "FUTUREHOLDSETDEF": "預先異常設定定義",
    "EXPSTATUS": "Exp Status",
    "RPT_ON_REASONTOPTEN": "十大不良原因查詢",
    "QUERY PRD SPEC": "Query Product Spec",
    "REVERSE HISTORY": "回復處理",
    "ACCESSORYTYPEDEF": "配件類別資料定義",
    "SUBSYSFLOWSHOW": "繪製系統建模",
    "PASSWORDENCODEDEF": "編解譯密碼定義",
    "REPORTGROUPBASIS": "報表群組基本資料",
    "8DACTIONDETAILDATA": "行動對策明細資料",
    "EQPUNSELECT": "△",
    "EQP CONFIG": "設備設定",
    "USCRAPLCL": "U-Chart Scrap 管制下限",
    "USCRAPUCL": "U-Chart Scrap 管制上限",
    "L2_UNITNO": "第二層產出單位",
    "RAW_MATERIAL IN": "原物料-進料單",
    "PARAMETERNAME": "參數名稱",
    "PARAMETERDATA": "參數資料",
    "PARAMETERTYPE": "參數類別",
    "DATA ARCHIVE": "數據封存",
    "OQC FORM": "出貨檢驗單",
    "DECIMALTYPE": "進位方式",
    "USERAGENTNAME": "代理人姓名",
    "SESSIONID": "Session ID",
    "QC REASON PRD SOP FILE": "品質原因產品指導書",
    "USERAGENTSHOW": "代理人查詢",
    "CHECKOUTEMPLOYEE": "登出人員",
    "USER BASIS": "使用者基本资料",
    "ERFEQPRELEASEALWAYSFALSE": "ERF開立時，釋放設備選項是否一律預設在否",
    "EXECUTEFLAG_IPQC": "執行旗標",
    "PLEASE CHECK NODES TYPE": "請檢查節點類別",
    "INKBAKEPATTERNDEF": "INK Bake Pattern Define",
    "IMMEDIATEACTION8D": "D3即時行動",
    "EQPSTATECONTROLSET": "設備狀態控制設定",
    "RELEASED": "已下線",
    "RELEASER": "Releaser",
    "OPNODEGROUP": "作業站節點群組",
    "SEQUENCENO": "次序",
    "CAUSEANALYSIS8D": "D4原因分析",
    "VALIDVALUE": "有效資料",
    "CHART CAPABILITY": "全製程能力報表",
    "FGDSTOCKIN_WF_CANCEL": "取消入庫 WorkFlow ERP",
    "ACC STATE LOG QUERY": "配件歷史資料查詢",
    "QCDEFECTCODEBASISDEF": "缺點基本資料設定",
    "RELATION": "關係",
    "RELATIVE": "相對",
    "DELETE FAILED": "刪除失敗",
    "QUERYMNTHVARCHARTRPTBYFACTOR": "管制圖月報表_以要因查詢",
    "FAB CONFIG": "FAB 設定",
    "PLEASE DEFINE": "請定義",
    "UNSELREASONNO": "未選取",
    "WAFERRECEIVINGDEF_LED": "晶片收料登錄_LED",
    "BR_L_CO_PACKING_MOLINEDEF": "包裝作業定義",
    "TPRTPPROCESSCOST": "TipTop ERP 製程成本",
    "SHIPPINGLOTNO": "Shipping Lot No",
    "WIPCOMPTURNDETAIL": "轉庫明細資料",
    "AUTO SPLIT RULE": "自動分批規則",
    "IS EXIST IN": "存在於",
    "MTL VENDOR": "物料供應商基本資料",
    "SYS FLOW": "系統建模",
    "WIPOSUNRETURNDEF": "外包回貨定義",
    "WAITLOTMERGE_COMPONENT": "等待併批_元件",
    "SMD PDLINE BASIS": "生產線別基本資料",
    "MODULEVERSION1": "模組版次",
    "COMMITSHOW": "還原鎖定",
    "COMMITDESC": "還原鎖定說明",
    "CAN NOT INCLUDE": "不包含",
    "CARRIERSTATEDEF": "載具現況管理定義",
    "STDDEVWLD1": "標準差波長",
    "STDDEVLOP1": "標準差亮度",
    "PLEASE SELECT THAT LOTNO FIRST": "請先選擇該筆生產批",
    "AQL BASIS": "AQL",
    "SELECTTHEALERTEVENTANDCONDITIONS": "選擇警示事件與條件",
    "PACKLOTSELECT": "包裝前作業",
    "AUTORPTMNTHVARCHART": "計量型自動寄送報表",
    "ALERTTYPESHOW": "警示類別",
    "LB_SPLITBYRULE_FT IS NOT THE LASTEST BR IN THIS OP, NEW TYPE PRODUCT CHANGE IS NOT BE SUPPORTED": "LB_SPLITBYRULE_FT不是本站最後一個BR,不支援[新模式產品變更]",
    "ALLOWEXECUTELOT": "允許刷卡過帳",
    "ENERGYVALUELOG": "曝光能量紀錄",
    "ENERGYVALUEDEF": "曝光能量定義",
    "YEARTODATE": "年度至今",
    "REPAIRSTARTTIME": "維修開始時間",
    "SUBSTITUTESTDQTY": "替代料標準數量",
    "FILENAME": "檔案名稱",
    "FILESIZE": "檔案大小",
    "FILEPATH": "檔案路徑",
    "FILETYPE": "檔案類型",
    "ERP_WSURL": "ERP Web服務網址",
    "STARTCAPVALUE": "設備能力起始值",
    "LAST_CARTONNO": "最近一個裝箱之大箱編號",
    "WIPEQPLOCKEDLOT": "生產批過帳設備鎖定回復",
    "UNDORETURNMATERIAL2MOSUCCESS": "還原工單退料成功",
    "STATIONTYPE": "站別",
    "SCENARIO BASIS": "劇本設定",
    "WORKTIMEDEF": "廠區工作日曆定義",
    "WORKTIMELOG": "工作時間記錄",
    "PACKINGRULENO": "包裝規則編號",
    "UPPERCONTROL": "上限單邊管制",
    "PROGRAMS": "測試程式定義",
    "REMOVEQC": "移除項目",
    "EXECUTE LOT_MOTRANS": "生產批執行_工單移轉",
    "QAUSERNAME": "驗證人姓名",
    "ACCACCESSORYCATEGORY": "配件分類",
    "FORMTYPE": "單別",
    "MATERIAL PREORDER": "開立預訂單",
    "FORMCOPY": "(複製)",
    "FORMDESC": "表單說明",
    "FORMEDIT": "(修改)",
    "FORMNAME": "表單名稱",
    "PMPLANDETAIL": "保養計畫設定明細",
    "CGOODQTY": "良品數",
    "CONTAINAREANO": "Contain Area No",
    "PRODUCTIONSEGMENT": "生產區段資料",
    "ELEMENTDEF": "特性定義",
    "XLSBODY": "XLS Body",
    "TO MATERIALNO": "To Material No",
    "XLSFILE": "Excel檔案",
    "XLSNAME": "樣板名稱",
    "XLSTYPE": "樣板類型",
    "WFGP4_OQCOPNO": "WFGP3&GP4 OQC檢驗單開立_作業站設定",
    "SYSEMAIL": "電子郵件",
    "LOGINSERIAL": "登入序號",
    "FILTERBY": "篩選條件",
    "FILTER_B": "篩選條件",
    "FILTER_C": "篩選條件",
    "FILTER_G": "篩選條件",
    "PRODUCTLABELBASISDEF": "產品標籤對應設定定義",
    "PROPERTY": "屬性",
    "ORIGINALVALUE": "原始數據",
    "L2_NAME": "第二層名稱",
    "ACC REPAIR": "叫修作業",
    "TOEQUIPMENTNO": "目標設備編號",
    "ERP_ENTID": "企業編號",
    "AREASHIFTDEF": "區域班別定義",
    "GROUPPRIVILEGEDEF": "群組權限設定定義",
    "ISSTOCKIN2ERPNO": "否",
    "QC INSPECTION": "設備品檢管理設定",
    "QUALITYLOG": "品質記錄",
    "LOGINCOMMENT": "登入註記",
    "INV_WIPTURN": "在製品轉庫",
    "OPGROUPDETAIL": "作業站群組明細",
    "USERDEFINEDREPORT": "使用者自定義報表",
    "WP_8DDISPOSITIONDEF": "處置對策資料定義",
    "SDVALUE": "標準差值",
    "WLD1FROM": "波長-起",
    "SWRBASIS": "特殊需求維護",
    "NET FLOW CAN NOT HAVE MULTIPLE PRODUCTION SEGMENT": "網狀製程不支援多區段流程設定",
    "ERPQCFORMCANNOTDEL2": "ERP開立的單據不得刪除",
    "RECIPE MANAGEMENT": "生產參數管理",
    "LOGINSOURCE": "登入來源",
    "PRODUCTYIELDDEF": "產品良率查詢定義",
    "WESTELECTRULE": "西屋法則",
    "SEMIDETAIL_COMP": "在製品_元件明細",
    "INV INVENTORY BASIS": "工程群組主文件",
    "OPERATORLOGINEXCEPTIONDETAIL": "使用者除外工時明細",
    "CHGEQUIPMENTSTATE": "轉換狀態",
    "MODULEBASISDEF": "製程模組資料定義",
    "EQP CONSUME STATUS LOG": "機台耗品歷程",
    "DTCALENDAR": "部門行事曆",
    "VIETNAM": "越南文",
    "INPUTSTRING": "輸入字串",
    "MATERIALLEVELSHOW": "物料等級",
    "ACC BASIS": "配件基本資料",
    "PLEASE KEYIN": "請輸入",
    "PARENTAREATYPE": "主要區域類別",
    "MARKNAME": "標識名稱",
    "REPAIRQTY": "維修數量",
    "REPAIRDEF": "維修",
    "REPAIRACC": "維修",
    "LOTLOG_REPORT_FACTORYDEF": "生產批跨廠區歷程明細查詢定義",
    "LENGTH OVER": "長度超過",
    "GUIDELINE_2": "第二階",
    "GUIDELINE_1": "第一階",
    "EXPIREDDATE": "到期日",
    "EXPIREDATE2": "有效日期",
    "PLEASE INPUT QUERY CONDITION": "請輸入查詢條件",
    "REFERENCE LOT": "參考批",
    "REQUIREDATE": "Require Date",
    "AXIS SETTING": "座標設定",
    "EXCEED THE LIMIT OF FILE SIZE": "超過檔案大小上限",
    "OUTINVNO": "Out Inventory No",
    "ENG PROPERTY": "工程屬性",
    "PLEASE CHECK": "請檢查",
    "STOCKERHISTORY": "在製貨架歷程查詢",
    "OPNODEGROUPBASIS": "作業站節點群組主檔",
    "QUERYLRRANDPPMCHARTDEF": "拒收率/百萬不良數管制圖定義",
    "SPLITMERGE_DRAWDEF": "分併批歷程圖定義",
    "REVERSEHISTORY": "回復處理",
    "OPCURINPUTQTY": "此次投入數",
    "SUBCONTRACTORNAME": "外包商名稱",
    "SUBCONTRACTORDATA": "外包商資料",
    "GROUPLEADER": "群組領導人",
    "NOT ALLOW TO RE-CREATE ERF AT SPC MODULE": "不允許於SPC模組中重新建立異常單",
    "PHASEBASIS": "階段設定",
    "DOCSERIALNO": "文件序號",
    "MOTHERLOT": "母批",
    "QUERYCHARTSIGNBOARDDEF": "管制圖看板定義",
    "INVENTORY_SCRAPTURNERP_TPDEF": "原物料報廢至TipTop ERP定義",
    "OUTBOUND": "出庫計價",
    "PREVENTIONITEM": "預防項目",
    "NEWSERIALRULESPLITLOT": "自訂新分批編碼規則",
    "EQUIPMENTREPAIRBASISDEF": "維修原因主檔定義",
    "COMPONENTPROPERTY": "元件屬性",
    "L5_NAME": "第五層名稱",
    "USERAGENTDEL": "取消使用者代理人",
    "USERAGENTCUR": "代理現況查詢",
    "USERAGENTSET": "使用者代理人設定",
    "LOGINSTATE": "登入狀態",
    "IDLE FEED": "待料",
    "MATERIALOUTBASISDATA": "領料單主檔資料",
    "PRODUCTLABELBASIS": "產品標籤對應設定",
    "SUBSCRIPTION": "訂閱",
    "BRFINALQC": "企業邏輯 - 最終檢查",
    "BILLBOARD OPOUTPUT SUMMARY": "作業站時段產出看板",
    "ACC SCRAP": "報廢作業",
    "EQPSTOCKERBASIS": "貨架基本資料",
    "INVENTORYNO": "庫房編號",
    "INVMATERIALINDETAILDEF": "進料單明細定義",
    "MOSTARTSTATE": "開工狀況",
    "SHOWOCAPPROCESS": "OCAP流程現況資料",
    "QC REPAIR BASIS": "不良維修方式主檔",
    "SAVEALL": "全部儲存",
    "SAVEXML": "儲存XML",
    "SEMIOUTBASIS": "半成品出庫單主檔",
    "SUBSTITUTIONVENDOR": "備品供應商基本資料",
    "SELECTSEMIOUTDETAIL": "選擇半成品出庫明細",
    "FROMLOTQTY": "From 數量",
    "FINDNEXT": "找下一個",
    "IPQCDEF": "計數不良原因收集定義",
    "FINDWHAT": "搜尋目標",
    "_EMS_EQPCAPBASISDEF": "設備能力項目主檔定義",
    "QCMATERIALSPEC": "物料規格設定",
    "PMWO HISTORY": "保養工單歷史資料查詢",
    "QC ITEM FOR ATTRIBUTES": "計數檢驗",
    "MUST BE GREATER THAN OR EQUAL TO": "必須大於等於",
    "EQUIPMENTLOTDATA": "Equipment Lot Data",
    "WORKTIMETEMPDEF": "工作日曆樣版定義",
    "FINALBIN": "最終Bin分佈",
    "FINALQTY": "最後數量",
    "MTLIMPORT": "物料匯入",
    "SEMI_SEMI IN": "半成品-入庫單",
    "SPCONLINECONTROL": "SPC 量測數據收集",
    "EQP DAILY REPORT": "設備稼動查詢",
    "MODULE DEFINE": "模組定義",
    "PLEASE INPUT NUMBER LAGER THAN 0": "請輸入大於0的數字",
    "XLSSOURCEFILECONTROLDEF": "Excel匯出樣版定義",
    "RODETAILDEF": "訂單明細定義",
    "MOPRSTYPE": "工單製程別",
    "SUBSTITUTION BASIS": "備品基本資料",
    "MUST BE THE LAST DAY OF MONTH": "必須為一個月的最後一天",
    "NEWCARRIERTYPE": "新載具類別",
    "ENGINEER GROUP": "工程群組",
    "WRONGNUM": "禁止連續N次密碼輸入錯誤",
    "MAINTAINPLANSETUPDEF": "保養計畫設定定義",
    "L4_SOPPATH": "第四層指導書路徑",
    "PLEASE SET CLOSEDATA FIRST": "請先完成結案資料",
    "START DATE": "開始日期",
    "FINISHED": "已完成",
    "SAFEQTY": "安全存量",
    "COCREATEDATE": "登出建立日期",
    "CONNECTING OVER LIMITATION": "已達系統授權連線數量",
    "MSGPLATFORM": "訊息平台整合網址設定",
    "MTL DEFROST STATE": "Material Defrost State",
    "LOT MERGE_CARRIER": "併批處理_載具",
    "REDTCONNECTSETTING": "重新連線時間設定",
    "SIGMARANGE": "標準差範圍",
    "SUBSTITUTION GROUP": "備品群組資料",
    "ONLY SELECT BEFORE OP": "僅能選擇所在作業站支線以前之作業站",
    "HOTLOTSHOW": "緊急批",
    "EXPIRATIONDATE": "到期日",
    "ENDINVDATE": "到庫房確認日期",
    "PROCESSTYPEPROCESSNO": "流程類別流程編號",
    "TIMESTEPNO": "時段編號",
    "OTHERDETAIL": "其他明細",
    "OTHERQTY": "其他數量",
    "OTHERLOT": "其他生產批",
    "OPERATORWORKTIMELOG": "使用者工作時間記錄",
    "SPC_INFO_GET": "統計品管資訊取得",
    "PRODUCTOPDEAFULTDEF": "產品作業站預設定義",
    "PRODUCTLABELRULEMULTIDEF": "產品Multi標籤規則設定",
    "LOT HISTORY": "生產批歷程及現況查詢",
    "FROMOPNAME": "開始作業站名稱",
    "FACTORSHOWINRPT": "於報表呈現",
    "UNRELEASELOTQTY": "未下線數量",
    "CANCELAGENTSETTING": "取消代理人設定",
    "SERIALCODEPREVIEW": "序號樣本",
    "CURRENTCARRIERNO": "目前載具",
    "DAILYREPORT": "工單日報表",
    "LED PAGE SPLIT": "Page分頁",
    "ERFUNRELEASED": "未解除異常單",
    "ERRORMESSAGE": "錯誤訊息",
    "NOT A VALID BOOLEAN EXPRESSION": "不是可用的布林表達式(邏輯運算子、關係運算子不可為空)",
    "ERPWOWORKREPORTRECALRESOURCE": "MEStoERP生產報工是否需重匯機時、人時",
    "VAR_CHARTSIGNBOARD": "管制圖看板",
    "DETAILFIELD": "明細欄位",
    "EMS_EQP_CAPMAPPING": "設備能力設定",
    "NOT ALLOW TO CHANGE VERSION": "不予許改變版本",
    "TOLERANCEUNIT": "小時",
    "PRDOPCAPITEMDEF": "產品-設備能力項目",
    "ATT CHART": "計數型管制圖",
    "PRD QCRULE BASIS": "產品抽樣頻率規則",
    "INVMATERIALOUTDETAILDEF": "領料單明細定義",
    "TOLERANCYTIME": "寬限數量",
    "THE STRING LENGTH OF DEFAULT VALUE MUST LESS THAN MAX VALUE": "預設值之字串長度必須<=最大長度",
    "SELECTMATERIAL": "選取庫存物料",
    "SPCQCFORMDEF": "檢驗單_定義",
    "NOTEXECUTEOP": "不執行作業站",
    "ACCESSORYCATEGORYDEF": "配件分類資料定義",
    "EQPACCSTATEBASISDEF": "配件狀態設定定義",
    "WAFERPARAMETER": "Wafer參數",
    "QCATTRULEBASIS": "計數判別法則基本資料",
    "BYWAFERCOUNT": "依片數抽樣",
    "MEANVALUE": "平均值",
    "CURRENTCONNECTIONCOUNT": "目前連線數",
    "LOT PROPERTY DEFINE": "生產批屬性定義",
    "SNINPUT": "輸入編號",
    "DEFAULTPROCESS": "預設流程",
    "QC_CONTROL": "製程卡控",
    "SUBPROCESSSHOW": "子流程顯示",
    "ORIGINAL": "原始",
    "PACKAGETYPEDATA": "封裝型別",
    "ESTDONETIME": "預估完成時間",
    "LATESTLOTS": "顯示最近",
    "NET FLOW REMAIN CLEAR": "網狀製程殘餘量清除作業",
    "REVERSEDESCRIPTION": "還原原因",
    "LED PAGE MERGE": "Page併頁",
    "SHELFLIFE": "保存期限",
    "LOTOPERATORCLOCKINDEF": "使用者批次上工作業定義",
    "QCFACTORMAINTAINDEF": "要因資料維護定義",
    "MUST BE IN THE SAME MONTH": "必須為相同月份",
    "OLDADDRESS": "舊位址",
    "DIFFCOMPARE": "差異比對",
    "COMPUTER AREA": "過帳電腦之區域",
    "AUTORPTATTHISTORY": "自動寄送計數檢驗歷程報表",
    "STARTMONTH": "起始月份",
    "THE STATE OF ALL LOTS MUST SAME": "所有生產批狀態需相同",
    "SYS OBJECT FILE FORM": "系統物件對應表",
    "MATERIALLISTMATERIALNONODENOTFOUNDORVALUEISEMPTY": "找不到物料清單物料編號節點或物料編號為空",
    "LOTSPLIT_BINASSIGN": "分批-Bin分配",
    "ACC STOCKIN": "入庫作業",
    "FUTURE OS": "預先外包設定",
    "ERPWORKREPORT CANCEL": "取消報工單_TipTop",
    "SCLASSBASIS": "次分類基本資料",
    "RECIPETEMPNO": "Recipe 樣版編號",
    "STARTINDEX": "起始位置",
    "WIP TRANSACTION LOG": "WIP Transaction Log",
    "FREQUENCYBASISDEF": "頻率基本資料定義",
    "BUSINESSRULEBASISDEFINE": "企業邏輯定義",
    "SYNSELECTWAFER": "同步晶片",
    "MANAGECOMBINEACCESSORY": "管理組合配件",
    "PREVIOUS OPERATING STATION END TIME": "先前作業站結束時間",
    "ECNWIZARDDEF": "ECN設定精靈定義",
    "STARTTIME1": "開始生效時間",
    "SUBSTITUTIONQTY": "備品數量",
    "ENDCREATEDATE": "到建立日期",
    "SUM OF SPLITLOT IS NOT EQUAL CURQTY OF LOTNO": "生產批分批後的數量總和不等於目前生產批數量",
    "INV COUNT STATE": "盤點關/開帳",
    "ALLDECOMPOSE": "全部拆解",
    "SCRAP OPERATION DOES NOT ALLOW THE COMBINATION OF MOLD WITH EXIST MOLD FIXTURE": "報廢作業不允許組合配件內存在組成配件!",
    "EQPTOOLBASIS": "工具基本資料",
    "QCATTRULEMAPBASIS": "計數品管項目與判別法則對應",
    "PLEASE SELECT FROM RECIPE TEMPLATE OR ENGOP RECIPE": "請從參數範本或工程作業站選取",
    "NONE LINK TO END NODE": "找不到LINK到END Node",
    "IS NOT IN AREA": "不在此區域",
    "SCR INV": "報廢倉",
    "PARTIALMODE": "部分報工模式",
    "DESTDATABASESELECT": "選擇資料庫",
    "FROMNODEID": "FromNodeId",
    "FROMNODENO": "From Node No",
    "SPLIT && MERGE": "分併批處理",
    "QCSETTINGBYOBJECT_TIP04_RULE": "4. 請於選取品管項目後，勾選相關判別法則，點擊套用按鈕",
    "INV COUNT PRINT": "列印盤點清冊",
    "SCRAPNO": "報廢單號",
    "SCRAPIN": "不良品入庫",
    "QTYMINUS": "工單發料/退料數量為0或負數",
    "BILLBOARD_OPSTATESETUP": "看板設定",
    "SCRINNO": "不良品入庫單編號",
    "SCRIPT2": "描述語言",
    "SCRIPT1": "描述語言",
    "QTYLIMIT": "儲位限制批數",
    "UNSELAREA": "未選作業站資源",
    "CONSUMPTIONTOZERO": "是否耗用次數歸零",
    "T_05300800": "T_05300800",
    "GET ATTACH FILE": "取得附件",
    "WAITLOTSPLIT_COMPONENT": "等待分批_元件",
    "INSPMACHINEBASISDEF": "檢測機台基本資料定義",
    "LOTSTATE_WAITDEF": "等待生產批查詢定義",
    "TRANSFERABLE": "可轉換",
    "BULLETIN": "網頁佈告欄",
    "STOCKER HISTORY": "在製貨架歷程查詢",
    "SINVENTORYNO": "半成品庫房編號",
    "TRANSFERRING": "完工待移轉",
    "TRANSFERRATE": "轉換比率",
    "TRANSFERTYPE": "轉換方式",
    "WAFERRECEIVING_LED": "晶片收料_LED",
    "SERIALRULECONFIG": "序號規則設定",
    "ONLINECONTROLFACTOR": "線上管制要因",
    "PDEFECTCL": "P-Chart Defect 管制中心",
    "PDEFECTLS": "P-Chart Defect 規格下限",
    "PDEFECTUS": "P-Chart Defect 規格上限",
    "DEFAULTAREA": "預設區域",
    "DEFAULTSHOW": "預設值",
    "SCRAP TYPE": "報廢判斷方式",
    "BAKEPATTERN": "Bake Pattern",
    "GETUNITTYPE": "...",
    "AUTORUN CONFIG": "AutoRun設定",
    "L6_NAME": "第六層名稱",
    "WOFINISHED": "已結案工單",
    "AQLBASIS": "AQL",
    "EACH PS MUST BE SELECT A PROCESS": "每個區段必須選擇一個流程",
    "EXCEPTIONXML": "例外訊息XML",
    "EXCEPTIONFUN": "執行功能編號",
    "NOT SPECIFIED MATERIAL": "非指定用料",
    "OPRESOURCE": "作業站資源",
    "PREVLOTNO": "Prev Lot No",
    "INSPMACHINENAME": "檢測儀器名稱",
    "INSPMACHINETYPE": "檢測機台類別",
    "SYSPRIVILEGE": "系統功能權限",
    "ERF DISPOSITION": "異常單處置",
    "EQPTYPEACCTYPE": "設備對應配件類別",
    "WIP_SYSFLOW": "生產作業管理",
    "SELECTSUBFLOWASNODE": "程序流程",
    "MOMATERIALSTATEDEF": "工單存料現況定義",
    "ERRORITEMQTY": "Defect數量",
    "MATERIALHISTORY": "各站物料使用明細",
    "CUSTOMERNO1": "客戶編號",
    "ATTACHGRAPH": "附件圖表",
    "ISSUENO": "簽核編號",
    "PRECAUSION8D": "D7預防措施",
    "CANNOTREPEATEDEXECUTE": "不可重複執行",
    "EQPTYPEEQPNO": "設備類別設備編號",
    "ENT_SYSFLOW": "客戶管理",
    "NO_ADHESIVE": "No Adhesive",
    "CUSTOMERSHIPADDR": "客戶出貨地址資料",
    "MAINTAINITEMSETUP": "保養項目設定",
    "CAN NOT MODIFY THE CONFIRMED SPC INCOMING QC FROM": "檢驗單已確認無法修改",
    "ANSPARETOMORE": "柏拉圖要因",
    "NO DATA SELECTED": "無選取任何資料",
    "OPFORQCBASISDEF_SPK": "作業站主檔定義",
    "8DQUESTIONDATA": "問題描述資料",
    "POSITION COUNT MUST EQUAL TO SAMPLEPOINTNUM": "位置數目一定不等於抽樣點數",
    "SELECTFUNCTIONNOASNODE": "系統程序",
    "GENERAL": "一般",
    "BREAKDOWN END TIME": "故障結束時間",
    "ISSUEJOBDETAILDEF": "簽核工作明細定義",
    "PRODUCTOUTPUT_MONTH": "產品入庫月報明細查詢",
    "SCR_SCR IN": "報廢-入庫單",
    "GETPARTOFCHARACTER": "擷取部分字元",
    "SPC ERF UNRELEASED": "未解除異常單",
    "SERIALRULECONFIGDEF": "序號規則設定定義",
    "CYCLETIME": "生產週期",
    "ITEMSTATUS": "執行壯態",
    "CYCLENAME": "圈別名稱",
    "ATTACHPOINT": "Attach Point",
    "PRODUCTTYPEBASISDEF": "產品類別資料定義",
    "UNSELECTPRIVILEGE": "未選的權限",
    "IS NOT INTEGER": "不是整數",
    "GETRONO": "...",
    "SUM OF SPLITLOTQTY": "總分批量",
    "ISEMPTY": "不可為空",
    "GETFILE": "",
    "GETDATA": "擷取",
    "GETMONO": "...",
    "GETOPNO": "...",
    "LOT PROPERTY BASIS": "生產批屬性設定",
    "INSPMACHINEPARAMETERTYPE": "檢測儀器類別",
    "INSPMACHINEPARAMETERTEST": "品管項目檢測儀器對應模擬",
    "UNLOAD EQP ACCESSORY": "下模作業",
    "UNIT TYPE": "單位類別",
    "BYSAMPLEQTY": "指定抽樣",
    "REQUESTMSGQUEUE": "訊息佇列請求伺服器",
    "LOGINSTATEDATAEXIST": "有上工資料,不可刪除登錄資訊",
    "THE VALUE CAN NOT GET": "無法取得資料",
    "WIZARDTITLE": "標題",
    "MATERIALTYPEMATERIALNO": "物料類別/物料編號",
    "SET AGENT": "代理人",
    "PLEASE EXECUTE": "請執行",
    "L1DETAIL": "第一層包裝明細",
    "ATT_ONLINECONTROLCHART": "計數線上管制圖",
    "EQPDISPATCHLIST": "派工設備清單",
    "SYSTEMPRIVILEGE": "系統功能權限",
    "SCENARIONO": "劇本編號",
    "COMPONENT OF RMA": "退貨單元件",
    "SERIAL RULE BASIS": "序號規則",
    "IMPORT_QCITEM_ATTRIBUTESDEF": "計數品管項目匯入定義",
    "RETURNTYPESHOW": "回原流程型態",
    "CARRIERTYPEDEF": "載具類別資料定義",
    "UPDATEDBFLAG": "是否可能更動DB",
    "MUST BE GREATER THAN": "必須大於",
    "RECIPETEMPBASISDEF": "Recipe 樣版基本資料定義",
    "CHILDCOLUMN": "子階欄位",
    "PLANFINISHDATE_MO": "工單預計完工日",
    "BREAKDOWNCREATEDATE": "故障登錄日",
    "OP CONFIG": "作業站設定",
    "MTLMODULE": "物料資料",
    "ADDPROPERTY": "新增屬性",
    "FABPRSSTAGEBASISDEF": "製造層別設定定義",
    "PALLETQTY": "棧板裝箱數",
    "WIPOSCONFIRMDETAIL": "外包確認明細",
    "DATETIMEPERIOD": "時間週期",
    "INSPECTQTY": "檢驗數量",
    "INSPECTION": "巡檢",
    "SHOW EQP STATUS BY AREA": "設備狀態監控_區域",
    "SHOW EQP STATUS BY TYPE": "設備狀態監控_設備類別",
    "EX_LOTBASIS2": "EX_LOTBASIS2",
    "EX_LOTBASIS3": "EX_LOTBASIS3",
    "EX_LOTBASIS1": "EX_LOTBASIS1",
    "EXECUTE REVERSE": "執行復原",
    "AREAINVENTORYDEF": "區域庫房基本設定定義",
    "EXECUTE LOT_CELL": "生產批執行_電池",
    "EXECUTE LOT_COMP": "生產批執行_元件",
    "SMSTEST": "測試",
    "LABELMULTIITEM": "Multi 標籤項目",
    "LABELMULTIRULE": "Multi 標籤規則",
    "MO RESOURCE QUERY": "工單耗用資源檢視",
    "LOT PROPERTY ADJUST": "生產批屬性調整",
    "PACKINGLISTNO": "包裝清單編號",
    "PATTERNNO": "Pattern No",
    "SMTPSSL": "加密連線SSL",
    "FROMINVENTORYNO": "來源庫房編號",
    "CHARTCONTROLSHOW": "管制圖",
    "ADVANCED": "進階",
    "EQP ACC STATE LOG QUERY": "設備配件歷史資料查詢",
    "SETUPATTRIB": "設定特性",
    "ONLYONEMOTHERLOT": "子批僅有一批可以使用母批批號，請檢查批號資料",
    "HANDCARRYYES": "是",
    "ESSTOPPAGERULE": "禁止規則",
    "GENERATE": "產生",
    "GETCUSTOMER": "...",
    "RUNCARDPREVIEW": "Run Card Preview",
    "QUERYMNTHVARCHARTRPT": "管制圖月報表",
    "LOCATORMANAGEMENT_MOVE": "轉移",
    "SMALLER": "<",
    "INVSFINBASIS": "半成品入庫單",
    "EQUIPMENTLOTSTATEHOLD": "生產批立即異常設定",
    "QUERYCONTROLCHART": "管制圖分析",
    "INSP MACHINE TEST": "機台連線測試",
    "PRIVOPTIONYES": "是",
    "MO PROPERTY BASIS": "工單屬性設定",
    "LINEBASIS": "生產線別基本資料",
    "UNITCONVERSION": "單位轉換",
    "LOTBASISPROCESSDRAW": "生產批主檔流程定義",
    "SECURITY": "安全性",
    "EQPQCLISTSETUPDEF": "新增設備點檢設定",
    "BR_LP_CO_NETDEF": "網狀製程報工進站定義",
    "LOGICAL EXCUTION": "Logical Excution",
    "SCHEDULED": "已排程",
    "OCAP BASIS": "OCAP基本資料",
    "LATER THAN": "晚於",
    "DTMONITOR": "DT 監控器",
    "DOMESTIC_1": "內銷",
    "BREAKDOWN": "故障",
    "EQP ENGINEER GROUP": "設備工程群組資料",
    "ALL DATA WILL BE DIVIDED INTO 4 GROUPS": "數據將自動分為4組",
    "SCRAPSTATE": "報廢 模製具狀態",
    "INCOMINGQCFORMDEF": "進料檢驗單定義",
    "CAN NOT EXECUTED IMMEDIATE WAIT": "不可執行立即等待",
    "ERRORLOTNUM": "不良批數",
    "OPERATOREXCEPTIONTIMEDEF": "使用者除外工時定義",
    "PRODUCTMATERIALCOEXIST": "產品物料同時並存",
    "CAN NOT EXECUTED IMMEDIATE HOLD": "不可執行立即異常",
    "TABLEMAP": "資料表對應",
    "ECNSTEP2BTNNEXT": "下一步",
    "EMPLOYEENO": "員工編號",
    "MATERIALQTYINPUT": "輸入用料數量",
    "ENABLESWR_CICO": "特殊作業指示",
    "REPAIRRESULT": "Repair Result",
    "EQUIPMENTREPAIRBASIS": "維修原因主檔",
    "MATERIAL": "物料",
    "FTPROGRAMBIN": "測試程式 Bin",
    "QUERYATTCHART": "計數型管制圖",
    "8DCUSTOMER": "客戶8D單",
    "VNUMBER": "橫向儲位數",
    "OUTPUTSTRING": "輸出字串",
    "QCSPECSERIALNO": "品管項目規格序號",
    "MUST FILL UP ALL WORKING DAYS": "必須填完全部工作日",
    "WIPAREAOPERATORSTATE": "登錄現況",
    "OPAREAMAP": "作業站區域對應",
    "PREORDERNO": "預訂單編號",
    "PLEASE CHOOSE A DEFAULT AREA": "請選擇預設區域",
    "SECURITYCODE": "安全碼",
    "INVSEMIINDETAIL": "半成品進料單明細",
    "EQPIMPORT": "設備匯入",
    "BILLBOARD_OPSTATE_CHILDFORM": "作業站現況看板_詳細資料",
    "ALREADY ON THE CARRIER": "已在載具上",
    "CYCLE TIME": "生產週期",
    "RAWWAFERSELECT": "基板挑選",
    "COMBINEACCESSORYTYPE": "組合配件類別",
    "SPC DATA BY LOTNO": "Lot 檢測資料",
    "ISSUEJOBSTATEDETAIL": "簽核現況明細",
    "NEXTDISPGROUP": "選擇下一處理群組",
    "CREATORISSUEDEF": "送簽者資料查詢定義",
    "MTLINKLOTBASIS": "Material Ink Lot Basis",
    "PPSMODULE": "排程派工",
    "INVENTORY_WIPTURN": "在製品轉庫",
    "INSP MACHINE PARAMETER SETUP": "品管項目檢測儀器對應",
    "SUMMARYUSERNAME": "總結人員姓名",
    "UDEFECTLCL": "U-Chart Defect 管制下限",
    "UDEFECTUCL": "U-Chart Defect 管制上限",
    "RESOURCEQUERY_BYMODEF": "工單耗用資源檢視定義",
    "MODELETEDEF": "工單刪除定義",
    "LOTDISPTYPE": "處置類型",
    "8DBASISFACTORYDATA": "8D廠內單資料",
    "ASSIGNFACTORORDER": "指定因子順序",
    "NODEVERSION": "節點版本",
    "DATAEDITLOG": "資料修改記錄",
    "SCRIPT RESULT MISSING FIELD": "描述語言結果缺少欄位",
    "ARE YOU SURE TO REMOVE ALL SELECTED RECORDS": "您確定要移除所有選擇的資料",
    "BR_L_MERGE_GENDEF": "併批處理定義",
    "UNDORETURNMATERIAL2MOQTYEXCEEDED": "還原工單退料後數量大於原始發料數",
    "ATTACH FILE": "附件",
    "ECNSTEP2DESCRIPTION": "輸入ECM編號及選擇依產品或作業站取出特性資料",
    "INVENTORY NO": "庫房編號",
    "ACCESSORYCATEGORY": "配件分類資料",
    "LOTBASIS_EPITAXY": "生產批主檔_Epitaxy",
    "INVENTORYNO2": "庫房編號",
    "INVENTORYNO1": "庫房編號",
    "MAINTENANCEPLAN": "預防保養計畫",
    "ALERTEVENTLOGDEF": "查詢警示觸發記錄定義",
    "MAINTENANCETYPE": "預防保養維護方式設定",
    "MAINTENANCEITEM": "預防保養項目資料",
    "SOPFILE": "指導路徑與檔名",
    "SOPPATH": "指導書路徑",
    "WEIGHTRATE": "權重率",
    "MONTHTODATE": "本月至今",
    "ATT-CHART": "計數型管制圖",
    "EQPCONSUMERESET": "機台耗品更換",
    "BONUSCOMPDEF": "Bonus 元件",
    "LOTISSPLITED": "此生產批已進行分批，不允許刪除",
    "PRODUCTRECIPEDEF": "產品參數定義",
    "INVMATERIALINDETAILDATA": "進料單明細資料",
    "PRDIMPORT": "產品匯入",
    "NO EQUIPMENT": "沒有設備",
    "QC ITEM_VDELETE": "",
    "FREIGHTTERMS": "運費條件",
    "SUBSTITUTIONBASISDEF": "備品基本資料定義",
    "MODIFFDAY2": "預計完工與實際完工差異天數",
    "MODIFFDAY1": "預計生產與實際生產差異天數",
    "NOEQPTOUSE": "批號上沒有設備可使用",
    "CONTINUELOTCOUNT": "連續加工批數",
    "ARE YOU SURE TO APPLY THE QCITEM FROM THIS PRODUCTNO": "是否套用此產品編號至品管項目",
    "NOT SUPPORT": "不支援",
    "QUALITY": "品質",
    "BR_LB_COEQC_GEN": "企業邏輯-電信(EQC)抽樣規則登出_等級",
    "QTYCONVERSION": "數量轉換設定",
    "RPTDATABASETYPE": "資料庫類型",
    "USRMODULE": "使用者管理",
    "IMMEDIATEHOLDSET_BATCHBASIS": "批次立即異常設定主檔",
    "QUERYBY": "查詢鍵",
    "THIS RECORD IS TEMPORARY": "CAN NOT CHECK OUT",
    "UNIONPRODUCTUNIT": "聯產品單位",
    "OLDVERSION": "舊版本",
    "ERP RETURN MESSAGE": "ERP訊息回覆",
    "CANTNOTSEND": "無法傳遞",
    "SYSPARAMETERBASISDEF": "系統參數定義",
    "UNITBASIS": "單位設定",
    "ERPQCFORMCANNOTDEL": "若為ERP開立的檢驗單，刪除後回到未確認狀態!",
    "MUST BE NUMERIC": "須為數值",
    "SAMPLINGPARAMETERDATA": "抽樣計劃參數資料",
    "FROMREVERSEID": "From Reverse ID",
    "OVERSEAFLAG": "海外",
    "SPCONLINECONTROLDEF": "SPC 量測數據收集定義",
    "COMPONENT ATTRIB": "元件特性",
    "PLEASE LET THE COUNT OF SELECTED DATA TO BE LESS THAN": "所選擇資料數量請小於",
    "INSPDESCRIPTION": "檢驗註記",
    "ATTACHNAME": "附件名稱",
    "ATTACHFILE": "附件",
    "ATTACHBODY": "附件",
    "ATTACHTYPE": "附件類型",
    "INVENTORY_WIP_RAWDEF": "在製品庫_物料調帳",
    "JUMPMODULE": "跳模組(Module)",
    "WORELEASED": "已下線工單",
    "SAMPLINGPARAMETERDEF": "抽樣計劃參數定義",
    "-": "-",
    "\u0012": "流程編號",
    "I": "",
    "Q": "\"",
    "P": "%",
    "Y": "Y",
    "X": "量測值X位置",
    "EQPTYPECUNSUMBASIS": "設備耗品主檔",
    "USERGROUPDEF": "使用者群組定義",
    "SELECTEDPARAMETER": "已選參數",
    "STANDARD_MONO": "標準",
    "ISSTOCKIN2ERP": "入庫是否拋ERP",
    "PRDRECIPEDETAILDEF": "參數群組明細定義",
    "SUBSTITUTION VENDOR": "備品供應商基本資料",
    "SN_B_FRONT": "小箱編碼前置字元",
    "EN": "英文",
    "EX": "Ex (../WEB**/****.aspx)",
    "D1": "建立團隊",
    "AT": "於",
    "D3": "即時行動",
    "D2": "問題描述",
    "D5": "處置對策",
    "D4": "原因分析",
    "D7": "預防措施",
    "D6": "執行與驗証",
    "D8": "總結",
    "DT": "資料收集器",
    "GO": "續Go",
    "BE": "被",
    "BR": "企業邏輯",
    "C0": "0",
    "MO": "工單",
    "CC": "附件收件人",
    "CL": "管制中心",
    "CS": "規格中心值",
    "CP": "CP",
    "NO": "否",
    "NA": "",
    "NG": "NG",
    "ND": "結束",
    "IN": "屬於",
    "ID": "ID",
    "IF": "IF",
    "IS": "是",
    "LS": "規格下限",
    "OK": "確定",
    "OE": "下單模組",
    "OR": "或",
    "OS": "外包作業",
    "OP": "作業站",
    "JA": "日文",
    "JP": "日文",
    "UP": "上",
    "US": "規格上限",
    "HV": "HV",
    "KO": "韓文",
    "KM": "KM",
    "VI": "越南文",
    "VH": "VH",
    "QC": "品質管理",
    "TH": "泰文",
    "TO": "至",
    "WO": "工單",
    "RT": "重測",
    "RO": "訂單",
    "PP": "PP",
    "PM": "設備保養",
    "ISSUEJOBDETAILDRAW": "畫簽核工作明細圖",
    "SELECTEDABNORMAL": "已選擇之不良現象",
    "UNITPRICE": "單價",
    "ISSUEJOBMAPDETAIL": "簽核流程對應明細",
    "8D BASIS_FACTORY": "廠內 8D 矯正單",
    "STDQUEUETIME": "標準等待時間",
    "SETBACKGROUND": "設定背景",
    "PRODUCEDHOURS": "已生產時數",
    "TOTAL SCRAP REASONN QTY": "報廢原因總數量",
    "RESOURCE-DIFFERENT BETWEEN STD REAL": "資源-標準與實際差異",
    "MASK GROUP": "光罩群組",
    "FINISHEDDATE": "完成時間",
    "AUTOSPLITRULE": "自動分批規則",
    "SATURDAY": "星期六",
    "BROKERNO": "報關行",
    "TOUNFROZEN": "未簽核",
    "EQPMAINTENANCEPLANHISTORYDEF": "保養計劃歷史資料查詢定義",
    "PASSWORD IS INVALID": "密碼錯誤",
    "MOPROPERTYBASIS": "工單屬性設定",
    "MESPARAMETERDATA": "MES參數資料",
    "MOPROPERTY": "工單屬性",
    "INVENGINEERGROUPBASIS": "庫房工程群組主檔",
    "DEFAULTEMPLOYEENO1": "計畫檢驗員1",
    "DEFAULTEMPLOYEENO3": "計畫檢驗員3",
    "DEFAULTEMPLOYEENO2": "計畫檢驗員2",
    "PLEASE SELECT": "請選擇",
    "ERRORREPORTNAME": "錯誤報表名稱",
    "INVPRODUCTINLOGDEF": "半成入庫單記錄定義",
    "CAN NOT BE THE SAME": "不能相同",
    "INCOMINGDEF": "收料資料",
    "INCOMINGKEY": "收料Key",
    "RELATIONERPNO": "ERP關聯單號",
    "MATERIALNO": "物料編號",
    "MATERIALIN": "進料",
    "MOPROPERTYERROR": "工單屬性錯誤",
    "LOCKEQUIPMENT": "變更機台狀態",
    "IMMEDIATEHANDLINGNO": "即時處置編號",
    "SEMIOUTDETAIL": "半成品出庫單明細",
    "SYSPARAMETERBASIS": "系統參數",
    "HOLDDISPOSITIONGROUPBASIS": "異常處理群組主檔",
    "EQP QCLIST": "設備點檢表設定",
    "CONTORLCHART": "管制圖",
    "EQUIPMENTFAVORITE": "過帳設備設定",
    "PALLETLABEL": "棧板標籤",
    "MOMATERIALLISTDEF": "工單用料清單定義",
    "SLOT_ID": "Slot ID",
    "OPERATORCLOCKIN": "使用者登入作業(上工)",
    "STDWORKTIMEQTY": "工時基準數量",
    "BUSINESSRULE": "企業邏輯",
    "ALREADY COMPLETE PACKING": "CANNOT EXECUTE PACKING",
    "EQPMATERIALSTATEDEF": "設備上料現況查詢定義",
    "SHOWPROPERTY1": "顯示屬性",
    "ERPQCITEMNO": "ERP 檢驗代號",
    "BR_LC_CO_EPITAXY": "企業邏輯 - 磊晶生產登錄介面(Check Out)",
    "CHECKINEMPLOYEE": "登入人員",
    "GROUPDETAIL": "群組明細",
    "INVWIPRETURNCONFIRMDEF": "退料單確認(WIP)定義",
    "GROUPDEATIL": "群組明細",
    "GROUPDEFINE": "群組定義",
    "SLENGNO": "SL Eng No",
    "OCAPBASIS": "OCAP基本資料",
    "EQP COMP CYCLE BASIS": "設備圈別資料",
    "PMCYCLE_W": "保養週期(萬次)",
    "CAN NOT FIND THE FILES TO UPDATE": "找不到更新的檔案",
    "MANUALGOOPTION": "手動續Go選項",
    "OCAPFINAL": "最終處置",
    "PRIORITY": "優先權",
    "WP8DCLOSEDEF": "結案資料定義",
    "INVCOUNTCONFIRM": "盤點確認",
    "PACK AND INV": "包裝 & 庫房",
    "LASTLOTDATE": "末批時間",
    "SEMIINDETAIL": "半成品入庫單明細資料",
    "GSPCSERIAL": "Gspc Serial",
    "PACKTYPESHOW": "包裝類型",
    "SAMPLERULEDEF_WAFER": "抽樣規則定義_晶圓",
    "CONFIGFILE": "設定檔",
    "FQCFORMNO": "終檢檢驗單編號",
    "FORMATVALUE": "有效小數位數：",
    "UNDOADDMATERIAL2MOSUCCESS": "還原工單發料成功",
    "PRODUCTIONSEGMENTDEF": "生產區段資料定義",
    "CUSTOMERSHIPADDRESS": "客戶出貨地址",
    "CUSTOMERSHIPADDRDEF": "客戶出貨地址資料定義",
    "USERAGENTSETDEF": "使用者代理人設定定義",
    "AREAPRIVILEGE": "區域過帳權限",
    "SHEETTYPE": "單別",
    "CHECKIN_CARRIER": "載具進站",
    "MORELEASEDEFINE": "工單下線定義",
    "PRODUCT IN LOG": "Product In Log",
    "FTPROGRAMSWBINIMPORT": "Bin別匯入",
    "ITEMSPEC": "項目規格",
    "ITEMTYPE": "品號類別",
    "BR_L_MERGE_GEN": "併批處理",
    "SHOW GROUP USER": "顯示群組使用者",
    "ITEMINFO": "項目資訊",
    "ITEMNAME": "項目名稱",
    "DISPATCHSTATEADJUST": "派工調整",
    "REASON SUBTYPE BASIS": "品質原因子類別資料",
    "CONFIRMALL": "全部確認",
    "CONFIRMLOT": "確認",
    "BILLBOARD OPOUTPUT SUMMARY GAUGE": "作業站時段產出_良率儀表板",
    "PRIVTYPE": "Priv Type",
    "PRIVNAME": "權限名稱",
    "LOT HISTORY DETAIL": "生產批歷程明細查詢",
    "CHARTLINEEDITLOG": "管制線修改紀錄",
    "MONOHAVEMATERIALINMATERIALSTATE": "工單已發料",
    "MATERIALVENDORMAPDEF": "物料供應商對應定義",
    "SHOW APPLICANT": "送簽者資料查詢",
    "SAVETEMP": "暫存",
    "USERGROUPSHOW": "顯示群組使用者",
    "TOTAL DEFECT REASON QTY": "缺點原因總數量",
    "GETRIGHTPARTOFCHARACTER": "從右側擷取部分字元",
    "INVENTORYBASISDEF": "庫房基本資料定義",
    "QRSNO HAS BEEN CLOSED": "此矯正單已結案",
    "PDLINEPOSITION": "工位",
    "INPUTUNITNO": "輸入單位編號",
    "KEYVALUE TEXT": "量測值",
    "SIGNOUT": "登出",
    "NEWTOTALQTY": "調整後總數",
    "WAITLOTSPLIT_BIN": "等待分批_等級",
    "BREAKDOWNNAME": "故障名稱",
    "BREAKDOWNDATA": "故障資料",
    "LIGHTLAMP": "燈號",
    "SERIALBASIS_PS": "包裝編號主檔",
    "BREAKDOWNTIME": "叫修時間",
    "INSPDEFINE": "Insp Define",
    "CHOOSE MORE THAN ONE PROCESS": "選擇超出一條流程",
    "INVCOUNTSTATEPRINT": "列印盤點清冊",
    "STARTPOSITION": "開始位置",
    "EQPEQUIPMENTQCLISTNO": "Equipment QC List No",
    "REPAIRUSERNO": "維修人編號",
    "ECNCONTROL": "ECN管制",
    "LABELNO": "標籤編號",
    "ECNSTEP5DESCRIPTION": "因子影響的生產批",
    "BILLBOARD_OPSTATE": "作業站現況看板",
    "EQPOEESUMMARYDEF": "整體設備效率(OEE)定義",
    "RO PROPERTY": "訂單屬性",
    "SQTYCANBBIGGERTHENPQTY": "抽樣數是否可大於母體數",
    "REPAIRS": "重複使用次數",
    "REPAYBY": "回報人",
    "REPRINT": "列印",
    "QUERYCHARTALLCAPABILITYDEF": "製程能力報表定義",
    "REQUERY": "重新查詢",
    "RESITEM": "RES Item",
    "LOTISVALIDSHOW": "批號有效性",
    "DETAILDEL": "明細刪除(&D)",
    "DETAILADD": "明細新增(&A)",
    "RESULT1": "結果",
    "RESTYPE": "資源類別",
    "RESTORE": "恢復",
    "LAYERNO": "層次",
    "PRODUCTTYPEBASIS_SPK": "產品類別",
    "CHANGEDAREANO": "變更區域編號",
    "RETICLE": "Reticle",
    "OUTSOURCING_BACK_PROCESS": "外包回貨設定作業",
    "CLIENTENDTIME": "Client End Time",
    "EAPMETHODDEF": "EAP 接口資訊設定",
    "REVERSE": "還原",
    "REVISOR": "修改人",
    "REVISER": "修改人",
    "RRORLEVEL": "Rror Level",
    "OCAPPROCESSDRAW": "OCAP 流程繪圖",
    "DISABLECHART": "不顯示圖表",
    "COUNTEQPUNITQTY": "機時單位批量",
    "EXCLUDETESTING": "排除測試",
    "QCITEMREASONMAP": "品管項目原因對應",
    "PRDESOPBASISINFO": "產品-eSOP設定維護",
    "BR_L_CIBATCH_MULTIUSER": "企業邏輯 - 多人加工批次登入介面(Check In)",
    "NONE SELECTED A LOT TO DO LOT SPLITING": "未選取任一筆生產批進行分批",
    "CDEFECTUS": "C-Chart Defect 規格上限",
    "CDEFECTCL": "C-Chart Defect 管制中心",
    "CDEFECTLS": "C-Chart Defect 規格下限",
    "PACKINGLISTBASIS": "包裝清單主檔",
    "PLEASESELMPLAN": "請選取保養計劃",
    "PLEASE SELECT INCLUDE MOTHER LOT NO": "請選擇母批批號",
    "LEDPROGRAMBIN": "LED BIN內容定義",
    "RRECEIVE": "接收",
    "DATASELECT": "選擇性資料複製",
    "OPOUTPUTSUMMARYGAUGE": "作業站時段產出儀表板",
    "EXE_OPERATOR LOGIN_LOT": "請使用 使用者多人加工登錄_生產批 功能!",
    "DATASOURCE": "資料來源",
    "HURRYTIME": "催簽時間",
    "INSPDRIVER": "檢測機台連線程式",
    "EQPMODULE": "設備資料",
    "SENDMESSAGE": "訊息發送",
    "RECEIVE": "接收",
    "SERIALRULEDETAIL": "序號規則明細",
    "INSPECTIONSTANDARDS": "檢查標準",
    "RECOUNT": "重新計算",
    "STANDARD_ERFNO": "標準",
    "REFRESH": "重新整理",
    "REFOPNO": "參考作業站編號",
    "ACC SCRAP REASON BASIS": "配件不良原因基本資料",
    "WIP STATE": "產品作業站現況查詢",
    "HOLD/WAIT": "異常 && 等待",
    "QCITEM PRD REASON MAP": "計數品管項目產品原因對應設定",
    "FROMQUERYDATE": "起始時間",
    "SUBCONTRACTOR BASIS": "外包商基本資料",
    "IS NOT FOUND AT": "未找到在",
    "EQUIPMENTCLEARALL": "設備清機",
    "FIXED-QUANTITY": "Fixed Quantity",
    "ERPWORKRPT_EQPSUMMARY": "報工單拋轉設備彙整資料",
    "PRODUCTSPECDEF": "Product Spec Def",
    "EXECUTEFLAG_FAI": "執行旗標",
    "RELEASE": "下線",
    "START NODE CAN NOT BE TO NODE": "START Node只可有OutLink",
    "EQUIPMENTLOTSTATEDETAIL02": "設備可加工之生產批",
    "EQUIPMENTLOTSTATEDETAIL03": "生產批明細",
    "EQUIPMENTLOTSTATEDETAIL01": "設備上貨區狀態",
    "ACTIONDETAIL NOT HAVE BEEN VERIFIED YET！": "仍有明細對策尚未完成驗證",
    "REMOVE1": "移除",
    "ENABLECHART": "顯示圖表",
    "EQPPROPERTY": "設備屬性",
    "QTYTYPE": "數量型態",
    "COUNTSERIAL": "盤點序號",
    "STANDARD_LOTNO": "標準",
    "COMBINE ACCESSORY TYPE": "組合配件類別",
    "PRDMODULE": "產品資料",
    "SCRINBASISDEF": "不良品入庫單主檔定義",
    "RPTCHARTCAPABILITY": "全製程能力報表",
    "UNITDATA": "單位資料",
    "RECIPEDETAILDEF": "設備參數明細定義",
    "CURRENT LOT STATUS CAN NOT ALLOW TO EXECUTE LOT SPLIT": "目前生產批狀態不允許執行元件分批",
    "UNITTYPE": "單位類別",
    "QTY IS NOT EQUAL TOTAL COUNT OF COMPONENT": "數量不等於元件總數",
    "CUSTOMERBASIS": "客戶基本資料",
    "SYS FUNCTION CONTROL": "表單控制項設定",
    "PLOT_WAIT_PROCESS": "生產批暫停處理",
    "CUSTOMERENAME": "客戶英文名稱",
    "INSURANCECOVERAGE": "保險(Insurance Coverage)",
    "ENABLE FIXED COLUMN": "Enable Fixed Column",
    "BRPRODTYPE": "生產型態",
    "BONDFLAG": "是否保稅",
    "GETWAFER": "擷取",
    "INPUTABORTLOG": "作廢原因登錄",
    "PROCESSDATAIMPORT": "流程資料匯入",
    "REPORTCATCHTABLE": "快取資料表",
    "EQP REPORT": "設備相關報表",
    "APSFIXEQPTIME": "APS固定機時(單位:秒)",
    "SELECTNODEID": "選取節點序號",
    "CUSTOMERLOTNO": "客戶批號",
    "GET ALL DATA": "擷取全部",
    "LOGINPLACENO": "登入地點",
    "CHANGEPASSWORDFORM": "變更密碼",
    "ERPLANGUAGE": "ERP語系",
    "LOT OPERATOR CLOCKOUT": "使用者批次下工作業",
    "ERPORGANIZATION": "企業編號",
    "LOGINBR": "企業邏輯登入",
    "LOGINOP": "登入作業站",
    "AUTORPTXLSSOURCEFILECONTROL": "自動寄送報表匯出樣板",
    "CUSTOMERSNAME": "客戶簡稱",
    "CUSTOMERNO_MO": "工單客戶編號",
    "LABELPRINTDEF": "標籤列印定義",
    "AS ATTRIBVALUE": "為特性值",
    "SCRAP COMPONENT LOT": "損壞元件生產批",
    "TOREVERSEID": "To Reverse Id",
    "LOCATOR": "儲位",
    "GRAPHLINK": "圖檔連結",
    "GRAPHNAME": "圖檔名稱",
    "ORGMOSTATENOTEXIST": "工單原始狀態不存在",
    "CHILDAREANO": "子項區域編號",
    "ORIENTATION": "切角",
    "UNIONERF": "共同開立異常單",
    "TRANSFERFACTORY": "換廠作業",
    "RATABCONTROL1": "",
    "HISTORY2": "歷程",
    "BONUSQTY": "Bonus 數量",
    "ACCESSORYSTATESHOW": "配件狀態",
    "LOGINSTARTDATE": "登入起始日期",
    "ACCESSORYSTATENAME": "模製具狀態名稱",
    "GETDATA2": "擷取",
    "GETDATA1": "擷取",
    "VAR_ONLINECONTROLCHART": "計量線上管制圖",
    "FTPFILEPATH": "FTP檔案目錄",
    "MAXBINQTY": "最大Bin數",
    "INVMATERIALADJUSTBASIS": "庫存調整單主檔",
    "UPLOADATTACHFILE": "上傳附件",
    "USERDEFINEDREPORTDEF": "使用者定義報表定義",
    "PRDRECIPEDEF": "產品參數群組定義",
    "UNIT BASIS": "單位設定",
    "LOGCREATEDATE": "記錄建立日期",
    "PRDDEFECTLOGDEF": "Product Defect Log Def",
    "COMDEFAULTVALUESELECT": "生產批特性-預設值選取",
    "MATERIAL QUERY BY MATERIAL": "物料用於生產批查詢",
    "ARE YOU SURE TO CLOSE ALL SELECTED RECORDS": "您確定要結案所有選擇的資料",
    "EQPPROPERTYDEF": "設備屬性定義",
    "LOSSQTY": "遺失數",
    "LOTTYPE": "生產批類型",
    "LOTUNIT": "批",
    "FINALGROUPDEF": "最後處理群組定義",
    "LOTDATA": "計量品管項目",
    "LOTNO_G": "批號",
    "LOTNO_B": "批號",
    "LOTNO_C": "批號",
    "LOTINSP": "每批檢",
    "LOTINFO": "生產批資訊",
    "IPQCFORM": "PQC 檢驗單",
    "RPT_ON_RODETAIL": "補料分析表",
    "HOLDDISPGROUPBASISDEF": "異常處理群組定義",
    "QCSPECBASIS": "品管項目規格",
    "CURGROUPNO": "處理群組",
    "LOP1MIN": "最小亮度",
    "LOP1MAX": "最大亮度",
    "IMPORTNO": "匯入編號",
    "INSPMECHINE TYPE": "檢測設備類別",
    "PASSWORD SETTING ERROR": "密碼設定錯誤",
    "PRS TYPE": "流程類別資料",
    "SHPDATE": "出貨日期",
    "EXCEL_REMIND_3": "Oracle DB 無法透過匯入器匯入有3個以上作業站的流程",
    "EXCEL_REMIND_2": "匯入前請關閉檔案，否則會讀取失敗",
    "EXCEL_REMIND_1": "流程資料匯入器僅支援線性流程",
    "VALUETYPE": "有效性檢查",
    "VALUERANK": "等級",
    "UNFROZEN": "未簽核",
    "LOT OP CONT ATTRIB ADJUST": "生產批作業站製程特性值調整",
    "REPOT TYPE": "Repot Type",
    "SHOWENG": "顯示工程資訊",
    "SHOWERF": "顯示異常單資訊",
    "SHOWALL": "顯示全部",
    "SHOWLOG": "顯示日誌",
    "SHOWMSG": "顯示訊息",
    "SHOWQTY": "顯示總產出數",
    "LINEBASISDEF": "生產線別基本資料定義",
    "INVENTORY_FGDSTOCKIN_E10ICD_CANCEL": "取消入庫 E10ICD ERP",
    "SCRAP_REASON": "損壞原因",
    "SHOW LOADPORT STATE": "Show Load Port State",
    "CLOSEDESCRIPTION": "結案說明",
    "PRODUCT PROCESS": "產品流程",
    "SHIPQTY": "出貨數量",
    "FIRSTDEPARTMENT": "第一處理單位",
    "REASONBASISDEF": "品質原因基本資料定義",
    "REASONBASIS_8D": "8D 原因基本資料",
    "SHIFTNO": "班別編號",
    "FGDSTOCKIN_E10ICD": "入庫至E10ICD ERP",
    "QCCHARTRULE": "品管管制圖法則",
    "SUBSTITUTEMATERIAL": "替代料",
    "FIXEDQTYWORKORDER": "定量保養工單",
    "QCCHARTCOPY": "管制圖全部複製",
    "ERPWORKREPORT CANCEL_E10ICD": "取消報工單_E10ICD",
    "USERDEFINE": "使用者自訂",
    "EDITISSUE": "編輯簽核流程",
    "OCAPVERSION": "版本",
    "RCVUSERNO": "回貨人員",
    "PRODUCTQCITEMIMPORT": "產品品管項目匯入",
    "INSPMACHINEPARAMETERSETUP": "品管項目檢測儀器對應",
    "POSITIONNO": "工位編號",
    "ROSTATESHOW": "狀態",
    "QCITEMDELETEFORVARIABLESDEF": "刪除計量型品管項目量測記錄定義",
    "EXTERNALFAILUREMEMO": "外部成本註記",
    "EXTERNALFAILURECOST": "外部失敗成本(E)",
    "CURRENT STATUS": "目前狀態",
    "WAITDISPOSITION": "等待處置",
    "SUBACTION": "明細對策",
    "RULEMETHOD": "法則方法",
    "BILLBOARD_OPSTATE_PRDTYPEDEF": "作業站現況看板_產品類別定義",
    "QRSTYPE": "8D單類型",
    "QUERYCHARTYMWCAPABILITY": "區間製程能力報表",
    "ECN": "工程變更",
    "EL1": "",
    "EMS": "設備監控",
    "ENG": "工程資料",
    "END": "End",
    "ENT": "企業模組",
    "EQP": "設備",
    "EQC": "電信(EQC)",
    "ERP": "拋轉ERP",
    "ERF": "異常單",
    "ETH": "ETH",
    "E10": "E10",
    "FAX": "傳真",
    "FGD": "成品",
    "FNO": "製令號碼",
    "ADD": "新增(&A)",
    "AND": "And",
    "ALL": "全部",
    "D10": "D10",
    "AT1": "在",
    "AUT": "自動執行",
    "D01": "D01",
    "D03": "D03",
    "D02": "D02",
    "D05": "D05",
    "D04": "D04",
    "D07": "D07",
    "D06": "D06",
    "D09": "D09",
    "D08": "D08",
    "AQL": "AQL",
    "APS": "APS",
    "DAY": "日",
    "DEF": "預設",
    "DEL": "刪除(&D)",
    "GET": "...",
    "GLS": "GLS",
    "GUS": "GUS",
    "GUM": "固晶膠",
    "BOM": "用料表",
    "BOX": "小箱",
    "BIN": "Bin",
    "MIN": "分鐘",
    "MAX": "Max",
    "MEN": "人員",
    "MES": "MES",
    "MTL": "物料",
    "CAN": "可以",
    "COA": "出貨報告",
    "CHT": "繁中",
    "CHS": "簡中",
    "CUT": "剪下",
    "CPK": "CPK",
    "NO1": "否",
    "NO2": "否",
    "NOT": "Not",
    "NOW": "現在時間",
    "NEW": "新編",
    "NUM": "個數",
    "INS": "Ins",
    "INV": "庫存模組",
    "IEW": "預警管理",
    "IQC": "IQC",
    "IR1": "逆向電流",
    "ISU": "簽核管理",
    "LOT": "生產批",
    "LED": "LED",
    "LCL": "管制下限",
    "LRR": "拒收率",
    "N/A": "N/A",
    "OEE": "整體設備效率",
    "OR1": "Or",
    "OP2": "-",
    "OP3": "*",
    "OP1": "+",
    "OP4": "/",
    "OP5": "^",
    "OQC": "出貨檢驗單",
    "OUT": "出庫",
    "UP1": "上",
    "USE": "使用",
    "USR": "使用者管理",
    "UCL": "管制上限",
    "HMI": "HMI",
    "H24": "(24)",
    "HVH": "HVH",
    "KOR": "韓文",
    "KEY": "鍵值",
    "KPI": "績效指標",
    "VZ1": "逆向電壓",
    "VF1": "電壓",
    "VHV": "VHV",
    "QTY": "數量",
    "TEL": "電話",
    "TO2": "至",
    "TO1": "至",
    "TOP": "上",
    "WWW": "WWW",
    "WIP": "在製品",
    "RWK": "全層重測(RWK)",
    "RPT": "報表模組",
    "RAW": "原料",
    "RMA": "退貨",
    "PPM": "百萬不良數",
    "PPK": "PPK",
    "PRD": "產品模組",
    "PRS": "流程模組",
    "SUB": "遞迴檢查子目錄",
    "SUM": "Sum",
    "SWR": "特殊需求",
    "SQM": "SQM",
    "SPC": "統計品管",
    "SPK": "艾碼SPC系統",
    "SYS": "系統模組",
    "SFT": "SFT",
    "SEQ": "序號",
    "SET": "設定",
    "SEC": "秒",
    "SEL": "選取",
    "SNO": "S No",
    "SCR": "不良品庫",
    "SMS": "簡訊",
    "SMD": "廠區規劃",
    "SLR": "單層重測(SLR)",
    "SHP": "出貨模組",
    "YES": "是",
    "XTH": "第",
    "PRODUCTPACKINGSERIALRULEDEF": "包裝編號設定",
    "REPAIRITEMNO": "維修項目編號",
    "MATERIALGROUPBASISDEF": "物料群組主檔定義",
    "8DEXECUTEVERIFICATION": "執行驗證",
    "OPCOPYOPDATABASIS": "作業站資料複製",
    "LOT SERIAL": "生產批序號",
    "STATE NO": "狀態編號",
    "EARLY": "提前",
    "LOT CHOICE EQP": "生產批選用生產設備",
    "ECNNO": "ECN 編號",
    "EDATA": "資料",
    "EDIT1": "修改(&E)",
    "EDIT3": "修改(&E)",
    "EDIT2": "修改(&E)",
    "EDIT5": "修改",
    "EDIT4": "修改(&E)",
    "EDIT7": "修改",
    "EDIT6": "修改",
    "EMAIL": "電子郵件",
    "EMPTY": "",
    "ENGNO": "工程編號",
    "ENDTO": "終點位置",
    "EQPNO": "設備編號",
    "EQPON": "稼動",
    "EQUAL": "=",
    "ERPNO": "ERP單號",
    "ERROR": "不良原因",
    "ERFNO": "異常單編號",
    "EVERY": "每",
    "DTCONECTQTY": "可上線人數",
    "EXCEL": "Excel",
    "QCATTRIBUTE": "計數",
    "MUST BE PERCENT NUMERIC VALUE": "需為數值百分比型態",
    "SILICONSUPPLIER": "Silicon Supplier",
    "ERRORACTION": "處理方式",
    "CONT_MATERIAL_BYLOT": "生產批使用物料查詢",
    "FABCODE": "FAB 編號",
    "FAXNO": "傳真",
    "FGDIN": "成品入庫",
    "FIELD": "欄位",
    "FIRST": "First",
    "FORMS": "",
    "SURE TO DELETE": "確定要刪除",
    "FROM2": "從",
    "FROM1": "從",
    "FT_RT": "重測",
    "ADDOP": "新增作業站",
    "ADDQC": "加入項目",
    "ADD_P": "新增(&A)",
    "ADD_L": "新增(&A)",
    "ADD_C": "新增(&A)",
    "ADD_B": "新增(&A)",
    "ADD_G": "新增(&A)",
    "ABORT": "中止",
    "AGAIN": "再一次",
    "AGENT": "代理人",
    "AMEND": "修正",
    "FACTORY": "工廠",
    "ALERT": "警示",
    "EQPCAPITEM": "設備能力",
    "ARMAP": "不良現象維修對應",
    "APPLY": "套用",
    "DADD3": "新增",
    "DAYS1": "天",
    "DEDIT": "修改(&E)",
    "DELAY": "延遲",
    "DELOP": "刪除作業站",
    "DEL_P": "刪除(&D)",
    "DEL_G": "刪除(&D)",
    "DEL_C": "刪除(&D)",
    "DEL_B": "刪除(&D)",
    "DEL_L": "刪除(&D)",
    "DDEL3": "刪除",
    "DCOPY": "複製",
    "DOING": "加工中",
    "DOWN1": "下",
    "GET12": "...",
    "GET13": "...",
    "GET10": "...",
    "GET11": "...",
    "GET14": "...",
    "GET15": "...",
    "GRRNO": "GR&R單編號",
    "GRAPH": "圖形",
    "GRADE": "等級",
    "GREEN": "綠",
    "GROUP": "群組",
    "BACK2": "上一層",
    "BACK1": "上一頁",
    "BATCH": "批次",
    "BASIS": "主檔",
    "BONUS": "Bonus",
    "BOXNO": "箱號",
    "BINNO": "Bin 編號",
    "BINRT": "Bin 重測",
    "BRSPC": "SPC品管項目挑選_出站檢驗",
    "BYLOT": "依批數",
    "BYAQL": "AQL抽樣",
    "BYBIN": "依Bin分批",
    "MIN03": "(分鐘)",
    "MIN02": "(分鐘)",
    "MIN01": "(分鐘)",
    "MATCH": "符合條件",
    "MO NO": "工單編號",
    "MODEL": "模型",
    "MONO1": "工單編號",
    "MONTH": "月",
    "MOVE4": "<<",
    "MOVE5": ">>",
    "MOVE6": "<<",
    "MOVE1": ">>",
    "MOVE2": "<<",
    "MOVE3": ">>",
    "MOVES": "稼動",
    "MOIQC": "工單IQC",
    "MOQTY": "工單數量",
    "MOPNO": "作業站編號",
    "MEANX": "x軸平均值",
    "MEANY": "y軸平均值",
    "MESNO": "MES單號",
    "MESIP": "IP位置",
    "MESID": "識別碼",
    "MERGE": "併批",
    "SEARCHVENDORNO": "尋找供應商編號",
    "SELECTWIPINVLOT": "入庫資料含有",
    "MPLAN": "保養計劃",
    "PACKINGDETAIL": "包裝明細",
    "MTLNO": "Material No",
    "RALABEL1": "Ralabel",
    "PLEASESELECTONECONDITION": "請選擇一個條件",
    "FAILBIN": "無效等級",
    "FAILQTY": "不良數",
    "ISSUEGROUPMASTERDATA": "簽核群組主檔資料",
    "CATCH": "快取",
    "CAPON": "開啟能力",
    "COMMA": "",
    "COLOR": "顏色",
    "COPY1": "複製(&C)",
    "COPY2": "複製(&C)",
    "COPY3": "複製(&C)",
    "COPY4": "複製(&C)",
    "COPY5": "複製(&C)",
    "COPY6": "複製(&C)",
    "COUNT": "計算",
    "CLOSE": "關閉",
    "CLEAR": "清除",
    "CHECK": "設定檢查",
    "CHAR5": "碼",
    "CHAR4": "碼",
    "CHAR1": "碼",
    "CHAR3": "碼",
    "CHAR2": "碼",
    "CHART": "圖表",
    "CUTIN": "插單",
    "T_08001010": "T_08001010",
    "CPASS": "判定",
    "RANKDETAIL": "等級明細",
    "NODES": "節點",
    "NEXT2": "下一步",
    "NEXT1": "下一頁",
    "ACCTYPEIMPORT": "配件類別匯入",
    "NDEND": "Nd End",
    "INFO2": "資訊",
    "INFO1": "資訊",
    "ININV": "In Inventory",
    "INPUT": "輸入",
    "INVQC": "生產入庫檢驗單",
    "INXML": "傳入XML",
    "OPERATORNAME": "作業人員名稱",
    "IDPSW": "密碼不可與帳號相同",
    "ATTLOTDATA": "計數品管項目",
    "PMMAINTENANCEPLANQUERYDEF": "設備保養計畫查詢定義",
    "LIKE8": "%",
    "LIKE9": "%",
    "LIKE6": "%",
    "LIKE7": "%",
    "LIKE4": "%",
    "LIKE5": "%",
    "LIKE2": "%",
    "LIKE3": "%",
    "LIKE1": "%",
    "LINE2": "",
    "LINE1": "",
    "LIMIT": "限制",
    "ISSUE": "簽核",
    "LABEL": "標籤",
    "LAYER": "層次",
    "LOGIN": "登入",
    "LOGID": "記錄編號",
    "LOTNO": "批號",
    "LEFTB": "(",
    "LEVEL": "等級",
    "ONLY2": "只能",
    "OBIN8": "Org Bin 8",
    "OBIN7": "Org Bin 7",
    "OBIN6": "Org Bin 6",
    "OBIN5": "Org Bin 5",
    "OBIN4": "Org Bin 4",
    "OBIN3": "Org Bin 3",
    "OBIN2": "Org Bin 2",
    "OBIN1": "Org Bin 1",
    "OBJNO": "Obj No",
    "GREATER": ">",
    "LOT STATUS": "生產批狀態",
    "ORDER": "次序",
    "OP NO": "作業站編號",
    "OS NO": "外包單編號",
    "OSQTY": "外包數量",
    "OSEND": "已回貨",
    "OSBIN": "OSBin",
    "OPNO3": "作業站編號",
    "OPNO2": "作業站編號",
    "OPNO1": "作業站編號",
    "OPNO5": "作業站編號",
    "OPNO4": "作業站編號",
    "OPEQP": "作業站設備",
    "OUTER": "託外",
    "OTHER": "其它",
    "NOT APPROVED": "未簽核",
    "JOBNO": "工作編號",
    "SCHEDULESETDEF": "排程設定定義",
    "BINBASISDEF": "Bin 基本資料定義",
    "JUDGE": "判定",
    "LENGTHM": "總長",
    "LENGTH1": "長度",
    "IMPORT_QCITEM_ATTRIBUTES": "計數品管項目匯入",
    "UDAQL": "自定義AQL",
    "UNSEL": "未選",
    "HOUR1": "小時",
    "HOURS": "小時",
    "HUMAN": "人員",
    "STATECONFIRM": "狀態確認",
    "DETERMINE": "判定",
    "DELETE SELECTED ROWS": "刪除選定的資料行",
    "IN MODULE": "在模組中",
    "KEYIN": "輸入",
    "VALUE": "值",
    "VALID": "有效性",
    "VF1TO": "電壓-迄",
    "VIEW2": "檢視",
    "QUEUE": "待進站",
    "QUERY": "查詢",
    "QRSNO": "8D單號",
    "QBANK": "Q Bank",
    "QCNUM": "抽樣批數",
    "ARE YOU SURE TO DELETE ALL SELECTED RECORDS": "您確定要刪除所有選擇的資料",
    "TRACK": "追蹤維護",
    "TABLE": "資料表",
    "TAGID": "Tag ID",
    "PROCESS BASIS": "流程基本資料",
    "TEST1": "測試",
    "TELNO": "電話",
    "TITLE": "職稱",
    "TITEL": "標題",
    "TILDE": "~",
    "TIMES": "次數",
    "THICK": "厚度",
    "TOTAL": "合計",
    "TOP 5": "Top 5",
    "TOOLS": "工具",
    "TODAY": "今天",
    "TESTTYPE": "Test Type",
    "WBANK": "W Bank",
    "SUBSTITUTEMATERIALNO": "替代料編號",
    "WIPOS": "外包單開立",
    "WIDTH": "寬度",
    "TESTDATA": "測試資料",
    "TESTINFO": "測試資訊",
    "RUNNO": "Run No",
    "RTBIN": "重測 Bin",
    "RERUN": "重新上線",
    "RESET": "重設",
    "REFRO": "參考訂單",
    "RATIO": "Ratio",
    "RANK3": "等級3數量",
    "RANK2": "等級2數量",
    "RANK1": "等級1數量",
    "RANK4": "等級4數量",
    "RANGE": "範圍",
    "RCVNO": "Rcv No",
    "RMANO": "退貨單號",
    "RONO1": "訂單編號",
    "RIGHT": "右",
    "CHECKRANKFORWARD": "與前批等級比對",
    "OPERRORQTYINPUT": "OP Error Qty Input",
    "PS NO": "區段編號",
    "PSNO1": "區段編號",
    "PRINT": "列印",
    "PRICE": "價格",
    "PASTE": "貼上",
    "PAGE1": "頁",
    "PLUS1": "+",
    "PLATO": "柏拉圖",
    "PLANE": "Plane",
    "PCSNO": "成品序號",
    "PM WO": "保養工單",
    "PIQTY": "PI數量",
    "PIECE": "片",
    "PHASE": "階段",
    "POINT": "點",
    "SUBOP": "作業工序",
    "SWBIN": "SW Bin",
    "SWRNO": "特殊需求編號",
    "STAGE": "製造層別",
    "START": "開始",
    "STATE": "狀態",
    "STEP6": "步驟六",
    "STEP5": "步驟五",
    "STEP4": "步驟四",
    "STEP3": "步驟三",
    "STEP2": "步驟二",
    "STEP1": "步驟一",
    "STOP1": "停止",
    "STOP2": "停止",
    "SSLNO": "否",
    "SSIZE": "製造層別基本資料",
    "SSONO": "銷貨單編號",
    "SPCID": "管制圖",
    "SPLIT": "分批",
    "SEQNO": "次序",
    "SETUP": "設定",
    "SEL_B": "選取",
    "SEL_C": "選取",
    "SEL_G": "選取",
    "SEND2": "拋轉",
    "SAVE1": "儲存",
    "SCRAP": "損壞",
    "SCRIN": "不良品入庫",
    "SCLOT": "批",
    "SOPNO": "標準程序號碼",
    "SLOPE": "斜率",
    "SIGMA": "標準差",
    "SHOW4": "",
    "SHOW2": "",
    "SHOW3": "",
    "SHOW1": "",
    "SHIFT": "班別",
    "INVMATERIALADJUSTCONFIRM": "庫存調整單確認",
    "EQP_RESVALUE": "機時(分鐘)",
    "GROUPNO": "群組編號",
    "GROUPOR": "Or 群組",
    "GROUPID": "Group ID",
    "SPLITRULE": "分批規則",
    "SPLITTYPE": "分批方式",
    "ERRORDETAIL": "不良明細",
    "SPLIT_LOT": "分批處理",
    "SPLIT_BIN": "分批處理",
    "YIFEI": "YIFEI",
    "YIELD": "良率",
    "SPLITFLAG": "分箱",
    "SPLITLOT1": "子批1批號",
    "SPLITLOT2": "子批2批號",
    "SPLITLINE": "分隔線",
    "UNITNODIFFERENT": "單位不一致",
    "TURNTOERPSTATE": "拋轉狀態",
    "RAW INV": "原物料倉",
    "GOODBIN": "Good Bin",
    "GOODQTY": "良品數",
    "WP_8DQADEF": "執行驗證資料定義",
    "STD_PALLETQTY": "棧板滿箱數設定",
    "XXBAR": "XX Bar",
    "CUR_LOTQTY": "生產批數量",
    "COLLECTTYPE": "收集類別",
    "XLSNO": "樣板編號",
    "RAWDATA": "原始數據",
    "WIP OS LOT RETURN": "外包生產批回貨",
    "EQPRECIPEBASIS": "設備參數資料",
    "EQPACCSTATEBASIS": "配件狀態設定",
    "PRODUCTRECIPE": "產品參數",
    "ACTIONRESULT": "行動結果",
    "MSAGROUPUSERSETTING": "量測系統分析群組人員設定",
    "PMEXECUTOR": "設備保養回報人",
    "PREORDERBASISDATA": "預訂單主檔資料",
    "WIPSTATEREPORTDETAIL": "產品作業站現況明細",
    "MANUFACTUREDATE": "製造日期",
    "FIXEDDAYTYPE": "頻率類別",
    "HOSTADDRESS": "HOST 位址",
    "EQPACCSTATECONTROLSETDEF": "配件狀態控制設定定義",
    "NEWADDRESS": "新位址",
    "COMPONENT PROPERTYNO": "元件屬性編號",
    "EQPCHECKRATE": "點檢頻率",
    "OUTSOURCING_PURCHASE_STOCKIN_CREATE": "外包回貨",
    "PARITIALLOTANDNOTPARTIALLOTCANNOTEXECUTEWAITDISPASITIONTOGETHER": "不可同時處理PARTIAL LOT與非PARTIAL LOT項目",
    "TOLERANCEQTY": "寬限數量",
    "SUBSTITUTIONVENCONTACTORDEF": "備品供應商聯絡人定義",
    "PLEASE ADD PRODUCT OP PARAMETER": "請加入產品作業站參數",
    "SELECTED MATERIALNO COUNTS EXCEED LIMIT": "所選擇物料編號數量超過限制",
    "MAIN MENU": "主選單",
    "8DCLOSEDATA": "結案資料",
    "MCLASSDATAIMPORT": "主分類資料匯入",
    "ALARMMAILYES": "是",
    "INVSEMIINLOGDEF": "半成品進料單紀錄定義",
    "EQUIPMENTGROUPDEF": "設備群組資料定義",
    "NONE SELECTED A COMPONENT TO DO LOT SPLITING": "未選取任一筆元件進行分批",
    "CONTINUOUSPRODUCTIONLINE": "連續性生產線",
    "RESETOPENDATE": "下料後重啟開封日",
    "TRANSTOSHORTRUN": "轉換為Short-Run 管制圖",
    "DIRECTORNAME": "負責人姓名",
    "FACTORSHORTRUN": "Factor Shor Trun",
    "EQP FIXED QUANTITY SETUP": "設備定量保養設定",
    "QCITEM DELETE FOR ATTRIBUTES": "刪除計數型品管項目量測記錄",
    "CHANGELOTPRODUCT": "生產批產品變更作業",
    "STORAGE OF MATERIALSTATE": "存料現況",
    "BYPS_COMPONENTNO": "依不同區段編碼",
    "SCENARIOBASISDEF": "劇本定義",
    "FROM MATERIALNO": "From Material No",
    "RECIPEITEMDATA": "參數資料",
    "GENERATION": "產生",
    "EQUIPMENTLOTSTATE": "生產批執行_設備",
    "SPC ATT LIMIT": "計數管制內容",
    "INVENTORY_WIPCOMPTURN": "在製品元件轉庫",
    "CUSTOMERLOTNO1": "客戶批號",
    "DOES NOT EXIST IN PROCESS": "不存在於流程中",
    "CUSTOMER SHIP ADDRESS": "客戶出貨地址資料",
    "EQPQCLISTBASISDEF": "設備點檢表設定定義",
    "REPORTMAP": "報表索引",
    "PLANINSPECTOR": "計畫檢驗員",
    "QUERYBARCONTROLCHARTBYFACTOR": "管制圖分析_以要因查詢",
    "INVPREORDERLOGDEF": "預訂單紀錄定義",
    "PLEASE SET D3 ACTION FIRST": "行動對策未建檔，請先行完成D3行動對策資料",
    "PLANINSPDATE2": "預計檢驗日",
    "EQP TYPE": "設備類別資料",
    "NEW AND OLD PASSWORD MUST HAVE DIFFERENT CHARACTERS AT LEAST": "新舊密碼至少需要多碼不同的字元",
    "REPORTNAME": "報表名稱",
    "REPORTTYPE": "報表類型",
    "ANDTHENSETUPTEMPLATE": "才能設定樣板",
    "ENGLISHWORDS": "至少含N個英文字母",
    "REPORT MAP": "報表索引",
    "FROMSHPDATE": "從出貨日期",
    "QCITEMFORATTRIBUTES": "計數品管項目",
    "SYSTEMINFO": "系統資訊",
    "SYSTEMPRIV": "系統權限",
    "SYSTEMUNIT": "系統單位",
    "EQUIPMENTACCSTATELOGDEF": "設備配件歷史資料查詢定義",
    "SYSTEM FUN": "系統函式",
    "SYSTEM LOG": "系統記錄",
    "EQP CAP MAPPING": "設備能力設定",
    "EQP GROUP BASIS": "設備群組資料",
    "EQPQCLIST": "設備點檢表",
    "SPC ANALYSIS": "SPC 分析",
    "TAKESOUT": "下載具",
    "ANSVARRAWDATA": "計量品管檢測資料",
    "RULEOPTION": "分批方式",
    "DATAARCHIVE": "數據封存",
    "PRODUCTSEARCH": "產品內容查詢",
    "WIPDATE_LOT": "下線日(Lot)",
    "UNEXPAND": "不展開",
    "UNEXPORT": "已驗未拋轉",
    "SAMPLERULE_WAFER": "抽樣規則_晶圓",
    "WIPDATEFROM": "下線日從",
    "COMONLINEHELP": "線上說明",
    "SUBCONTRACTORCONTDATA": "外包商聯絡人資料",
    "EQP VENDOR": "設備供應商基本資料",
    "MAINFRAME": "主畫面",
    "CANNOT PACK IN THE SAME": "不可包入同一",
    "SPCCOMPLETE": "SPC檢驗完成",
    "WAFERMAJORNO": "刻號主碼",
    "MONTHLY CHART REPORT BY FACTOR": "管制圖月報表_以要因查詢",
    "PMMAINTENANCEPLANQUERY": "設備保養計畫查詢",
    "TOBASELOTNO": "To Base Lot No",
    "LEDPARAMETERBASISDEF": "產品參數主檔定義",
    "QCITEM_ATTRIBUTES": "計數",
    "CONTROLLED": "屬性控管方式",
    "DO NOT GET VALUE": "無法取得資料",
    "INVFGDINCONFIRM": "成品入庫單確認",
    "POPULATIONQTY": "母體數(批量)",
    "PRDQCITEM": "產品規格設定",
    "DTHOSTCLIENT_TCPIP": "DT Host 模擬器",
    "MOSOURCESHOW": "工單來源",
    "REFERENCECARRIER": "參考載具",
    "OUTPUTUNITNO": "產出單位",
    "BR_LB_CIEQC_FT": "企業邏輯-電信(EQC)抽樣規則登入_等級",
    "STARTING INSPECTION": "始業點檢",
    "PRDMAXTIME": "生產時間限制(站與站)",
    "PIECHART": "圓餅圖",
    "PRODUCTTECHSPECDEF": "Product Tech Spec Define",
    "LOCATOROUTDETAIL": "下架明細",
    "SOFTWAREBIN": "Software Bin",
    "ACCEPTNUM": "允收數",
    "ACCEPTQTY": "允收數",
    "SOP NUMBER": "標準程序號碼",
    "ACCESSORY": "配件",
    "EQP EXECUTION": "設備_執行",
    "CHARTINFO": "基本資訊",
    "CHARTMNTH": "管制圖月報表",
    "ISSENDDPM2ERPNO": "否",
    "CHARTDATA": "圖資訊",
    "ALTERNATIVE": "擇一",
    "CHARTUNIT": "單位",
    "CHARTTYPE": "管制圖類別",
    "CHARTVIEW": "圖表檢視",
    "POSITION BASIS": "工位基本資料",
    "REPAIR END TIME": "維修結束時間",
    "WP_LOTSPLIT": "分批處理",
    "ELEMENT BASIS": "特性設定",
    "NOT DEFINE TONODE": "找不到Node",
    "PRD STAGE STEP SET": "產品製造層別使用設備指定",
    "NOT ALLOW TO EDIT": "不允許修改",
    "END NODE CAN NOT BE FROM NODE": "END Node只可有InLink",
    "DEFAULTCAPACITY": "預設產能",
    "WORKTIMETEMPLATE": "工作日曆樣板",
    "CANNOT BE FOUND IN MES PARAMETER": "不存在於MES參數中",
    "SAMPLEPOINTNUM": "抽樣點數",
    "OPCLASSSHOW": "作業站分類",
    "MATERIAL GROUP": "物料群組",
    "PROBLEMDESCRIPTION8D": "D2問題描述",
    "REPAIR OPERATION DOES NOT ALLOW THE COMBINATION OF MOLD WITH EXIST MOLD FIXTURE": "叫修作業不允許組合配件內存在組成配件",
    "QCCALCULATESCRIPT": "品管項目計算式描述語言",
    "RCVDATE": "回貨日期",
    "CORRELATION": "相關係數",
    "CO_DETAIL": "生產登錄明細",
    "SETPROCESS": "綁定流程",
    "EQUIPMENT FAVORITE": "過帳設備設定",
    "RPT_ON_LOTLOG": "即時生產歷程",
    "SAMPLEAREA": "抽樣區",
    "MATERIAL BASIS": "物料基本資料",
    "TRANSFERFACTORYDEF": "換廠作業定義",
    "SAMPLEOPNO": "取樣站別",
    "SAMPLERULE": "抽樣規則",
    "SAMPLERATE": "抽樣比率",
    "SAMPLESIZE": "樣本數",
    "SAMPLEPLAN": "抽樣計劃",
    "SAMPLETYPE": "抽樣類型",
    "MUST BE LESS THAN OR EQUAL TO": "必須小於或等於",
    "SEMI_LOT": "在製品",
    "SEMI_BIN": "在製品_等級",
    "SEMIINNO": "半成品入庫單編號",
    "CCMAILGROUPNO": "附件收件群組",
    "INVPRODUCTINDETAIL": "入庫單明細",
    "SEMI OUT": "開立半成品出庫單",
    "SEMI INV": "半成品庫帳務維護",
    "PAGE MAP DATA QUERY": "成品Bin分佈表查詢",
    "CHARACTER": "字元",
    "TOTAL LOGIN TIME": "總登入時間",
    "ONLYONCE": "執行一次",
    "VAR_MEASUREDATAMEMO": "計量值量測數據（Memo)",
    "ACCTOTALUSEDQTY": "目前累計總使用次數",
    "ALLOWEXECLOTBYCARRIER": "允許以載具編號刷卡過帳",
    "SELECTEDDATA": "已選的資料",
    "SELECTEDITEM": "已選項目",
    "LED_WAFERRCVQUERY": "來料刻號及電性值",
    "SELECTEDUSER": "已選的使用者",
    "SHOW AREA": "區域查詢",
    "TARGETLOTNO": "目標批號",
    "PRINTRESULT": "列印結果",
    "PRIORITY_MO": "工單優先權",
    "SEMIPRODUCT": "半成品",
    "MATERIALRETURNDETAIL": "退料單明細",
    "DEFINESCRIPT": "定義描述語言",
    "PACKSETCOPY": "裝箱設定-複製到其他產品",
    "PERFORMANCE-YIELD": "績效-良率",
    "FIXEQPTIME": "固定機時",
    "RPT_ON_PRDOPLOTDEF": "產品作業站總批數查詢定義",
    "ERPWORKREPORT_CANCEL_T100": "取消報工單_T100",
    "ALLOWLOTPRODUCTCHANGE": "允許生產批變更產品",
    "PLEASE GET A NEW SERIAL NO": "請取得一組新序號",
    "MAXIVALUE": "最大值",
    "SELECTPREORDERDETAIL": "選擇預訂單明細",
    "USERMONITOR": "連線狀況",
    "NONE DEFINE END NODE": "找不到END Node",
    "OPGROUPDATA": "作業站群組資料",
    "OPGROUPNAME": "作業站群組名稱",
    "MO CLOSE": "工單結案",
    "LAYERCODE": "Layer Code",
    "ORGBINSTATE": "原始Bin分佈",
    "MO BASIS": "工單基本資料",
    "TOOLUSEDETAILL": "使用工具",
    "SCRAPCOMPONENT": "損壞元件",
    "FINALMONO": "Final MO No",
    "FINALBIN1": "Final Bin",
    "FINALBIN2": "Final Bin",
    "ALERTEVENTSOURCE": "警示事件來源",
    "ELEMENTBASISDEF": "特性設定定義",
    "RULEACTION": "法則動作",
    "SUBOPSEQUENCE": "次序",
    "FORWARDERBASIS": "貨運行基本資料",
    "COLLECTFACTOR": "收集要因",
    "WAITLOTSPLIT": "等待分批",
    "ISSUELOGDEF": "簽核記錄查詢定義",
    "OUTSOURCE": "外包",
    "CANTGETPLANENO": "找不到抽樣計劃！",
    "GETBASELOTNO": "...",
    "WIP ERF UNRELEASED": "未解除異常單",
    "DATETIMEPERIODCONDITION": "時間週期條件",
    "INVSEMIDETAIL": "半成品庫明細",
    "SELWAFER": "挑選基板",
    "PLUSCHAR": "+",
    "GOSTATUS": "Go Status",
    "IMMEDIATEWAITSETDEF": "立即等待設定定義",
    "WAITLOTMERGE": "等待併批",
    "REJLOTQTYN": "有N筆拒收",
    "SERIAL RULE CONFIG": "序號規則設定",
    "EQUIPMENT STATE LOG": "設備狀態記錄查詢",
    "HISTORYTABLENAME": "歷史資料表名稱",
    "QCITEMDELETEFROATTRIBUTES": "刪除計數型品管項目量測記錄",
    "PROCESS VERSION": "流程版本",
    "SEMI_SEMI OUT": "半成品-出庫單",
    "MAINTENANCETYPEDEF": "預防保養維護方式設定定義",
    "QUERYLRRANDPPMCHART": "拒收率/百萬不良數管制圖",
    "PACKCARTONQTY": "大箱裝箱數",
    "EQPPREVENTIVEMAINTENANCEPLAN": "設備保養計畫",
    "INVMATERIALOUT": "開立領料單",
    "ATT_ONLINECONTROLMEASUREDATACOMPONENT": "計數線上資料收集_元件",
    "TRANSFERFUNCTION": "轉換函式",
    "FUNCTIONNO1": "功能編號",
    "FUNCTIONKEY": "功能鍵",
    "SHOWFIELD": "顯示欄位",
    "COMGRIDPROPERTIES": "格線屬性",
    "EQUIPMENTSTATELOGTOPTENPIECHART": "前十項設備狀態記錄派圖",
    "ACCCATEGORYIMPORT": "配件分類匯入",
    "BR BASIS": "企業邏輯設定",
    "UNWAFERSTARTQTY": "UnWafer Start Qty",
    "MO QUERY": "工單查詢",
    "DURATION": "CO-CI(分)",
    "SOME OF THE ADJUST LOTS ARE NOT TO CONFIRM": "尚有未盤點調帳確認之生產批",
    "SELFMADE": "自製",
    "SELFDUTY": "Self Duty",
    "PRODUCT OP AMEND": "產品作業站修正",
    "MONONOTEXIST": "工單不存在",
    "SELECTED": "已選擇",
    "STANDARDUSEQTY": "標準用量",
    "CONFIRMQTYCONVERSION": "確認",
    "INHERITMOTHERPRODUCTNO": "沿用母批產品編號",
    "EQPTYPESOPDEFINE": "設備保養標準程序定義",
    "BROKERBASIS": "報關行基本資料",
    "SHOWEMPTY": "顯示空值",
    "COLUMNNAME_CHT": "中文欄位名稱",
    "SHOWORDER": "顯示順序",
    "RECIPEGROUP": "參數群組",
    "ORDERQTY": "數量",
    "VISCOSITY": "Viscosity",
    "GOINVENTORY": "入庫",
    "FILESERVICEPASSWORD": "檔案服務密碼",
    "REPAYBYITEM": "工單項次回報",
    "REPAYBYWONO": "整張工單回報",
    "ADDCONDITIONOP": "新增條件式作業參數",
    "ADDATTACHFILE": "附件",
    "ADDATTACHFORM": "新增表單附件",
    "CASSETTEWEIGHT": "Cassette 重量",
    "ACCESSORYNAME": "配件名稱",
    "ACCESSORYLIFE": "配件壽命",
    "EQP BASIS": "設備基本資料",
    "ACCESSORYTYPE": "配件類別資料",
    "OUTSOURCING_PROCESS": "外包還原",
    "RECIPEBASIS": "設備參數",
    "CALBYCOMPONENT": "依元件",
    "UNSEL_C": "取消",
    "UNSEL_B": "取消",
    "UNSEL_G": "取消",
    "PRSMODULE": "流程資料",
    "USCRAPCL": "U-Chart Scrap 管制中心",
    "USCRAPLS": "U-Chart Scrap 規格下限",
    "USCRAPUS": "U-Chart Scrap 規格上限",
    "QUERYCHARTALLCAPABILITY": "製程能力報表",
    "L3_UNITNO": "第三層產出單位",
    "EQPMAINTENANCEPLANSET": "保養計劃變更設定",
    "ALREADY ARRIVED": "已達到",
    "MASTERCONDITION": "主資料條件",
    "IMMEDIATEHANDLINGNAME": "即時處置名稱",
    "BE SURE SAVE": "確定儲存",
    "CURRENTUSERNO": "目前使用者編號",
    "SHOWSUBOP": "顯示作業工序",
    "MASTERCONDFIELD": "主資料條件欄位",
    "WIPSWRBASISREAD": "特殊生產需求",
    "EQPCHECK": "點檢控管",
    "NEXT_PALLETQTY": "下一個PCS之歸屬棧板",
    "IS CHANGED": "已經變更",
    "WIZARDINFO": "點下一步繼續進行你的變更",
    "LOCATORMANAGEMENT_OUT": "下架",
    "DISPOSITION HAVE BEEN VERIFIED！": "該矯正行動已有驗證",
    "SHOWRUNCARD": "顯示流程卡",
    "PRS CONFIG": "流程設定",
    "MOIQC_COMPONENT": "元件進貨檢驗",
    "UNMOUNT": "下料",
    "EQPREPORT": "設備現況查詢",
    "RECIPEVALUE": "參數值",
    "EQPRECIPE": "設備參數",
    "EQP LOGIN": "設備登入站別/區域",
    "EQPGROUP": "設備群組",
    "UNGROUP": "取消群組",
    "UNIT NO": "單位編號",
    "BOXLABEL": "小箱標籤",
    "UNITDEF": "單位定義",
    "DATATYPESHOW": "資料類別",
    "STAGEBASIS": "製造層別基本資料",
    "DTBASISDEF_TCPIP": "DT 定義",
    "EQPSTATECONTROL": "設備狀態控管",
    "EQPNOACC": "設備未掛載配件",
    "BILLBOARD_OPOUTPUTSUMMARYDEF": "作業站時段產出看板定義",
    "EQP STATE": "設備狀態設定",
    "TAKERBASIS": "取貨公司基本資料",
    "EQPQCLOG": "Equipment QC Log",
    "IS DIFFERENT FROM": "不同於",
    "TOOLUSEDETAIL": "已使用工具明細",
    "MATERIALPROPERTYDATA": "物料屬性資料",
    "FUNCTIONNO": "功能編號",
    "FUNCTIONID": "功能ID",
    "AVAILABILITY_DEFINE": "Availability : 可用性(%)",
    "8DPRECAUSIONDATA": "預防措施資料",
    "EQPPLACE": "Equipment Place",
    "EQPSTATE": "設備狀態",
    "ACTIVEENDDATE": "作用結束時間",
    "TABLETYPESHOW": "資料表類型",
    "SERIALTYPENO_LOT": "批號序號規則",
    "AREALAYOUT": "區域配置",
    "LOADPORTFULL": "可加工批數已達上限",
    "DOEST NOT DEFINE ANY IN LINKS": "doest not define any In links",
    "QCPERIODUNIT": "小時",
    "ARCHDATABASETYPE": "封存資料庫類型",
    "PRDRECIPE": "產品參數群組",
    "DISPGROUPNO": "處理群組",
    "INVENTORY_SCRAPTURNERP_TP": "原物料報廢至TipTop ERP",
    "CONT_COMPMATERIAL_BYMATERIALDEF": "物料用於元件查詢定義",
    "OLDMAXVALUE": "最大值(舊)",
    "ADDPRODUCTNO": "產品編號",
    "SAMPLING TABLE": "抽樣表格",
    "ISSUEJOBMAP": "簽核流程對應",
    "ISSUEJOBDEF": "簽核工作定義定義",
    "EQPCONSUMESTATUSRESET": "機台耗品更換",
    "EQP_SYSFLOW": "設備管理",
    "DESTINATION": "目的地",
    "ONLINESTATE": "線上",
    "HANDLESIMMEDIATELY": "即時處置",
    "REM_BOXQTY": "小箱剩餘數",
    "RMAFLAG": "RMA Flag",
    "ANSPLINECHART": "不良率管制圖",
    "LOT PROPERTYNO": "生產批屬性編號",
    "OUTUNITNO": "Out Unit No",
    "ACC LIFE ARRIVED": "治具壽命已到",
    "PARAMETERNO": "參數編號",
    "PARAMETER10": "參數 10",
    "PARAMETER08": "參數 08",
    "PARAMETER09": "參數 09",
    "PARAMETER04": "參數 04",
    "PARAMETER05": "參數 05",
    "PARAMETER06": "參數 06",
    "PARAMETER07": "參數 07",
    "PARAMETER01": "參數 01",
    "PARAMETER02": "參數 02",
    "PARAMETER03": "參數 03",
    "SUBSTITUTIONVENDORDATA": "備品供應商資料",
    "SN_P_BACK": "棧板編碼後置字元",
    "ANSSCATTERCHARTYMWCAPABILITY": "區間製程能力分析",
    "PRODUCTTECHSPEC": "Product Tech Spec",
    "EQPCAPABILITYSTATUSDEF": "設備能力定義",
    "DEDUCTIONRETEST": "減項複檢",
    "QCITEMNAME": "品管項目名稱",
    "QCITEMRULE": "計量品管項目管制法則對應",
    "CAN NOT WRITE ALL ESSENTIAL FILES, PLEASE RESTART SYSTEM AND EXECUTE CLEARCACHE": "無法寫入必要的檔案，請重啟系統並執行ClearCache動作",
    "QCITEMTYPE": "品管項目類別",
    "ATTRIBPHASESHOW": "特性階段",
    "QUERYLINECHART": "查詢彙整分析圖",
    "ENG RECIPE": "工程參數",
    "FGDINNO": "成品入庫單編號",
    "SUBSCRIPTIONMANAGEMENTDEF": "訂閱管理定義",
    "SHORTLOGID": "記錄編號",
    "GETDBPASSWORD": "編解譯密碼",
    "ENDCAPVALUE": "設備能力結束值",
    "DELIVERYTERM": "運送(Delivery Term)",
    "FGD INV": "成品庫帳務維護",
    "ISSUEOPTION": "簽核選項",
    "SELECTCUSTOEMRNO": "選擇客戶編號",
    "PMFINISHSTATE": "工單完成與回報狀態",
    "SELECTFACTOR": "選擇要因",
    "UPDATESQL": "Update SQL",
    "STARTBRNO CAN NOT BE CHECKOUT WHEN STARTOP AND ENDOP ARE SAME": "開始與結束作業站相同時, 開始企業邏輯不可為CheckOut",
    "DRAWFORM": "繪圖表單",
    "DRAWOUT2": "取出",
    "DRAWOUT1": "取出",
    "ERPSETTING": "ERP整合設定",
    "PRODUCTION TASKS": "生產任務",
    "CHANGECARRIER": "更換載具",
    "EQUIPMENTNAME": "設備名稱",
    "RETESTLOT": "重檢批",
    "EQUIPMENTTYPE": "設備類別資料",
    "EQUIPMENTSPEC": "設備規格",
    "ALARMCOUNT": "警告鈴聲次數",
    "REPAIRENDDATETIME": "維修結束日期",
    "SCENARIOXML": "Scenario XML",
    "SELECTCUSTOMERNO": "選擇客戶編號",
    "ACCPROPERTYDATA": "模製具屬性資料",
    "ISSUEOBJECT": "簽核主旨",
    "SNAPTOGRID": "對齊格線",
    "SENDTIME": "傳送時間",
    "LOGININF": "登入資訊",
    "FIXEDQUANTITYSETUPDEF": "設備定量保養設定定義",
    "SENDMAIL": "寄送郵件",
    "DOUBLEAUDIOANS": "音頻分析儀*2",
    "QCITEMDELETEFORATTRIBUTES": "刪除計數型品管項目量測記錄",
    "FIRSTLOTDATE": "首批時間",
    "MOBASISDEF": "工單基本資料定義",
    "EQUIPMENT STATE LOG QUERY": "設備狀態記錄",
    "INVRAWWAFERTURN": "基板物料轉基台",
    "INSPMACHINE BASIS": "檢測機台基本資料",
    "L4_UNITNO": "第四層產出單位",
    "PLEASE CHOOSE THE RUN ENVIRONMENT": "請選擇執行環境",
    "STABLEQCFORMQCITEMMAP": "安定性試驗單明細定義",
    "WIPLOTSELECTBYCOMP": "生產批執行_元件",
    "DISPATCHORDER IS NOT TOP PRIORITY": "派工順序不為最優先順序",
    "LOGSTATE": "紀錄狀態",
    "HISTOGRAMSELECT": "直方圖選項",
    "MTLMATERIALIMPORT": "物料資料匯入",
    "HOLDITEMDISPOSITIONDONE": "異常原因處置完成",
    "PIADDATA": "PIAD Data",
    "REPORTBASIS": "報表基本資料",
    "RPT_ON_OPLOTQTYDEF": "作業站生產現況查詢定義",
    "OUTPUTQTY": "產出數量",
    "RETICLESETNO": "配件組編號",
    "STDVALUE": "標準用量",
    "DATABASE ONLY SUPPORT": "資料庫僅支援",
    "REPORTLEVEL": "報表等級",
    "SYSMENUITEMSOURCE": "系統選單項目來源",
    "RO DATA": "訂單基本資料",
    "CURRENTSTATUS": "目前狀態",
    "PSORDER MUST BE CONTINUATIVE": "流程的區段次序必須是連續的",
    "DATA IS NOT COMPLETE , MO COMPONENT DATA NOT FOUND": "資料不完整，無工單元件資料",
    "RULENAME": "法則名稱",
    "CONTENTTYPESHOW": "內容類型",
    "RULEDRAW": "規則繪製",
    "REJECTCOUNT": "Reject Count",
    "POINTCOLOR": "圖點顏色",
    "RULETYPE": "法則類別",
    "TESTCATCHTABLE": "測試快取資料表",
    "THERE IS NO ANY EMPTY CARRIERNO CAN BE USED NOW": "目前未有任何一筆空的載具可使用",
    "PRODUCTIONPROCESS": "生產流程",
    "REPORTGROUP": "報表群組",
    "DEPARTMENTNO": "部門編號",
    "INVMATERIALRETURNDETAILDEF": "退料單明細定義",
    "WIP MATERIAL RETURN": "開立退料單(WIP)",
    "CAN NOT BE EARLIER": "不能早於",
    "LOGCREATOR": "紀錄建立人",
    "PCHARTSIGNBOARD": "不良率管制圖看板",
    "STOCKMANAGEMENT": "在製貨架上下架作業",
    "TOOLUSEDDETAIL": "已使用工具明細",
    "WIPAREAOPERATORLOG": "登錄歷史紀錄",
    "IMPORT_QCCHARTBASIS": "匯入管制圖內容",
    "INVTRANSACTIONSTATE": "交易狀況",
    "TRIAL EXPIRED DATE": "試用到期日",
    "GROUP NAME": "群組名稱",
    "RULEOPTIONSHOW": "分批方式",
    "CONFIG SETTING": "Config 設定",
    "SELECTALLAGENTSETTING": "選擇所有代理人",
    "THIS OS IS BUILT BY BR": "此外包單由企業邏輯建立",
    "PROPERTY DATA WIDTH OR LENGTH IS NOT CORRECT": "屬性資料寬度或長度不正確",
    "ISSUEJOBSERIALNO": "簽核工作序號",
    "PSCRAPLCL": "P-Chart Scrap 管制下限",
    "PSCRAPUCL": "P-Chart Scrap 管制上限",
    "EARLYMORATE": "提前開工率",
    "MOQUERY2DEF": "工單達交率(準時開工)定義",
    "MOQUERY3DEF": "工單達交率(準時完工)定義",
    "WO_UPDATE": "工單變更",
    "ORGLOTNO": "原始批號",
    "ROUTING": "流程",
    "MESFUNCTIONNO": "MES功能編號",
    "RETURNUSERNO2": "還原人員",
    "POINTPIECE": "點/每片",
    "EQC SAMPLE RULE": "電信(EQC)抽樣規則",
    "BREAKDOWNNO": "故障編號",
    "ROSTATE": "狀態",
    "APSINTEGRATION": "APS整合",
    "LOTQTYADJUSTSELECTDEF": "生產批數量調整定義",
    "CALENDARBASISDEF": "行事曆設定",
    "ISNETFLOWYES": "是",
    "ROWDATA": "筆資料",
    "UPDATETYPESHOW": "更新方式",
    "INVENTORY_FGDSTOCKIN_T100": "入庫至T100 ERP",
    "WAITSOURCE": "Wait Source",
    "ROMDATE": "RO M Date",
    "PROBLEMDESCRIPTION": "問題描述",
    "EQPTYPESOPBASISDEF": "設備保養標準程序定義",
    "GUMHOUR": "膠類時效",
    "EQPSWITCH": "設備可用能力",
    "IC CONFIG": "IC 設定",
    "EQPSTATE2": "設備狀態",
    "EQPSTATE1": "設備狀態",
    "COMCHKPASSWORD": "使用者登錄",
    "OPBUSINESSRULEDRAW": "作業站企業邏輯繪圖",
    "LOTPROPERTYBASIS": "生產批屬性設定",
    "MOTYPESHOW": "工單類別",
    "MOTYPENAME": "工單類別名稱",
    "MOTYPECODE": "工單類別簡碼",
    "SCRAPSTOCKIN_TP": "不良品入庫至Tip Top ERP",
    "UNSELECTALL": "全不選",
    "INVTRANSACTIONBASIS": "交易主檔",
    "PMSERIALNO": "設備保養序號",
    "HAVE NOT ANY ATTRIBUTE T​​O CHANGE": "",
    "CURRENTDTSTATE": "現行DT狀態",
    "NEEDRULE": "必規規則",
    "NEWPASSWORD": "新密碼",
    "ROBASIS": "訂單基本資料",
    "REPORTBASISDEF": "報表基本資料定義",
    "ERFPARETO": "異常單柏拉圖分析",
    "ROCLOSE": "訂單結案",
    "MODELNAME": "模型名稱",
    "PLANFINISHTIME_BYLOT": "預計完工查詢",
    "MODELTYPE": "模型類型",
    "DATAENDTIME": "資料彙整結束時間",
    "PLEASE CHECKING THE GPIB BOARD INDEX 0 IS EXISTENT AND PRIMARY ADDRESS SET 17": "請檢查GPIB卡號0是存在的且主要位址設置為17",
    "FROMFINISHDATE": "從完成日期",
    "GROUPTYPE1": "群組類別",
    "BILLBOARDTIMESTEPBASISDEF": "產出看板時段主檔定義",
    "USEPRODUCTSERVICE": "使用各別產品整合接口",
    "INVSCRINVENTORYDEF": "報廢倉庫房資料定義",
    "PRODUCTPACKINGRULEBASIS": "包裝規則設定",
    "ONTIMEMORATE": "準時開工率",
    "RUN CARD": "列印流程卡",
    "GROUPORDER": "Group Order",
    "EXECUTEPROCESS": "執行流程",
    "EQPSELECT": "▽",
    "INHERITMOTHERLOTNO": "沿用母批批號",
    "MUST BE MULTI DATA": "必需多筆資料",
    "PRODUCTQCITEM": "產品品管項目",
    "WIPSEMIINV": "在製品庫",
    "GROUPBASIS": "群組基本資料",
    "SINGLEQCITEMNO": "單一品管項目",
    "EQUIPMENTBASISDATA": "設備主檔資料",
    "ARCHIVING": "封存中",
    "WOFINISHEDDATE": "工單結案日期",
    "LOCATORMOVEDETAIL": "轉移明細",
    "TOTAL_BOXQTY": "總小箱數量",
    "NOT ALLOW TO CONFIRM": "不允許確認",
    "OPGROUPSELECT": "選擇作業站群組",
    "WAITBASIS": "等待單資料",
    "EQUIPMENTLOTSTATEDEF": "生產批執行_設備定義",
    "COUNTBYPIECE": "計件",
    "CLEARANDCOUNT": "清除重算",
    "HOLDMESSAGE": "異常訊息",
    "MAXREASONABLEVALUE": "合理最大值",
    "FIELD05": "警示欄位5",
    "FIELD04": "警示欄位4",
    "FIELD03": "警示欄位3",
    "FIELD02": "警示欄位2",
    "FIELD01": "警示欄位1",
    "FIRST BR": "第一個企業邏輯",
    "PRODUCTVERSIONCHANGE": "產品版本變更",
    "WAFERGRADEPRIORITY_LED": "Wafer Life Grade優先權",
    "PACKPALLETQTY": "棧板裝箱數",
    "EQUSOPNO": "設備保養程序編號",
    "DATASOURCESTYPE": "資料來源類型",
    "RUNMONTH": "月",
    "LOADPORTSTATE": "上貨區現況",
    "SERIALTYPENO_COMP": "元件編號序號規則",
    "PRSIMPORT": "流程匯入",
    "EXECUTIONFILE1": "執行檔",
    "EAI MESSAGE": "整合訊息",
    "CHANGEEQUIPMENTSTATE": "變更設備狀態",
    "GUMMATERIAL": "膠類",
    "WIPLOTSELECTBYCOMPDEF": "生產批執行_元件定義",
    "PARENTCOLUMN3": "父階欄位3",
    "PARENTCOLUMN2": "父階欄位2",
    "PARENTCOLUMN1": "父階欄位1",
    "LASTUPDATEDATE": "8D單維護最後異動日期",
    "MCLASSDESCRIPTION": "主分類說明",
    "ORGLOTNO_LOTBASIS": "主批原始批號",
    "ROUNDOFF_NUM": "小數點後位數四捨五入",
    "CANT SET ACCESSORY OF PRODUCT": "無法設定產品配件",
    "MATERIALOUTDETAIL": "領料單明細",
    "WIP MO START PRODUCTION": "開線作業",
    "UNSSELALL": "<<",
    "TRANSSTATUS": "Transfer Status",
    "EQPVENDOR": "設備供應商基本資料",
    "INKCOMPOSITION": "INK Composition",
    "INVMATERIALINCONFIRM": "進料單確認",
    "DATADELETE": "數據刪除",
    "COMPOSITION": "Composition",
    "EQPSTOCKER BASIS": "貨架基本資料",
    "AREACOMPOSE": "區域設備配置",
    "OPTPRODUCTNOSHOW": "產品編號選項",
    "REPAIRREGISTER": "維修登錄",
    "MTL SET FROST": "Material Set Frost",
    "EQUIPMENT DATA IMPORT": "設備資料匯入",
    "SELECTACCESSORY": "選擇配件",
    "PROCESSCLASSSHOW": "流程分類",
    "RUNCARD1": "RunCard",
    "LEVELFOUR": "第四層",
    "LEVELFIVE": "第五層",
    "Q_PAGESTATE": "線上Page (線上批+線邊倉生產批)",
    "GETLABELPRINTER": "擷取印表機設定",
    "REFCARRIERNO": "參考載具編號",
    "EQP ACC STATE QUERY": "設備配件現況查詢",
    "SITEPRIVILEGE": "廠區權限",
    "SYSTEMTABLE": "系統資料表",
    "RUNTIME1": "作業時間",
    "PLEASE DISAPPROVE THE QCITEM": "請先解除此品管項目",
    "ALERTEVENTNAME": "警示事件名稱",
    "ALERTEVENTTYPE": "警示事件類型",
    "PACKINGLIST_COMPONENT": "包裝清單_元件",
    "RULESPLITOPTION": "分批選項",
    "SPCMEASUREDATACOLLECTION": "",
    "PMI_QCITEMGROUPINCLUDE": "品管項目與群組對應設定_減項",
    "PLEASE CHECK THE AUTHORITY OF .CONFIG FILE IN IIS": "請檢查IIS中附檔名.config的存取權限是否開啟",
    "EQUIPMENTSTATELOGTRENDCHARTLABEL": "設備狀態記錄趨勢圖(標籤)",
    "WIPCLOSELOTDEF": "零批量生產批結批定義",
    "EQP FAVORITE SETUP": "過帳設備設定",
    "UPDCHECKOUTTIME": "變更結束加工時間",
    "ACCLOTQTY": "允收批數",
    "CHGTAGADDR": "改變Tag位址",
    "EQUIPMENTNO": "設備編號",
    "EQUIPMENTQC": "Equipment QC",
    "INTERCEPT": "截距",
    "GETAREANO": "...",
    "INTERFACE": "介面",
    "INIFILEVERSION": "INI 檔案版本",
    "LOTLOG_REPORT": "生產批歷程明細查詢",
    "PM PERFORMANCE QUERY": "設備保養效率查詢",
    "USEEAISERVICE": "ERP使用中台整合接口",
    "PARAMETERNO MAYBE A FACTOR COLUMN": "SO THAT SPACE CHARACTER IS NOT ALLOWED",
    "SYSTEM USER": "系統使用者",
    "ATTRIBPHASE": "特性作用階段",
    "V_SUBSTRING": "V Sub String",
    "ONLINE CASSETTE STATE": "Cassette 現況查詢",
    "FISHBONE": "魚骨圖",
    "ATTRIBVALUE": "特性值",
    "IS NOT NUMERIC": "不是數值型態",
    "GWBASIS": "GW 主檔",
    "INVPREORDERDETAIL": "預訂單明細",
    "PRODUCTOPAREADEF": "產品作業站資源設定",
    "GWINDEX": "GW 索引",
    "PRODUCTPACKINGLABELRULEMULTIDEF": "標籤規則設定",
    "WIPSCRAPINV": "在製品庫",
    "WIPLOTSELECT": "生產批執行",
    "RPT_CATCHALL": "快取報表",
    "INTERMEDIATE NODE": "中間節點",
    "OPCONTROLRULEDEF": "作業站法則設定定義",
    "PRODUCTIONSTATENAME": "繼續生產狀態說明",
    "FGD DATA OF INVENTORYNO": "庫房編號的成品資料",
    "PRODUCTTECHSPECBASIS": "Product Tech Spec Basis",
    "BE SURE TO DO ALL SELECTED ROWS": "確定要將取的資料進行下列動作",
    "ATTRIBKEYIN": "特性輸入",
    "BREAKDOWN SERIALNO": "故障序號",
    "ONLINECONTROLSELECT": "品管項目管制",
    "ANSPARETOLAST4WEEKDATA": "柏拉圖(前四週資料)",
    "ATTRIBINPUT": "特性值輸入",
    "REPORTBASISDEFINE": "報表主檔定義",
    "ACCESSORYREPAIRNO": "配件維修單編號",
    "CARRIERBASISDEF": "載具基本資料定義",
    "NOT ALLOW TO ADJUST": "不允許調整",
    "FROMRETURNDATE": "從退料日期",
    "SN_P_DECIMALTYPE": "棧板編碼進位方式",
    "MACHINE_WORKING_INTO_GET": "設備加工資訊取得",
    "CALRULE": "統計原則",
    "FT_SWBINCOLLECT": "Software Bin 收集",
    "DELBATCHLOT": "批次刪除已下線生產批",
    "CALTYPE": "型態",
    "INSPSTATUS": "檢驗狀態",
    "RETURNMATERIALQTYLESSTHANZERO": "工單退料數量大於目前數量",
    "CANCEL2": "取消",
    "CANCEL1": "取消",
    "CANT BE": "不能為",
    "COMBINE ACCESSORY CATEGORY": "組合配件分類",
    "IF CLEAR ACCUMULATED DATA": "是否清除累計資料",
    "QC DEFECT CODE BASIS": "缺點主檔",
    "WIPMOSTARTPRODUCTION": "開線作業",
    "ALLOWEXECUTE": "是否允許執行",
    "LIFEMANAGE": "壽命管理",
    "AREAOPERATORSTATE": "區域生產人員登入登出",
    "NODEDISTANCE": "節點間距",
    "COMPUTERNO": "電腦編號",
    "PDLINEBASISDEF": "生產線別基本資料定義",
    "TESTDATA IS EMPTY": "測試資料為空",
    "IS NOT EQUAL SYSQTY OF LOTNO": "不等於目前生產批系統數量",
    "MERGELOT": "生產批併批",
    "COMCOLNO": "否",
    "FIXEDTYPEVALUE": "頻率類別值",
    "INVMATERIALINLOG": "進料單記錄",
    "INVMATERIALINDEF": "開立進料單定義",
    "NUMERATOR": "分子",
    "LOCATION": "位置",
    "CAPTION": "標題",
    "LOGOUTENDDATE": "登出結束日期",
    "SERIALCODECONTENT": "序號編碼內容",
    "CAPITEM": "設備能力項目",
    "INVPROPERTYDEF": "庫房屬性定義",
    "REVERSE FAIL": "還原失敗",
    "LABEL PRINT": "標籤列印",
    "CASCADE": "重疊顯示",
    "CARRIER": "載具",
    "AUTOARCHIVE": "自動封存",
    "MSA CONTROL": "MSA 管制",
    "SUBSCRIPTIONID": "訂閱編號",
    "FIELDNAME": "欄位名稱",
    "MUST HAVE ONE LOT AT LEAST": "必須至少要一筆生產批",
    "IS NOT EXIST": "不存在",
    "DECREASERATE": "耗損率",
    "ECNSTEP3DESCRIPTION": "選取欲變更之特性並輸入變更值",
    "CREATE LOT_EPITAXY": "生產批開立_磊晶",
    "HOLDDESCRIPTION": "異常說明",
    "PROCESSBASISDATA": "流程資料",
    "2DSEPARATESIGN": "2D條碼分隔符號",
    "JOBTYPEDEF": "工作形式設定定義",
    "PACK_PALLETQTY": "已包裝棧板數",
    "WOREPORTSTOCKIN": "當站下線入庫",
    "NO MACHINE CHECK": "沒有做機台點檢",
    "FROM RECIPETEMPNO": "From Recipe Temp No",
    "FRISTINSPECTION": "首檢",
    "THE SYSTEM DETECT OUTPUT WHETHER TO CONTINUE THE CLEANING OPERATION": "紅色燈號系統判定目前站點可以有產出，是否確認繼續清除作業?",
    "DATAINONEPAGE": "顯示於一頁",
    "IS DIFFENENT FROM": "不同於",
    "APPLYEQPACCESSORYDEF": "配件領用定義",
    "IS NOT VALID": "無效",
    "IS LAST ROW": "最後一筆",
    "COMPLETE": "完成",
    "MO BASIS_LED_WAFER": "工單開立_LED_Wafer",
    "LAST_BOXNO": "目前小箱箱號",
    "NEXTNODEID": "節點編號",
    "CHKHOSTNO": "檢查主Host編號",
    "HARDWAREBIN": "Hardware Bin",
    "BILLBOARD OPSTATE": "作業站現況看板",
    "PLEASE SELECT DUMMYWAFER": "請選擇控片資料",
    "TITLEFONTSIZE": "字型大小",
    "FIRSTINSPECTION": "首件檢",
    "OS RETURN": "外包回貨",
    "CTRL CHART ANALYSIS": "管制圖分析",
    "ALLPROCESSES": "所有流程",
    "DTSCENARIONO": "DT 劇本編號",
    "PLEASE SET D2 PROBLEMDESCRIPTION FIRST": "問題描述未建檔，請先行完成D2問題描述資料",
    "LOTQTYALLOCATIONDEF": "撥轉作業定義",
    "ERFSOURCE": "異常單來源",
    "WOCREATED": "已開立工單",
    "PASSWORD INCLUDE SAME CHARACTER GREATER THEN RULE LIMIT": "密碼重複字元過多",
    "FROMPLACETYPE": "退料來源類別",
    "FROM SUBSTITUTIONNO": "From Substitution No",
    "ROWHEIGHT": "列高",
    "EVENTUSERNO": "Event User No",
    "COMBINE ACCESSORY MANAGE": "組合配件管理",
    "PRODUCTPROPERTYDATA": "產品屬性資料",
    "CAN NOT COPY": "無法複製",
    "WAFERPRICEREVISER": "Wafer Price Reviser",
    "STARTBRNO AND ENDBRNO CAN NOT BE N/A WHEN STARTOP AND ENDOP ARE SAME": "開始與結束作業站相同時,開始與結束企業邏輯不可為N/A",
    "CUNSUMNO": "耗品名稱",
    "MSAFREQUENCYBASIS": "MSA檢測數據",
    "START NODE ONLY CAN DEFINE ONE": "START Node只能有一個",
    "VAR_ONLINECONTROLMEASUREDATAWAFER": "Wafer檢測",
    "DELAYFINISHMORATE": "延遲完工率",
    "FIXEDTIMESSETUP": "設備定次定時保養設定",
    "COLMONTH": "月份",
    "ONLYCURVERSION": "工程碼已定義且為目前版本的Recipe",
    "SERVERINFORMATION": "伺服端資訊",
    "OVERSEANO": "否",
    "TO BRNO CANT BE EQUAL TO FROM BRN": "開始與結束企業邏輯不可相同",
    "JUDGEOPTION": "判定選項",
    "OCAPHOLDITEMNO": "選擇處置原因編號",
    "INSTRUMENTBASIS": "儀器主檔",
    "PRESS ENTER": "按下Enter鍵",
    "I_SETUPCLOSE": "結單",
    "CARRIER CAPACITY": "載具容量",
    "SELECTINVENTORYNO": "選擇庫房編號",
    "DIMENSION": "維度",
    "INVSEMIOUTLOG": "半成品出庫單記錄",
    "INVSEMIOUTDEF": "開立半成品出庫單定義",
    "THE LOT IS MANUAL CREATE": "該生產批由手動開單",
    "SHIFTBASISDEF": "班別基本資料定義",
    "VALIDLIST": "有效資料",
    "INCOMING": "收料",
    "LOTMERGEPROCESSDRAW": "繪製流程",
    "CREATORISSUE": "送簽者資料查詢",
    "RUNACTIVE": "作用中",
    "LOTCREATEDEDUCTMATERIAL": "生產批下線時扣料",
    "ABNORMALREPAIRMAP": "不良現象維修方式對應",
    "LOGOFFQTYDISCREPANCY": "Logoff數量差異",
    "DAYTODATE": "天數至今",
    "USER DEFINE FUNCTION": "使用者自訂函式",
    "CANT SELECT START OR END NODE": "不能選取開始或結束節點",
    "REPAIRSERIALNO": "維修序號",
    "SPC ATTRIBUTES": "計數不良原因收集",
    "RETURNTOINVACC": "歸還",
    "OBJECTID": "物件代號",
    "OBJECTNO": "Object No",
    "INVMATERIALOUTBASISDEF": "領料單主檔定義",
    "ONECHARTYMWCAPABILITY": "區間製程能力管制圖",
    "QCOPPORTUNITY": "檢驗時機",
    "PCS_CONTROL": "PCS Control",
    "SHPMODULE": "出貨管理",
    "EQUIPMENTBREAKDOWNBASIS": "故障原因主檔",
    "EQPREPAIRREGISTERDEF": "設備修復登錄定義",
    "QCCHARTRULEDEF": "品管管制圖法則設定",
    "GRACEDATE": "寬限日期",
    "FINISHTIME": "完成時間",
    "FINISHRATE": "完工率",
    "FINISHDATE": "完成日期",
    "MTL BASIS": "物料基本資料",
    "ISALREADY": "已經",
    "HISTORY": "排程歷史紀錄查詢",
    "UNIONPLAN": "共用抽樣計劃",
    "ARE YOU SURE TO ADJUST LOT QTY": "是否確認盤點調帳",
    "ROCLOSEDEF": "訂單結案定義",
    "FREQUENCYBASIS": "頻率基本資料",
    "STATISTICALBASISINFO": "統計資訊",
    "TOTAL NEED": "總共需要",
    "CONT_MATERIAL_BYLOTDEF": "生產批使用物料查詢定義",
    "LOTATTRIBDISPLAY": "生產批特性",
    "MTL GROUP": "物料群組資料",
    "BRSPCONLINECONTROL": "SPC線上管制",
    "CALWAITTIME": "等待時間",
    "PART OF CHARACTER": "擷取部分字元",
    "INVSEMIOUTCONFIRM": "半成品出庫單確認",
    "T_13001510": "T_13001510",
    "ANOTHER COMBINEACCESSORY": "其他組合配件",
    "CLIENTSTARTTIME": "Client Start Time",
    "ERP_VERSION": "ERP版本",
    "QCITEMRULEMAP": "法則對應",
    "QCITEMRULEDEF": "計量品管項目管制法則對應定義",
    "BORDERCOLOR": "邊框顏色",
    "IMAGESIZE": "圖片大小",
    "INVCOUNTSTATE": "盤點關/開帳",
    "ISSUEATTACH": "簽核附件",
    "IV_STOCKERHISTORY": "在製貨架歷程查詢",
    "INVSEMIBASIS": "半成品庫主檔",
    "SURE TO IMPORT DATA": "是否要匯入資料",
    "HIAIRUSER": "HiAir帳號",
    "TAKERBASISDEF": "取貨公司基本資料定義",
    "INVPREORDERBASIS": "預訂單主檔",
    "UNABLE TO ENABLE A SERIAL RULE WITHOUT A SEQUENCE NUMBER": "必須新增一組流水號才能啟用序號規則",
    "FINISHQTY": "完工數量",
    "INSTRUMENT TYPE": "儀器類別",
    "DROPTEXT": "Drop Text",
    "HOLDREASONDISPOSITION": "異常原因處置",
    "LOTINSPECTION": "每批檢",
    "SUBSTITUTIONGROUPBASISDEF": "備品群組主檔定義",
    "INVPRODUCTIN": "入庫單",
    "GROUPCONTROLPRIVILEGEDEF": "群組功能按鈕權限設定",
    "SEMIFGDDETAIL": "入庫單記錄明細",
    "VIOLATE FIFO CONSTRAINT": "不符合先進先出使用限制",
    "EQUIPMENTSTATELOGTOPTENBARCHART": "前十項設備戕態記錄長條圖",
    "STARTCOMPARE": "開始比對",
    "BILLBOARD_OPSTATE_PRODUCTNODEF": "作業站現況看板_產品定義",
    "EXCEPTIONREASON": "除外原因",
    "FIXED-QTY": "Fixed Qty",
    "SEMIINBASISDATA": "半成品進料單資料",
    "FIXEDTYPE": "頻率類別",
    "SERIALCODEFLAGYES": "是",
    "CUSTOMERCONTACTORDEF": "客戶連絡人資料定義",
    "INVSEMIINDEF": "開立半成品進料單定義",
    "INVSEMIINLOG": "半成品進料單記錄",
    "UNINSPECT": "未檢驗",
    "TYPEINPUTDATA": "輸入資料",
    "EQUIPMENTPICTURE": "設備圖片",
    "TRANSFERTO": "移轉至",
    "TRANSFERQC": "移轉檢驗單",
    "DATEINTERVAL": "時間範圍",
    "ERFCLOSEPREVIEW": "ERF開立後，是否關閉Preview畫面不顯示",
    "BUT APPEND CHAR IS EMPTY": "但附加碼是空白",
    "MUST BE RANGE BETWEEN 0 AND 1": "範圍必須介於0到1之間",
    "ISSUESTATESHOW": "簽核狀態",
    "AVAILABILITY": "可用性",
    "BORDERSTYLE": "邊框樣式",
    "WAFER RCV DATA QUERY": "來料電性值查詢",
    "INVCOUNTCLOSE": "盤點關帳",
    "STRAIGHT": "直線",
    "ALEARDY DEFINE DEFAULT PROCESS": "已定義預設流程",
    "DESCRIPTION1": "說明",
    "QUEUEUSERID": "訊息佇列登入帳號",
    "QCFORMTYPE": "檢驗類別",
    "THESE DATA HAVE ALREADY BEEN SAVED. PLEASE SELECT ANOTHER FILE": "資料已儲存，請選擇另一個檔案",
    "EQP CYCLE BASIS": "圈別資料",
    "LOTREARTIME": "批量後置時間(單位:秒)",
    "OCAPSTATUS": "OCAP狀態",
    "LOTISMERGED": "此生產批已進行併批，不允許刪除",
    "FIXEDTIMESWORKORDER": "定時定次保養工單",
    "WIPCHKUSER": "使用者登錄",
    "SELECTCOLOR1": "挑選顏色",
    "SELECTCOLOR2": "挑選顏色",
    "NODESUBPRSDEF": "子流程節點",
    "ONLINE YIELD": "產品良率查詢",
    "REPAIRENDTIME": "維修結束時間",
    "BR_LB_MERGEBYRULE_FT": "併批處理 - 等級(by Rule)",
    "ONLINEREPORT": "即時報表",
    "INCOMINGDATA": "收料",
    "HAVING LEVEL": "有等級",
    "BR_LB_SPLIT_FT": "分批處理_等級",
    "INSTRUMENT BASIS": "儀器主檔",
    "TAKER BASIS": "取貨公司基本資料",
    "CONDITIONVALUE": "值",
    "CARRIEROUT": "下載具",
    "FIRST GROUP": "第一處理群組",
    "PROGRAMVERSION": "測試程式版本",
    "EQCSAMPLERULEDEF": "電信(EQC)抽樣規則定義",
    "IMMEDIATEACTION": "即時行動",
    "CASSETTEDATA": "Cassette 資料",
    "REVERSECHECK": "還原檢查",
    "REPAIRFINISH": "維修完成",
    "CREATORISSUEDETAIL": "簽核明細",
    "GROUPTYPESHOW": "群組類別",
    "CANCEL USER AGENT": "取消代理人",
    "AGENT DELETE": "取消使用者代理人",
    "TOOTHERQTY": "To Other Qty",
    "MOLEADTIME": "工單LeadTime",
    "REVERSEORDER": "還原命令",
    "PROCESSNOTEXIST": "流程不存在",
    "EQPTYPECUNSUMBASISDEF": "設備耗品主檔定義",
    "ALLOWINV2ERP": "開啟WF ERP成品入庫功能",
    "PMWOFINISHDEF": "保養工單完成與回報定義",
    "FAB SAMPLE RULE": "FAB 抽樣規則",
    "PCS_MATERIALLOT_COMPONENT": "PCS Materiallot Component",
    "INVENTORY_SCRAPSTOCKIN_T100": "不良品入庫至T100 ERP",
    "MATERIALVERSION": "版本",
    "FUTUREWAITDATA": "預先等待資料",
    "HOLD HANDLE": "異常處理",
    "MAINBINYIELD": "主BIN良率",
    "FORMSERIAL": "序號",
    "8DQUERY": "8D單查詢",
    "STOCKER1": "上下架",
    "STOCKOFF": "下架",
    "EAPMODE": "EAP整合模式",
    "HOLDSET": "異常設定",
    "HOLDQTY": "異常數量",
    "EQPMOUNTMATERIAL": "機台上料",
    "CONT_ATTRIB_ADJUST": "生產批作業站製程特性值調整",
    "EQPQCLISTSETUP": "設備點檢表",
    "EQP MATERIAL STATE": "設備物料存量",
    "RPT_ON_PRDOPLOT": "產品作業站總批數查詢",
    "BR_LC_PAGEMERGE_LED": "Page併頁處理",
    "HH24MM1": "(HH24:mm)",
    "APSVAREQPTIME": "APS變動機時(單位:秒)",
    "RESPRODUCTGROUPDEF": "產品負責群組定義",
    "DESCRIPTION_MO": "工單說明",
    "DESCRIPTION_EN": "英文說明",
    "HOURS02": "時",
    "HOURS01": "小時",
    "ACCIMPORT": "配件匯入",
    "NEWCURQTY": "盤點數量",
    "INVENTORY_FGDTURNERP": "成品轉庫至ERP",
    "DATACHANGE": "生產批屬性變更",
    "CHILDCOLUMN1": "子階欄位1",
    "CHILDCOLUMN3": "子階欄位3",
    "CHILDCOLUMN2": "子階欄位2",
    "QUEUESERVER": "佇列伺服器",
    "T_01000310": "T_01000310",
    "CREATEPAGEDATE": "Page開立日",
    "PLANFINISHDATE_LOT": "預計完工日(Lot)",
    "INVCOUNTSTATEDEF": "盤點開/關帳定義",
    "CHECKINCONFIRM": "開始生產",
    "PLANFINISHDATEFROM": "預計完成時間從",
    "TRANSFER FACTORY": "換廠作業",
    "NOT ASSIGN": "未指定",
    "QCSTANDARD": "檢驗標準說明",
    "LOTPROPERTY": "生產批屬性",
    "OPDATAIMPORT": "作業站資料匯入",
    "RUNCARDSCRIPT": "流程卡描述語言",
    "WIP_TEMPORARYTEST": "WIP Temporary Test",
    "MATERIALSTATEUNITNOERROR": "用料清單單位編號錯誤",
    "8DCLOSE": "結案",
    "MATERIAL IN": "開立進料單",
    "MATERIALOUT": "領料",
    "MATERIALLOT": "物料批號",
    "SERIALSPLITLOTDEF": "分批序號規則定義",
    "LEDPARAMETERBASIS": "產品參數主檔",
    "WP8DBASISFACTORYDEF": "廠內8D矯正單資料定義",
    "RESOURCE QUERY": "生產批資源檢視",
    "MAX VALUE": "最大值",
    "FUTUREWAITRELEASE": "預先等待解除",
    "PRINTERNAME": "印表機名稱",
    "EQPQCLISTBASIS": "設備點檢表設定",
    "NEWGROUPLOT": "PN群組",
    "EMPLOYEE": "員工",
    "CHANGEAREA": "變更作業區域",
    "USELAYER": "是否使用層別",
    "CHANGEDATA": "變更之資料",
    "CHANGEDATE": "變更日期",
    "CHANGERULE": "轉換規則",
    "HAVING COMPONENT": "已有元件",
    "COLUMNLINECHART": "直條折線圖",
    "PMPERFORMANCE": "設備保養效率查詢",
    "WAITDISPOSITIONDEF": "等待處置定義",
    "EX_MTLLIST1": "EX_MTLLIST1",
    "EX_MTLLIST2": "EX_MTLLIST2",
    "FIXEDQUANTITYDEF": "設備定量保養設定定義",
    "SPLITCARRIERNO2": "子批2載具編號",
    "SPLITCARRIERNO1": "子批1載具編號",
    "BR_LC_MERGE_GENDEF": "併批處理_元件定義",
    "ERFBATCHHOLDGENTYPE": "ERF單據開立方式是否可一單一批",
    "CUSTOMER CONFIG": "客戶資料設定",
    "QCITEMGROUPDETAIL": "品管項目群組明細",
    "FOUP NO": "Foup 編號",
    "USERTYPE": "使用者類別",
    "SHIPADDRESS": "出貨地址",
    "USERNAME": "使用者名稱",
    "ADDCUSTOMERLOTNO": "客戶批號",
    "USERDEFINEDREPORTDESIGN": "使用者定義報表設計",
    "PRODUCT SEARCH": "產品內容查詢",
    "NEWMAXVALUE": "最大值(新)",
    "PLEASE CHECKING THE GPIB BOARD INDEX 1 IS EXISTENT AND PRIMARY ADDRESS SET 17": "請檢查GPIB卡號1是存在的且主要位址設置為17",
    "RUNTIME_MIN": "作業時間(分)",
    "PACKING_LOT": "包裝作業",
    "PLANENDDATE": "預計完工日",
    "PACKINGRULE": "包裝規則",
    "RETURNSTATENAME": "歸還狀態說明",
    "PACKINGLIST": "開立包裝清單",
    "PACKINGDATA": "包裝資料",
    "PMESTDATETIME": "設備保養時間",
    "TO VENDORNO": "To Vendor No",
    "PACKING QTY": "包裝數量",
    "NOTICEREPORTNAME": "通知報表名稱",
    "HAVELEVELSHOW": "是否有Bin分佈",
    "ISSUEGROUPDEF": "簽核群組資料定義",
    "8DVERIFICATIONDATA": "執行驗證資料",
    "WIP DATA IS NOT ENOUGH": "WIP傳入參數不足",
    "EQP REPAIR REGISTER": "設備修復登錄",
    "BULLETINDEF": "網頁佈告欄定義",
    "ABNOAMRLREPAIRMAP": "不良現象維修",
    "REPORTGROUPUSER": "報表群組-使用者",
    "PLEASE SELECT SPECIFIED ITEM": "請選項特定項目",
    "REPORTGROUPNAME": "群組名稱",
    "FORMAT2": "格式",
    "FORMAT1": "格式",
    "FORMADD": "(新增)",
    "MAINTAINITEMSETUPDEF": "保養項目設定",
    "REQUIREQTY": "需求數",
    "SUBCONTRACTORDEF": "外包商基本資料定義",
    "CORRECTNESS": "正確性",
    "PRECAUSION": "預防措施",
    "EQUIPMENTLOTLOG": "Equipment Lot Log",
    "HNUMBER": "縱向儲位數",
    "EQUIPMENTDESCRIPTION": "設備說明",
    "PLEASE SELECT WHICH LOTS TO SET HOLD": "請選擇欲設定為異常的生產批",
    "PLEASE SELECT WHICH LOTS TO SET WAIT": "請選擇欲設定為等待的生產批",
    "BREAKDOWN BASIS": "故障原因基本資料",
    "TORULENO": "To Rule No",
    "DECOMPOSE": "拆解",
    "OPERATOR LOGIN_LOT": "使用者多人加工登錄_生產批",
    "BYMO_LOTNO": "使用工單號碼",
    "DELCHANGEDAREA": "刪除變更區域",
    "OPTLOTNOSHOW": "批號選項",
    "ISSUEJOBMAPDATA": "簽核流程對應資料",
    "CARSERIALNO": "車輛序號",
    "HANDLING": "處理中",
    "QUERYPCHARTSIGNBOARD": "不良率管制圖看板",
    "FROMNODENAME OF FROMNODEID": "FromNodeName of FromNodeId",
    "ALREADY CREATED AND RELEASED LOT,CAN NOT RETURN": "已開立生產批且已下線,不可退料",
    "ORGMOSTATE": "工單原始狀態",
    "BYFIXEDPIECE": "固定片數",
    "THIS LOT IS STOCKERON, PLEASE CHECK IT": "此生產批目前正在上架狀態無法執行，請確認該貨批的上下架狀態",
    "CUSTOMERMATERIALNO": "客戶料號",
    "RPT_ON_OPLOTSTATE": "即時生產現況",
    "QCITEM OF ATTRIBUTES": "計數品管",
    "WORKPRICETYPE": "工資類型",
    "CARRIER CATEGORY": "載具分類資料",
    "PRDSTAGESTEPSETDEF": "產品製造層別使用設備指定",
    "OPRECIPETEMP": "作業樣版對應",
    "BACKGROUNDIMAGE": "背景圖",
    "TRANSPARENT": "透明",
    "ONLINEUSER": "線上使用者",
    "ONLINETIME": "連線時間",
    "EQPTYPESOPBASIS": "設備保養標準程序",
    "HOLDITEMNO": "異常原因編號",
    "EQPDISPATCH": "派工設備",
    "ARCHIVE2": "封存",
    "ARCHIVE1": "封存",
    "ADJUSTTOCANCEL": "調帳取消",
    "ESTOPPAGERULE": "禁止規則",
    "MTL_SYSFLOW": "物料管理",
    "PLANTYPE": "計劃類別",
    "COMMAND": "命令",
    "COMMENT": "註記",
    "PLANDATA": "計劃資料",
    "PLANDAYS": "預定加工日數",
    "PLANNAME": "計劃名稱",
    "DESSTOCKERNO": "目標貨架",
    "COMPQTY": "使用數量",
    "COMPANY": "公司別",
    "COMPOSE": "組成",
    "COMPORT": "COM 連接埠",
    "FREQUENCY BASIS": "頻率基本資料",
    "COLYEAR": "年份",
    "LOT STILL IN THE GROUP": "IS NOT ALLOWED TO PERFORM CHECK IN",
    "SERIAL NUMBER": "序號",
    "CASSETTEQTY": "Cassette 數量",
    "INVENTORY_FGDTURN": "成品轉庫",
    "MESISSUEMTLTOERPDOCTYPE": "MES發料單別",
    "MO MATERIAL LIST": "工單用料清單",
    "ISSUEJOBMAPDEF": "簽核流程對應定義",
    "TOOL BASIS": "工具基本資料",
    "FLOWBASIS": "系統建模主檔",
    "PARETO DIAGRAM": "柏拉圖分析",
    "CONFIRM": "確定",
    "POSITIONVALUE": "Position Value",
    "CONNECT": "連線",
    "CONTENT": "內容",
    "CONSUME": "耗品資訊",
    "CONVERT": "轉檔",
    "GETMAPPINGFILE": "擷取檔案",
    "INV STOCKER BASIS DATA": "在製貨架基本資料 ",
    "WEBSERVICE": "WebService",
    "CODEEND": "碼數(迄)",
    "AVAILRATE": "稼動率",
    "FLOWORDER": "程序次序",
    "AVAILDLOT": "可生產 Lot",
    "AVAILABLE": "可用",
    "HISTOGRAM": "直方圖",
    "HISTORYDB": "歷史資料庫",
    "INHERITMOTHERCUSTOMERLOTNO": "沿用母批客戶批號",
    "MO MATERIAL STATE": "工單領料現況",
    "LIFESCRIPT": "壽命計算公式(批/數量)",
    "VAR_ONLINECONTROLFACTOR": "計量線上管制要因",
    "Q_TABPACKING": "TAB Packing",
    "EQUIPMENTCONTROLDEF": "設備控管設定定義",
    "INVCOUNTSTATEPRINTDEF": "列印盤點清冊定義",
    "FIRSTGROUP": "第一處理群組",
    "REPORT ENGINEER": "報表引擎",
    "LOADPORT": "批數限制",
    "MATERIALQCITEMSETDEF": "物料品管項目設定定義",
    "DISPATCHBASISDEF": "設備派工處理定義",
    "SYSTEM FUNCTION": "系統函式",
    "PLS_PROVIDE_MSG": "如須尋求協助，請提供下列訊息",
    "BR_LB_SPLIT_FTDEF": "分批處理_等級定義",
    "SAMPLEPLANFROM": "抽樣計劃從",
    "SENDSMSTEST": "測試簡訊手機號碼",
    "TRANSFERTYPESHOW": "轉換類別",
    "CONTROLBYCOUNTQTY": "依批/數量管控",
    "ABNORMALTYPE": "不良現象類別",
    "ABNORMALNAME": "不良現象名稱",
    "CURVERSIONSHOW": "目前版本",
    "DEFAULTINSPECTOR": "預設檢驗員",
    "MESSAGEQUEUESET": "訊息佇列設定",
    "MOPROPERTYBASISDEF": "工單屬性設定定義",
    "USER_DEFINED28": "使用者自定義欄位28",
    "USER_DEFINED29": "使用者自定義欄位29",
    "USER_DEFINED20": "使用者自定義欄位20",
    "USER_DEFINED21": "使用者自定義欄位21",
    "USER_DEFINED22": "使用者自定義欄位22",
    "USER_DEFINED23": "使用者自定義欄位23",
    "USER_DEFINED24": "使用者自定義欄位24",
    "USER_DEFINED25": "使用者自定義欄位25",
    "USER_DEFINED26": "使用者自定義欄位26",
    "USER_DEFINED27": "使用者自定義欄位27",
    "USER_DEFINED08": "使用者自定義欄位08",
    "USER_DEFINED09": "使用者自定義欄位09",
    "USER_DEFINED02": "使用者自定義欄位02",
    "USER_DEFINED03": "使用者自定義欄位03",
    "USER_DEFINED01": "使用者自定義欄位01",
    "USER_DEFINED06": "使用者自定義欄位06",
    "USER_DEFINED07": "使用者自定義欄位07",
    "USER_DEFINED04": "使用者自定義欄位04",
    "USER_DEFINED05": "使用者自定義欄位05",
    "USER_DEFINED31": "使用者自定義欄位31",
    "USER_DEFINED30": "使用者自定義欄位30",
    "USER_DEFINED33": "使用者自定義欄位33",
    "USER_DEFINED32": "使用者自定義欄位32",
    "USER_DEFINED34": "使用者自定義欄位34",
    "USER_DEFINED19": "使用者自定義欄位19",
    "USER_DEFINED18": "使用者自定義欄位18",
    "USER_DEFINED13": "使用者自定義欄位13",
    "USER_DEFINED12": "使用者自定義欄位12",
    "USER_DEFINED11": "使用者自定義欄位11",
    "USER_DEFINED10": "使用者自定義欄位10",
    "USER_DEFINED17": "使用者自定義欄位17",
    "USER_DEFINED16": "使用者自定義欄位16",
    "USER_DEFINED15": "使用者自定義欄位15",
    "USER_DEFINED14": "使用者自定義欄位14",
    "COUNTRY": "國家",
    "TERMINAL NODE": "終端節點",
    "ALLNOTPASS": "全部報廢",
    "SCLASS BASIS": "次分類基本資料",
    "CORRECT": "修正",
    "QCCHARTDETAIL": "品管管制圖明細",
    "MULTIOPERATOR_COLIMIT": "多人加工CheckOut限制",
    "TOTALSAMPLECOMPONENT": "Total Sample Component",
    "ENGPROPERTYDATA": "工程資料屬性",
    "MLOTBINDELETRICBOX": "綁定靜電箱",
    "MINIVALUE": "最小值",
    "FQCFORM": "終檢檢驗單",
    "FQCOPNO": "sQMS FQC檢驗單開立_作業站設定",
    "OEMODULE": "工單管理",
    "OPREFERENCE": "作業參考",
    "VAR_ONLINECONTROLMEASUREDATAWAFERGROUP": "Wafer群組檢測",
    "LED TEST DATA SPEC": "LED 測試資料過濾標準",
    "QCATTSPSERIAL": "QC Att Sp Serial",
    "EQPCYCLEBASIS": "圈別資料",
    "RESOURCEQUERY": "生產批資源檢視",
    "TOTALQTY": "全部數量",
    "TOTALSUM": "總和",
    "TEMPLATEFILE": "樣板檔案",
    "TEMPLATENAME": "樣版名稱",
    "TEMPLATEMEMO": "預設值與描述語言只能擇一定義",
    "DEFAULTINSPWCTOR": "預設檢驗員",
    "PANELCLASS": "Panel Class",
    "NOT ALLOW TO DELETE": "不允許刪除",
    "WORKREPORT": "報工單",
    "SWRBASISREAD": "特殊作業需求",
    "PRODUCTTYPEBASIS": "產品類別資料",
    "CODESTART": "碼數(起)",
    "THE TRANSFER TYPE MUST BE GO FOR OUTSOURCING MERGE LOT": "外包併批生產批轉換方式必須為Go",
    "FORWARDERBASISDEF": "貨運行基本資料定義",
    "CLOCKIN": "上工",
    "ONLINE PRD OP LOT": "產品作業站總批數查詢",
    "ANSSTATISTICS": "Ans Statistics",
    "CLOSED1": "結案",
    "WRONG PASSWORD COUNTS": "錯誤的密碼輸入次數",
    "COMPATTRIBADJUST": "調整",
    "WIPCLOSELO": "零批量生產批結批",
    "INV RAW WAFER": "基板物料",
    "LED WAFER RCV DATA QUERY": "來料刻號及電性值",
    "CONDDESC": "欄位說明",
    "CLEARRT": "清除 RT",
    "CONDHINT": "輸入提示",
    "VAR_MEASUREDATA": "計量值量測數據",
    "LINEUSERSETDEF": "生產線別使用者設定定義",
    "INVSTOCKER BASIS DATA": "在製貨架基本資料",
    "SHIPDETAIL": "出貨單明細",
    "CONFIRM3": "確認",
    "CONFIRM2": "確定",
    "CONFIRM1": "確定",
    "EDITDESCRIPTION": "備註",
    "MONTHRPTCODEBASISDEF": "管制圖月報表編碼定義",
    "INACTIVE": "失效",
    "EQUIPMENTTYPEDATAIMPORT": "設備類別資料匯入",
    "REEXECUTE": "重新執行",
    "SQUARESUMVALUE": "Square Sum Value",
    "IMMEDIATEWAITSETBASIS": "立即等待設定主檔",
    "PLEASE INPUT LOTQTY AND COLLECTFACTOR": "請輸入批量與收集要因",
    "SPECIALBASISMAINTAINDEF": "特殊主檔維護定義",
    "ARE YOU SURE TO APPLY THE QCITEM FROM THIS MATERIAL NUMBER": "是否套用此物料編號至品管項目",
    "PMFINISHSTATENAME": "工單完成與回報狀態說明",
    "SINGLEDECOMPOSE": "單一拆解",
    "AREASHOW": "設備狀態監控_區域",
    "AREATYPE": "區域類別",
    "PANELLEVEL": "Panel Level",
    "MATERIALINBASIS": "進料單主檔",
    "AREANAME": "區域名稱",
    "APPLICATION": "應用",
    "PLEASE HOT COPY PICTURE": "FIRST",
    "COMLABELPREVIEW": "標籤預覽",
    "ATTACHFILENAME": "檔案名稱",
    "ALLOCATIONQTY": "撥轉數量",
    "PMWODETAILDEF": "保養工單定義",
    "ATTACHFILE_CHT": "繁中表單附件",
    "ATTACHFILE_CHS": "簡中表單附件",
    "PUTINPLACETYPESHOULDBE3": "MES僅支援投料點為工單的物料資料",
    "WIPOSBASIS": "外包單開立主檔",
    "SHIP ADDRESS DEFINE": "出貨地址",
    "ENTERPRISENO": "客戶代碼",
    "DEPARTMENT": "部門",
    "GOODINVENTORYNO": "良品庫",
    "SHIPPINGINSTRUCTIONPICKUP": "撿貨確認",
    "WIPLOTSELECT_CE": "生產批執行_網狀製程",
    "WIPLOTSELECTDEF": "生產批執行定義",
    "OCAP BASISERR": "請確認OCAP主檔設置是否正確",
    "PUTINPLACEMONO": "投入工單編號",
    "CONTROL1": "控制項",
    "CONTROLS": "控制項",
    "TOUNUSED": "不使用",
    "CONTINUE": "連續",
    "PUTINPLACESHOW": "投料點",
    "PUTINPLACETYPE": "投料點類別",
    "QCITEMGROUPINCLUDE": "品管項目與群組對應設定",
    "COMPLETEFLAG": "Complete Flag",
    "COMPLETEDATA": "是否為完整資料",
    "INVMATERIALADJUSTBASISDEF": "庫存調整單主檔定義",
    "COMPLETERATE": "完工比率",
    "SELECTEDFACTOR": "已選要因",
    "PARAMETER CLASS": "參數分類",
    "ERRORCOLLECT": "不良原因收集",
    "MATERIALVENDORDATA": "物料供應商資料",
    "ACC STATE CONTROL SETTING": "配件狀態控制設定",
    "SPECNOTICE": "SPEC Notice",
    "SWRDESCRIPTION": "特殊作業說明",
    "RUNCARDNO": "流程卡編號",
    "BOUNDARY": "邊界",
    "PRODUCTION CONFIG": "設備狀態監控_區域",
    "QUERYDATABYLOTNO": "Lot 檢測資料",
    "NODEDEFINE": "節點定義",
    "BOUGHTEN": "外購",
    "BROKERASSIGNED": "報關",
    "QCCOMPLETE": "已驗",
    "PLEASECHECK": "請確認",
    "FROM PMITEMNO": "From Pm Item No",
    "INVSCRINCONFIRM": "不良品入庫單確認",
    "PDLINEBASIS": "生產線別基本資料",
    "ERP SETTING": "ERP整合設定",
    "PLEASE SET D1 TEAMMEMBER FIRST": "團隊資料未建檔，請先行完成D1團隊資料",
    "ABNORMAL BASIS": "不良現象主檔",
    "MO CLOSE_TP": "工單結案_TipTop ERP",
    "WAFER GRADE PRIORITY": "Wafer Life Grade優先權",
    "IS NOT ALLOWED TO EXECUTE": "不允許執行",
    "RULE_WARNING": "提示",
    "INVSTOCKERBASIS": "在製貨架基本資料 ",
    "CONTINUETOPRODUCTION": "繼續生產",
    "CHECKOUT_CARRIER": "載具出站",
    "LOT OP AREA CHANGE": "生產批作業區變更",
    "BILLBOARD_OPOUTPUTSUMMARY_TRENDCHARTDEF": "作業站時段產出_趨勢圖定義",
    "RETURNLOTCOMPDETAIL": "退料明細",
    "OLD PASSWORD": "舊密碼",
    "LEVELTHREE": "第三層",
    "AREATYPESHOW": "區域類別",
    "LOGINENDDATE": "登入結束日期",
    "JUMPMAIN": "跳主流程(Main Process)",
    "SPECITEM": "SPEC Item",
    "SPCINSPABNORMALHOLDLOT": "品檢異常立即暫置生產批",
    "INVENTORYTYPESHOW": "庫房類別",
    "SPECTYPE": "參數類型",
    "SUBSCRIPTION MANAGEMENT": "訂閱管理",
    "DEFAULTAREANO": "預設區域編號",
    "CONTROLCHART": "管制圖",
    "ARE YOU SURE TO CLOSE LOT EXECUTION AND START INVCOUNTING": "是否確認盤點關帳",
    "RULE_ALERT": "mail警告",
    "NEXTOPNO": "下一作業站",
    "FTPROGRAMBASIS": "FT測試程式",
    "GETFROMINV": "領用",
    "LOTBASIS_MOTRANS": "生產批開立_工單轉移",
    "APPLICANT QUERY": "查詢原設定代理人",
    "SPCERFCREATE": "SPC 異常單建立",
    "SMTPALIAS": "寄件者別名",
    "PRODUCTIONSTATE": "繼續生產狀態",
    "SHOW PRODUCTION DATA": "Show Production Data",
    "IS NOT VALID VALUE": "不是有效值",
    "STD_PACKQTY": "滿箱數設定",
    "INVENTORY_FGDSTOCKIN_TP": "入庫至TipTop ERP",
    "INVENTORY_FGDSTOCKIN_WF": "入庫至WorkFlow ERP",
    "EACH10MIN": "每10分鐘",
    "SUBOPNAME": "工序說明",
    "ENG BASIS": "工程資料",
    "INVSTOCKERSTATE": "在製貨架查詢作業",
    "FILESERVICEUSERNAME": "檔案服務帳號",
    "IS NOT ALLOWED": "不允許",
    "ACCESSORYTYPEDATA": "配件類別",
    "TOTALRESIDUALLIFE": "目前總剩餘壽命",
    "ACCEPTCOUNT": "允收總計",
    "SCENARIO1": "劇本",
    "TURNTOINV": "轉庫至",
    "BUT NOT DEFINE ANY TRANSFER NODE": "但不能定義任何轉換節點",
    "EQUIPMENTSTATEQUERYBYTYPEDEF": "設備狀態監控_設備類別定義",
    "TOFIELDNAME": "To Field Name",
    "SERVER CURRENT TIME": "伺服器現在時間",
    "INV CONFIG": "庫存設定",
    "COMPREVIEW": "預覽",
    "HAVING LOT IN PRODUCTION LINE": "仍有生產批在產線上",
    "PRODUCTRUNTIMEDEF": "產品標準作業時間定義",
    "TOTALLENGTH": "總長度",
    "EAPMETHODNO": "EAP接口",
    "CARRIERSTATUS": "載具狀態",
    "MAJORINSBARCODE": "主要說明書條碼",
    "MOUNTMATERIAL": "上料",
    "INTERFACENAME": "介面名稱",
    "FIXEDQUANTITYSETUP": "設備定量保養設定",
    "IS REQUIRED": "是必需的",
    "ISNETFLOW": "是否支持部分報工",
    "CONT_MATERIAL_BYMATERIALDEF": "物料用於生產批查詢定義",
    "HEXADECIMAL": "16進位",
    "EFRAME1": "E Frame",
    "EFRAME2": "E Frame",
    "ALLOWCHANGENEXTNODE": "是否允許修改下個節點",
    "EDITCONDITIONDETAIL": "編輯條件細項",
    "WIP WAIT DISPOSITION": "等待處置",
    "SOPDETAILDEF": "標準作業程序明細定義",
    "KEYMATERIALS": "是否關鍵用料",
    "DATABASEID": "資料庫ID",
    "ANSLINECHART": "分析圖查詢結果",
    "ENG SETUP": "工程設定",
    "NEWCOMPONENTNO": "新元件編號",
    "PRODUCTION LINE": "生產線",
    "LOTSTATE_WAIT": "等待生產批查詢",
    "LOTSTATE_HOLD": "異常生產批查詢",
    "PRODUCTION TIME": "生產時間",
    "PLEASE RE-UPDATE DEVICE STATUS": "請重新檢查其他工位上該設備狀態",
    "SPECCONTROLFACTOR": "規格要因",
    "ATTRIBTYPE": "特性類別",
    "MATERIALLISTUNITTRANSFERFAIL": "用料清單單位轉換失敗",
    "ATTRIBUTES": "計數型",
    "ERROR BASIS": "不良原因基本資料",
    "ATTRIBNAME": "特性名稱",
    "WFGP4_FQCOPNO": "WFGP3&GP4 FQC檢驗單開立_作業站設定",
    "SYSTEMUPDATE": "系統更新",
    "REVERSEHISTORYDEF": "回復處理定義",
    "FREQUENCYSECOND": "Frequency Second",
    "CHECKOUTQTYOVERTHANCURQTY": "產出數量不得大於系統在製數量",
    "TONODENO": "To Node No",
    "TONODEID": "To Node ID",
    "WIP RETURN CONFIRM": "退料單確認(WIP)",
    "ONLINE PRODUCTION": "產品產能查詢",
    "FIRST NODE": "第一個節點",
    "PRODUCTBASISDATA": "產品主檔資料",
    "PRODUCTBASIS_SPK": "產品設定",
    "SELECTUSERNO": "選擇使用者",
    "GETPRDTYPE": "...",
    "TOOPNAME": "結束作業站名稱",
    "HANDLER": "Handler",
    "KERNALVERSION1": "Kernal 版本",
    "PMEQPSOPNO": "設備保養標準作業程序編號",
    "DATETIMEPERIODTYPE": "時間週期類型",
    "CODETYPE": "缺點類別",
    "MUST BE LESS THAN": "必須小於",
    "ATTACHFILE_EN": "英文表單附件",
    "STARTLINEINFO": "開線資訊",
    "MERGECARRIER": "載具併批",
    "BAD_WELD": "Bad WELD",
    "BETWEEN": "介於",
    "OPSPECITEMBASIS": "OP Spec Item Basis",
    "TOTALCAPACITY": "產能總和",
    "SELECTBRNOASNODE": "企業邏輯主檔",
    "PMWO RELEASE": "保養工單下線",
    "ECOMMON": "公用",
    "NOTICETYPE": "通知方式",
    "PMPERFORMANCEDEF": "設備保養效率查詢定義",
    "DISPATCHDATETIME": "派工時間",
    "EQPVENDORCONTACTORDEF": "設備供應商聯絡人定義",
    "GETPRODUCT": "...",
    "GETPROCESS": "取得流程",
    "QCWEEKLYOUTPUTDEF": "品管產量週報查詢定義",
    "WIPSTATEREPORT": "產品作業站現況查詢",
    "PROCESSVERSION": "流程版本",
    "STABLEQCFORM": "安定性試驗單",
    "OCAP DISPOSITION ADJUST": "OCAP異常單處置調整",
    "SAMPLINGTABLE": "抽樣表格",
    "CONTENTQTY": "內容數量",
    "APPLYTIME": "套用時間",
    "DO NOT CHOOSE ANY EQUIPMENT": "沒有選擇任何設備",
    "OBJECTLENGTH": "Object Length",
    "MUST BE THE FIRST DAY OF MONTH": "必須為一個月的第一天",
    "CHECKINCONFIRMNAME": "開始生產說明",
    "PRODUCTPACKINGRULESETTING": "包裝規則設定",
    "WAFERMAJORNO1": "刻號主碼",
    "PRODUCTSERIALRULEDEF": "產品包裝編號規則設定",
    "SC_QUERYBARCONTROLCHARTBYFACTOR": "管制圖分析_以要因查詢",
    "PRODUCTOPAMENDDEF": "產品作業站修正定義",
    "GANTTCHART": "甘特圖",
    "QCITEMATTGROUP": "計數品管項目群組",
    "REASONLEVELMEMO": "說明",
    "QUERYCHARTALLCAPABILITYBYFACTOR": "製程能力報表_以要因查詢",
    "LOTRUL​​ENO": "",
    "NOT ALLOW TO": "不允許",
    "PRODUCTINBASISDEF": "入庫單主檔定義",
    "TOPPDLINEAREANO": "歸屬生產線區域編號",
    "MERGEFUNCTION": "Merge Function",
    "QC DATA": "品管設定",
    "QC ITEM": "品管項目",
    "CANCLE CLOSE": "還原工單結案",
    "OCAPPROCESS": "OCAP 基本資料",
    "DEFECTCODE_DISCRETE": "缺點_間斷型",
    "SPLITCOMPCOUNT": "分片數量",
    "EQUIPMENTSTATECHANGEDEF": "改變設備狀態定義",
    "DISPOSITION1": "處置對策",
    "FROM RO": "從訂單",
    "THE JOB IS START MANUAL RUNNING": "這項工作開始手動運行",
    "OPERATOREXCEPTIONTIMEDETAIL": "使用者除外工時明細",
    "ISSUEGROUPBASISDEF": "簽核群組主檔定義",
    "CURRENTVERSION": "目前版本",
    "PIECESOURCE": "片段來源",
    "HAVE TO": "必須",
    "OS CONFIRM": "外包單確認",
    "SPLITCOMPONENT": "元件分片處理",
    "ISSUEJOBBASISDEF": "簽核工作定義",
    "VENDORDATA": "供應商資料",
    "VENDORNAME": "供應商名稱",
    "VENDORRISK": "供應商風險水準",
    "SEMI PRODUCT IN": "開立半成品入庫單",
    "MATERIALSELECTED": "選擇物料",
    "TOOLNAME": "工具名稱",
    "GETFILEPATH": "檔案儲存路徑",
    "FROMTABLENAME": "From Table Name",
    "GETFILEDATE": "Get File Date",
    "WIP OUT SOURCE": "WIP 外包",
    "TESTCOUNTRANK": "有N點",
    "BILLBOARD_OPSTATE_PRDTYPE": "作業站現況看板_產品類別",
    "ISUMODULE": "簽核管理",
    "QUERYCHARTSIGNBOARD": "管制圖看板",
    "TOOL INV": "配件倉",
    "RONOCANNOTCHANGE": "訂單不可變更",
    "INVSEMIINVENTORY": "半成品庫庫房資料",
    "CREATE LOT UNIT": "生產批開立_UNIT",
    "ORGMATERIALNO": "原始料號",
    "DISPATCHCUTINLOT": "派工插單",
    "SHOW EQUIPMENT STATE LOG": "Show Equipment State Log",
    "LED CONFIG": "LED 設定",
    "TAPEMATERIALLIST": "Tape物料列表",
    "STABILITYNO": "穩定性分析單編號",
    "ERFLOTMERGE_BIN": "異常單併批_等級",
    "ENGINEERGROUPNO": "管理群組",
    "QCITEM NAME": "品管項目名稱",
    "QCITEM TYPE": "品管項目類別",
    "MONO IS DIFFERENT FROM PACKCONFIG": "工單編號與包裝設定不同",
    "PMPLANCALENDAR": "保養日曆設定",
    "WIPOSUNRETURNDETAIL": "外包回貨明細",
    "SHOW EQP STATUS BY STATE": "設備現況資料查詢-狀態",
    "PLEASE SELECT A NODE": "請選取一個節點",
    "QCGROUP": "群組",
    "SELECTOPNOASNODE": "選取作業站",
    "EQUPMENTNO": "設備編號",
    "VIOLATESTATECHANGESET": "互斥狀態設定",
    "BIN BASIS": "Bin基本資料",
    "NOTALLOWTOCLOSEMO": "不允許工單結案",
    "EDIT_PS": "修改(&E)",
    "SAMPLINGPARAMETER": "抽樣計劃參數",
    "HOLD CONFIG": "異常設定",
    "QCCLASS": "ERP品管項目",
    "QCCHECK": "QC重檢",
    "QCCHART": "品管管制圖",
    "EXECUTES1": "已執行",
    "EXECUTED1": "已執行",
    "SELECTALLAREAEQP": "選取區域中的所有設備",
    "DETAILSCRIPT": "明細描述語言",
    "MO BASIS_LED_DIE": "工單開立_LED_Die",
    "MAINBINQTY": "主BIN數量",
    "QCORDER": "點檢次序",
    "ACTIVE STATE WILL SET THE STATE TO UNUSED": "已簽核狀態將改成不使用",
    "MOMATERIALLISTEDIT": "備料清單編輯",
    "IMMEDIATEWAITSET": "立即指定等待",
    "OBSOLETE DOES NOT ALLOW SPLIT QUANTITY": "作廢不允許拆分數量",
    "ENDAGENTDATE": "代理結束日",
    "DETAILSOURCE": "明細來源",
    "CHKHOST": "檢查主Host是否離線",
    "FIRST NODE OF CURRENT VERSION": "目前版本(current version)中的第一個節點",
    "ACCESSORYSTATEMONITOR": "配件狀態監控",
    "LOT PROPERTY NO": "生產批屬性編號",
    "RAW_MATERIAL OUT": "原物料-領料單",
    "MAINTENANCEITEMDEF": "預防保養項目資料定義",
    "CHECKED": "已核取",
    "CHECKIN": "進站",
    "RESULTDETAIL": "明細",
    "CHARTCONTROL": "管制圖",
    "CREATE LOT_CELL": "生產批開立_電池",
    "CREATE LOT_ASSY": "生產批開立_ASSY",
    "CREATE LOT_UNIT": "生產批開立_UNIT",
    "BIN MERGE": "Bin 併批",
    "RERUNSCRAPSTEP2": "Step2 : 請選擇重新上線流程",
    "RERUNSCRAPSTEP3": "Step1 : 請選擇重新上線不良品元件",
    "RERUNSCRAPSTEP1": "Step1 : 請選擇重新上線不良品",
    "QCLOTNO": "檢驗批號",
    "8DREPORTAUTOCLOSE": "廠內8D單-D8自動結案",
    "BIN SPLIT": "Bin 分批",
    "QCLEVEL": "檢驗水準",
    "OPERATORCLOCKOUT": "使用者登出作業(下工)",
    "DTHOSTBASIS": "DT Host 主檔",
    "ALERTEXECUTIONLOGDEF": "查詢警示執行記錄定義",
    "CHARTNO": "否",
    "NEEDBYDATE": "需求日期",
    "RELOADTIMER": "重新載入DT資料時間間隔",
    "QCITEMS": "品管項目",
    "CLOSERECORD": "結案記錄",
    "PROGRAMTYPE": "Program Type",
    "LIFTMOVE": "<",
    "WIPSTARTTIME": "起始時間",
    "PIADBASISDEF": "PIAD Basis Define",
    "PRDACCESSORY": "產品基本資料",
    "EQPCAPABILITY": "設備能力",
    "WEBSERVICEVERSION1": "WebService 版本",
    "NEWPROCESSNO": "新流程編號",
    "T_18002000": "T_18002000",
    "QCITEM ATT RULE MAP": "計數品管項目與判別法則對應",
    "FTPUSER": "FTP使用者",
    "EXECUTE LOT BY EQP": "生產批執行_設備",
    "RULEXMLSTRING": "Rule XML String",
    "TPERPPROCESSCOST": "TP ERP 製程成本",
    "THE FIRST DATA IN PROCESS": "流程的第一筆資料",
    "ENGVERSION2": "工程版本",
    "ENGVERSION1": "工程版本",
    "OPBASISDEF": "作業站基本資料定義",
    "BREAKDOWNQUERYDEF": "故障原因統計定義",
    "WARNINGRATE": "警示比例",
    "ONLINE LOTLOG": "生產歷程查詢",
    "STATE LOG QUERY BY STATE": "狀況資料查詢-狀況",
    "HISTORYDEF": "排程歷史紀錄查詢定義",
    "MUST CHOOSE ONE INSPECTION TIMING": "品管項目至少設定一個檢驗時機",
    "CATCHREPORT": "快取報表",
    "BR_L_SPLIT_GENDEF": "分批處理定義",
    "EQUIPMENTBREAKDOWNBASISDEF": "故障原因主檔定義",
    "OTHERCOST": "其他成本(C)",
    "OTHERDUTY": "Other Duty",
    "REPAIRSTARTDATETIME": "維修開始日期",
    "ROLISTRONONODENOTFOUNDORVALUEISEMPTY": "找不到訂單清單訂單編號節點或訂單編號為空",
    "SPCONLINECONTROL_TESTDEF": "SPC 量測數據收集_計量連續定義",
    "RPT_ON_PRODUCTION": "產品產能查詢",
    "PRDPACKINGRULEMAP": "包裝規則對應",
    "ACCPERIOD": "總加工時數",
    "T_22100100": "T_22100100",
    "MO MATERIAL STATUS": "工單存料現況",
    "BREAKDOWNSERIALNO": "故障序號",
    "TOQCITEM": "複製目的品管項目",
    "DO NOT NEED TO CHECK": "不需查核",
    "RETURNNODEID": "Return Node ID",
    "RETURNNO1": "退貨單號",
    "RETURNMSG": "回傳訊息",
    "RETURNACC": "下機",
    "RETURNQTY": "退回數量",
    "TOTALTIME_MIN": "總時間 (分)",
    "CUSTOM4": "自訂4",
    "CUSTOM5": "自訂5",
    "CUSTOM2": "自訂2",
    "CUSTOM3": "自訂3",
    "CUSTOM1": "自訂1",
    "CUROPNO": "目前作業站編號",
    "CURRENT": "目前",
    "CURUSED": "目前使用次數",
    "CURPASS": "目前Pass次數",
    "REPAIR BASIS": "維修項目基本資料",
    "SUBSTRING": "擷取字串",
    "SPECIFIEDSHOW": "指定",
    "CLIENTINFORMATION": "用戶端資訊",
    "ENGBASISDEF": "工程資料定義",
    "AREAINVENTORYDEFINE": "區域庫房定義",
    "NOT DEFINE": "未定義",
    "ARE YOU SURE TO EXECUTE CARRIER OUT": "你確定是否執行下載具",
    "CONDPERIODTIME": "週期時間",
    "SERIALRULEBASIS": "序號規則定義",
    "HORIZONTALNUMBER": "縱向儲位數",
    "Q_PAGEWIPINV": "線邊倉Page",
    "GWBASISDEF": "GW 定義",
    "SCRAPTURNERP_TP": "原物料報廢至TipTop ERP",
    "PCHART SIGNBOARD": "不良率管制圖看板",
    "MUST BE SELECTED": "必須選擇",
    "TRANSFERINV": "資料轉入",
    "TRANSFERBU1": "Transfer BU",
    "TRANSFERBU3": "Transfer BU",
    "TRANSFERBU2": "Transfer BU",
    "TRANSFERQTY": "移轉批量",
    "PARAMETERCLASS": "參數分類",
    "PLEASE MANUAL HANDLE ERP TICKET ON TIPTOP": "請手動至Tiptop進行單據處理",
    "WORELEASEDATE": "工單下線日期",
    "SUMMARIZED SUCCESSFULLY": "總結成功，請至結案作業中結案",
    "INVSCRDETAIL": "報廢倉明細",
    "SELECTINVENTORY": "選擇庫房",
    "OSRETURNOP": "回原流程作業站",
    "TESTOUTOFRANK": "連續M點中",
    "WIZARDSUCCESS": "成功完成",
    "RETURNTOINVSTATENAME": "歸還 狀態名稱",
    "LRR / PPM CHART": "拒收率 / 百萬不良數管制圖",
    "PARAMETERVALUE": "參數值",
    "RULESCRIPT": "法則描述語言",
    "PLEASESELECTTHEPARENTLAYER": "請選擇主階層",
    "CUSTOMERBASISDEF": "客戶基本資料定義",
    "SEARCHMATERIALINNO": "尋找進料單編號",
    "PRODUCTPACKINGRULEACCESSORYDEF": "包裝配件設定",
    "PRODUCTYIELDANDWIPSTATE": "產品作業站現況良率報表",
    "CHECKINDATE": "進入時間",
    "SAMPLING 1916": "抽樣計劃設定_1916",
    "TEMPLATE": "樣板",
    "CHECKINTIME": "開始加工時間",
    "LOCATORMANAGEMENT_IN": "上架",
    "SAMPLING PLAN": "抽樣計劃",
    "SUMOFSQUARE": "Sum Of Square",
    "IMPORT VAR MEASURE": "匯入計量檢測數據",
    "RETURNMOMATERIAL": "工單退料",
    "RULESERIAL": "Rule Serial",
    "ONLINE LOT STATE": "生產現況查詢",
    "PARAMETERSETUP": "參數設定",
    "MESSAGEXML": "訊息XML",
    "OPSPECITEMDETAIL": "OP Spec Item Detail",
    "LASTSTATUS": "最後狀態",
    "OPROLEFLAG": "作業站角色",
    "CUNITNO": "單位編號",
    "LABELDATADEF": "標籤設定定義",
    "BTNCLEAR": "清除",
    "SERIALCODEFLAGNO": "否",
    "EXPORTSTATUS": "匯出狀態",
    "EQP PM CONFIG": "設備 PM 設定",
    "PLEASE SET D4 CAUSEANALYSIS FIRST": "原因分析未建檔，請先行完成原因分析資料",
    "ENABLEYES": "是",
    "FIXED QUANTITY PM BASIS": "設備定量保養設定",
    "ABNORMALQTY": "不良現象數量",
    "WIPEQPDISPATCHDEF": "派工",
    "OQCFORMQCITEMMAP": "出貨檢驗單明細定義",
    "PARAMETER TYPE": "參數類別",
    "CONTROLNAME": "控制項名稱",
    "CONTROLPRIV": "按鈕控管",
    "CONTROLTYPE": "控制項類型",
    "CUSTOMER BASIS": "客戶基本資料",
    "CAN NOT CONTAIN OTHER RECORD": "不能包含其他記錄",
    "PRDVERSION1": "產品版次",
    "BR_L_COBATCH_GEN": "企業邏輯 - 生產批批次登錄介面(Check Out)",
    "INPUTFINISHED": "Input Finished",
    "ESTIMATEFINISHTIME": "預估完成時間",
    "DOES NOT EXIST IN PACKINGNO": "不存在於包裝編號",
    "TRANSFER": "轉換",
    "ENDQUERYDATE": "結束時間",
    "NEW PART": "New Part",
    "CARRIER STATE": "載具現況管理",
    "CREATOR": "建立人",
    "RESOURCEEDITOR": "資源編修",
    "PRDPRODUCTPARAMETER": "生產參數設定",
    "GROUP LEADER": "群組領導人",
    "FIXEMPTIME": "固定人時",
    "QCPRODUCTSPECDEF": "產品規格設定定義",
    "PRODUCT OP DEFAULT": "產品作業站預設",
    "FISRTTESTBIN": "第一次測試Bin",
    "EQPCONSUMESTATUSLOGDEF": "機台耗品歷程定義",
    "PRSAPSINTEGRATION": "APS整合",
    "ENGBASIS": "工程資料",
    "SPC DATA": "SPC 資料維護",
    "MATERIALOPTION": "用料選項",
    "INVMATERIALRETURNDEF": "開立退料單定義",
    "INVMATERIALRETURNLOG": "退料單記錄",
    "RETURNLOTCOMPCONFIRM_LED": "線上退料確認",
    "BELONGDATEEND": "歸屬日(迄)",
    "SN_P_FRONT": "棧板編碼前置字元",
    "SPLIT NOT SUPPORT BATCH WAIT DISPOSITION": "分批不支援批次等待處置",
    "UPD_FLAG": "Update Flag(外部傳入)",
    "APPROVESQL": "核准 SQL",
    "APPROVEREP": "核准參數",
    "EQP TYPE BATCH": "設備類別批次定義",
    "MATERIALTYPEQCITEM": "物料類別品管項目設定",
    "CARRIER LAYER": "載具層別",
    "BATCHOP": "批次作業",
    "BR_CL_CI_GEN": "企業邏輯 - 以載具過帳登入介面(Check In)",
    "ALERTEVENTBASISDEF": "警示事件設定定義",
    "DECLARATIONWAY": "報關方式",
    "DECLARATIONYES": "是",
    "UNKNOWSTATUS": "狀態碼錯誤",
    "HOLDDISPOSITION": "異常處置",
    "BR_CL_CO_GEN": "企業邏輯 - 以載具過帳生產登錄介面(Check Out)",
    "ANDGROUPNO": "And群組編號",
    "MOSTATEREPORT": "工單現況資訊查詢",
    "USREXCEPTIONITEMDEF": "除外工時項目基本資料定義",
    "TO SUBSTITUTIONNO": "To Substitution No",
    "L5_UNITNO": "第五層產出單位",
    "PIECELENGTH": "片段長度",
    "BARTEXT": "Bar Text",
    "EQPCAPABILITYSTATUSCOPY": "設備可用能力複製",
    "ALERTEXECUTIONLOG": "查詢警示執行記錄",
    "RMAREASON": "退貨原因",
    "BARCODE": "條碼",
    "QCCHARTSAMPLANPARAMETER": "品管管制圖與抽樣計劃參數對應",
    "FREQUENT": "頻率",
    "LOCATORINDETAIL": "上架明細",
    "RUNCARDLAYOUT": "流程卡設計",
    "RETESTLOTNO": "Retest Lot No",
    "CARRIER BASIS": "載具基本資料",
    "DAILY REPORT": "工單日報表",
    "ENGSHOW2": "顯示於工程資訊表",
    "ENGSHOW1": "顯示於工程資訊表",
    "NORMALLENGTH": "Normal Length",
    "HAVELEVEL": "是否有Bin分佈",
    "CAN NOT USE THIS FUNCTION WITHOUT CONTROL FACTOR": "無法取得品管項目之收集要因",
    "INVMATERIALADJUSTDETAIL": "庫存調整單明細",
    "ERF CREATE DATA IS NOT EXIST": "異常單建立資料不存在",
    "PROPERTYNAME": "屬性名稱",
    "COMPONENTIQC": "元件 IQC",
    "COMPONENTNO1": "元件編號",
    "FROMCREATEDATE": "從建立日期",
    "QCITEMGROUP": "計量品管項目_群組",
    "OCAPNODENO": "OCAP節點編號",
    "PLEASE CHECK OP": "請檢查作業站",
    "STARTTIMEFROM": "起始時間",
    "DATAIMPORT": "資料匯入",
    "PLEASE DECIDE LOT REPORT STATE": "請決定批報表狀態",
    "CONTROLBYPERIOD": "依週期管控",
    "NOT ALLOW TO SET UP GROUP": "不允許設定群組",
    "CARTONLABEL": "大箱標籤",
    "ENDSHPDATE": "到出貨日期",
    "EDITING FAILS": "編輯失敗",
    "LOTPROPERTYADJUSTVALUE": "生產批屬性值調整",
    "EQPBAKEPATTERN": "Equipment Bake Pattern",
    "AQLCHKFORSPLANCHG": "啟動減量檢驗之特殊程序",
    "MERGE_COMP": "併批處理",
    "NODENOTYPE": "節點編號類型",
    "PRODUCT LABEL MAP BASIS": "產品標籤對應設定",
    "CREATE ERFSHEET FAIL": "異常單開立失敗",
    "MUST CHOOSE ONE OF INSPECTION DAY AND WEEK": "請擇一選擇品檢日期設定",
    "CANCELALLAGENTSETTING": "取消所有代理人",
    "NOQCACTION": "未檢反應",
    "MESPARAMETERNO": "MES參數編號",
    "EQPSEQUENCE": "機台配置次序",
    "STARTDATETIME": "起始時間",
    "ANSPARETODETAIL": "柏拉圖明細",
    "DECIMALDIGIT": "小數位數",
    "COMPOSECOMBINEACCESSORY": "組合配件",
    "SUBSCRIBETYPESHOW": "訂閱方式",
    "CLOSESEMIWIP": "半成品線邊倉",
    "ENDMONTH": "結束月份",
    "EXPORTREPORT": "匯出報表",
    "SHIPPINGINVOICECONTENT": "出貨指示單內容",
    "QCITEMTYPE2": "品管項目類別",
    "QCITEMTYPE1": "品管項目類別",
    "8DBASISFACTORY": "8D廠內單",
    "COPYWORKTIME": "複製工作時間",
    "KEYINBETWEEN": "輸入的值須介於",
    "FINDSTRING": "查詢字串",
    "ENDDATE1": "結束日期",
    "EQPVENDORCONTACTORDATA": "設備供應商聯絡人資料",
    "BARCHARTLABEL": "長條圖(標籤)",
    "MATERIALWITHSEMI": "物料/半成品",
    "PM CONFIG": "PM 設定",
    "MTL TYPE QCITEM": "物料類別品管項目設定",
    "MODULENO1": "模組編號",
    "MODULEDEF": "模組定義",
    "MODULE NO": "模組編號",
    "PACKINGLISTDEF": "包裝清單",
    "SERIALRULESPLITLOT": "母批批號後附加新編碼規則",
    "ALLOWTIMELIMITCONTROL": "是否可進行生產時間限制管理",
    "SPC_ERFDISPOSITION": "異常單處置",
    "INLINEAG": "Inline",
    "OEEEXCEPTTIME": "除外工時(分鐘)",
    "ANSRAWDATABYLOTNO": "Lot檢測資料",
    "ECNWIZARD": "ECN 設定精靈",
    "8DREASONBASIS": "8D 原因基本資料",
    "COLLECTEDFACTOR": "已選要因",
    "QCITEM DELETE FOR VARIABLES": "刪除計量型品管項目量測記錄",
    "NOT ALLOW TO APPROVE": "不允許核准",
    "FORWARDERASSIGNED": "貨運行指定",
    "RETURNLOTCOMP_LED": "線上退料_LED",
    "VIOLATIVESTATE": "Violative State",
    "ECNSTEP3BTNNEXT": "下一步",
    "ACCSTATEPRIVILEGE": "配件狀態變更權限",
    "IPQCFORMDEF": "PQC 檢驗單定義",
    "ENDTIME1": "結束生效時間",
    "PLEASE EXECUTE PACKCONFIG FIRST": "請先執行包裝前作業",
    "SHOW CURRENT AGENT": "代理現況查詢",
    "INVMATERIALWIPRETURNBASIS": "退料單(WIP)主檔",
    "REDICLESETLAYERDEF": "層別定義",
    "CTRLCHARTANALYSIS": "管制圖分析",
    "HIDEGROUPHEAD": "隱藏群組方塊",
    "NODETYPE": "節點類別",
    "NODETEXT": "節點文字",
    "MOQTYLESSTHENRELEASELOTQTY": "工單數量少於已下線數量",
    "FIRSTDEPARTMENTDEF": "第一處理單位定義",
    "SHIPLOTQTY": "Ship Lotqty",
    "PROCESS OF PSORDER": "流程的區段次序",
    "INSPDRIVERNO": "連線程式編號",
    "RECORDTIMER": "記錄時間間隔",
    "OPQCITEM_SPK": "作業站品管項目",
    "OPQCITEMMAP1": "作業站品管項目對應",
    "SHOWBARCHART": "顯示長條圖",
    "EDIT LANGUAGE": "編輯語言",
    "PRODUCTTYPEDEF": "產品類別定義",
    "USER DEFINE": "使用者定義",
    "IQC FORM FOR COMPONENT": "進料檢驗_元件",
    "IMPORT_QCITEM_VARIABLESDEF": "計量品管項目匯入定義",
    "INVSEMIINBASISDEF": "半成品進料單主檔定義",
    "RECIPEVERSION": "參數版本",
    "PMI_QCITEMGROUPDEF": "計量品管項目群組_減項定義",
    "TOLOTQTY": "To 數量",
    "CALCULATETYPE": "彙整方式",
    "WIPCOMPTURNBASIS": "轉庫主檔資料",
    "WIPSTAGEDAILYREPORT": "客戶產品作業站現況查詢",
    "SPCONLINECONTROL_TEST": "SPC 量測數據收集_計量連續",
    "ETDATAIMPORT": "客戶基本資料匯入",
    "PAYMENTTERMS": "付款方式",
    "USEREVENTLOGDEF": "事件記錄定義",
    "ALLOWCHANGE": "是否允許修改",
    "SUMVALUE": "Sum Value",
    "ONLINE CYCLETIME": "產品生產週期查詢",
    "ECNSTEP6DESCRIPTION": "工程變更完成",
    "EQPREPAIRREGISTER": "設備修復登錄",
    "END DATE": "結束日期",
    "ININVNUM": "入庫量",
    "EQUIPMENTSTATEISPRODUCTION": "設備狀態變更為生產，請選擇生產批。",
    "RELEASEDEPARTMENT": "結案部門",
    "INVENTORY1": "在庫",
    "ERPTRANSACTIONLOG": "ERP交易記錄",
    "AREASHOWWIP": "設備狀態監控_區域",
    "AREASHOWEMS": "設備狀態監控_區域",
    "AREASHOWDEF": "設備狀態監控_區域定義",
    "PRD RECIPE BASIS": "產品參數群組",
    "INSPMACHINEPARAMETERDEF": "檢測儀器基本資料定義",
    "PCS_ERRORCOLLECT_COMPONENT": "PCS Error Collect Component",
    "UNITTRANSFERFAIL": "單位轉換失敗",
    "CANNOTBEEMPTY": "不允許為空",
    "ALERTEVENTBASIS": "警示事件設定",
    "PRDEQPCONSTRAINT": "禁用設備",
    "SAVEGRAPH2": "存圖",
    "LOTQTYADJUST_COMP": "生產批數量調整(元件)",
    "L6_UNITNO": "第六層產出單位",
    "RELATIONRANK": "關係",
    "RUNCARDDESIGNER": "流程卡設計工具",
    "PRODUCTION STATE BY AREA": "設備狀態監控_區域",
    "EQPPROPERTYDATA": "設備屬性資料",
    "CAN NOT BE THE FUTURE TIME": "不能為未來時間",
    "CONT_PLANFINISHTIME_BYLOT": "生產批預計完工時間查詢",
    "OPTIONDATA": "Option Data",
    "NEWVALUE": "新數據",
    "SPLIT COMPONENT": "分片處理",
    "MATERIALLISTCHECKLOTNODIFFERENT": "用料清單批號控管不一致",
    "QCITEMGROUPMAP": "品管項目群組對應設定",
    "QCITEMGROUPDEF": "計量品管項目_群組定義",
    "ISSUE CONTROL FORM": "簽核控制來源",
    "DOWNGRADE": "Down Grade",
    "ONLINE1": "在線",
    "REMAINPERIOD": "剩餘時間",
    "YIELDREPORTDETAIL": "良率明細",
    "TOOLDEFINE": "工具定義",
    "UNIONERFSHOW": "共同開立異常單",
    "AGENTUSERNO": "代理人編號",
    "FROM RULENO": "From Rule No",
    "MULTIITEMNO": "項次",
    "UNITBASISDEF": "單位設定定義",
    "HAS BEEN CHANGED": "已改變",
    "OS CREATE": "外包單開立",
    "YIELDREPORTDEF": "產品作業站良率查詢定義",
    "ERFMULTIPLEHOLD": "ERF是否可使用多重Hold處理",
    "RPT CONFIG": "報表設定",
    "NEWLOTNO": "新批號",
    "PROCESSBASISDEF": "流程基本資料定義",
    "HORIZONTAL": "水平顯示",
    "ARRIVETIME": "到達時間",
    "PACKINGLEVELNAME": "包裝階層名稱",
    "INVENTORY_FGDSTOCKIN_T100_CANCEL": "取消入庫 T100 ERP",
    "NEWERFNO": "新異常單編號",
    "TRANSTYPE": "轉換方式",
    "TRANSDATE": "移轉日期(外部傳入)",
    "ONLY CAN DEFINE ONE PASS LINK": "only can define one Pass link",
    "INVCOUNTOPEN": "盤點開帳",
    "CREATE SHIPPING": "開立出貨單",
    "SUBCONTRACTOR": "外包商基本資料",
    "FAILURE ACCUMULATE": "異常與不良統計",
    "PMRELEASESTATENAME": "保養工單下線狀態說明",
    "NO DATA TO EDIT": "無資料可修改",
    "PLEASE RE-PROOFREADING THE SERVER TIME": "請重新校對伺服器時間",
    "ISSUESTATE FAIL": "簽核狀態非「已核准」，不允許上架",
    "THIS NO HAD BEEN VERIFIED": "此資料已有驗證",
    "SMTPPORT": "SMTP Port",
    "SMTPINFO": "SMTP 資訊",
    "ERFFACTOR": "異常單原因",
    "INVSTOCKERDATE": "入儲位時間",
    "ENG DATA": "工程資料",
    "VIOLATIONID": "Violation ID",
    "ONSHORE": "國內",
    "MODULES STAGE DEFINE NOT FOLLOW THE SEQUENCE": "模組的製造層別定義未依照順序",
    "ALLOCATETOOP": "撥轉作業站",
    "OSCONFIRMED": "已出貨",
    "STAGE BASIS": "製造層別設定",
    "FIXEDTIMESDEF_EQP": "設備定次定時保養設定",
    "DEPARTMENTBASIS": "部門基本資料",
    "ABNORMALNO": "不良現象編號",
    "PRDVERSION": "產品版次",
    "ENGLISH": "英文",
    "ENGCODE": "工程碼",
    "ENGSHOW": "顯示於工程資訊表",
    "COMPONENTNO": "元件編號",
    "AUTOSPLITDATACHANGE": "分批變更資料規則",
    "ENDCODE": "結束代碼",
    "ENDDATE": "結束日期",
    "ENDTIME": "結束時間",
    "OP_SYSFLOW": "作業站管理",
    "DEL BATCH LOT": "批次刪除以下·š生產批",
    "ANSLINEBARCHART": "分析圖查詢結果",
    "ALLOCATEQTY": "分配數量",
    "STABLEQCFORMNO": "安定性試驗單編號",
    "WSERP_E10ICDSETTINGERROR": "找不到E10ICD相關整合設定資訊或整合設定資訊有誤",
    "ENGRECIPEAPPROVE": "核准工程參數",
    "IS NOT EXIST IN": "不存在於",
    "ENGINEERGROUPDATA": "工程群組資料",
    "ENGINEERGROUPNAME": "工程群組名稱",
    "ENGINEERGROUPUSER": "工程群組-使用者",
    "SUBSTITUTIONGROUPDEF": "備品群組資料定義",
    "SUBSTITUTIONVENDORMAPDEF": "備品供應商對應定義",
    "OPERATORNO": "作業人員編號",
    "CALLEDPRODUCTVER": "產品版本",
    "EQPTYPEBREAKDOWNMAP": "設備與故障原因對應",
    "LOAD FAIL": "載入失敗",
    "MAXINPUTQTY": "Max Input Qty",
    "NOTFINISHALLMAINTAIN": "尚未完成所有保養，配件狀態仍為保養狀態",
    "CLOSEUSERNO": "結案人",
    "QCSETTINGBYOBJECT": "品管項目設定",
    "TREEVIEW": "樹狀檢視",
    "BR_LB_SPLITBYRULE_FT": "分批處理 - 等級(by Rule)",
    "PRS DATA IMPORT": "流程資料匯入",
    "ORIVENLOT": "原廠批號",
    "ORIVENDOR": "原廠製造商",
    "RECEIVESETTING": "DT接收資料時間設定",
    "ROPROPERTYDEF": "訂單屬性定義",
    "MES PARAMETER": "MES參數",
    "DEPARTMENTSNAME": "部門簡稱",
    "EQPSERIALNO": "設備序號",
    "WP_8DPRECAUSIONTRACKDEF": "預防措施追蹤資料定義",
    "PRINTERNO": "印表機編號",
    "WAFERGRADEPRIORITYDEF_LED": "Wafer Life Grade優先權設定",
    "PRINTINFO": "請在日曆簿上按滑鼠右鍵，可選擇預覽或列印出保養計畫，另外也提供使用這字型選擇列印格式功能",
    "ENTRYOP": "進入點",
    "ENCODING": "編碼",
    "ENTRUST": "客託倉",
    "ERFCREATE": "異常單開立",
    "EQPRECIPEDETAILDEF": "設備參數明細定義",
    "MUST BE USED FIRST": "應先被使用",
    "AUTMODULE": "自動執行",
    "PLEASE INPUT AN INTEGER TO SET GROUPNUMBER": "組數設定請輸入整數",
    "LOWERCONTROL": "下限單邊管制",
    "OLDSAMPLEPLAN": "轉換前抽樣計劃",
    "LOTRANGE": "批的範圍",
    "LOTRERUN": "生產批重新上線",
    "FACTORORDER": "Factor Order",
    "WIP WAIT QUERY": "等待查詢",
    "COMPONENTCOUNT": "總片數",
    "LOTSTATE": "生產批狀態查詢",
    "LOTSTAMP": "生產批執行標記",
    "DECOMPOSESELECT": "拆解選項",
    "NCTIONORDER": "順序",
    "IS GREATER THAN OR EQUAL TO": "大於等於",
    "BR_LB_CI_FT": "企業邏輯 - 測試登入介面(Check In)",
    "BR_LB_CO_FT": "企業邏輯 - 測試生產登錄介面(Check Out)",
    "STOCKERSTATE": "在製貨架查詢作業",
    "LOTQUERY": "生產批查詢",
    "PRDSOPFILEMAINTAIN": "指導書維護",
    "INSPDATE": "Insp Date",
    "UNRELEASE QTY": "未下線數量",
    "INSPTYPE": "檢測類型",
    "INSPTIME": "檢驗日期",
    "TEMPLATEFLOWBR": "預設樣板",
    "MACHINE_8D": "設備",
    "INSPWEEK": "每週檢日期",
    "IPQC FORM": "PQC 檢驗單",
    "BRRUNCARD_GENERALDEF": "列印流程卡定義",
    "UNRELEASEDERF": "未解除異常單清單",
    "MUST SELECT FACTOR VALUE": "必須選擇要因值",
    "ACTUALSTARTDATE": "實際生產日",
    "EQUIPMENTSTATEMONITOR": "設備狀態監控",
    "FACTORYNAME": "工廠名稱",
    "L6_SOPPATH": "第六層指導書路徑",
    "FGDIN_TP": "",
    "FGDIN NO": "成品入入庫單編號",
    "PUTINPLACETYPE OF MATERIALNO": "物料的投料點",
    "ACCESSORYREPAIR": "配件壽命維護調整",
    "RERUN_FAILBIN": "重新上線_無效等級",
    "LOTBASIS": "生產批開立",
    "AQL SAMPLEQTY": "AQL抽樣數量",
    "LOTBASISDEF_ENTRUST": "生產批主檔定義_Entrust",
    "EDIT_MULTI": "Multi 修改",
    "COMPONENTSTATE": "元件狀態",
    "LOTCOUNT": "批數",
    "SAMPLINGFOR2NDINSP": "二次檢驗抽樣計畫",
    "PRODUCTSPECBASIS": "Product Spec Basis",
    "STOCKERBASIS": "在製貨架基本資料",
    "LOAD QCITEM CHART DATA FAILED": "讀取品管管制圖失敗",
    "EQCSAMPLERULE": "電信(EQC)抽樣規則",
    "PMWO COMPLETE": "保養工單完成與回報",
    "RETICLE SET VERSION": "Reticle Set Version",
    "EQUIPMENTSTATELOGBYSTATEDATA": "依狀態查詢設備狀態記錄結果",
    "LOTPOSITION": "生產現況",
    "COPYFROMOTHERPRODUCT": "複製自其它產品",
    "SPC INSPECTION MACHINE": "SPC 檢測機台",
    "PMWOHISTORYDEF": "保養工單歷史資料查詢定義",
    "CHKHOSTTIMER": "檢查主Host是否離線時間間隔",
    "FACTORVALUE": "要因值",
    "LOTANDOP": "生產批+作業站",
    "NONE DEFINE START NODE": "找不到START Node",
    "EVERYYEAR": "每年的",
    "EVERYWEEK": "每週的",
    "EVERYHOUR": "每小時的",
    "RPT_CATCH": "快取報表",
    "INVENTORY_FGDSTOCKIN_E10ICD": "入庫至E10ICD ERP",
    "REFERENCEWORKTIME": "參考工作時間",
    "STOCKERINOUT": "上下架",
    "ACCESSORY STATE": "配件狀態",
    "BUSINESSRULENO": "企業邏輯編號",
    "JOBSERIALNO": "工作序號",
    "STABLEQCFORMDEF": "安定性試驗單定義",
    "LOTINBOX": "目前小箱資訊",
    "ONECHARTYMWCAPABILITYALL": "區間製程能力圖表",
    "MUSTHAVEVALUES": "必須要有值",
    "SHIPPINGDEFINE": "出貨基本資料定義",
    "LOTLIMIT": "最小批量限制",
    "MATERIALADJUSTDETAIL": "庫存調整單明細",
    "SETTEMPLATE": "樣版設定",
    "AUTOSPLITDETAIL": "分批明細",
    "WIPCHKPASSWORD": "生產批過帳檢查密碼",
    "CONTENTTYPE": "內容類型",
    "INVFGDINVENTORYDEF": "成品庫庫房資料定義",
    "INKBAKEPATTERN": "INK Bake Pattern",
    "DEFAULTSERVER": "預設伺服器",
    "LOTPROPERTYNO": "生產批屬性編號",
    "ACCLOTQTYN": "有N筆允收",
    "QC ITEM RULE": "品管項目法則",
    "AUTORUNLOG": "排程執行紀錄",
    "CREATOR1": "建立人",
    "CREATOR2": "建立人",
    "ANSFISHBONE": "魚骨圖",
    "DATAPROPERTY": "資料屬性",
    "MMODULENO": "模組編號",
    "NODEFUNCTIONDEF": "系統程序主檔",
    "VAR_MEASURECONTINUOUS": "計量值量測數據(連續)",
    "ISSUESTATECHANGEDEF": "更改簽核狀態定義",
    "OPERATIONNAME": "作用名稱",
    "MO-DIFFERNNCE BETWEEN PLAN REAL": "工單-計畫與實際差異",
    "RPT_PANEL": "",
    "NONEEDTOCOLLECTMATERIALUNITNO": "不需收集部件序號",
    "SYSTEMADDPOINT": "系統補點",
    "SHIFTBASIS": "班別基本資料",
    "SOPSERIALNO": "標準作業程序序號",
    "ATTORDERQCGROUP": "計數群組",
    "FACTORYBASISDEF": "工廠基本資料定義",
    "INPUTSEMIPRODUCT": "輸入半成品",
    "INCOMINGQCFORM": "進料檢驗單",
    "INPUTQTY": "輸入數量",
    "INPUTLOT": "投入批數",
    "ELEMENT": "特性",
    "APPLYSTATE": "使用狀態",
    "PRODUCTCHANGEUPDDETAIL": "產品變更同步調整細節",
    "CHECKSUMPERIOD": "校正週期",
    "ARE YOU SURE TO RELEASE ALL SELECTED RECORDS": "您確定要下線所有選擇的資料",
    "ORDERVERSION": "Order Version",
    "NODEGROUPDATA": "節點群組資料",
    "WAIT DISPOSITION": "等待處置",
    "FUNCTIONORDER": "Function 順序",
    "MERGEFAILBIN": "合併無效等級",
    "EQPTYPE SOP BASIS": "設備保養標準程序",
    "RPT_ON_YIELD": "產品良率查詢",
    "BANKDATE": "Bank Date",
    "ONLY BUSINESS RULE NODE CAN SET PHASE": "只有商業邏輯節點可以設定階段",
    "LEDPROGRAMBASIS": "LED BIN表設定",
    "LOT BASIS EDIT": "生產批基本資料修改",
    "AUTORELOAD": "自動重新載入",
    "OP NODE GROUP BASIS": "節點群組",
    "CLEARCARRIER": "清空",
    "PLEASE SET D5 DISPOSITION FIRST": "處置對策未建檔，請先行完成處置對策資料",
    "REDLIGHTCANOUTPUT": "紅燈，平行站點有殘餘量，可產出",
    "LINKEDIT": "修正連結",
    "LINKNAME": "連結名稱",
    "EXECUTESTATESHOW": "執行狀態",
    "EQUIPMENTSTATELOGBYSTATE": "設備歷史資料查詢_狀態",
    "LINKTYPE": "連結方式",
    "AXISLABEL": "顯示X軸資訊",
    "LINEARNO": "線性分析單編號",
    "SELECTED QCITEM COUNTS EXCEED LIMIT": "所選擇的品管項目數量超過限制",
    "QCDAILYOUTPUT": "品管產量日報查詢",
    "ISSUEJOBDETAIL": "簽核工作明細",
    "RELEASEMEMO8D": "結案說明",
    "8DACTIONDATA": "行動對策資料",
    "SPLIT MERGE DRAW": "分併批歷程圖",
    "GOSCRAPINV": "入不良品庫",
    "SAVETOPROPERTYNO": "存入至屬性",
    "TIMEINTERVAL": "時間區間",
    "BONDYES": "是",
    "SEARCHMATERIAL": "尋找物料",
    "BOOLEAN": "布林值",
    "RULETYPESHOW": "法則類別",
    "LOT SPLIT": "分批處理",
    "CATCH LOT LOG": "快取_生產歷程查詢",
    "SPLITQTY": "分批批量",
    "SPLITBIN": "分批Bin",
    "SPLITLOT": "分批子批",
    "FUTUREWAITSETDEF": "預先等待設定定義",
    "LOTATTRIBUTE2": "生產批特性",
    "CUTINORDER": "插單順序",
    "SHIPINVOICEDATE": "Ship Invoice Date",
    "EQPTYPE": "設備類別",
    "EQPTIME": "設備工時",
    "PRODUCTSERIALNO": "產品序號",
    "SEARCHSTART1": "擷取碼數(起)",
    "BUSINESSRULEBASIS": "企業邏輯設定",
    "WP8DQUERY": "8D矯正單查詢",
    "INSPECTIONMACHINEPARAMETERDATA": "檢測儀器資料",
    "COMDATETIMESELECT": "日期時間選取",
    "RETESTLOTSHOW": "重檢批",
    "FGD PRODUCT IN LOG": "成品入庫單記錄",
    "LABEL DATA": "標籤設定",
    "FIXEDTYPESHOW": "頻率類別",
    "MUST START WITH": "開頭必須是",
    "OBINQTY": "庫存量",
    "IV_INVENTORY_RAW_SPLIT": "退冰作業(膠)",
    "OBJECTX": "Object X",
    "OBJECTY": "Object Y",
    "STANDARD_COMPONENTNO": "標準",
    "OBJTYPE": "Obj Type",
    "ENGCODE_S": "工程碼",
    "FIXED-TIMES": "Fixed Times",
    "ENDINPUTDATE": "到庫房入庫日期",
    "LOTPROCESS": "生產批流程",
    "NODENOTYPESHOW": "節點編號類型",
    "CPKGOAL": "CPKGOAL",
    "HANDCARRYFLAG": "手提運送",
    "LINE CHART ANALYSIS": "彙整分析圖",
    "ABNORMAL TYPE": "不良現象類別",
    "COMPLETEQTY": "完工數量",
    "ORGINALBIN": "原始Bin分佈",
    "PHASE NODE CANT DRAW LINK": "階段節點不能畫連結",
    "ORDERBYMETHOD": "Order By Method",
    "REASONSUBTYPE": "原因子類別",
    "SAMPLINGPLAN": "抽樣計劃",
    "INIFILEVERSION1": "INI 檔案版本",
    "ARRANGELEFT": "對齊左方",
    "WIPOSUNRETURN": "外包回貨",
    "TRENDCHART": "趨勢圖",
    "SAMPLING1916": "抽樣計劃設定_1916",
    "DECLARATIONNO": "否",
    "ACCESSORYCATEGORYSTATEBASISDEF": "配件分類狀態定義設定定義",
    "QCITEMATTORDERGROUPDEF": "計數品管項目_群組定義",
    "WP8DCLOSE": "8D矯正單結案作業",
    "EQPDAILYREPORTDEF": "設備稼動查詢定義",
    "OPQCITEMMAP": "作業站品管項目對應",
    "STATETYPESHOW": "狀態類別",
    "ENGINEERGROUPBASIS": "工程群組主檔",
    "SHOWLOSSDATA_FGDSTOCKIN_WF": "入庫至WF顯示遺失數大於0的資料",
    "OPQCITEMV": "作業站品管項目(計量)",
    "OPQCITEMG": "作業站品管項目(群組)",
    "OPQCITEMA": "作業站品管項目(計數)",
    "ACCEPTNOTREPAIR": "接受 (不須維修)",
    "CATCHTABLE": "快取資料表",
    "INCOMINGSTATUS": "進貨月報明細表",
    "BR_LC_CI_GEN": "企業邏輯 - 元件生產登入介面(Check In)",
    "BR_LC_CO_GEN": "企業邏輯 - 元件生產登錄介面(Check Out)",
    "ISSUESTATEDETAILCHANGEDEF": "線上簽核流程更改",
    "LOCATIONNO": "儲位編號",
    "EQPBREAKDOWNANDREPAIR": "設備故障及繼續生產",
    "USREXCEPTIONITEM": "除外工時項目基本資料",
    "ADDITIONALXML": "加入XML",
    "INVENTORY_RAW_SPLIT": "物料分批處理",
    "LOT MERGE": "併批處理",
    "ERPFLAG": "ERP拋轉狀態",
    "ERPNAME": "ERP名稱",
    "EQP BREAK DOWN REGISTER": "設備故障登錄",
    "ERP_PWD": "ERP密碼",
    "ERP_ORG": "營運中心代碼",
    "ALREADY CREATE": "已建立",
    "BRSPC_FAI": "SPC品管項目挑選_首件檢驗",
    "BRLCMERGERULE": "併批規則: 相同站點、相同產品、相同BR、相同狀態、相同目前單位",
    "TUESDAY": "星期二",
    "WIP DATA IS NOT ENOUGHION": "",
    "LABELBASIS": "產品標籤主檔",
    "ERRORNO": "不良原因編號",
    "INVENTORYCLASSSHOW": "庫房分類",
    "MCLASSIMPORT": "主分類匯入",
    "SCRAPINVENTORYNO": "損壞庫房",
    "STATUS SIGNBOARD": "現況看板",
    "PLEASE REMOVE PASS LINKS OUT FROM SELECTED NODES": "請在已選擇節點移除\"PASS\"連結",
    "LOCATOROUT": "下架",
    "LOCATORNO1": "儲位",
    "UNPACKING": "包裝拆解",
    "LOCATOR NO": "儲位編號",
    "LOP1FROM": "亮度-起",
    "SAVELAYOUT": "儲存設計",
    "ONE CHART YMW CAPABILITY": "區間製程能力管制圖",
    "CURRENTUSECOUNT": "目前使用次數",
    "MESISSUEMOMATERIAL": "MES發料",
    "OSCONFIRM": "外包出貨",
    "IMPORTXLS": "偏流測試機",
    "IMPORTTXT": "匯入txt檔",
    "IMPORTCSV": "匯入csv檔",
    "IMPORTBIN": "Bin別匯入",
    "INSPMECHINE BASIS": "檢測設備",
    "CHECKNECESSARY": "必選條件",
    "FGD_FGD IN": "成品-入庫單",
    "SIGNBOARD OF OUTPUT YIELD": "產出與良率看板",
    "SAVETOLOTPROPERTYNO": "存入至屬性",
    "SUBSCRIPTIONREPORT": "報表訂閱",
    "EQPMAINTENANCEPLANHISTORY": "保養計畫歷史資料查詢",
    "SPC LOTQCLIST": "SPC待檢清單",
    "NO DATA TO EXPORT": "無資料匯出",
    "REASON NAME": "不良原因名稱",
    "STATUS REPORT": "現況報表",
    "BR_LB_CIEQC_GEN": "企業邏輯-電信(EQC)抽樣規則登入_等級",
    "8DFACTORY": "廠內8D單",
    "NOTCONTROL": "無管制",
    "TURNQTY": "移轉數量",
    "TURNINV": "轉庫",
    "TURNOFF": "關閉",
    "TURNEQP": "轉機台",
    "TURNERP": "轉ERP",
    "BR_ELECTROSTATICBINDING": "靜電箱選取",
    "TUSBAR1": "Tusbar",
    "THE MODULE ALEARDY DEFINE DEFAULT PROCESS": "模組已經定義預設流程",
    "ENDDATETIME": "結束時間",
    "IS NOT EQUAL TO": "不等於",
    "RERUN_SCRAP_COMP": "重新上線_不良品元件",
    "ERFTYPE": "異常單來源",
    "LASTREFRESHTIME": "上次重新整理時間",
    "ERFDATA": "異常單資料",
    "ERFDISP": "異常單處置",
    "LABELVALUE": "標籤值",
    "TRANSACTION": "交易",
    "ERFINFO": "異常單資訊",
    "BINDATA": "Bin 基本資料",
    "SUPPLEMENT": "後記補述",
    "LABELPRINT": "標籤列印",
    "ERRORCOLLECT_COMPONENT": "不良原因收集_元件",
    "ISSUEFORMDEF": "簽核控制表單定義",
    "LABELPIECE": "片段",
    "CLASSIFYRESULT": "分類結果",
    "IMMEDIATEHOLDSETBASIS": "立即異常設定主檔",
    "LIMITSINFO": "界線資訊",
    "MOBILENO": "手機號碼",
    "FROMOTHERQTY": "From Other Qty",
    "BILLBOARD_OPOUTPUTSUMMARY_GAUGEDEF": "作業站時段產出_良率儀表板定義",
    "RELATIONTABLENAME": "關連資料表名稱",
    "PS BASIS": "生產區段資料",
    "COPYFROM": "複製來源",
    "PS ORDER": "區段順序",
    "COPYTYPE": "複製類別",
    "INVSFINDETAIL": "半成品入庫單明細",
    "HISTOGRAMPARAMETER": "直方圖參數",
    "CATCH TEST": "快取_查詢測試",
    "ERFPARETO_FISHBONE": "異常單柏拉圖分析-魚骨圖",
    "ISSAMPLESIZEINTEGER": "樣本數是否為整數",
    "INVCOUNTADJUST": "盤點調帳",
    "PREORDERBASIS": "預訂單主檔",
    "BIGLOCATOR": "大架位",
    "OUTSOURCING_INFO_PROCESS": "外包單資訊設定作業",
    "BR_U_BATCHCO_GEN": "企業邏輯 - 批次生產登錄介面(Check Out)",
    "CONSUMESEQ": "耗品序號",
    "CHECKING ADDRESS IS 15": "請檢查位址是15",
    "BR_U_BATCHCI_GEN": "企業邏輯 - 批次前置作業介面(Check In)",
    "ASSIGNSAMPLEQTY": "指定抽樣數量",
    "AUTOSPLITDETAILDEF": "分批明細定義",
    "FUNCTION NAME": "函式名稱",
    "COLLECTIONDATE": "資料收集日",
    "INVMATERIALADJUSTLOGDEF": "庫存調整單紀錄定義",
    "SYSTEM SETUP": "系統設定",
    "EXPORTED": "已匯出",
    "EXPORT_1": "外銷",
    "PLEASE CHECK ISSUE STATE": "請檢查簽核狀態",
    "NOT DEFINE EQUIPMENT PROPERTY": "設備屬性未定義",
    "SERIALTYPE": "序號類別",
    "_EMS_EQPCAPMAPPING": "設備能力設定",
    "SERIALRULE": "序號規則",
    "CREATELOTQTY": "預設自動開立生產批數量",
    "ERFOBJECT": "異常標的",
    "PERCENT1": "%",
    "STATION_COLLECT_SN_PROCESS": "工位機序號收集",
    "SHIPPINTDATE": "出貨日",
    "SYSTEM TABLE": "系統資料表",
    "BYQCITEM": "依品管項目",
    "AUDIOANS17": "音頻分析儀(17)",
    "EQP REAL TIME REPORT_EMS": "設備現況查詢",
    "ERFRECORDQTY": "異常發生數量",
    "ALERTEVENTID": "警示事件編號",
    "STDUNITRUNTIME": "標準作業時間",
    "BRERFCREATE": "企業邏輯 - 異常單開立介面",
    "PRIORITY1": "優先權",
    "INV DATE": "入庫時間",
    "ATTACHFILE_CHTSHOW": "繁中表單附件",
    "SAMPLINGPLANNO": "抽樣計劃編號",
    "HAS BEEN COMPOSED TO": "已經組合至",
    "MATERIALNONOTEXIST": "替代料編號不存在",
    "PACKING_MOLINE LABEL PRINT": "包裝標籤補列印",
    "PRDOPCAPITEMINFO": "產品-設備能力項目維護",
    "ISSUESTATECHANGE": "更改簽核狀態",
    "USER CONFIG": "使用者",
    "GETQCITEMNO": "...",
    "RO PROPERTY BASIS": "訂單屬性設定",
    "SAMPLEPLANCHANGEDEF": "抽樣計劃轉換定義",
    "THERE IS STILL A LOT IN THE ELECTROSTATIC BOX THAT HAS NOT BEEN CHANGED": "AND IT IS NOT ALLOWED TO TRANSFER FACTORY",
    "IMMEDIATE HOLD SET_BATCH": "批次立即異常設定",
    "RETRUNZERO": "歸零",
    "SHIPPINGFLAG": "是否可出貨",
    "ATTACHFILE_CHSSHOW": "簡中表單附件",
    "QCSPECDETAIL": "品管項目規格明細",
    "SHIPPINGDATE": "出貨日期",
    "SEQUENCE2": "次序",
    "SEQUENCE1": "次序",
    "IS BOOLEAN": "NOT ALLOW TO SET MIN OR MAX VALUE",
    "NOT ALLOW TO CANCLE CLOSE MO": "不允許還原工單結案",
    "CANT DEFINE DETAIL": "無法定義明細",
    "NP-CHART": "NP-Chart",
    "MULTIOPERATOR": "是否啟動多人加工",
    "PRODUCTEQUIPMENTSPEC": "產品設備規格設定",
    "ABNORMALSTATE": "不良現象現況",
    "PLEASE SELECT A QCFORM AND A QCITEM RECORD": "請選擇檢驗單與品管項目資料",
    "COMPONENT MERGE": "元件併批",
    "USER DEFINED REPORT": "使用者定義報表",
    "SUBSCRIPTIONNAME": "訂閱名稱",
    "MONTHRPTCODEBASIS": "管制圖月報表編碼",
    "CONNECTIONSTATE": "連結狀態",
    "RETURN_REASON": "驗退原因",
    "IPQCFORMQCITEMMAP": "PQC檢驗單明細定義",
    "SPC_ERFUNRELEASEDDEF": "未解除異常單定義",
    "EQPSTATECONTROLSETDEF": "設備狀態控制設定定義",
    "CHARTSTATUS": "管制圖狀態",
    "COMCHKUSER": "使用者登錄",
    "APPROVEDATE": "核准日期",
    "QCSPECCOPY": "品管項目規格全部複製",
    "PRODUCT_INFO_GET": "品號資訊取得",
    "ERFHANDLE": "異常單即時處置",
    "EXECUTEVERIFICATION": "執行與驗証",
    "CHANGEPASSWORDFIRSTTIMELOGIN": "使用者必須在下次登入時變更密碼",
    "OPERATORLOG": "登錄歷史記錄",
    "CALHOLDTIME": "Hold 時間",
    "WIPEQPDISPATCHQUERY": "手動派工查詢",
    "ABNORMALBASIS": "不良現象主檔",
    "QCITEMPARAMETER": "品管項目參數",
    "EXECUTEPROGRESS2": "執行進度",
    "EXECUTEPROGRESS1": "執行進度",
    "EQP_MTTRSUMMARY_TRENDCHART": "設備MTTR統計表_趨勢圖",
    "PRS BASIS": "流程基本資料",
    "WAFER MAP DATA QUERY": "全點分佈表查詢",
    "PRODUCTVERSION_MO": "工單產品版本",
    "LOADPORTYES": "是",
    "LOADPORTPOS": "上貨區位置",
    "MATERIALSUBSTITUTE": "替代料",
    "OPSPECITEMBASISDEF": "OP Spec Item Basis Def",
    "PIECEDATA": "片段資料",
    "SAMPLINGTABLECOPY": "表格複製",
    "ATTRIBSOURCE": "特性來源",
    "ADJUST QUERY": "異動查詢",
    "MODEFINE": "工單定義",
    "ISNETFLOWNO": "否",
    "MODELNO1": "型號",
    "MODELETE": "工單刪除",
    "CALLEDPRODUCTNAME": "產品名稱",
    "INTERNAL": "內部執行",
    "PLEASE KEYIN VALID LOTNO": "請輸入有效之生產批編號",
    "AUTOMATIC": "自動",
    "COMPONENT SPLIT": "元件分批",
    "HOLDREASON": "異常原因",
    "ISSUESTATEDEF": "簽核明細列表",
    "ABNORMALKEYIN": "不良現象輸入",
    "SHOWNOTCOMPLETE2": "只顯示未完成",
    "SHOWNOTCOMPLETE3": "只顯示未完成",
    "SHOWNOTCOMPLETE1": "只顯示未完成",
    "SHOWNOTCOMPLETE4": "只顯示未完成",
    "RELOADSETTING": "重新載入DT資料時間設定",
    "NODISPATCHDATA": "上無任何派工資料",
    "PRODUCTOPBUSINESSRULE": "企業邏輯",
    "EQP STATE STATISTICS": "設備狀態期間統計",
    "TOTAL ERFREASON QTY": "總異常原因數量",
    "QCITEMFORVARIABLESDEF": "計量品管項目定義",
    "GETEQUIPMENTTYPE": "...",
    "PRIVILEDGE": "權限",
    "FUTUREOSSET": "預先外包設定",
    "ILLEGALSN": "不符規則之序號",
    "IMPORT FILE IS FAIL": "檔案匯入失敗",
    "AUTOCHECK": "Auto Check",
    "AUTOCLOSE": "自動結案",
    "OBJECTFILEFORMDEF": "系統物件對應表定義",
    "ADJUSTREASON": "調整原因",
    "ATTRIBSCRIPT": "特性描述語言",
    "AUTOEMAIL": "自動發送郵件",
    "PRODUCTION REPORT": "生產相關報表",
    "ALLOWDIFFMOMERGE": "不同工單允許併批",
    "SPLITDATACHANGERULE": "資料變更規則",
    "LINEUSERSET": "生產線別使用者設定",
    "ENABLENO": "否",
    "TRACKER": "追蹤者",
    "TRANSID": "交易編號",
    "OS DETAIL": "外包單明細",
    "FILE IS ALREADY EXIST": "COVER IT",
    "NODATAMODIFIED": "無任何資料異動",
    "MODULENO": "模組編號",
    "MODULEID": "模組ID",
    "COMPONENT QUANTITY": "Component Quantity",
    "UNRELEASEQTY": "未下線數量",
    "PRODUCTMATERIALNO": "品號",
    "SMDPDLINEPOSITIONBASISDEF": "工位基本資料定義",
    "ERRORBASISDEF": "不良原因基本資料定義",
    "TRIBSEQUENCE": "特性順序",
    "LOTBASISDEF_EPITAXY": "生產批主檔定義_Epitaxy",
    "QCDEFECTCODEBASIS": "Defect Code設定",
    "DELBATCHLOTDEF": "批次刪除已下線生產批定義",
    "AREA INVENTORY DEFINE": "區域庫房",
    "QUERYBARCONTROLCHART": "管制圖分析",
    "SPCQCFORMQCITEMMAP2": "檢驗類型",
    "CREATE AGAIN": "確定再次建立",
    "MTLPUTINPLACE": "發料點",
    "NOT A EMPTY CARRIER YET": "已不是空載具",
    "DBSPLITQTYNO": "DB Split Qty No",
    "CALLEDSRVVER": "指定服務版本",
    "REASONBASIS": "品質原因基本資料",
    "ERFPARETO_QUERYDEF": "異常單柏拉圖分析定義",
    "BOTTLEQTY": "瓶數",
    "SELECTGROUPNO": "選擇群組編號",
    "DISCONNECT": "離線",
    "REASONCLASS": "不良類型",
    "OFFLINE": "Off Line",
    "MESSAGEQUEUETYPE": "訊息列類別",
    "EQUIPMENT SATE": "設備狀態",
    "QCOBJECTTYPE": "檢驗標的類別",
    "RELATIONO": "趨勢",
    "RELATIONL": "關係",
    "RELATIONS": "關係",
    "RELATIONV": "關係",
    "ADD CONDITON OP": "新增條件式作業站",
    "QUERYDATAEDITLOGDEF": "資料修改記錄定義",
    "SCRINDETAILDEF": "不良品入庫單明細定義",
    "FTPPASSWORD": "FTP密碼",
    "RUNCARD RFID": "Run Card Rfid",
    "TRANSACTION STATE": "交易狀況",
    "SHOW  USER AGENT": "代理人顯示",
    "CHANGEROUTING": "變更流程",
    "REASONNAME1": "原因名稱",
    "ENDBRNO CAN NOT BE CHECKIN": "結束企業邏輯不可為Check In",
    "INITIALFLAG": "起始狀態",
    "MSAMEASUREDATABASIS": "MSA 量測資料",
    "COAANDSPCDATASHOWNAME": "出貨報告",
    "UPDATETIME": "更新時間",
    "UPDATETYPE": "更新方式",
    "REASONLEVEL": "原因等級",
    "UPDATEFLAG": "Update Flag",
    "UPDATEDATE": "Update Date",
    "VALUERANGE": "值的範圍",
    "ADJUSTSERIAL": "調帳序號",
    "IMPORT_VARMEASUREDATADEF": "匯入計量檢測數據定義",
    "PRODUCTNAME": "產品名稱",
    "PRODUCTLINE": "產線",
    "PRODUCTMEMO": "Product Memo",
    "PRODUCTINNO": "入庫單編號",
    "PRODUCTINFO": "產品資訊",
    "PRODUCTCODE": "產品簡碼",
    "PRODUCTSPEC": "Product Spec",
    "PRODUCTTYPE": "產品類別",
    "SAMPLINGFOR2NDINSPDEF": "二次檢驗抽樣計畫定義",
    "UNIT DEFINE": "單位定義",
    "SYSFUNCTIONCONTROLDEF": "表單控制項設定定義",
    "SHIFTEXCEPTIONTIME": "班別預設除外工時",
    "OVERDUETIME": "逾時",
    "OBJECTSEQUENCE": "物件次序",
    "QUERYMNTHVARCHARTRPTDEF": "管制圖月報表定義",
    "QCITEM SELECT": "品管項目選擇",
    "SUMMARYDESCRIPTION": "總結說明",
    "MAJORMEMBERDISPOGROUP": "主要處理異常群組人員",
    "FILEFORMATE": "檔案格式",
    "ERFLOTSPLIT": "異常單分批",
    "BR_LC_PAGESPLIT_LED": "Page分頁處理",
    "REDICLESETNO": "Redicle Set 編號",
    "REASONTOTAL": "Reason Total",
    "COMPONENT ATTRIBNO": "元件特性編號",
    "ERFLOTMERGE": "異常單併批",
    "QCWEEKLYOUTPUT": "品管產量週報查詢",
    "INVSCRIN": "不良品入庫",
    "CARRIERCHANGE": "載具狀態切換",
    "EQP STATE CONTROL SETTING": "設備狀態控制設定",
    "DTMONITOR_TCPIP": "DT 監控器",
    "FULL_CARTONQTY": "滿大箱箱數",
    "QC SETUP": "QC設定",
    "COUNTWAY": "計量方法",
    "COUNTQTY": "統計數量",
    "OPFORQCBASIS": "品管作業站",
    "MATERIAL PREORDER LOG": "預訂單記錄",
    "CYCLENO": "圈別編號",
    "ACCESSORYSTOCKIN": "入庫作業",
    "EVERY SHIFT": "每個班別",
    "DISPATCHSTATE": "派工狀態",
    "SELECTEDSTATE2": "已選取狀態",
    "TPERPCANCHOOSEFGDINV": "不良品入庫時允許選到良品庫房編號",
    "ACCREPAIRQTY": "目前累計維修次數",
    "OCAP NO": "OCAP 編號",
    "AUTOREDTCONNECT": "自動重新連線",
    "ALLOWREVERSEALONE": "允許單筆還原",
    "ARCHIVECONFIGDEF": "封存設定定義",
    "QCRULEBASIS": "計量品管法則基本資料",
    "UPPERLIMIT": "Upper Limit",
    "USING AFTER THE VERSION OF WINDOWS SERVER 2008": "如是使用Windows Server 2008之後版本",
    "EQPNOTAVAILABLE": "設備狀態為不可使用",
    "EVENTID": "事件編號",
    "INVCOUNT": "盤點",
    "SAMPLERULE_FAB": "FAB抽樣規則",
    "BR_L_CO_MOTRANS": "企業邏輯 - 工單生產登錄介面(Check Out)",
    "INVADDR2": "發票地址2",
    "INVADDR1": "發票地址1",
    "RELEASEEQP": "釋放設備",
    "RELEASEALL": "全數下線",
    "RELEASEQTY": "下線數量",
    "RELEASER8D": "結案人",
    "QC CHART": "QC Chart",
    "INSPMACHINETYPENAME": "檢測儀器類別名稱",
    "DESLOCATORNO": "目標儲位",
    "INSPMACHINETYPEDATA": "Inspection Machine Type Data",
    "8D REASON BASIS": "8D 原因基本資料",
    "NOTALLOWTOPRINT": "無法列印",
    "BATCHLOT": "生產批",
    "ADDRESS": "地址",
    "SHORTRUNSERIAL": "Short Run Serial",
    "EQUIPMENTSTATELOG": "設備狀態記錄查詢",
    "DISPATCHBASIS": "設備派工處理",
    "INCOMINGQCFORMCOMPONENT": "進料檢驗_元件",
    "SELECTMATERIALOUTDETAIL": "選擇退料單明細",
    "INVINQTY": "入庫數量",
    "RECEIVEUNITNO": "接單單位編號",
    "IS LESS THAN": "小於",
    "SPCQCFORM_PQC": "PQC檢驗單",
    "SPCQCFORM_OQC": "OQC檢驗單",
    "SPCQCFORM_IQC": "IQC檢驗單",
    "SPCQCFORM_FQC": "FQC檢驗單",
    "BYLOTNUM": "依批數",
    "BYLOTQTY": "依批量分批",
    "DISPATCHORDER": "派工順序",
    "OCAPBASISDEF": "OCAP基本資料定義",
    "CHANGEEQPSTATUS": "改變機台狀態",
    "SHOW MO MATERIAL": "查詢工單用料",
    "ISSUE STATE QUERY": "簽核現況資料查詢",
    "DEFAULTINVSHOW": "預設",
    "ISSUESTATEDEFDEF": "簽核狀態查詢定義",
    "ERPWSURL": "ERP Web服務網址",
    "AUTORPTMONTHVARCHART": "自動寄送計量型報表",
    "CAN NOT LOGOUT WHILE MODULES ARE RUNNING": "不允許於模組執行中進行登出",
    "ADDMATERIAL": "手動新增",
    "LOTHISTORY": "生產批歷程及現況查詢",
    "CHART YMW CAPABILITY": "區間製程能力報表",
    "EXTERNAL": "外部執行",
    "PERFORRATE": "產能效率",
    "S_OFFLINEHOLD": "檢驗異常自動暫停生產批",
    "FIXED SAMPLE SIZE": "固定抽樣數量",
    "FIXED SAMPLE RATE": "固定抽樣比率",
    "HOLDITEMIMPORT": "異常原因匯入",
    "MM/DD OUT": "MM/DD Out",
    "AGENT SET": "使用者代理人設定",
    "ENTOSITEM": "外包項目設定",
    "AGENTDATE": "代理結束日",
    "DECLARATIONFLAG": "是否報關",
    "ERP_USER": "ERP使用者名稱",
    "IMPORTLEDTESTDATA": "匯入LED測試資料",
    "ERP_NAME": "ERP名稱",
    "ERP_LANG": "ERP語系",
    "TRANSACTIONID": "交易編號",
    "TRANSACTIONNO": "Transaction No",
    "INSPPECTIONDATE_E": "檢驗日期迄",
    "INSPPECTIONDATE_S": "檢驗日期起",
    "ALREADY HAS CARRIER LOT CANT STOCKON": "已經放置載具，故無法放置生產批",
    "LOTBASIS_NETDEF": "生產批開立_網狀製程定義",
    "INSPMACHINE DRIVER": "檢測機台連線程式",
    "DEFAULTINV": "預設",
    "SHPUSERNO": "出貨人員",
    "MATERIALADJUSTBASISDATA": "調整單主檔資料",
    "MOLEADTIMEAVG": "工單平均L.T.",
    "EXECUTE LOT_EQP": "生產批執行_設備",
    "EX_MOCOMP1": "EX_MOCOMP1",
    "EX_MOCOMP2": "EX_MOCOMP2",
    "TX_NAME": "Transaction Name",
    "STARTBRNO AND ENDBRNO MUST BE N/A BOTH OR NOT BE N/A BOTH AT THE SAME TIME": "開始及結束企業邏輯必須同時為N/A或皆不為N/A",
    "ISSUESUBJECT": "簽核主旨",
    "CANTNOTGET": "取不到",
    "FORMATDATA": "格式資料",
    "ERP FAIL": "ERP失敗",
    "PLEASE SELECT A SOP WHICH YOU WANT TO CREATE": "請選擇一個欲建立的SOP",
    "ERP T100": "ERP T100",
    "工单作业站资源检视": "",
    "PRODUCT VERSION CHANGE": "產品版本變更",
    "PRDESOPBASISDEF": "產品-eSOP設定",
    "OPERATORCLOCKOUTDEF": "使用者登出作業(下工)定義",
    "PASSWORD HAS EXCEED THE VALID DATE": "密碼超過有效期限",
    "THE PART SERIAL IN THE RTF FILE IS NOT AGREE WITH THE LOTNO": "找不到此生產批所對應的資料",
    "PRD PACKING RULE BASIS": "包裝規則設定",
    "ECNSTEP6BTNNEXT": "完成",
    "MERGEOPTIONSHOW": "是否併回",
    "ISAUTOSTOCKINYES": "是",
    "SHORTCUT": "快捷鍵",
    "NEW PASSWORD": "新密碼",
    "OVERLAPS OTHER RECORD": "與其他記錄重疊",
    "PLEASE EXECUTE CHECK IN EQP FIRST": "請先執行上機",
    "BYDEFECTRATE": "依比率",
    "PLANFINISHTIME_BYLOTDEF": "預計完工查詢定義",
    "BRSPC_IPQC": "SPC品管項目挑選_巡檢檢驗",
    "SHOWGRID": "顯示格線",
    "SHOWNAME": "附加欄位",
    "SHOWOCAP": "OCAP異常原因",
    "SHOWMSG3": "顯示訊息",
    "SHOWMSG1": "顯示訊息",
    "SHOWWAIT": "顯示等待資訊",
    "SHOWTYPE": "顯示類型",
    "QUERYSCATTERCHARTDEF": "散佈圖分析定義",
    "OUTLINE_SYSFLOW": "功能程序總覽",
    "RELEASEDATE8D": "結案日",
    "GROUPPRIV": "群組權限",
    "GROUPTYPE": "群組類別",
    "GROUPUSER": "群組-使用者",
    "GROUPNAME": "群組名稱",
    "FQC FORM": "終檢檢驗單",
    "BAUDRATE": "傳輸速率",
    "DOCUMENTNAME": "文件名稱",
    "DOCUMENTGET1": "擷取",
    "DOCUMENTGET2": "擷取",
    "DOCUMENTGET3": "擷取",
    "ABNORMALPOSITIONDEF": "不良現象位置定義",
    "DISABLED_LOTNO": "停用",
    "DOCUMENTPATH": "文件路徑",
    "DOCUMENTTYPE": "單據類型",
    "MATERIALDETAIL": "物料明細",
    "TOOLUSEDDETAILDEF": "已使用工具明細定義",
    "ALREADYCREATEDANDRELEASEDLOTCANNOTRETURN": "已開立生產批且已下線,不可退料",
    "BR_L_SPLIT_GEN": "分批處理",
    "BR_L_SPLIT_GEM": "分批處理",
    "EQUIPMENTLOTSTATEDETAIL02_SINGLE": "檢視生產批資訊",
    "ISSENDDPM2ERPYES": "是",
    "FUTUREWAITSET": "預先等待設定",
    "FINALBINSTATE": "最終Bin分佈",
    "DISABLED_ERFNO": "停用",
    "OCAPPROCESS1": "處理流程",
    "L1_SOPPATH": "第一層指導書路徑",
    "SHOW ISSUE LOG": "簽核記錄查詢",
    "FLOWDRAW": "系統建模",
    "FLOWNAME": "程序名稱",
    "RUNCARDQUERY": "補印流程卡",
    "AREASHOWWIPDEF": "設備狀態監控_區域定義",
    "MATERIALLOTNO_INV": "料批",
    "RECIPE TEMP BASIS": "Recipe 樣版基本資料",
    "OEEWORKTIME": "一日工時(分鐘)",
    "DEFECT CODE BASIS": "缺點基本資料",
    "CARRIERSTATE": "載具現況管理",
    "UNEXECUTED1": "未執行",
    "EQUIPMENTGROUP": "設備群組資料",
    "EQPOEESUMMARY": "整體設備效率(OEE)",
    "PACKING_MOLINE": "包裝作業",
    "RUNCARDLABEL": "Run Card Label",
    "RETESTLOT1": "重檢批",
    "RETESTLOT0": "首檢批",
    "USER DEFINE AQL": "自定義AQL",
    "EQUIPMENTCLASS": "設備分類",
    "RETESTTIME": "Retest Time",
    "RPT_CATCHALL2": "快取報表",
    "RETEST LOT": "重檢批",
    "DUPLICATE DATA": "資料重複",
    "IS NOT LOT OR CARRIER": "不是載具或生產批",
    "CARRIERTYPE1": "載具類別",
    "CARRIERTYPE2": "載具類別",
    "MONTHLY CHART REPORT CODE": "管制圖月報表編碼",
    "CALTYPESHOW": "彙整方式",
    "INVSEMIINVENTORYDEF": "半成品庫庫房資料定義",
    "INVENGINEERGROUPBASISDEF": "庫房工程群組定義",
    "EQUIPMENTBASIS": "設備基本資料",
    "BARCODEAREA": "刷卡區",
    "CHECKOUTRELEASE": "生產完成",
    "CHARTTITLE": "管制圖標題",
    "PRINT FAIL": "列印失敗",
    "CHARTSTATE": "管制圖狀態",
    "MUST FILL IN THE REASON FOR MODIFICATION": "須填寫修改原因",
    "CARRIERLAYER": "載具層別",
    "RUNCARDBASIS": "流程卡設定",
    "MOTYPE BASIS": "工單類別設定",
    "SILICONPARTID": "Silicon Part Id",
    "CARRIERBASIS": "載具基本資料",
    "MEASUREFEATURE": "量測物特性",
    "CLEARBACKGROUND": "清除背景",
    "DRAW CHART FAIL": "繪圖失敗",
    "CHARTWIDTH": "顯示圖寬度",
    "MOBASISDEF_LED_WAFER": "工單開立_LED_Wafer",
    "PSPRIVILEGE": "產品區段設定權限",
    "ERRORQTY": "不良數量",
    "ERRORLOG": "錯誤記錄",
    "MSABASIS": "量測系統分析",
    "MAINTAINPLANSETUP": "保養計畫設定",
    "CUSTODIAN": "保管人",
    "EQUIPMENTSTATE": "設備狀態",
    "REVERSETOREVERSEID": "還原至還原編號",
    "ABOUTME": "關於 MESSeries",
    "EXECUTINGFILELIST": "Executing File List",
    "LOTOPAREACHANGEDEF": "生產批作業區變更定義",
    "TIMEUNIT": "時間單位",
    "TIMESTEP": "時段",
    "BINDELETRICBOX": "綁定靜電箱",
    "SELCOMPONENT": "",
    "SYSFUNCTIONDATA": "系統功能",
    "CORR INV": "CORR庫",
    "INSPECTIONMETHOD": "檢查方法",
    "CSCRAPUCL": "C-Chart Scrap 管制上限",
    "CSCRAPQTY": "損壞數",
    "CSCRAPLCL": "C-Chart Scrap 管制下限",
    "UNDISTRIBUTEQTY": "UnDistribute Qty",
    "UNSELPRODUCT": "待挑選產品",
    "VERIFYDATE": "驗證日期",
    "BECAUSE THERE ARE": "因仍有",
    "THE STRING LENGTH OF DEFAULT VALUE MUST MORE THAN MIN VALUE": "預設值之字串長度必須>=最小長度",
    "OPENUSERNO": "OP EN User No",
    "CONTROL CHART ANALYSIS": "管制圖分析",
    "QCATTRULEMAPDEF": "計數品管項目判別法則對應定義",
    "ADJUSTDATA": "調帳資料",
    "ADJUSTDATE": "調帳時間",
    "BILLBOARD OPSTATE_PRODUCTNO": "作業站現況看板_產品",
    "QCINSPECTIONDETAIL": "設備品檢管理設定明細",
    "ACCESSORYTYPEDATAIMPORT": "配件類別資料匯入",
    "EXCLUDEOP": "除外作業站",
    "WAFERSELECT": "挑片",
    "USERAGENTSHOWDEF": "代理人查詢定義",
    "WIPLOTQTYADJUST_PARTIAL": "生產現況調帳作業",
    "ISSENDDPM2ERP": "入庫是否拋DPM",
    "PUTINPLACENO": "投料點編號",
    "EXPORTTIME": "滙出時間",
    "LOT QTY ADJUST PARTIAL": "生產現況調帳作業",
    "EQP REALTIME REPORT": "設備現況查詢",
    "IMMEDIATE HOLD SET": "立即異常設定",
    "SHIPPINGNO": "出貨單編號",
    "GOODUNITNO": "Good Unit No",
    "ACCESSORYISSUEMATERIAL": "發料作業",
    "CONT_COMPMATERIAL_BYCOMPDEF": "元件使用物料查詢定義",
    "DISPOSITIONSN": "矯正行動次序",
    "DISPOSITION8D": "矯正行動",
    "DELETEPROPERTY": "刪除屬性",
    "PRODUCT OUTPUT MONTH": "產品入庫月報明細查詢",
    "WAITINGAPPROVE": "待簽核",
    "PQC_INFO_GET": "PQC檢驗單資訊取得",
    "FROMTIME": "起始時間",
    "HWBINNO": "Hardware_Bin",
    "FROMBRNO": "開始企業邏輯編號",
    "FROMBUNO": "From BU No",
    "FROMDATE": "開始日期",
    "FROMDAYS": "起始日",
    "FROMOPNO": "開始作業站",
    "FROMNODE": "From Node",
    "FROMNAME": "From 名稱",
    "SHOW EQP LOG": "設備歷史資料查詢",
    "PROJECTNO": "專案代號",
    "SHIPADDR": "出貨地址",
    "SHIPDEST": "出貨目的地",
    "PROPERTYNONODENOTFOUNDORVALUEISEMPTY": "找不到工單屬性屬性編號節點或屬性編號為空",
    "ROPROPERTYBASIS": "訂單屬性設定",
    "SHIPPACK": "出貨明細",
    "SHIPPING": "開立出貨單",
    "ERROR URL FORMAT": "URL格式錯誤",
    "PERCENTAGE": "Percent Age",
    "RECYCLEDFLAG": "Recycled Flag",
    "CONTROLCHARTXLSSOURCEFILE": "管制圖匯出樣板",
    "FROM RMA": "從退貨",
    "REVESEDESCRIPTION": "還原原因",
    "TOACTIVE": "已簽核",
    "DIRECTION": "方向",
    "INVLOCATORBASIS": "儲位基本資料",
    "RESPRODUCT GROUP": "產品負責群組",
    "PHASEOUT": "已淘汰",
    "PHASEDEF": "階段定義",
    "BEFORE EXECUTEDATE": "執行日期之前",
    "ECNSTEP1BTNNEXT": "下一步",
    "SHOWSOPDETAILBYITEM": "顯示明細(By Item)",
    "WINFORMVERSION": "WinForm 版本",
    "ACCESSORYBASISDATA": "配件主檔資料",
    "AGENTOF": "授權代理者",
    "PRODUCTNONOTEXIST": "產品編號不存在",
    "WSINVENTORYNO": "在製品庫房編號",
    "SPLITSTARTCODE": "分批起始碼",
    "CORPSECRET": "微信授權碼（Secret）",
    "ALERTBASISDEF": "警示資料設定定義",
    "TEXTCOLOR": "文本顏色",
    "CLAERCACHE": "清除應用程式暫存",
    "SET USER AGENT": "代理人設定",
    "SHOWWELCOME": "歡迎畫面",
    "COMMITSTATE": "鎖定還原狀態",
    "WFERPOUTSOURING": "WF ERP 託外進貨",
    "THESAMEERPRELATIONERPNOMUSTBECHECK": "ERP有相關連單據",
    "EQPTYPE BREAKDOWN MAP": "設備與故障原因對應",
    "BR_L_MERGEBYRULE_GEN": "併批處理 (by Rule)",
    "ACCESSORYREPAIRDATA": "維修項目",
    "SHIFTDEF": "班別定義",
    "OFFLINEG": "Offline",
    "OFFLINEA": "Offline",
    "OFFLINEV": "Offline",
    "PRODUCT PROPERTY": "產品屬性",
    "DOWNLOADFILE": "下載附件",
    "SCLASSIMPORT": "次分類匯入",
    "SYSTEMFUNCTIONDEF": "系統功能定義",
    "GETSQLFILE03": "檔案",
    "GETSQLFILE02": "檔案",
    "GETSQLFILE01": "檔案",
    "GETSQLFILE05": "檔案",
    "GETSQLFILE04": "檔案",
    "LOWERLIMIT": "Lower Limit",
    "CAPABILITY": "可用能力",
    "RPT REPORT GROUP": "報表群組基本資料",
    "PLEACECHECKBREXIST": "請檢查BR資料是否存在",
    "ERROR LOG": "錯誤記錄",
    "MULTIOPER": "Multi Oper",
    "QCOBJECTNO": "檢驗標的編號",
    "MULTIVIEW": "Multi 檢視",
    "MULTIUSER": "多人加工",
    "ERRORTYPE": "不良原因類別",
    "ERRORRATE": "不良比率",
    "ERRORMORE": "更多資訊",
    "ERRORNAME": "不良原因名稱",
    "ERRORITEM": "Defect項目",
    "DEDUCTION": "扣除",
    "PRODUCTPACKINGSETCOPY": "產品裝箱設定-複製到其他產品",
    "COMPONENTPROPERTYBASIS": "元件屬性設定",
    "PLEASE MAINTAIN OP PSNO FIRST": "請先維護作業站區段",
    "SELECTEDEQPDISPATCHNOTMATCH": "選擇的設備與派工設備不同",
    "BYPS_LOTNO": "依不同區段編碼",
    "ACCSREPAIRNO": "配件維修單編號",
    "SHOW ALL AGENT": "顯示所有代理人",
    "OPABNORMAL": "不良現象",
    "CAN NOT INCLUDE1": "不能包含",
    "CONT_ATTRIB_ADJUSTVALUE_COMP": "元件特性值調整",
    "OPMATERIALSTATE": "作業站存料現況查詢",
    "APPLYEQPACCESSORY": "配件領用",
    "OPQCITEMDATAISNULL": "請將此品管項目加入作業站！",
    "SCENARIONAME": "劇本名稱",
    "EXPRESSIONCOLQTY": "輸入欄位數量",
    "SCENARIODRAW": "劇本繪製",
    "EQUIPMENT STATE QUERY BY AREA": "依區域查詢設備現況",
    "PICTUREFOLDER": "檢驗圖面路徑",
    "EQUIPMENT STATE QUERY BY TYPE": "依類別查詢設備現況",
    "OSRETURN": "外包回貨",
    "HOLDDESCRIPTIONDEF": "異常說明定義",
    "TIMERSETTING": "時間設定",
    "INV BASIS FOR INV": "庫房基本資料",
    "OFFSHORE": "國外",
    "LEDTESTDATASPECDEF": "LED 測試資料過濾標準定義",
    "SAMPLING1916DATA": "抽樣計劃設定資料_1916",
    "PRDOPDEAFULT_EXECUTEMETHOD": "產品作業站預設功能的執行方式",
    "CUSTOMERNO": "客戶編號",
    "SHIPCUSTOMERNO": "出貨客戶編號",
    "HANDCARRYNO": "否",
    "BILLBOARD TIME_STEP BASIS": "產出看板時段主檔",
    "TOTALWORKTIME": "總工作時數",
    "EQPACCSTATECONTROLSET": "配件狀態控制設定",
    "DISPLAYLEGEND": "圖例顯示",
    "DISPATCHCUTINLOTDEF": "派工插單定義",
    "FQCFORMDEF": "終檢檢驗單定義",
    "PROCESS DATA IMPORT": "流程資料匯入",
    "SHOWPROPERTY": "顯示屬性",
    "AUTOSPLITRULEDEF": "自動分批規則定義",
    "REASONPRDSOPFILEPATH": "產品原因指導書路徑",
    "EXCEPTIONDIALOG": "MESSeries 程式發生錯誤",
    "ISSUESTATEDETAILCHANGE": "線上簽核流程更改",
    "OPCONTROLRULEDATA": "作業站管制法則資料",
    "CCOLUMNNAME": "欄位名稱",
    "SOURCEPRODUCTNO": "來源產品編號",
    "TICKETNO": "單據編號",
    "OPENSTATUS": "啟用狀態",
    "MAINTAINNO": "維護方式編號",
    "ALARMMAILNO": "否",
    "SCRAPSTOCKIN_E10ICD": "不良品入庫至E10ICD ERP",
    "INSP MACHINE SETUP": "檢測儀器設定",
    "DOCFILENAME": "文件檔案名稱",
    "DOCFILEPATH": "文件檔案路徑",
    "FILESERVICETYPE": "檔案服務類型",
    "WIPSWRBASISDEF": "特殊生產需求維護定義",
    "FILESERVICEHOST": "檔案服務主機",
    "ORGPRIORITY": "Org Priority",
    "STAGENAME": "製造層別名稱",
    "STAGETYPE": "製造層別類型",
    "TRADITIONALCHINESE": "繁體中文",
    "PRIVOPTIONSHOW": "權限選項",
    "PSSEQUENCE": "PS Sequence",
    "OSITEMNO": "外包項目編號",
    "EQPMAINTENANCEPLANADJUST": "保養計劃變更",
    "FIRST DEPARTMENT": "第一處理單位",
    "ARE YOU SURE TO DELETE SELECTED NODE": "你確認要刪除選擇的節點",
    "VERIFIER": "驗證人",
    "NOT ALLOW TO ABORT": "不允許中止",
    "DELOPRECIPE": "刪除作業站參數",
    "INVPREORDERDETAILDEF": "預訂單明細定義",
    "REASONPRDSOPFILEMAINTAIN": "品質原因產品指導書維護",
    "PRODUCTOPDESCRIPTION": "作業站說明",
    "OPTCUSTOMERLOTNO": "客戶批號選項",
    "NOT ALLOW TO CLOSE": "不允許結案",
    "FREQUENCYNAME": "頻率名稱",
    "CONFIG FILE": "設定檔",
    "VERTICAL": "垂直顯示",
    "DELAYMOTOTAL": "延遲開工單數",
    "SAMPLINGPLANDEF_WAFER": "抽樣計畫定義_元件",
    "CREATETEAM8D": "D1團隊建立",
    "MESSAGEQUEUEBASIS": "訊息佇列基本資料",
    "QCCHARTBASIS": "管制圖內容",
    "INVOKE FAIL": "叫用失敗",
    "EXCEPTIONITEMNO": "除外編號",
    "EACHNSEC": "每N秒",
    "PM PLAN HISTORY": "保養計劃歷史資料查詢",
    "SUGGESTION": "建議",
    "NOT ALLOW": "不允許",
    "CREATEDATE_MO": "工單建立日",
    "PLEAE SET GENERAL LINK FIRST": "請先設定General Link",
    "PRINTCOUNT": "列印張數",
    "MOTYPE  NAME": "工單類別名稱",
    "LOADEQPACCESSORY": "上模作業",
    "PRINTLABEL": "列印標籤",
    "WP8DMAINTAIN": "8D 矯正單維護作業",
    "NOT FOUND": "找不到",
    "EQUIPMENTSPECBT": "設備規格",
    "MLTHICKNESS": "Mlthickness",
    "THE NUMBER OF CHARACTER": "字元數",
    "WEBSERVICEVERSION": "WebService 版本",
    "LOAD DATA FAIL": "讀取資料失敗",
    "REPAIR ITEM": "維修項目",
    "SHOWEQPSTATECOLOR": "顯示設備狀態顏色",
    "SUBSTITUTIONVENDORCONTACTOR": "備品供應商聯絡人",
    "IS NOT THE SAME": "不一致",
    "CARRIER TYPE": "載具類別資料",
    "QCITEMFORATTRIBUTESDEF": "計數品管項目定義",
    "VAREMPTIME": "變動機時",
    "PMSOPNAME": "標準作業程序名稱",
    "HAVECOMPONENT": "是否有元件",
    "UNIONERFIS0": "整合模式下,群組品管項目必須共同開立異常單！",
    "TIMESTEPDATA": "時段資料",
    "TIMESTEPNAME": "時段名稱",
    "COMPONENTS": "元件",
    "DEFECT_QTY": "報廢數量",
    "DEFECTCODE": "缺點代碼",
    "SCENARIOEXECUTESTEP": "劇本執行階段",
    "EQUIPMENTSELECT": "選擇設備",
    "BELONGDATE": "所屬日期",
    "RMA_COMPONENTSELECT": "退貨單元件選擇",
    "BELONGTONO": "所屬編號",
    "EXPIRED": "已到期",
    "ELEMENT DEFINE": "特性定義",
    "EXPLAIN": "?",
    "ERPWORKRPT_SUMMARY": "報工單拋轉彙整資料",
    "UNSELECTEQUIPMENTS": "未選之設備",
    "LOCATORMOVE": "轉移",
    "QCCOMPLETEQI": "檢驗單品管項目清單",
    "LOCATORNAME": "儲位名稱",
    "LAGTIMEDIFFERENCE": "剩餘等待時間",
    "LOCATORTYPE": "貨架類型",
    "CALENDARID": "行事曆編號",
    "AUTOMOAPPROVE": "是否自動執行工單核准?",
    "WIPSCRAPCOMPONENT": "損壞_元件",
    "SQLCMDID": "資料指令編號",
    "REDICLESETVERSION": "版本",
    "FINALDISPOSITION": "最後處置",
    "RESOURCEQUREY_BYMO": "工單耗用資源檢視",
    "BARWIDTH": "Bar寬度",
    "SCRAPSTATENAME": "報廢 狀態名稱",
    "INVSEMIINDETAILDEF": "半成品進料單明細定義",
    "MATERIAL ADJUST LOG": "庫存調整單記錄",
    "ADJUSTUSERNO": "調帳人員",
    "P-CHART": "不良率管制圖",
    "EQP CAP BASIS": "設備能力項目設定",
    "EQP_MTTRSUMMARYDEF": "設備MTTR統計表定義",
    "SPLITMERGE_DRAW": "分併批歷程圖",
    "INCOMINGQCFORMQCITEMMAP": "進料檢驗單明細定義",
    "RETICLE SET CONFIG": "配件組定義",
    "ADDARCHIVEDATABASE": "新增封存資料庫",
    "EQP OEE SUMMARY": "整體設備效率(OEE)",
    "PROCESSTYPEDEF": "流程類別資料定義",
    "8DANALYSISDATA": "原因分析資料",
    "TEMPLATEDL": "下載樣版",
    "TEMPLATENO": "樣板編號",
    "EQPCAPABILITYSTATUS": "設備能力",
    "NOTSHOW_M": "不顯示",
    "NOTSHOW_A": "不顯示",
    "RECIPETEMPBASIS": "Recipe 樣版基本資料",
    "AUTOREPORT XLS SOURCE FILE CONTROL": "自動寄送報表匯出樣板",
    "HOLDDISPGROUP": "異常處理群組",
    "ERPWORKREPORT CANCEL_T100": "取消報工單_T100",
    "MASTERSCRIPT": "主資料描述語言",
    "MATERIALADJUST": "調整單",
    "QUERYUSEWILDCARD": "可使用萬用字元\"%\"查詢",
    "EXAMPLE": "範例",
    "BRRUNCARD_GENERAL": "列印流程卡",
    "FACTORYNO": "工廠編號",
    "NOTEMATERIALLOT": "Note Material Lot",
    "QADESCRIPTION": "驗證描述",
    "EXENODE": "執行節點定義",
    "EXECUTE": "執行",
    "NOTCLOSE": "未結案",
    "SECTIONNO": "位置",
    "EQP_MTTRSUMMARY_BYMONTHDEF": "設備MTTR統計表_以月份匯總定義",
    "TEXT DATA": "量測值",
    "RPT_ON_OPLOTQTY": "作業站生產現況查詢",
    "SYS UPDATE": "系統更新檢查",
    "BARCHART": "長條圖",
    "8D QUERY": "8D 矯正單查詢",
    "PRODUCTINPUT_MONTH": "Product Input Month",
    "SITE WORK TIME DEFINE": "廠區工作時曆定義",
    "SERIAL MAX ADJUST": "序號調整",
    "NOTEQUAL": "<>",
    "NOT ALL THE COMPONENT WAS SELETED TO NEW CARRIER": "元件未全部選取至參考批載具上",
    "AUTOREPORTNAME": "自動寄送報表名稱",
    "CAUSEANALYSIS": "原因分析",
    "DESCREASERATE": "折損率",
    "THIS MONTH": "本月份",
    "LABELSOFTWARE": "標籤軟體",
    "SITE WORK TIME": "廠區工作日曆",
    "INVMATERIALADJUSTDETAILDEF": "庫存調整單明細定義",
    "PREOPENDTIME": "PreOp End Time",
    "REFRESHFREQUENCY": "更新頻率",
    "LEDPROGRAMBASISDEF": "LED BIN表設定定義",
    "ZH-HANT": "繁體中文",
    "ZH-HANS": "簡體中文",
    "CLIENTVERSION": "用戶端版本",
    "ALARMONTIME": "警告聲長度",
    "SEMIOUTBASISDATA": "半成品出庫單主檔資料",
    "QCITEMFACTOR": "品管項目要因",
    "EXEFUNCTION": "執行函數",
    "COMDEFAULTVALUESELECT_COMP": "元件特性-預設值選取",
    "TESTCOUNTVR": "有N點",
    "TESTCOUNTSR": "有N點",
    "TESTCOUNTSV": "有N點",
    "WAFERWEIGHT": "Wafer 重量",
    "PRODUCTIONSEGMENTDATA": "生產區段資料",
    "CANNOT BE": "不能是",
    "INVENTORY TYPE": "庫房類別",
    "COMPANYNAME": "公司全名",
    "DATETIME": "日期時間",
    "NEED TO DO MACHINE CHECK": "需做機台點檢",
    "LOGTIMEINTERVAL": "歷程時間區間",
    "MERGECARRIER_COMP": "載具併批_元件",
    "8D CLOSE": "8D 矯正單結案作業",
    "CHECK OUT BATCH": "批次出站",
    "OPSHORTNAME": "作業站簡稱",
    "DTHOSTPARAMETER_TCPIP": "DT Host 參數",
    "DATATYPE": "資料類別",
    "DATAVIEW": "資料檢視",
    "DATADATE": "Data Date",
    "DATAFLAG": "資料Flag(外部傳入)",
    "DATALIST": "資料清單",
    "DATANAME": "資料名稱",
    "ACC_SYSFLOW": "配件管理",
    "HOLD DESCRIPTION": "異常說明",
    "SUGGDISPERFDESCRIPTION": "建議處置",
    "ERFINFORMATION": "異常單資訊",
    "CIRCLEMODEL": "循環模式",
    "ACCSCRAPREASONBASIS": "配件不良原因基本資料",
    "PLEASE SET UP PARAMETER NO P_LOTCREATE_MERGE_UFMAP TO N TO TURN ON MAPPING FUNCTIONS": "請將系統參數 P_LOTCREATE_MERGE_UFMAP(生產批開立自動疊圖)設定為N",
    "LOTEXECUTE": "生產報工",
    "EQP MTTR SUMMARY": "設備MTTR統計表",
    "INSPMACHINEPARAMETERTYPEDEF": "檢測儀器類別定義",
    "OSDETAILDEF": "外包單明細",
    "MATERIAL QUERY BY LOT": "生產批使用物料查詢",
    "BASEAREA": "基底區域",
    "MORE THAN ONE LOT IN THIS CARRIER": "載具內同時存在多批生產批",
    "BR_M_CO_GEN": "企業邏輯 - 工單生產登錄介面(Check Out)",
    "QCITEMTYPESHOW": "品管項目類別",
    "YEAR BASIS": "年度定義",
    "QCSPECBASISDEF": "品管項目規格定義",
    "GRRCOMPLETE": "已量測",
    "SERVICENAME": "服務名稱",
    "ACCTYPE": "配件類別",
    "INVSEMIINDETAILDATA": "半成品進料單明細資料",
    "TABLESOURCE": "Table Source",
    "ENTMODULE": "客戶資料",
    "PACKINGRULEVERSION": "包裝規則版本",
    "ABLETODO": "允許加工",
    "SHIFTGROUPNO": "班別組成編號",
    "TARTEND": "趨勢",
    "IMMEDIATEHOLDSET_BATCH": "批次立即異常設定",
    "TASKDES": "權責說明",
    "MSAMODULE": "量測系統管理",
    "PROCESSPROPERTY": "流程屬性",
    "QUEUE IS FULL": "資料已足夠",
    "DBSTARTTIME": "DB Start Time",
    "FUTUREWAITRELEASEDEF": "預先等待解除定義",
    "RETURNTOINVSTATE": "歸還 模製具狀態",
    "ON LINE DETAIL DATA": "線上明細資料",
    "DAILYINSP": "每日檢",
    "SHEETCOUNT": "總片數",
    "LOT QTY ADJUST": "生產批數量調整",
    "PROPERTYNO": "屬性編號",
    "PROPERTIES": "屬性",
    "SHOWINSPWEEK": "每週檢日期",
    "REPORTSCRIPTCONDITION": "描述語言及條件式定義",
    "LASTRUNTIME": "最近執行時間",
    "STARTOP OR ENDOP BRNO CAN NOT BE N/A": "開始或結束企業邏輯不可為 N/A",
    "TIMERANGE": "時段",
    "PRIVOPTION": "權限選項",
    "INVSEMIINVENTORYBASIS": "半成品庫主檔",
    "EAIREGISTERINFO": "EAI註冊資訊",
    "STDDEVVF1": "標準差電壓",
    "STDDEVVF3": "標準差正向電流",
    "STDDEVVZ1": "標準差電壓",
    "STDDEVIR1": "標準差逆向電流",
    "TAXCODE": "統一編號",
    "LOGINDATE": "登入日期",
    "LOGINAREA": "登入區域",
    "LOGINUSER": "登入使用者",
    "LOGINTYPE": "登入類型",
    "LOGINTIME": "登入時間",
    "ANSSETLIMIT": "Ans Set Limit",
    "ACCLIMATIONDATE": "回溫時間",
    "ORIGINAL QTY": "原始數量",
    "REPAIRSTATE": "維修  模製具狀態",
    "BR_L_CIOS_GEN": "企業邏輯 - 外包登入介面(Check In)",
    "EQPCONSUMEDATA": "設備耗品",
    "ERF BASIS": "異常單資料",
    "WIPOSCONFIRMBASIS": "外包確認主檔",
    "RELATIONSR": "關係",
    "RELATIONSV": "關係",
    "RELATIONVR": "關係",
    "MODULEPROCESS": "製程模組設定",
    "MATERIALTYPEQCITEMDEF": "物料類別品管項目定義",
    "WIP ERF QUERY": "異常單資料",
    "ERPT100SETTING": "找不到T100相關整合設定資訊, 請先至 系統管理->參數->ERP整合設定 中設定相關資料",
    "PACKINGLIST_GENERAL": "開立包裝清單",
    "BROKERBASISDEF": "報關行基本資料定義",
    "PLOT_INFO_GET": "生產批資訊取得",
    "REPAIRLEVEL": "維修等級",
    "FREQUENCY": "頻率",
    "RULE_ALERTISPC": "警告",
    "PM CALENDAR": "保養日曆設定",
    "TAKERNO": "取貨公司",
    "TAKEQTY": "Take Qty",
    "PLEASE USE THE TEMPORARY OUTSOURCING FUNCTION": "請使用臨時外包",
    "INALLTESTSV": "整組檢驗數據中",
    "OBJECTWIDTH": "Object Width",
    "SMD CONFIG": "廠區設定",
    "FRMATT_ONLINECONTROLMEASUREDATAFORTAPE": "計數線上資料收集",
    "TIMECYCLE": "管控週期",
    "FORMAT ERROR": "格式錯誤",
    "RAW_MATERIAL RETURN": "原物料-退料/退貨單",
    "REPAIRCYCLE": "壽命上限",
    "WIP ERF BASIS": "異常單",
    "ONLYALLOWORGBINSUB": "只允許針對原Bin扣量",
    "CANCLE CLOSE MO": "還原工單結案",
    "ALLPSOP": "區段所有作業站",
    "ALLPASS": "全部合格",
    "ADDDESCRIPTION": "新增說明",
    "SYSTEM_DEFINE": "系統",
    "TOTALCOST": "總異常成本D+E",
    "TOTALTIME": "總時間",
    "REPAIRBASIS": "維修項目基本資料",
    "TOTALPAGE": "總頁數",
    "USERGROUPSHOWDEF": "顯示群組使用者定義",
    "ACCESSORYSTATEMONITORBYEQPDEF": "配件狀態監控_設備定義",
    "BILLBOARD_OPSTATE_PRODUCTNO": "作業站現況看板_產品",
    "MOVEDOWN": "下移",
    "REFORZENTIMES": "回冰次數限制",
    "OBJECTCOLOR": "Object Color",
    "ITCONTAINER2": "",
    "OPERATORONLINEDEF": "使用者登入(上工)資訊定義",
    "RIGHTMOVE": ">",
    "INSTRUMENT CONFIG": "儀器設定",
    "ECNSTEP4DESCRIPTION": "選擇變更因子及因子值",
    "FOR EXAMPLE": "例如",
    "CWAFERSIZE": "晶圓尺寸",
    "DECIMALS": "小數位",
    "TAPELENGTH": "Tape長度",
    "EMS_EQP_CAPBASIS": "設備能力項目主檔",
    "LOTOPAREACHANGE": "生產批作業區變更",
    "OBJECTFILEFORM": "物件對應表",
    "COMPONENT PROPERTY": "元件屬性",
    "ISSUEJOBBASIS": "簽核工作",
    "ALERTCONDITIONSETTINGS": "警示條件設定",
    "COMPAREVALUE1": "Compare Value",
    "COMPAREVALUE2": "Compare Value",
    "ALERTNO": "警示編號",
    "ENGVERSION": "工程版本",
    "PMWOCREATE": "保養工單開立",
    "PLOT_CHECK_IN_PROCESS": "進站作業",
    "CAL TYPESHOW": "",
    "NODEDEF": "節點定義",
    "NODEGAP": "間距",
    "NODENO1": "節點編號",
    "NODENO3": "節點編號",
    "PRD PACKINGRULE MAP": "產品包裝規則對應設定",
    "VARFACTORSELECT": "選擇要因",
    "SOME DATA ARE NOT DELETE": "部份資料未刪除",
    "MAX_CARTONNOFN": "大箱n/n最大值",
    "NONE SELECTED A LOT TO DO LOT MERGING": "未選取任一筆生產批進行併批",
    "LASTVERSION": "更新版本",
    "PASSWORD INCLUDE LIMIT STRING": "密碼包含限制的字串",
    "ABNORMAL": "不良現象",
    "WIPTRACKING": "在製品追蹤",
    "MATERIAL IN LOG": "進料單記錄",
    "TEMPLATECOLOR": "樣板顏色",
    "BR_CL_MERGE_GEN": "併批處理_載具",
    "USER GROUP PRIVILEGE": "使用者群組權限",
    "MUST BE DATATIME": "需為時間型態",
    "PRS_SYSFLOW": "流程管理",
    "NOMATCH": "不符合",
    "ALREADY": "已經",
    "UNABLETODO": "不允許加工",
    "INSPMACHINETYPEDEF": "檢測機台類別定義",
    "RETRUN VALUE IS NOTHING": "該資料為空",
    "CARRIERTYPE": "載具類別資料",
    "SUMSCRAPQTY": "元件上損壞數加總",
    "ACCESSORYREPAIRDEF": "配件維修單開立定義",
    "CHAMBERMANAGE": "是否啟用子設備管理",
    "OPERATOR CLOCKOUT": "使用者登出作業(下工)",
    "EQPCYCLEBASISDEF": "圈別資料定義",
    "USERLEVELSHOW": "使用者等級",
    "NOT PASS": "報廢",
    "ERFBASISDEF": "異常單資料定義",
    "WORKTIMETEMPLATEDEFINE": "工作日曆樣板定義",
    "POSITIONSET": "工位設定",
    "OPENLIMITTIMEFLAG": "開封後有效時間管理",
    "FACTORONLINE": "線上管制要因",
    "NOTSHOW": "不顯示",
    "FUTURE WAIT SET": "預先等待設定",
    "SELECTEDEQUIPMENTS": "已選之設備",
    "NOTNULL": "不為空值",
    "SPC ERF QUERY": "SPC 異常單查詢",
    "CREATE LOT_BATCH WAFER": "",
    "ABNORMALBASISDEF": "不良現象主檔定義",
    "LICENSE EXPIRED": "系統授權已過期",
    "MOSTATESHOW": "工單狀態",
    "NOT SET": "未設定",
    "MOBASIS_PCB": "工單主檔_PCB",
    "OPNODEGROUPNO": "作業站節點群組編號",
    "USER LEVEL IS NOT ADMINISTRATOR OR GROUP LEADER": "CANNOT BE GROUP LEADER.",
    "LOTRANGEN": "連續M筆指定要因條件中",
    "BR LP CI GEN": "部份報工進站",
    "BR LP CI NET": "網狀製程報工進站",
    "RPT_ON_YIELDDEF": "產品良率查詢定義",
    "QCINSPECTIONDEF": "設備品檢管理設定",
    "ARCHDBDATASOURCE": "封存資料庫來源",
    "COMPONENTATTRIB": "元件特性",
    "CURRENT STATUS IS NOT RUNNING": "CANNOT EXECUTE PACKING",
    "SHOWCHARTBARVALUE": "顯示Bar數值",
    "BR LP CO GEN": "部份報工出站",
    "BR LP CO NET": "網狀製程報工出站",
    "ISSUE STATE": "簽核狀態查詢",
    "PRODUCT OUTPUT_MONTH": "產品入庫月報明細查詢",
    "LOTRECORD": "生產註記",
    "ISSUE QUERY": "簽核資料查詢",
    "IS GROUP LEADER,SO CANT CHANGE STATUS": "為群組領導人，不允許變更",
    "ECN BASIS": "工程變更",
    "FROMUNFROZEN": "未簽核",
    "RUNWIZARDAGAIN": "繼續執行工程變更精靈",
    "CLOSEOPTION": "關帳類型",
    "PRODUCTMOWITHDIFFERENTUNITNO": "產品與工單單位不一致",
    "HIDDEN COLUMN": "隱藏欄位",
    "SOPBASISDEF": "標準作業程序定義",
    "INVENTORYCLASS": "庫房分類",
    "DEDUCTIONQTY": "扣除數",
    "TOSCRAPQTY": "To Scrap Qty",
    "BILLBOARD_OPSTATEDEF": "作業站現況看板定義",
    "MO BASIS EPI": "工單開立_磊晶",
    "PROJECTMANAGER": "專案經理",
    "VARIANCEX": "x軸變異數",
    "VARIANCEY": "y軸變異數",
    "VARIABLES": "計量型",
    "INVENTORY_SEMI": "半成品庫帳務維護",
    "QCATTRULEDETAIL": "計數判別法則明細",
    "INSPECTIONMACHINEBASISDATA": "檢測機台資料",
    "EQPMAINTENANCEPLANADJUSTDEF": "保養計劃變更定義",
    "TRENDCHARTLABEL": "趨勢圖(標籤)",
    "NOT SELECT PROCESS": "沒有選擇流程",
    "INVENTORYBASIS": "庫房基本資料",
    "ISSUE GROUP": "簽核群組資料",
    "SEMIIN QTY": "半成品入庫數量",
    "MAXUSELIMIT": "最大壽命",
    "MO BASIS_PCB": "工單開立_PCB",
    "MO BASIS_LED": "工單開立_LED",
    "FIRSTCONFIRMDATE": "First Confirm Date",
    "RAW INVENTORY": "原物料倉庫房資料",
    "EMS CONTROL": "設備控管設定",
    "ECN SETUP": "產品未設定ECN資訊",
    "ONTIMEFINISHMORATE": "準時完工率",
    "BREAKDOWNSTARTTIME": "故障開始日期",
    "GRIDSIZEWIDTH": "格寬",
    "QC CATEGORY": "品管類別",
    "RETURNORGPROCESS": "回原流程",
    "LICENSELIMIT": "金鑰限制",
    "PLEASE CHECK ALL QC INSPECTION ITEMS HAS BEEN COMPLETED": "請確認設備品檢管理項目皆已完成",
    "EQUIPMENTTYPEISSUE": "設備類別簽核",
    "LOTRULENO": "計數判別法則",
    "PARAMETER": "參數",
    "USER CURRENT AGENT": "目前代理設定",
    "INVENTORY_WIPSCRAPTURNERP": "損壞轉至ERP",
    "HOLDITEMNAME": "異常原因名稱",
    "MONTHRPTCODE": "管制圖月報表編碼清單",
    "PUBLISH": "發行",
    "BYFACTOR": "依要因",
    "ATTACHED": "附件",
    "INVRAWWAFERBASIS": "基板物料",
    "DTHOSTBASISDEF": "DT Host 定義",
    "RESIDUALLIFE": "目前剩餘壽命",
    "EXCEPTIME": "除外時數",
    "EXCEPTION": "例外處理",
    "QCLISTNAME": "點檢表名稱",
    "QCLISTITEM": "點檢表項目",
    "PQCFORM_USELOTNOSAVELOG": "PQC檢驗單是否要以批號存入檢驗紀錄",
    "YOU MUST HAVE COMPONENT": "必須要有元件",
    "NONE DEFINE LINK OF START NODE": "找不到START Node的LINK",
    "LOT SPLIT_PCS": "分批處理_PCS",
    "LOT SPLIT_BIN": "分批處理_等級",
    "NOW LIFE": "目前壽命",
    "ACCESSORYMASKGROUPDEF": "光罩群組定義",
    "COMPUTERAREADEF": "過帳電腦之區域定義",
    "LOT OP CONT MATERIAL ADJUST": "生產批作業站用料記錄調整",
    "SOME COLUMNS ARE NOT MODIFIED": "部分欄位未變更",
    "EXCEL2003": "Excel 97-2003",
    "PLEASE SET DEFROSTMAXHOUR FIRST": "請先設定最大回溫時效",
    "GETSYSUNIT": "...",
    "AUTOCREATEWO": "開立保養工單",
    "INVRAWINVENTORY": "原物料倉庫房資料",
    "LOTSERIAL": "生產批序號",
    "PACKING_UNPACK": "包裝拆解",
    "NOT VALID ISSUE STATE TO DELETE": "沒有合理的狀態可以刪除",
    "EQPNOPRDACC": "設備未掛載指定的配件",
    "FEATURENONODENOTFOUNDORVALUEISEMPTY": "找不到特徵碼清單特徵碼編號節點或特微碼編號為空",
    "ERFDISPOSITION": "異常單處置",
    "PM PLAN CHANGE": "保養計劃變更",
    "INSPSTARTTIME": "檢測開始時間",
    "CURRENT OPNO": "目前所在作業站",
    "PRODUCT DATA IMPORT": "產品資料匯入",
    "UPLODPATH": "",
    "QCRESULT": "結果",
    "ACC MAINTENCE": "維修作業",
    "ATTRIBNO": "特性編號",
    "MATERIAL CONFIG": "物料設定",
    "RESOURCEQUERYDEF": "生產批資源檢視定義",
    "IS LESS THAN OR EQUAL TO": "小於等於",
    "MOSTATE6": "工單已在客託倉或退貨倉",
    "CALBYLOT": "依生產批",
    "PUTINTO": "投料至",
    "CONDITION1": "條件式",
    "CALLEDID": "識別碼",
    "CALLEDIP": "IP位置",
    "CONFIGSETTINGDEF": "Config 設定定義",
    "ACCESSORYVERSION": "配件版次",
    "DATAOFLOTSTATE": "生產批現況資料",
    "ORGTOTALQTY": "調整前總數",
    "SISTATUS": "SI Status",
    "CALENDAR": "日曆",
    "EQP STATE LOG": "設備歷程查詢",
    "LOTSTDQTY": "標準批量",
    "LOTSTATUS": "生產批狀態",
    "OPTYPEDEF": "作業站類別資料定義",
    "PACKING_MOLINE_LABELPRINT": "包裝標籤補列印",
    "DISPOSITIONOPTION": "處置選項",
    "DBPASSWORDENCODE": "編譯/解譯資料庫密碼",
    "SCR PRODUCT IN": "不良品入庫",
    "EXPIREDATE": "保存期限",
    "IF YOU SURE TO CHANGE LOT,CARRIER POSITION WILL RETURN TO PREVIOUS STATE": "若確定切換生產批，載具將恢復至選取前位置狀態",
    "JUMP PROCESS": "跳流程",
    "SERIALMAXADJUSTDEF": "序號調整定義",
    "INVENTORY_SCRAPTURNERP_T100": "",
    "SCRIPTISVALID": "有計算式",
    "BR_LC_SPLIT_GEN": "分批處理_元件",
    "LOTSTATEDEF": "生產批狀態查詢定義",
    "COMPUTERAREA": "過帳電腦之區域",
    "COMPUTERNAME": "電腦名稱",
    "INCOMINGQCFORMNO": "進料檢驗單編號",
    "CALRULE1": "只選 Sample Size >= 25 者",
    "CALRULE2": "全選",
    "UP LOW LIMITS_RGR": "上下限(紅綠紅)",
    "SEARCHDIRECTION": "搜尋方向",
    "SMALLLOCATOR": "小架位",
    "OPER EXCEPTION TIME": "使用者除外工時",
    "MERGE LOTNO": "併批生產批編號",
    "NODEOCAPDEF": "OCAP節點基本定義",
    "EQP CONSUME STATUS": "機台耗品現況",
    "IS NOT CORRECT": "不正確",
    "PRDDEFECTLOGDETAILDEF": "Product Defect Log Detail Def",
    "TESTQTY": "測試數量",
    "MOSOURCE": "工單來源",
    "EQPENGINEERGROUPBASISDEF": "設備工程群組資料",
    "MATERIALOUTBASIS": "領料單主檔",
    "PERFORMANCE-TIME": "績效-時間",
    "QAMEMBERNAME": "驗證人姓名",
    "TOINVENTORYNO": "目標庫房編號",
    "PROJECTMANAGERNAME": "專案經理姓名",
    "ORDERNO": "Order No",
    "ORDERBY": "排序",
    "CIEMPLOYEENAME": "員工姓名",
    "PMWOBASISDEF": "開立保養工單定義",
    "CUSTOMER CONTACTOR": "客戶連絡人資料",
    "SUBSTITUTIONVENDORDEF": "備品供應商基本資料定義",
    "VAR_ONLINECONTROLMEASUREDATA": "計量線上資料收集",
    "AREAINVENTORY": "區域庫房基本設定",
    "ORGROUP": "Or 群組",
    "SPLITSYSQTY": "子批系統批量",
    "RETURNUSERNO": "Return User No",
    "CALENDAR BASIS": "行事曆設定",
    "CASSETTESTATE": "Cassette 狀態",
    "SHOWAREACOLOR": "顯示區域顏色",
    "BR_LB_MERGE_FTDEF": "併批處理_等級定義",
    "SROLLCOUNT": "Sroll Count",
    "THE NUMBER OF SUBCONTRACTS IS SET TOO LITTLE TO CAUSE THE LOOP TO EXECUTE MORE THAN FIVE TIMES": "分包筆數設定過少導致迴圈執行超過五次",
    "FEATURENO": "特徵碼編號",
    "PACKACCESSORY": "包裝配件",
    "CURRENT STATE IS NOT ALLOW MERGE": "目前狀態不允許併批",
    "RANGECONNECT": "~",
    "TYPEVALUE": "標準值",
    "CHECK DATA SUCCESS": "資料檢核成功",
    "MATERIALVENDOR": "物料供應商基本資料",
    "CREATE LOT_BATCH REWORK": "",
    "EDITLANGUAGE": "編輯語言",
    "L3_SOPPATH": "第三層指導書路徑",
    "TYPERANGE": "範圍",
    "AREASHOWEMSDEF": "設備狀態監控_區域定義",
    "INITIALSTATE": "初始化狀態",
    "LABELDETAIL": "產品標籤明細",
    "CONFIRMPASSWORD": "密碼確認",
    "ANSLRRANDPPMCHART": "拒收率百萬不良數管制圖",
    "PRODUCTTECHSPECDETAIL": "Product Tech Spec Detail",
    "WP_8DPRECAUSIONDEF": "預防措施資料定義",
    "CHANGEPASSWORD": "密碼變更",
    "TOTALTIME_HR": "總時間 (小時)",
    "RETURNUNITNO": "Return Unit No",
    "OP SPECITEM": "OP Spec Item",
    "RPTCHARTMNTH": "管制圖月報表",
    "ENTOSITEMDEF": "外包項目設定定義",
    "D5 HAVE BEEN VERIFIED！": "已有D5驗證資料",
    "INVRAWINVENTORYLOC": "原物料倉儲位",
    "INVRAWINVENTORYDEF": "原物料倉基本資料定義",
    "DATAPROPERTY_M": "組合(Multi)",
    "DATAPROPERTY_U": "自訂",
    "DATAPROPERTY_S": "系統",
    "COMPONENTLIST": "元件清單",
    "COMPONENTDATA": "元件資料",
    "MUST BETWEEN": "必須介於",
    "MEASUREPRODUCT": "量測物編號",
    "ENGRECIPE": "工程參數",
    "PROPERTYVALUE": "屬性值",
    "SYSUNITNO": "系統單位編號",
    "REASONPRDSOPFILEIMPORT": "品質原因產品指導書匯入",
    "BYPIECE": "依個數",
    "IMPORTDATE": "匯入日期",
    "SIMULATE": "模擬",
    "LOTQTYALLOCATION": "撥轉作業",
    "UPPERLOWERCONTROL": "雙邊管制",
    "BYRANGE": "依範圍",
    "SPC OUT OF SPEC": "(SPEC)超出規格界線",
    "LOTBASISDEF_NET": "生產批主檔定義_網狀製程",
    "LOTBASISDEF_TAB": "生產批主檔定義_TAB",
    "ORGLOTTYPE": "Org Lot Type",
    "BYLOTNO": "依檢驗批",
    "PRODUCTRUNTIMESETUP": "ProductRunTimeSetup=產品標準作業時間設定",
    "EQP_MTTRSUMMARY_BYMONTH": "設備MTTR統計表_以月份匯總",
    "MESPRODUCTNAME": "產品名稱",
    "BREAKDOWNSTATENAME": "故障狀態說明",
    "UNEXECUTED": "未執行",
    "CAN NOT BE YES WHEN BIN VALUE IS GOOD": "GoodBin 不可設定OSBin為Yes",
    "IMPORT QC CHART DATA": "匯入管制圖內容",
    "HOLDDISPGROUPBASIS": "異常處理群組",
    "GET XLS FILE FAIL": "取得Excel檔案失敗",
    "IS NOT EQUAL CURQTY OF LOTNO": "不等於目前生產批數量",
    "QCITEMDEFINE": "品管項目定義",
    "SYSPARAMETER": "系統參數",
    "ACCESSORYSTATEMONITORBYEQP": "配件狀態監控_設備",
    "ARE YOU SURE TO CONTINUE": "確定要繼續",
    "PLEASE SELECT WHICH LOTS TO WAIT DISPOSITION": "請選擇進行等待處置的生產批",
    "PROGRAM BASIS": "測試程式",
    "CANNOTBE": "不可為",
    "ORGLOSSQTY": "原始遺失數",
    "CURRENTFLAG": "目前裝箱說明書",
    "PLEASE LET THE COUNT OF SELECTED DATA TO BE LESS THAN 255": "所選擇資料數量請小於255",
    "QCTASKNO": "檢驗任務編號",
    "OP GROUP BASIS": "作業站群組資料",
    "CURRENTTIME": "目前時間",
    "REASONBASISDEF_8D": "8D 原因基本資料定義",
    "YOU CANNOT ADD DATA": "無法新增資料",
    "COMPONENT PROPERTY DEFINE": "元件屬性定義",
    "INVSEMIOUTBASISDEF": "半成品出庫單主檔定義",
    "LOTBASISDEF_CE": "生產批主檔定義_網狀製程",
    "NOT ALLOW TO PACKING": "不允許包裝",
    "CONNECT_LIGHTION": "全測機",
    "EQUIPMENT CHECK OUT": "設備check Out",
    "CANCELED": "取消執行",
    "SN_P_SERIALLENGTH": "棧板編碼序號長度",
    "AUTOCHKHOST": "自動檢查主Host是否離線",
    "FORMATSTRING": "格式字串",
    "LED WAFER LIFE": "Wafer Life檢測資料值登錄",
    "MULTISOURCE": "Multi Source",
    "DELATTACHFILE": "刪除附件",
    "POSITION": "位置",
    "LOTPROPERTYBASISDEF": "生產批屬性設定定義",
    "SPC DATA COLLECT": "資料收集",
    "INTEGERDIGIT": "整數位數",
    "SYSTEMTABLEMAP": "系統資料表對應明細",
    "SYSTEMTABLEDEF": "系統資料表定義",
    "EQPMTTRSUMMARY": "設備MTTR統計表",
    "FROM HOSTNO": "From Host No",
    "QCCATEGORY": "品管類別",
    "EXITGROUP": "離開群組",
    "MONONOTAPPROVED": "工單未核准",
    "IFPRDPRODUCTPARAMETERSYNCISCHECKED": "有選取生產參數同步時",
    "KMI_LOTINFO_COMPLETE": "行動報工首頁顯示已完工生產批",
    "MULTISELECT": "選取反白",
    "LED_WAFERMAP": "全點分佈表",
    "QRSCLASS": "8D單分類",
    "EQPSTDOUTPUT": "標準產出數(hour)",
    "ATT REPORT": "計數型報表",
    "RERUN_SEMI": "重新上線",
    "PACK_CARTONQTY": "已包裝大箱數",
    "SPECCATEGORYNO": "SPEC Category No",
    "AUTORUN": "自動執行",
    "AUTORCV": "自動接收",
    "CHANGEPRODUCT": "變更產品",
    "ELEMENTVALUE": "元素值",
    "APPLY EQP ACCESSORY": "配件上機",
    "VIOLATESTATECHANGESETDRAW": "設備狀態互斥設定",
    "CLOCKOUT": "下工",
    "CLOCKALL": "ALL",
    "REPORTMAPDEF": "報表索引定義",
    "CANT USE": "不能使用",
    "PROGRAMBASISDEF": "測試程式定義",
    "MOUNITNO": "工單單位",
    "PRODUCTPROCESS": "產品流程",
    "PRODUCTPROGRAM": "測試程式",
    "DISPOSITIONRESULT": "處置結果",
    "WP_8DCREATEMEMBERDEF": "團隊建立資料定義",
    "IMMEDIATEHOLDSET": "立即指定異常",
    "IS SPECIFIED MATERIAL": "為指定用料",
    "OVERLOCATORLIMIT": "超過儲位數量限制",
    "OPPARAMETER": "作業站參數",
    "ELEMENTBASIS": "特性設定",
    "PRODUCTPACKINGRULEBASISDEF": "包裝規則設定定義",
    "UTILIZATIONRATE": "機台可動率",
    "UTILIZATIONTYPE": "稼動類型",
    "SEMI IN LOG": "半成品進料單記錄",
    "GET LANGUAGE": "擷取語言",
    "CANCELINV": "取消入庫",
    "STATUSSHOW": "狀態",
    "STATUSNAME": "狀態",
    "CREATE LOT CE": "生產批開立_網狀製程",
    "CREATE LOTASS": "生產批下線",
    "THE CURRENT SYSTEM DOES NOT ALLOW PRODUCTION BATCH PRODUCT CHANGES!": "目前系統設定不允許生產批產品變更！",
    "CLOSEWIP": "在製品",
    "CLOSERAW": "原物料",
    "CLOSEFGD": "成品庫",
    "CLOSELOT": "結批",
    "QC_FORM_CREATE_PROCESS": "檢驗單開立作業",
    "MOSTATENOTEXIST": "工單狀態不存在",
    "MOSTATENOTCLOSE": "工單狀態非已結案",
    "SAMPLEBINNO": "抽樣Bin",
    "QUESTIONDESCRIPTION": "問題描述",
    "MOTYPENO": "工單類別編號",
    "ERPFLAG MUST BE 1": "ERP拋轉狀態必須為是",
    "UNCODEOUTQTY": "UnCode Out Qty",
    "INCLUDEMOTHERLOTNO": "包含母批批號",
    "PRODUCT PARAMETER": "產品參數",
    "PMCALENDAR": "保養日曆",
    "CONT_COMPMATERIAL_BYCOMP": "元件使用物料查詢",
    "INSPDRIVERDATA": "連線程式資料",
    "COPYFROMOTHERMODULE": "複製自其它模組",
    "PMRELEASESTATE": "保養工單下線狀態",
    "RATABPAGECONTROL5": "無效等級",
    "RATABPAGECONTROL4": "Scrap Component",
    "RATABPAGECONTROL7": "Entrust",
    "RATABPAGECONTROL6": "Return",
    "RATABPAGECONTROL1": "RAW",
    "RATABPAGECONTROL3": "Scrap",
    "RATABPAGECONTROL9": "SEMI_Lot",
    "RATABPAGECONTROL8": "Wait Incoming",
    "NETFLOWMESSAGE1": "此作業站區段屬於網狀製程，不允許調整企業邏輯。",
    "ONLINE OP LOTQTY": "作業站生產現況查詢",
    "OP TYPE": "作業站類別資料",
    "OP NODE": "作業站",
    "OP AREA": "作業區域",
    "FIXEDTIMESSETUPDEF": "設備定次定時保養設定定義",
    "OQCOPNO": "sQMS OQC檢驗單開立_作業站設定",
    "ORGCARRIERNO": "原載具編號",
    "OQCFORM": "出貨檢驗單",
    "FROMINPUTDATE": "從庫房入庫日期",
    "UPDATE_TIME": "Update Time",
    "INVMATERIALRETURN": "開立退料單",
    "OPERATORLOGIN_LOT": "多人加工登錄",
    "MATERIALDATAIMPORT": "物料資料匯入",
    "EQUIPMENTCONTROL": "設備控管設定",
    "GENWAFERNO": "產生廠內晶片編號",
    "ATTFACTORSELECT": "選擇要因",
    "MSADETAIL": "量測系統分析明細",
    "GETSAMPLEQTY": "Get Sample Qty",
    "MIL-STD-1916": "MIL-STD-1916",
    "MIL-STD-105E": "MIL-STD-105E",
    "AGENTCREATEDATE": "代理人建立日",
    "BR_LB_CI_GEN": "企業邏輯 - 測試登入介面(Check In)",
    "DISPOSITIONSELECT": "選擇處置",
    "BELONGTOTYPESHOW": "所屬類別",
    "SUMMARYDATA ALEARY EXISTS": "總結資料已存在，請至結案作業中結案",
    "BR_LB_CO_GEN": "企業邏輯 - 測試生產登錄介面(Check Out)",
    "TESTDATA COMMUNICATION FAIL": "測試資料傳輸失敗",
    "NEXTDISPDEPT": "選擇下一處理部門",
    "PRDOPCAPITEM": "產品-設備能力項目",
    "NEXTDISPTYPE": "下一個處置類型",
    "SYS MODULE": "系統模組",
    "CANCELWORKRPT": "取消報工單",
    "AVGWLD1": "平均波長",
    "SAMPLEPOINT": "抽樣點數",
    "INVMATERIALRETURNCONFIRM": "退料單確認",
    "AVGLOP1": "平均亮度",
    "OFFLINE QC": "Offline QC",
    "TRACEDESCRIPTION": "追蹤說明",
    "ASSEMBLY": "零件",
    "PROCESSTYPEDATA": "流程類別資料",
    "8DNO": "8D單編號",
    "REWORK_QTY": "重工數量",
    "TO RULENO": "To Rule No",
    "INLOCATORNO": "In Locator No",
    "EACH": "每",
    "EDIT": "修改(&E)",
    "EMNO": "EM No",
    "ELSE": "Else",
    "ERP1": "ERP1",
    "ESOP": "eSOP設定",
    "EXIT": "離開",
    "FAIL": "失敗",
    "FANO": "FA No",
    "FILE": "檔案",
    "FIND": "尋找",
    "FLOW": "製程",
    "FLAG": "旗標",
    "FORM": "表單",
    "FROM": "從",
    "ADD4": "新增(&A)",
    "ADD5": "新增",
    "ADD6": "新增",
    "ADD7": "新增",
    "ADD1": "新增(&A)",
    "ADD2": "新增(&A)",
    "ADD3": "新增(&A)",
    "AND2": "與",
    "AND1": "And",
    "ACNO": "銀行帳號",
    "ALL1": "不區分",
    "AREA": "區域",
    "DADD": "新增(&A)",
    "DATE": "日期",
    "DATA": "資料",
    "DAY1": "天",
    "DAYS": "天",
    "DEL1": "刪除(&D)",
    "DEL2": "刪除(&D)",
    "DEL3": "刪除(&D)",
    "DEL4": "刪除(&D)",
    "DEL5": "刪除",
    "DEL6": "刪除",
    "DEL7": "刪除",
    "DDEL": "刪除(&D)",
    "DONE": "完成",
    "DOWN": "下",
    "DUTY": "關稅",
    "DTNO": "DT 編號",
    "DRAW": "繪圖",
    "D_36": "36進位",
    "D_16": "16進位",
    "D_10": "10進位",
    "GET3": "...",
    "GET2": "...",
    "GET1": "...",
    "GET7": "...",
    "GET6": "...",
    "GET5": "...",
    "GET4": "...",
    "GET9": "...",
    "GET8": "...",
    "GRID": "格線",
    "GWNO": "GW 編號",
    "BACK": "上一步",
    "BCIP": "使用者編號",
    "BLUE": "藍",
    "BIN1": "Bin 1",
    "BIN2": "Bin 2",
    "BIN3": "Bin 3",
    "BIN4": "Bin 4",
    "BIN5": "Bin 5",
    "BIN6": "Bin 6",
    "BIN7": "Bin 7",
    "BIN8": "Bin 8",
    "BRNO": "企業邏輯編號",
    "MIN4": "分鐘",
    "MIN3": "分鐘",
    "MIN2": "分鐘",
    "MIN1": "分鐘",
    "MLOT": "母批",
    "MAIN": "主品管項目",
    "MONO": "工單編號",
    "MEMO": "備註",
    "MEAN": "平均值",
    "MUST": "必須",
    "MTTR": "平均修復時間",
    "MTBF": "平均故障間隔",
    "CODE": "代碼",
    "COPY": "複製(&C)",
    "COST": "成本",
    "CHNO": "Ch No",
    "CHAR": "碼",
    "CUT3": "剪下",
    "CUT2": "剪下",
    "CUT1": "剪下",
    "NODE": "節點",
    "NOFN": "n/n",
    "NONE": "無",
    "NAME": "名稱",
    "NEXT": "下一步",
    "NULL": "空值",
    "IMP1": "拉力機",
    "IMP3": "偏流測試",
    "IMP2": "電性測試",
    "INFO": "資訊",
    "IDLE": "閒置",
    "ICON": "圖示",
    "ITEM": "項次",
    "IPQC": "計數不良原因收集",
    "LINK": "連結",
    "LINE": "管制線",
    "LONG": "長",
    "LOAD": "讀取",
    "LOTS": "生產批",
    "LOP6": "<>",
    "LOP4": "<",
    "LOP5": "<",
    "LOP2": ">",
    "LOP1": ">",
    "LEFT": "左",
    "ONLY": "只有",
    "OQTY": "庫存量",
    "OSNO": "外包單編號",
    "OPNO": "作業站編號",
    "OSOPTION": "生產性質",
    "USED": "總使用次數",
    "USER": "使用者",
    "UNIT": "單位",
    "HOLD": "異常",
    "HOME": "首頁",
    "HOUR": "小時",
    "HAVE": "有",
    "VIEW": "檢視",
    "VIET": "越南文",
    "VOID": "作廢",
    "T100": "T100",
    "TURN": "轉庫",
    "TYPE": "類別",
    "TART": "開始",
    "TEST": "測試",
    "TEXT": "文字",
    "TIME": "時間",
    "THAI": "泰文",
    "THEN": "Then",
    "TLOT": "T Lot",
    "TOOL": "工具",
    "TON1": "Ton1",
    "TON2": "Ton2",
    "WAIT": "等待",
    "WEEK": "週",
    "WIP1": "生產線",
    "WHEN": "當",
    "WONO": "工單號碼",
    "WLD1": "波長",
    "RULE": "法則",
    "RQTY": "R Qty",
    "S006": "S006",
    "S007": "S007",
    "S004": "S004",
    "S005": "S005",
    "S002": "S002",
    "S003": "S003",
    "S001": "S001",
    "S008": "S008",
    "S009": "S009",
    "S010": "S010",
    "REQC": "補點檢",
    "RATE": "比率",
    "RANK": "等級",
    "RONO": "訂單編號",
    "PULL": "提取",
    "PUSH": "發送",
    "PSNO": "區段編號",
    "PROD": "產品",
    "PASS": "合格",
    "PAGE": "頁",
    "PMWO": "保養工單",
    "PLAN": "計劃",
    "PCNO": "電腦名稱",
    "PIID": "PI ID",
    "STOP": "停止",
    "SSEL": ">",
    "SPEC": "SPEC",
    "SET1": "設定",
    "SEC1": "(秒)",
    "SEMI": "半成品",
    "SEND": "發送",
    "SAVE": "儲存",
    "SAME": "相同的",
    "SNNO": "批號",
    "SOME": "部份",
    "SITE": "廠區",
    "SHOW": "顯示",
    "YES2": "是",
    "YES1": "是",
    "YEAR": "年",
    "ZOOM": "縮放",
    "XLS SOURCE FILE CONTROL": "Excel匯出樣板",
    "MOBILELOGIN": "行動裝置",
    "IF YOU CHANGED SMS CONFIG BEFORE TEST": "YOU MUST CONFIRM OR APPLY FIRST",
    "EQPTOTALOUTPUT": "總產出數",
    "ERFLOTSPLIT_COMPONENT": "異常單分批_元件",
    "ACCPROPERTYDEF": "配件屬性定義",
    "TO-FLOWNO": "新程序編號",
    "CONFIRMEDIT": "修改確認",
    "RPTMODULE": "報表管理",
    "CONFIRMDATE": "確認日期",
    "SPECIALFORMNAME": "特殊收集視窗",
    "EQPSTATELOG_GANTTCHART": "設備狀態紀錄甘特圖",
    "CONFIRM LOT": "生產批狀態查詢",
    "FACTORANALYSIS": "要因分析",
    "SEMIFGDBASIS": "入庫單記錄主檔",
    "SPC ONLIE CONTROL": "SPC 量測數據收集",
    "ADD OR EDIT": "新增或修改",
    "RETURNREASON": "退貨理由",
    "SAMPLE SIZE": "樣本數",
    "EAPMETHODBASIS": "EAP 接口資訊",
    "LED_WAFERMAPQUERY": "全點分佈表查詢",
    "BONDEDFLAG": "是否保稅",
    "UNVALIDACTION": "不合理值反應",
    "RAWDATALOG": "修改紀錄",
    "OVERLAP": "重疊",
    "INVCOUNTSTATEADJUST": "盤點調帳",
    "ALLOWBETWENOPHOLD": "允許中間站點觸發異常",
    "TEMPLATEUPD": "上傳樣版",
    "GET ATTACH FILE FAIL": "取得附件失敗",
    "PDLINETYPE": "生產線類型",
    "LED PARAMETER BASIS": "LED 參數資料設定",
    "PDLINENAME": "生產線別名稱",
    "PDLINEDATA": "生產線明細",
    "PDLINEAREA": "生產線資源",
    "NEXT BR": "下一個企業邏輯",
    "INSP. QTY": "Insp. Qty",
    "PMWOFINISH": "保養工單完成與回報",
    "INVSCRBASIS": "報廢倉主檔",
    "KERNELMODULE": "核心模組",
    "CONNECTIONMONITOR": "連線狀況",
    "CONTACTOR DEFINE": "聯絡人定義",
    "LOTRELEASE": "異常解除",
    "EAI_TYPE": "整合類型",
    "COMMITSTATESHOW": "鎖定還原狀態",
    "IMMEDIATE WAIT SET": "立即等待設定",
    "NETFLOW": "網狀製程",
    "CLOSEMTLWIP": "物料線邊倉",
    "ORGMATERIALQTY": "原始發料數",
    "IS NOT BELONG": "不屬於",
    "8DMEMBERDATA": "團隊建立資料",
    "LOTOPERATORCLOCKOUTDEF": "使用者批次下工作業定義",
    "FORMUNKNOWN": "(未知)",
    "ININVNUM INVALID": "入庫量需大於0且不得大於可入庫量",
    "WIPCLOSELOT": "零批量生產批結批",
    "ACTIONSHOW": "執行",
    "ERFPROCESSDRAW": "異常單流程變更",
    "ASSYFLAG": "Assy Flag",
    "NEWMONO": "新工單編號",
    "CHECKLOTNOSHOW": "是否檢查批號",
    "NEWCOMP": "",
    "NEWFORM": "新單開立",
    "ACTIONFROM": "執行來源",
    "SEMI_COMP": "在製品_元件",
    "EQUIPMENTACCSTATELOG": "設備配件歷史資料查詢",
    "EQUIPMENTACCSTATEDEF": "設備配件現況查詢定義",
    "GETFROMINVSTATE": "領用 模製具狀態",
    "PIADBASIS": "PIAD Basis",
    "MATERIALRETURN": "退料",
    "LOTATTRIBUTE": "生產批特性",
    "HOLD / WAIT": "異常 && 等待",
    "EQPTYPECONSUMEBASISDEF": "設備耗品主檔定義",
    "FUTUREHOLD": "預先異常",
    "MATERIALINBASISDATA": "進料單主檔資料",
    "FUTUREWAIT": "預先等待",
    "MOLINEPACKCONFIG": "包裝前作業",
    "ADJUSTSTATE": "調帳狀態",
    "INVSCRINDEF": "不良品入庫定義",
    "WIP_WIP MATERIAL RETURN": "在製品-退料單",
    "ADDOPRECIPE": "新增作業站參數",
    "SMDPDLINEPOSITIONBASIS": "工位基本資料",
    "MINVALUE": "最小值",
    "VIOLATIVE STATE SETTING": "設備狀態互斥設定",
    "BR_M_COREPAIR_GEN": "企業邏輯 - 工單維修登錄介面(Check Out)",
    "TIMESOF": "之倍數",
    "EXCLUDED": "排除",
    "RPTLOTLOG": "Log歷史資料查詢",
    "DELAYMORATE": "延遲開工率",
    "COPYOPTION": "複製選項",
    "COPYOPDATA": "複製作業站資料",
    "SELECTGROUPNOASNODE": "選擇群組資料",
    "ACTUALTIME": "實際時間",
    "MINTIME1": "最少時間",
    "THIS WEEK": "本週",
    "ONLY CAN CHOICE ONE": "只能選取一個",
    "PRIVORDER": "權限次序",
    "SHIFT BASIS": "班別基本資料",
    "SEMIOUTNO": "半成品出庫單編號",
    "BINASSIGN": "指定Bin",
    "CURRQCITEM": "計數群組",
    "SEMIIN NO": "半成品入庫單編號",
    "ATTDATA": "計數型資料",
    "MUST BE PERCENT VALUE": "需為百分比型態",
    "REASON BASIS": "品質原因基本資料",
    "EQPMOUNTMATERIALDEF": "機台上料定義",
    "CARRIERMANAGEMENT": "載具管理_元件",
    "PLANQCTIME": "預計執行時間",
    "EXPORTWAITMSG": "執行匯出時間較久，請耐心等候。",
    "ACC CATEGORY": "配件分類資料",
    "DATA HISTORY": "Data History",
    "RETURNEQPACCESSORY": "配件歸還",
    "COMPONENT PROPERTY BASIS": "元件屬性設定",
    "MINIMUM": "最小值",
    "REPAIRITEMNAME": "維修項目名稱",
    "MINLOP1": "最小亮度",
    "MSAQUERYGRRDATA": "MSA資料查詢",
    "MINUTE2": "分",
    "MINUTE1": "分",
    "MINWLD1": "最小波長",
    "MINTIME": "Min Time",
    "ALREADY RETURN": "已回",
    "APSINTEGRATIONBT": "APS整合"
  },
  "imes_action": {
    "8P02-200001": "請增加查詢條件後再重新查詢!",
    "ORA-00001": "請檢查資料有效性，並重新輸入。",
    "CP04-200001": "請檢查是否選對批號過帳",
    "9P10-200002": "N/A",
    "9P10-200003": "N/A",
    "9P10-200001": "請發料至工單",
    "DP07-100001": "請選擇是或否。",
    "CS25-100001": "請選擇是(換工單包裝)或否(繼續包裝此工單)。",
    "DP06-000029": "工單須執行校機",
    "DP06-000041": "請檢查設備及治具屬性是否正確",
    "AP16-200004": "請檢查產品作業站法則設定",
    "AP16-200005": "N/A",
    "AP16-200001": "請檢查產品作業站設定",
    "AP16-200002": "請檢查產品作業站參數設定",
    "CP06-100001": "請選擇是或否。",
    "DP06-400057": "該大箱編號OQC狀態為\"已撿料\"",
    "DP06-400056": "檢查該大箱是否已完箱",
    "DP06-400055": "請檢查該大箱編號目前OQC狀態",
    "9P06-200001": "請上傳測試資料。",
    "9P06-200003": "N/A",
    "9P06-200002": "N/A",
    "0000-000001": "N/A",
    "0000-000703": "N/A",
    "0000-000702": "N/A",
    "0000-000701": "N/A",
    "0000-002102": "資料入報廢倉",
    "0000-002101": "請選擇倉庫",
    "0000-002100": "請輸入所需資訊",
    "0000-002000": "N/A",
    "0000-001900": "檢查節點的有效性",
    "0000-001901": "選取『Start』節點",
    "0000-001907": "應先選取節點",
    "0000-001908": "選取『Start』 與『End』之外的節點",
    "0000-001909": "選取作業站節點",
    "0000-001001": "N/A",
    "0000-003002": "請您在下載完成後,安裝新版本並重新執行",
    "0000-003001": "N/A",
    "0000-003000": "N/A",
    "0000-230001": "請以人工手動方式輸入檢測值，或設定品管項目檢測儀器對應資料。",
    "0000-230003": "請選擇參數來源",
    "0000-230002": "品管項目必須定義判別法則!!",
    "0000-230005": "請至產品設定_封測功能，設定ECN資訊",
    "0000-230004": "請確認產品作業站資源是否設定",
    "0000-220008": "請檢查資料",
    "0000-220009": "請選擇一個關帳類型。",
    "0000-220001": "請重新選取",
    "0000-220002": "請重新設定物料或投料點",
    "0000-220003": "請重新選擇客戶批號!!",
    "0000-220004": "沒有盤點資料需要調整確認，可以直接盤點開帳",
    "0000-220005": "請檢查資料",
    "0000-220006": "請檢查資料",
    "0000-220007": "請檢查資料",
    "0000-220028": "請聯絡ERP人員!",
    "0000-220029": "N/A",
    "0000-220022": "請重新取出資料!",
    "0000-220023": "請先將其他已選的取消!",
    "0000-220020": "請先定義必要資料",
    "0000-220021": "請檢查相關設定資料!",
    "0000-220026": "請選擇是或否。",
    "0000-220027": "請檢查連線字串是否正確、確認VPN是否開啟或連絡ERP管理員。",
    "0000-220024": "N/A",
    "0000-220025": "請檢查屬性設定!",
    "0000-220019": "請重新輸入",
    "0000-220018": "請檢查過帳電腦之區域設定",
    "0000-220011": "請檢查資料",
    "0000-220010": "請檢查資料",
    "0000-220013": "請更新密碼",
    "0000-220012": "請先關閉執行模組",
    "0000-220015": "N/A",
    "0000-220014": "N/A",
    "0000-220017": "請稍後再執行",
    "0000-220016": "N/A",
    "0000-220033": "N/A",
    "0000-220032": "請發料至工單.",
    "0000-220031": "N/A",
    "0000-220030": "N/A",
    "0000-220036": "請檢查連線字串是否正確、確認VPN是否開啟或連絡WebIso管理員",
    "0000-220035": "請重新選取",
    "0000-220034": "請重新選取",
    "0000-216009": "N/A",
    "0000-216008": "請指定機台轉換狀態!",
    "0000-216005": "N/A",
    "0000-216004": "N/A",
    "0000-216007": "N/A",
    "0000-216006": "N/A",
    "0000-216001": "N/A",
    "0000-216003": "N/A",
    "0000-216002": "N/A",
    "0000-216010": "請先執行異常開單,解Hold後,方可Wait !",
    "0000-217005": "N/A",
    "0000-217001": "N/A",
    "0000-217002": "N/A",
    "0000-217003": "N/A",
    "0000-214009": "請指定元件給子批批號, 或是刪除該子批批號",
    "0000-214008": "請指定元件給子批批號",
    "0000-214007": "請先處置異常單",
    "0000-214006": "N/A",
    "0000-214005": "請檢查 DB 分批設定",
    "0000-214004": "重選回原流程型態",
    "0000-214003": "N/A",
    "0000-214002": "N/A",
    "0000-214001": "N/A",
    "0000-214012": "N/A",
    "0000-214013": "請檢查Table中Bin值是否仍有資料",
    "0000-214010": "請重選指定動作",
    "0000-214011": "請指定Bin給子批批號",
    "0000-215006": "N/A",
    "0000-215007": "請先處置異常單",
    "0000-215004": "N/A",
    "0000-215005": "N/A",
    "0000-215002": "N/A",
    "0000-215003": "N/A",
    "0000-215001": "請選擇其他批號",
    "0000-202109": "檢查批號與成品倉資料",
    "0000-202108": "請檢查資料",
    "0000-202101": "選擇適當之作業站、企業邏輯或通知IT處理",
    "0000-202100": "請選擇有效之抽樣計畫",
    "0000-202103": "請自倉庫領用足夠之原物料",
    "0000-202102": "請自倉庫領用足夠之半成品",
    "0000-202105": "無法進行此操作",
    "0000-202104": "請檢查物料批號的有效性",
    "0000-202107": "請檢查庫存量",
    "0000-202106": "檢查檔案名稱的格式",
    "0000-202110": "補足庫存",
    "0000-202111": "繪製正確的區域配置，設定線邊倉並核准區域",
    "0000-202112": "檢查資料",
    "0000-202113": "檢查時間區間",
    "0000-202114": "檢查外包資訊與生產批現況",
    "0000-202115": "請檢查目錄內是否有此檔案.",
    "0000-202008": "請檢查 DT 生產劇本",
    "0000-202009": "請檢查生產批現況",
    "0000-202001": "請檢查此批號之有效性",
    "0000-202002": "請檢查此批號之有效性",
    "0000-202003": "請檢查此批號之有效性或此生產批是否為 Running 的狀態",
    "0000-202004": "請檢查此批號狀態是否為 Running",
    "0000-202005": "請檢查此批號之有效性",
    "0000-202006": "請檢查此批號之有效性",
    "0000-202007": "請檢查生產批狀態",
    "0000-202018": "請改用功能模組之生產批執行功能(WP107)。",
    "0000-202011": "請檢查生產批狀態或變更批號",
    "0000-202010": "請選擇其他選項",
    "0000-202013": "請退出此功能並重新執行",
    "0000-202012": "請檢查生產批狀態",
    "0000-202015": "通知IT設定適當之權限",
    "0000-202014": "請檢查生產批狀態",
    "0000-202017": "請改用功能模組之生產批執行功能(WP107)。",
    "0000-202016": "請檢查生產批狀態",
    "0000-202308": "請一步步執行還原!",
    "0000-202303": "N/A",
    "0000-202302": "請重新開啟表單並重新取得生產批歷史紀錄!",
    "0000-202301": "請重新載入生產批的還原歷史紀錄。",
    "0000-202307": "請還原至TriggerOP的動作。",
    "0000-202306": "請先將所有分批子批還原至分批的下一動作後,再試一次。",
    "0000-202305": "請先還原至併批的下一動作後,再試一次。",
    "0000-202304": "請先還原所有的批次生產批至目前的動作後,再試一次。",
    "0000-202202": "變更簽核狀態",
    "0000-202203": "變更簽核狀態至初始化",
    "0000-202200": "核准簽核狀態",
    "0000-202201": "變更簽核狀態",
    "0000-202408": "請在密碼中輸入更多的數字字元!",
    "0000-202409": "請重新輸入密碼!",
    "0000-202404": "請連絡系統維護人員!",
    "0000-202405": "請連絡系統維護人員!",
    "0000-202406": "請重新輸入確認密碼!",
    "0000-202407": "請在密碼中輸入更多的英文字元!",
    "0000-202401": "請重新輸入密碼!",
    "0000-202402": "請重新輸入另一組密碼!",
    "0000-202403": "請重新輸入另一組密碼,長度不可大於25!",
    "0000-202414": "請連絡系統維護人員。",
    "0000-202411": "請重新輸入密碼!",
    "0000-202410": "請重新輸入密碼!",
    "0000-202413": "請重新輸入密碼!",
    "0000-202412": "請重新輸入密碼!",
    "0000-200121": "請檢查產品模組",
    "0000-200120": "請檢查區域模組設定",
    "0000-200122": "請檢視使用者權限設定",
    "0000-200109": "請檢查重新上線重新上線損壞數是否為數值型態。",
    "0000-200108": "請檢查重新上線損壞數數量。",
    "0000-200103": "請挑選生產批。",
    "0000-200102": "請輸入併批之批號。",
    "0000-200101": "請輸入批號",
    "0000-200107": "請確認流程編號是否選取『Start』節點",
    "0000-200106": "請挑選流程。",
    "0000-200105": "請確認重新上線良品數數量。",
    "0000-200104": "請檢查參考批狀態或是挑選參考批。",
    "0000-200118": "請輸入機種編號。",
    "0000-200119": "請重新輸入機種編號。",
    "0000-200112": "請檢查重新上線良品數數量。",
    "0000-200113": "請檢查重新上線良品數數量。",
    "0000-200110": "請確認重新上線數。",
    "0000-200116": "請檢查庫房編號及生產批序號。",
    "0000-200117": "請確認並批總批量。",
    "0000-200114": "請確認流程區段次序是否正確。",
    "0000-200115": "請檢查並挑選一個區段次序。",
    "0000-200093": "請檢查資料正確性（通常發生於兩個資料不得相同）",
    "0000-200092": "檢查指示中的訊息",
    "0000-200091": "N/A",
    "0000-200095": "請檢查資料!",
    "0000-200094": "檢查指示中的訊息",
    "0000-200021": "請檢查簽核狀態。",
    "0000-200022": "依據指示完成資料的完整性，再做簽核",
    "0000-200002": "請檢查傳入值。",
    "0000-200003": "N/A",
    "0000-200001": "請選擇或輸入資料",
    "0000-200004": "請檢查資料有效性，並重新輸入",
    "0000-200005": "請輸入資料。",
    "0000-200031": "請檢查關連性資料的有效性",
    "0000-200033": "請檢查資料的合理性",
    "0000-200032": "請先關閉表單再重新使用!",
    "0000-200060": "請檢查數量的正確性。",
    "0000-200061": "請檢查訊息的有效性",
    "0000-200062": "請檢查權限。",
    "0000-200018": "請檢查資料型態。",
    "0000-200013": "請檢查資料型態。",
    "0000-200012": "請檢查資料型態。",
    "0000-200011": "請檢查資料型態。",
    "0000-200017": "請輸入大於0的數值。",
    "0000-200016": "請輸入大於或等於0的數值。",
    "0000-200015": "請檢查資料合理性。",
    "0000-200014": "請檢查資料型態。",
    "0000-200041": "N/A",
    "0000-200709": "請選擇一個品管項目。",
    "0000-200708": "請設定品管項目原因對應資料。",
    "0000-200705": "請重新定義編號。",
    "0000-200704": "請重新定義編號。",
    "0000-200707": "請重新選擇品管項目。",
    "0000-200706": "請重新定義編號。",
    "0000-200701": "檢查規格與管制圖的設定",
    "0000-200703": "請選擇其他品管項目。",
    "0000-200702": "請檢查數據。",
    "0000-200719": "請選擇特殊收集介面。",
    "0000-200714": "請設定抽樣計畫或品管項目的模擬參數。",
    "0000-200715": "請設定品管群組之品管項目資料。",
    "0000-200716": "請將此品管項目的批號有效性檢查設定為'是'。",
    "0000-200717": "請檢查選擇的片數。",
    "0000-200710": "請設定品管項目作業站對應資料。",
    "0000-200711": "請設定線上管制要因資料。",
    "0000-200712": "請設定規格要因要因資料。",
    "0000-200713": "請檢查品管項目之收集要因",
    "0000-200723": "請重新定義編號。",
    "0000-200722": "請檢查週曆檔 tblSYSCalendar。",
    "0000-200720": "請檢查樣本數。",
    "0000-200601": "請檢查屬性是否已定義。",
    "0000-200602": "請檢查載具狀態!",
    "0000-200505": "請先刪除此品管項目之量測紀錄‧",
    "0000-200503": "請重新定義編號。",
    "0000-200502": "請重新定義編號。",
    "0000-200501": "請重新定義編號。",
    "0000-203100": "請檢查帳號有效性，並重新輸入。",
    "0000-203101": "請取得一組新序號",
    "0000-203102": "請確認資料表定義的正確性",
    "0000-203104": "移出部分生產批",
    "0000-203105": "檢查SQL語法正確性",
    "0000-203090": "N/A",
    "0000-203091": "請檢查型態的正確性",
    "0000-203092": "檢查參數的正確性",
    "0000-203093": "請確定資料的可用性",
    "0000-203094": "請取消根節點的核示方塊選項",
    "0000-203095": "請檢查抽樣計畫的參數是否完整",
    "0000-203096": "請重新執行此功能",
    "0000-203097": "請檢查工單與ECN的產品是否符合",
    "0000-203098": "向iMES尋求協助",
    "0000-203099": "設定SysInfo的ADName資料",
    "0000-203081": "請確定系統單位為何",
    "0000-203080": "不可替代",
    "0000-203083": "請檢查數量",
    "0000-203082": "N/A",
    "0000-203085": "檢查數量的正確性",
    "0000-203084": "選擇新的生產區段",
    "0000-203087": "請重新選擇時間",
    "0000-203086": "參數未定義",
    "0000-203089": "N/A",
    "0000-203088": "向iMES尋求協助",
    "0000-203018": "請選擇其他晶圓片號",
    "0000-203019": "請解除工程變更設定",
    "0000-203010": "請檢查此特性是否已經存在資料",
    "0000-203011": "請檢查函數名稱",
    "0000-203012": "請先核准工單",
    "0000-203013": "檢查工程碼的設定",
    "0000-203014": "請設定產品預設流程",
    "0000-203015": "檢查BOM的料號設定",
    "0000-203016": "請檢查 FOUP 的狀態",
    "0000-203017": "選取其他元件",
    "0000-203039": "請檢查生產批現況",
    "0000-203032": "離開目前畫面，重新進入後繼續此動作",
    "0000-203033": "檢查生產批狀態",
    "0000-203030": "Check Out 生產批",
    "0000-203031": "請檢查生產批數量",
    "0000-203036": "N/A",
    "0000-203037": "請改用WIP模組之異常單解除",
    "0000-203034": "請定義移轉法則",
    "0000-203035": "N/A",
    "0000-203009": "請確定生產批的元件是否存在",
    "0000-203008": "檢查單位轉換設定",
    "0000-203001": "通知IT刪除無用的系統連結",
    "0000-203000": "請取得一組新序號",
    "0000-203003": "檢查元件編號的正確性",
    "0000-203002": "請檢查配件分類的正確性",
    "0000-203005": "檢查SL後工程碼的設定正確性",
    "0000-203004": "函數設定的第一個字元必須為『#』",
    "0000-203007": "請檢查資料是否核准或版次是否有效",
    "0000-203006": "檢查法則設定",
    "0000-203058": "應輸入正確之附檔名",
    "0000-203059": "檢查供應商的正確性",
    "0000-203054": "完成至少一筆明細",
    "0000-203055": "檢查資料的有效性",
    "0000-203056": "重選生產批",
    "0000-203057": "重選生產批",
    "0000-203050": "請檢查R道",
    "0000-203051": "開立聯合異常單",
    "0000-203052": "定義元件收集",
    "0000-203029": "檢查生產批狀態",
    "0000-203028": "請確認派工生產批",
    "0000-203023": "請調整下線數",
    "0000-203022": "檢查包裝數量的正確性",
    "0000-203021": "選擇其他母批",
    "0000-203020": "請先完成首批生產",
    "0000-203027": "請調整派工機台",
    "0000-203026": "N/A",
    "0000-203025": "請選擇其他批號",
    "0000-203024": "請補充儲位存量",
    "0000-203078": "請領料至儲位之中",
    "0000-203079": "不可替代",
    "0000-203076": "確定 ERP 的數據是否齊全",
    "0000-203077": "請確定要因值",
    "0000-203074": "請調整時間",
    "0000-203075": "請確定是否確認收集要因與參數的正確性",
    "0000-203072": "請變更機台",
    "0000-203073": "確定資料正確性",
    "0000-203070": "移出部分生產批",
    "0000-203071": "請確定區域的有效性",
    "0000-203049": "完成未完成的元件",
    "0000-203048": "檢查元件資訊",
    "0000-203045": "請檢查生產批的相關資料",
    "0000-203044": "請檢查生產批",
    "0000-203047": "請調整生產批開立數",
    "0000-203046": "請檢查半成品數",
    "0000-203041": "請檢查描述語言之正確性",
    "0000-203040": "請檢查資料有效性",
    "0000-203043": "檢查相關數量的正確性",
    "0000-203042": "請檢查生產批資訊",
    "0000-203068": "請輸入元件特性",
    "0000-203067": "請離開表單後重新進入",
    "0000-203066": "檢查預設區域的定義是否正確",
    "0000-203065": "請檢查狀態的合理性",
    "0000-203064": "請檢查可用設備",
    "0000-203063": "不可刪除資料",
    "0000-203062": "請檢查使用者權限",
    "0000-203061": "必須輸入完整的物料批號",
    "0000-203060": "依據指示確認資料正確性",
    "0000-201913": "定義 Input 資料類型",
    "0000-201910": "移動節點，以避免重疊",
    "0000-201902": "應定義Transfer節點",
    "0000-201903": "只能選取節點",
    "0000-201900": "繪製邏輯的正確性",
    "0000-201906": "確定領料或子工單方式是否正確。",
    "0000-201907": "不應選擇此不存在的資料",
    "0000-201904": "應定義作業站參數條件或描述語言（Scrip）",
    "0000-201905": "流程設定有誤，應檢查此流程之正確性",
    "0000-201908": "檢查節點類型",
    "0000-201909": "子階產品編號不應與母階產品編號相同",
    "0000-201318": "請檢查等級編號有效性!",
    "0000-201311": "請重新指定抽樣數量",
    "0000-201310": "N/A",
    "0000-201317": "N/A",
    "0000-201316": "建議可設定成BIN1或 B1",
    "0000-201301": "請重新調整分級數量",
    "0000-201302": "請調整包裝數量",
    "0000-201303": "請重新分配[R]道數量至其它[BIN]",
    "0000-201304": "請重新輸入等級分佈數量",
    "0000-201305": "N/A",
    "0000-201306": "N/A",
    "0000-201307": "N/A",
    "0000-201119": "N/A",
    "0000-201118": "請重新登入一次",
    "0000-201113": "請先設定該作業站該異常主分類的第一負責群組",
    "0000-201111": "請確認指定生產批有歸屬工單資料",
    "0000-201117": "N/A",
    "0000-201116": "請檢查元件抽樣計畫定義",
    "0000-201108": "N/A",
    "0000-201103": "N/A",
    "0000-201101": "請重新選擇條件",
    "0000-201104": "N/A",
    "0000-201201": "N/A",
    "0000-270005": "請聯絡ERP人員發料至工單",
    "0000-270004": "請使用來料庫房進料",
    "0000-270007": "請將工單屬性P_SKIP_MERGE_UFMAP (跳過UFMAP疊圖)設定為Y",
    "0000-270006": "請將系統參數 P_LOTCREATE_MERGE_UFMAP(生產批開立自動疊圖)設定為N",
    "0000-270001": "請使用來料庫房挑片產生元件資料",
    "0000-270003": "請使用工單開立_PKG功能產生元件資料",
    "0000-270002": "請聯絡ERP人員發料至工單，由系統自動產生元件資料",
    "0000-260001": "選擇其他品管項目",
    "0000-250008": "關鍵用料未刷齊，請檢查",
    "0000-250007": "重工次數超過預設次數，已不能再執行重工作業。",
    "0000-250006": "此治具未做保養設定,或是治具狀態不適用於生產",
    "0000-250005": "治具設定的保養週期時間已到",
    "0000-250004": "治具設定的保養使用次數已到",
    "0000-250003": "治具未核准或是無治具基本資料",
    "0000-250002": "首件檢查未執行!!",
    "0000-250001": "N/A",
    "0000-250106": "N/A",
    "0000-250104": "配件狀態互斥",
    "0000-250105": "N/A",
    "0000-250102": "請檢查設備類別是否設定配件類別",
    "0000-250103": "配件壽命到期",
    "0000-250101": "取消入庫單,重新開立入庫單",
    "0000-240008": "請檢查生產線設定！",
    "0000-240009": "請選擇是或否。",
    "0000-240006": "請確認工單狀態！",
    "0000-240007": "請檢查生產線狀態！",
    "0000-240004": "請確認該序號資訊！",
    "0000-240005": "請確認企業邏輯設定是否正確！",
    "0000-240002": "請確認生產線資訊是否正確！",
    "0000-240003": "請針對該工單執行開線動作。",
    "0000-240001": "請將該單號已撿料項目完全退回,方可報廢!",
    "0000-240012": "此外包單由外包介面開立，不允許於刷卡過帳介面執行，請使用外包回貨介面。",
    "0000-240011": "請執行\"生產批開立\"！",
    "0000-240010": "N/A",
    "9P04-100001": "請選擇是或否。",
    "0000-117009": "N/A",
    "0000-117008": "N/A",
    "0000-117007": "N/A",
    "0000-117006": "N/A",
    "0000-117005": "N/A",
    "0000-117004": "N/A",
    "0000-117003": "N/A",
    "0000-117002": "N/A",
    "0000-117001": "N/A",
    "0000-117010": "請重新選取生產批",
    "0000-130002": "超過3日未同步GuardServer。請通知IT確認Autorun是否連線異常。",
    "0000-130001": "請通知IT協助處理。",
    "0000-101109": "N/A",
    "0000-101102": "請確認輸入帳號為有效的員工編號",
    "0000-101105": "請檢查屬性設定",
    "0000-101107": "請檢查屬性設定",
    "0000-101106": "請檢查屬性設定",
    "0000-101110": "N/A",
    "0000-101114": "N/A",
    "0000-101115": "N/A",
    "0000-101116": "請檢查工單屬性設定",
    "0000-101309": "N/A",
    "0000-101308": "N/A",
    "0000-101318": "N/A",
    "0000-101312": "N/A",
    "0000-101313": "N/A",
    "0000-101314": "N/A",
    "0000-101315": "N/A",
    "0000-103028": "請自介面型或函數型擇一",
    "0000-103029": "N/A",
    "0000-103020": "請檢查輸入資料的正確性",
    "0000-103021": "請檢查資料正確性",
    "0000-103022": "請確定是否在有效期間",
    "0000-103023": "請選擇其他參考批",
    "0000-103024": "N/A",
    "0000-103025": "N/A",
    "0000-103026": "請選擇其他預訂單號",
    "0000-103027": "請找系統管理人處理",
    "0000-103008": "請待尾批檢驗完成",
    "0000-103009": "N/A",
    "0000-103002": "變更計量方式或檢查批號的選項",
    "0000-103003": "請選取物料批號檢查",
    "0000-103000": "請變更工程碼",
    "0000-103001": "請選擇是或否。（如果不儲存，所有變更將會遺失）",
    "0000-103006": "N/A",
    "0000-103007": "請依據 NG 的狀態處理",
    "0000-103004": "請選取『續Go』",
    "0000-103005": "請選取 OEM Sendout",
    "0000-103039": "請取消料號變更",
    "0000-103038": "系統以元件機制處理排數需求，因此元件數量應等於生產排數",
    "0000-103031": "N/A",
    "0000-103030": "N/A",
    "0000-103033": "請使用指定參考批",
    "0000-103032": "N/A",
    "0000-103035": "回作業站不允許Start、End、Group OP類型的站點",
    "0000-103034": "請選擇其他選項",
    "0000-103037": "請取消新增的動作",
    "0000-103036": "請設定油墨烘烤之 Pattern",
    "0000-103019": "請確定條件的正確性",
    "0000-103018": "N/A",
    "0000-103013": "N/A",
    "0000-103012": "請選擇至少一個 pass 的元件",
    "0000-103011": "N/A",
    "0000-103010": "N/A",
    "0000-103017": "請檢查機台配置",
    "0000-103016": "N/A",
    "0000-103015": "N/A",
    "0000-103014": "依據提示進行",
    "0000-103046": "變更關鍵用料選項或檢查批號選項",
    "0000-103044": "N/A",
    "0000-103045": "N/A",
    "0000-103042": "請選擇每片幾點或AQL作抽樣",
    "0000-103043": "請選擇其他抽樣計畫",
    "0000-103040": "請取消領用",
    "0000-103041": "請檢查排班表",
    "0000-100108": "請選擇是或否。",
    "0000-100109": "請選擇是或否。",
    "0000-100101": "請選擇是或否",
    "0000-100102": "請選擇是或否",
    "0000-100103": "請選擇是或否",
    "0000-100104": "請選擇是或否。",
    "0000-100105": "請選擇是或否。",
    "0000-100106": "請選擇是或否。",
    "0000-100107": "請選擇是或否。",
    "0000-100018": "請選擇是或否",
    "0000-100019": "請選擇是或否",
    "0000-100010": "請選擇是或否",
    "0000-100011": "請選擇是或否",
    "0000-100012": "請選擇是或否",
    "0000-100013": "請選擇是或否",
    "0000-100014": "請選擇是或否",
    "0000-100015": "請選擇是或否",
    "0000-100016": "請選擇是或否",
    "0000-100017": "請選擇是或否",
    "0000-100009": "請選擇是或否",
    "0000-100008": "請選擇是或否",
    "0000-100001": "請選擇是或否",
    "0000-100003": "請選擇是或否",
    "0000-100002": "請選擇是或否",
    "0000-100005": "請選擇是或否",
    "0000-100004": "請選擇是或否",
    "0000-100007": "請選擇是或否",
    "0000-100006": "請選擇是或否",
    "0000-100020": "請選擇是或否",
    "0000-100501": "請選擇是或否。",
    "0000-100502": "請選擇是或否。",
    "0000-100203": "請選擇是或否。",
    "0000-100202": "請選擇是或否。",
    "0000-100201": "請選擇是或否。",
    "0000-100204": "請選擇是或否。",
    "0000-100618": "請選擇是或否。",
    "0000-100619": "請選擇是或否。",
    "0000-100616": "請選擇是或否。",
    "0000-100617": "請選擇是或否。",
    "0000-100614": "請選擇是或否。",
    "0000-100615": "請選擇是或否。",
    "0000-100612": "請選擇是或否。",
    "0000-100613": "請選擇是或否。",
    "0000-100610": "請選擇是或否。",
    "0000-100611": "請選擇是或否。",
    "0000-100625": "請選擇是或否。",
    "0000-100624": "請選擇是或否。",
    "0000-100626": "選擇是或否",
    "0000-100621": "請選擇是或否。",
    "0000-100620": "請選擇是或否。",
    "0000-100623": "請選擇是或否。",
    "0000-100622": "請選擇是或否。",
    "0000-100609": "請選擇是或否",
    "0000-100608": "請選擇是或否。",
    "0000-100607": "請選擇是或否。",
    "0000-100606": "請選擇是或否。",
    "0000-100605": "請選擇是或否。",
    "0000-100604": "請選擇是或否。",
    "0000-100603": "請選擇是或否。",
    "0000-100602": "請選擇是或否。",
    "0000-100601": "請選擇是或否。",
    "0000-102301": "N/A",
    "0000-102302": "請重新載入生產批的還原歷史紀錄",
    "0000-102303": "請重新載入生產批的還原歷史紀錄。",
    "0000-102304": "N/A",
    "0000-102200": "選擇簽核狀態",
    "0000-120008": "請定義單體體序號",
    "0000-120003": "請選擇是或否。",
    "0000-120002": "請選擇是或否",
    "0000-120001": "請選擇是或否",
    "0000-120007": "請重新選擇",
    "0000-120006": "請選擇是或否",
    "0000-120005": "請選擇是或否",
    "0000-120004": "請選擇是或否",
    "0000-410009": "輸入錯誤",
    "0000-410008": "RSPS過帳失敗",
    "0000-410005": "DT未定義所在區域",
    "0000-410004": "轉工單處理失敗",
    "0000-410007": "有其他序號在此作業站",
    "0000-410006": "工號不存在",
    "0000-410001": "找不到劇本",
    "0000-410003": "Chroma過帳失敗",
    "0000-410002": "序號不存在",
    "0000-410018": "班別不存在",
    "0000-410019": "登入區域失敗",
    "0000-410014": "找不到工單劇本",
    "0000-410015": "劇本定義錯誤",
    "0000-410016": "輸入錯誤，按ENTER繼續...",
    "0000-410017": "區域不存在",
    "0000-410010": "RSPS劇本初始失敗",
    "0000-410011": "找不到DT作業站",
    "0000-410012": "DT重複登入",
    "0000-410013": "過帳失敗",
    "0000-410023": "輸入錯誤",
    "0000-410022": "輸入錯誤",
    "0000-410021": "輸入錯誤",
    "0000-410020": "登出區域失敗",
    "0000-400048": "使用者無區域權限",
    "0000-400049": "企業邏輯不存在",
    "0000-400040": "狀態HoldBank",
    "0000-400041": "WIP報廢倉",
    "0000-400042": "序號外包中",
    "0000-400043": "Future Hold",
    "0000-400044": "Future Wait",
    "0000-400045": "Future OS",
    "0000-400046": "序號轉移失敗",
    "0000-400047": "使用者無作業站權限",
    "0000-400051": "作業站錯誤",
    "0000-400050": "企業邏輯類型錯誤",
    "0000-400053": "良品加不良大於投入數",
    "0000-400052": "作業站或進出DT錯誤",
    "0000-400008": "工單無此物料",
    "0000-400009": "PCB料號不存在單身",
    "0000-400004": "工單不存在",
    "0000-400005": "未定義此Error Code",
    "0000-400006": "無序號基本資料",
    "0000-400007": "線邊倉無此序號",
    "0000-400001": "無組裝資料",
    "0000-400002": "作業站未傳入",
    "0000-400003": "流程未傳入",
    "0000-400028": "下線數過多",
    "0000-400029": "組裝數量為0",
    "0000-400026": "新工單無此半成品",
    "0000-400027": "無序號現況",
    "0000-400024": "不良數大於投入數",
    "0000-400025": "工單狀態不符",
    "0000-400022": "標準用料為0",
    "0000-400023": "良品數大於投入數",
    "0000-400020": "料件版次為空白",
    "0000-400021": "狀態非已入庫",
    "0000-400019": "單身未定義用量",
    "0000-400018": "單身未定義用量",
    "0000-400015": "工單流程不存在",
    "0000-400014": "線邊倉無此序號",
    "0000-400017": "生產序號重複",
    "0000-400016": "轉製令流程有誤",
    "0000-400011": "無序號基本資料",
    "0000-400010": "PCB料號不存在單身",
    "0000-400013": "模組料號不存在單身",
    "0000-400012": "線邊倉無此序號",
    "0000-400039": "序號已結批",
    "0000-400038": "序號已入線邊倉",
    "0000-400037": "序號狀態Hold",
    "0000-400036": "序號狀態WAIT",
    "0000-400035": "工號輸入錯誤",
    "0000-400034": "系統參數定義不允許過帳",
    "0000-400033": "無序號基本資料",
    "0000-400032": "數量不符",
    "0000-400031": "小卡數量不足",
    "0000-400030": "組裝數小於標準數",
    "0000-303000": "N/A",
    "0000-301112": "N/A",
    "0000-300102": "請確認數量是否超過。",
    "0000-300101": "請確認數量是否足夠",
    "0000-300032": "請檢查資料庫序號物件的現值，並更新到最新資料",
    "0P10-200001": "請ERP發料",
    "CP02-200001": "請檢查產品參數資料設定",
    "CC01-200002": "請檢查連線字串是否正確、確認VPN是否開啟或連絡EDA管理員。",
    "CC01-200001": "N/A",
    "CP05-200001": "請檢查產品線別班別設定",
    "CP05-200002": "請確認要刪除的資料是否為第一筆。",
    "9P12-200011": "N/A",
    "9P12-200010": "N/A",
    "9P12-200013": "N/A",
    "9P12-200012": "請建立該製令的用料清單。",
    "9P12-200015": "請確認模組之終檢資訊",
    "9P12-200014": "N/A",
    "9P12-200017": "請檢查TedlarColor 設定",
    "9P12-200016": "請檢查工單屬性設定",
    "9P12-200019": "N/A",
    "9P12-200018": "請檢查標籤申請書設定",
    "9P12-200001": "N/A",
    "9P12-200002": "N/A",
    "9P12-200003": "請選擇正確的BR.",
    "9P12-200004": "請選擇其他的Access檔案!",
    "9P12-200005": "N/A",
    "9P12-200006": "請檢查模組序號有效性，並重新輸入。",
    "9P12-200007": "請檢查模組序號有效性，並重新輸入。",
    "9P12-200008": "請檢查模組序號有效性，並重新輸入。",
    "9P12-200009": "N/A",
    "9P12-200022": "N/A",
    "9P12-200023": "N/A",
    "9P12-200020": "N/A",
    "9P12-200021": "N/A",
    "9P12-200026": "請增加工單發料!",
    "9P12-200027": "N/A",
    "9P12-200024": "N/A",
    "9P12-200025": "N/A",
    "9P12-200028": "N/A",
    "9P12-100003": "N/A",
    "9P12-100002": "請選擇是或否。",
    "9P12-100001": "請選擇是或否。",
    "9P12-100007": "N/A",
    "9P12-100006": "N/A",
    "9P12-100005": "N/A",
    "9P12-100004": "N/A",
    "2627": "請檢查資料有效性，並重新輸入。"
  },
  "imes_name": {
    "8P02-200001": "查詢資料量過大!",
    "ORA-00001": "資料重複",
    "CP04-200001": "過帳 之參考批號與機台文字檔的第一批不相同，請檢查是否選對批號過帳",
    "9P10-200002": "非ERP拋轉工單，不允許執行顆粒數登錄!",
    "9P10-200003": "工單為後製程，不需執行顆粒數登錄！",
    "9P10-200001": "尚未發料，不允許執行顆粒數登錄!",
    "DP07-100001": "是否載入暫存資料?",
    "CS25-100001": "此序號為新工單序號，是否進入新包裝作業?",
    "DP06-000029": "工單須執行校機",
    "DP06-000041": "設備治具規格與治具規格不一致",
    "AP16-200004": "無法取得產品作業站法則資料",
    "AP16-200005": "流程路徑不存在!",
    "AP16-200001": "無法取得產品作業站資料",
    "AP16-200002": "解析#GetParameter失敗",
    "CP06-100001": "是否要載入計數檢驗記錄？",
    "DP06-400057": "OQC狀態為已撿料",
    "DP06-400056": "未裝箱完成",
    "DP06-400055": "OQC狀態不為檢驗完成",
    "9P06-200001": "測試資料未上傳!",
    "9P06-200003": "已裝箱",
    "9P06-200002": "測試NG!",
    "0000-000001": "完成",
    "0000-000703": "超出管制界限",
    "0000-000702": "N/A",
    "0000-000701": "管制圖法則結果",
    "0000-002102": "批次報廢完成",
    "0000-002101": "資料必須選擇",
    "0000-002100": "資料輸入",
    "0000-002000": "資料儲存成功 !",
    "0000-001900": "節點已刪除",
    "0000-001901": "操作錯誤",
    "0000-001907": "操作錯誤",
    "0000-001908": "操作錯誤",
    "0000-001909": "操作錯誤",
    "0000-001001": "重新上線成功",
    "0000-003002": "此動作將會關畢本應用程式,並進行下載動作",
    "0000-003001": "使用者已經完成登入",
    "0000-003000": "提示訊息",
    "0000-230001": "Local設定檔中無此品管項目的連線儀器對應資料 !",
    "0000-230003": "抽樣計劃參數和品管項目參數不同",
    "0000-230002": "請至品管項目設定判別法則!!",
    "0000-230005": "資料設定未完整",
    "0000-230004": "資料不存在 !",
    "0000-220008": "尚有未盤點調帳確認的生產批!",
    "0000-220009": "必須選擇關帳類型!",
    "0000-220001": "流程必須相同!",
    "0000-220002": "物料投料點必須為MO才可選擇LOTCREATE當投料站",
    "0000-220003": "流程區段沒有元件, 但所選之客批含有元件!!",
    "0000-220004": "沒有需調帳確認的資料!",
    "0000-220005": "已盤點開帳!",
    "0000-220006": "有多筆的盤點關帳記錄",
    "0000-220007": "己盤點關帳",
    "0000-220028": "沒有單別資料 !",
    "0000-220029": "生產批下線失\u001c\u001d敗",
    "0000-220022": "資料已改變!",
    "0000-220023": "只允許選取一個!",
    "0000-220020": "必須先定義必要資料!",
    "0000-220021": "擷取字串長度不足!",
    "0000-220026": "部分控管屬性未設定,是否繼續?",
    "0000-220027": "無法連線至ERP !",
    "0000-220024": "授權到期日期小於30天",
    "0000-220025": "部分控管屬性未設定!",
    "0000-220019": "資料範圍重疊!",
    "0000-220018": "生產批不可進入此區域生產",
    "0000-220011": "未盤點關帳,不可調帳",
    "0000-220010": "調帳值不可等於生產批目前數量 或小於 0",
    "0000-220013": "密碼超過有效期",
    "0000-220012": "有模組正在執行中，不可登出!",
    "0000-220015": "Form不存在",
    "0000-220014": "密碼錯誤次數過多",
    "0000-220017": "生產批違反Min時效管制, 不允許執行指定動作!",
    "0000-220016": "生產批違反Max時效管制, 不可執行指定動作!",
    "0000-220033": "現在使用的是試用授權，請更新為正式授權！",
    "0000-220032": "工單未發料! ",
    "0000-220031": "產品不可選擇LotCreate當用料作業站",
    "0000-220030": "物料的「是否檢查批號」為True時,不可選擇LotCreate當用料作業站",
    "0000-220036": "無法連線至WebIso",
    "0000-220035": "產品版本必須相同!",
    "0000-220034": "產品必須相同!",
    "0000-216009": "生產批目前狀態不允許上機台,因生產批不符合下述條件(站中、區域有設備且未上機台)!",
    "0000-216008": "異常開立釋放機台,但未指定釋放後機台要轉換的狀態!",
    "0000-216005": "附檔不可刪除!",
    "0000-216004": "異常單類型不可執行異常單動作!",
    "0000-216007": "異常單狀態不可執行此動作!",
    "0000-216006": "生產批現況檔中續GO狀態為空值, 不可執行異常單作廢!",
    "0000-216001": "異常單已存在！",
    "0000-216003": "生產批狀態不可執行異常單動作!",
    "0000-216002": "無執行權限!",
    "0000-216010": "生產批已被判定為異常,但尚未開單,不允許再設成Wait !",
    "0000-217005": "生產批為外包, 不可執行指定動作",
    "0000-217001": "生產批狀態不可執行此動作!",
    "0000-217002": "生產批為Future Wait, 不可執行指定動作",
    "0000-217003": "生產批為Future Hold, 不可執行指定動作",
    "0000-214009": "生產批未指定任何元件!",
    "0000-214008": "元件未指定給任何批號",
    "0000-214007": "ERF狀態不可執行分批!",
    "0000-214006": "生產批目前排數不可分批為指定產品排數!",
    "0000-214005": "取得產品DB分批數失敗!",
    "0000-214004": "指定的動作不可選擇該回原流程型態",
    "0000-214003": "分批總數量必須等於目前數量",
    "0000-214002": "分批元件數必須等於總元件數",
    "0000-214001": "分批bin數必須比剩餘bin數小",
    "0000-214012": "子批數量與Bin總數必須相等!",
    "0000-214013": "不允許刪除",
    "0000-214010": "指定動作不合法",
    "0000-214011": "生產批未指定任何Bin!",
    "0000-215006": "重新上線報廢數或遺失數不可超過原數量!",
    "0000-215007": "ERF狀態不可執行併批!",
    "0000-215004": "併批批號企業邏輯編號必須相同!",
    "0000-215005": "外包批號併批必須為相同外包單號!",
    "0000-215002": "不合法的移轉方式!",
    "0000-215003": "併批批號作業站必須相同!",
    "0000-215001": "併批批數必須大於一",
    "0000-202109": "批號無效或生產批必須存在於成品倉",
    "0000-202108": "資料已存在",
    "0000-202101": "生產批所屬之作業站或企業邏輯不存在",
    "0000-202100": "抽樣計畫不存在",
    "0000-202103": "原物料線邊倉數量不足",
    "0000-202102": "半成品線邊倉數量不足",
    "0000-202105": "工單狀態為「WIP_Return」或「Close」，工單不允許刪除",
    "0000-202104": "所輸入的物料批號與料號不合",
    "0000-202107": "庫存量小於報廢量",
    "0000-202106": "資料不正確",
    "0000-202110": "庫存量不足",
    "0000-202111": "無法取得預設線邊倉",
    "0000-202112": "資料無效，不允許刪除",
    "0000-202113": "無效的時間區間",
    "0000-202114": "無法取得外包資訊，或生產批狀態無效",
    "0000-202115": "檔案不存在!",
    "0000-202008": "不允許執行",
    "0000-202009": "生產批現況不是 UnConfirm，不允許修改！",
    "0000-202001": "無法找到生產批現況",
    "0000-202002": "此生產批沒有同時具備現況與基本資料",
    "0000-202003": "此生產批沒有同時具備現況與現況暫存資料",
    "0000-202004": "無法找到暫存生產批現況資料",
    "0000-202005": "此生產批沒有同時具備現況、基本資料與暫存狀態資料",
    "0000-202006": "此生產批沒有同時具備現況與暫存狀態資料",
    "0000-202007": "無法執行生產批下線",
    "0000-202018": "生產批目前企業邏輯編號與流程圖設定不同,不允許執行!",
    "0000-202011": "生產批已經存在於系統之中",
    "0000-202010": "不允許執行『續Go』的選項",
    "0000-202013": "同步狀態無效",
    "0000-202012": "生產批狀態無效",
    "0000-202015": "無作業站權限",
    "0000-202014": "無法執行生產批下線",
    "0000-202017": "生產批目前作業站與流程圖設定不同,不允許執行!",
    "0000-202016": "不正確的生產批狀態",
    "0000-202308": "還原動作為分批、併批、批次或變更批號,只允許單筆執行!",
    "0000-202303": "原始批號已存在,不允許執行還原!",
    "0000-202302": "生產批狀態已變更,不允許執行目前的還原動作!",
    "0000-202301": "目前的還原歷史紀錄不屬於此生產批!",
    "0000-202307": "不允許單筆還原!",
    "0000-202306": "分批還原檢查失敗!",
    "0000-202305": "併批還原檢查失敗!",
    "0000-202304": "批次還原檢查失敗!",
    "0000-202202": "簽核狀態非初始",
    "0000-202203": "簽核狀態為簽核中、不使用或作用中",
    "0000-202200": "簽核狀態非作用中",
    "0000-202201": "簽核狀態非初始或作用中",
    "0000-202408": "密碼設定錯誤,數字字元不足!",
    "0000-202409": "密碼設定錯誤,密碼不可與帳號相同!",
    "0000-202404": "解碼發生錯誤!",
    "0000-202405": "編碼發生錯誤!",
    "0000-202406": "確認密碼輸入錯誤與密碼不一致!",
    "0000-202407": "密碼設定錯誤,英文字元不足!",
    "0000-202401": "密碼不正確!",
    "0000-202402": "密碼編碼後的長度大於50碼,超過資料庫限制!",
    "0000-202403": "密碼長度大於25碼!",
    "0000-202414": "後端伺服器連線失敗！",
    "0000-202411": "密碼設定錯誤,密碼長度不足!",
    "0000-202410": "密碼設定錯誤,密碼中包含禁用字串!",
    "0000-202413": "密碼設定錯誤,新舊密碼需有N個字元不同!",
    "0000-202412": "密碼設定錯誤,相同字元出現次數大於密碼規則的限制!",
    "0000-200121": "產品資料設定不完整",
    "0000-200120": "區域資料設定不完整",
    "0000-200122": "無此權限",
    "0000-200109": "重新上線損壞數必須是數值。",
    "0000-200108": "重新上線損壞數必須<損壞數",
    "0000-200103": "未挑選生產批",
    "0000-200102": "併批新批號不允許為空白 !",
    "0000-200101": "批號不允許為空白 !",
    "0000-200107": "流程編號沒有選取『Start』節點。",
    "0000-200106": "沒有挑選流程!",
    "0000-200105": "重新上線良品數不得為0",
    "0000-200104": "參考批無法執行併批，可能目前狀態不允許併批，或參考批未被選擇。",
    "0000-200118": "機種編號不允許空白，請輸入機種編號 !",
    "0000-200119": "無法查詢到對應的機種編號 !",
    "0000-200112": "重新上線良品數必須>= 0",
    "0000-200113": "重新上線良品數必須<良品數",
    "0000-200110": "重新上線損壞數必須> = 0",
    "0000-200116": "庫房編號或生產批序號為空!",
    "0000-200117": "並批總批量<=0",
    "0000-200114": "流程的區段次序未被選取，流程次序必須是連續的!",
    "0000-200115": "一個流程只允許挑選一個區段次序!",
    "0000-200093": "資料發生衝突",
    "0000-200092": "刪除資料失敗",
    "0000-200091": "執行失敗",
    "0000-200095": "已有相同客戶編號及客戶批號的可用庫房預先異常單存在",
    "0000-200094": "報廢資料失敗",
    "0000-200021": "簽核狀態無效",
    "0000-200022": "資料簽核失敗",
    "0000-200002": "必要資料未傳入!",
    "0000-200003": "資料不存在 !",
    "0000-200001": "必要欄位不可空白!",
    "0000-200004": "資料重複",
    "0000-200005": "資料是空值 !",
    "0000-200031": "資料關連失敗",
    "0000-200033": "不允許出現 Insert,Update,Delete 等指令",
    "0000-200032": "更新資料時發生一致性的錯誤!",
    "0000-200060": "數量錯誤 !",
    "0000-200061": "只允許查詢唯一欄位",
    "0000-200062": "權限不足,無法執行！",
    "0000-200018": "資料必須為整數型態 !",
    "0000-200013": "資料必須為布林值型態 !",
    "0000-200012": "資料必須為日期型態 !",
    "0000-200011": "資料必須為數值型態 !",
    "0000-200017": "資料必須大於0 !",
    "0000-200016": "資料必須大於或等於0 !",
    "0000-200015": "資料不合理 !",
    "0000-200014": "資料必須為百分比型態 !",
    "0000-200041": "特性編號，屬性編號在()是不正確的 ！",
    "0000-200709": "必須選擇一個品管項目以計算Cpk !",
    "0000-200708": "必須設定品管項目原因對應資料!",
    "0000-200705": "群組編號不可與計數品管項目編號相同。",
    "0000-200704": "不能在編號中使用',' 號。",
    "0000-200707": "此報表不適用於此品管項目！",
    "0000-200706": "群組編號不可與計量品管項目編號相同。",
    "0000-200701": "取得規格或管制圖資料失敗!",
    "0000-200703": "不同樣本數的品管項目無法合併!",
    "0000-200702": "數據超出範圍 !",
    "0000-200719": "此品管項目應使用特殊收集介面!",
    "0000-200714": "必須設定抽樣計畫或品管項目的模擬參數。",
    "0000-200715": "品管群組沒有品管項目明細資料!",
    "0000-200716": "此品管項目不作批號有效性檢查,無法在WIP管制中執行資料收集!",
    "0000-200717": "已選擇的片數與抽樣計畫不符!",
    "0000-200710": "必須設定品管項目所屬作業站資料 !",
    "0000-200711": "必須設定線上管制要因。",
    "0000-200712": "必須設定規格要因。",
    "0000-200713": "無法取得品管項目之收集要因！",
    "0000-200723": "不能在編號中使用「(」、「)」。",
    "0000-200722": "週曆檔資料錯誤!",
    "0000-200720": "樣本數設定錯誤!",
    "0000-200601": "取得屬性失敗。",
    "0000-200602": "載具狀態錯誤,不允許執行!",
    "0000-200505": "此品管項目已收集檢驗資料，不可刪除 !!",
    "0000-200503": "編號不可與任一品管群組編號相同",
    "0000-200502": "編號不可與任一計數品管項目編號相同",
    "0000-200501": "編號不可與任一計量品管項目編號相同",
    "0000-203100": "AD認証錯誤",
    "0000-203101": "此序號不可使用",
    "0000-203102": "資料行名稱或提供的數值數量與資料表定義不相符",
    "0000-203104": "超出機台上貨量",
    "0000-203105": "異動資料筆數超出預期數",
    "0000-203090": "組件或元件放置於其他載具當中",
    "0000-203091": "型態不符",
    "0000-203092": "傳入參數不正確",
    "0000-203093": "不可使用或無資料可以使用",
    "0000-203094": "最終產品不能直接以庫存投料",
    "0000-203095": "抽樣計畫檢查失敗",
    "0000-203096": "生產批狀態被其他使用者變更",
    "0000-203097": "轉入的工單是否符合 ECN 的產品編號",
    "0000-203098": "系統註冊資料錯誤",
    "0000-203099": "ADName沒設定",
    "0000-203081": "同一類型的單位只允許唯一一個系統單位",
    "0000-203080": "此物料為半成品，不可設定替待料",
    "0000-203083": "數量不足",
    "0000-203082": "沒有計量或計數檢測資料",
    "0000-203085": "數量不符",
    "0000-203084": "生產區段錯誤",
    "0000-203087": "時間區間不合理",
    "0000-203086": "模擬失敗",
    "0000-203089": "函數條件不充分，無法提供檢視",
    "0000-203088": "找不到系統註冊資料",
    "0000-203018": "所選擇客戶晶圓已經投入於其他生產批",
    "0000-203019": "工程變更批號",
    "0000-203010": "無法取得特性值",
    "0000-203011": "函數名稱定義錯誤",
    "0000-203012": "工單狀態未核准",
    "0000-203013": "無效的工程碼",
    "0000-203014": "產品未設定預設流程",
    "0000-203015": "料號已設定於BOM之中，不得刪除",
    "0000-203016": "FOUP 上的生產批不允許執行",
    "0000-203017": "此元件已經投入於其他生產批中",
    "0000-203039": "生產批資訊無效",
    "0000-203032": "此生產批有其他動作進行，禁止目前動作的繼續",
    "0000-203033": "生產批現況必須為「complete」才允許移轉生產批",
    "0000-203030": "禁止調整批量",
    "0000-203031": "生產批數量必須相等",
    "0000-203036": "生產批移轉失敗",
    "0000-203037": "SPC 不支援此生產批",
    "0000-203034": "未定義移轉法則",
    "0000-203035": "不允許轉移",
    "0000-203009": "無法找到元件現況資料",
    "0000-203008": "單位轉換錯誤",
    "0000-203001": "超出系統最大上線人數",
    "0000-203000": "序號已經存在",
    "0000-203003": "取得元件狀態失敗",
    "0000-203002": "取得配件分類失敗",
    "0000-203005": "無法取得SL後工程碼",
    "0000-203004": "無法取得函數值",
    "0000-203007": "無法找到目前版次",
    "0000-203006": "無法取得法則執行結果",
    "0000-203058": "附檔名無效",
    "0000-203059": "所選取元件的供應商有誤",
    "0000-203054": "至少需要一筆明細資料",
    "0000-203055": "至少需要一筆生產批",
    "0000-203056": "所選生產批必須已經完成 Trigger 動作",
    "0000-203057": "所有生產批狀態必須相同",
    "0000-203050": "R道數量必須為0",
    "0000-203051": "整合環境下，品管群組必須開立聯合異常單",
    "0000-203052": "必須為元件式收集",
    "0000-203029": "生產批在不同作業站",
    "0000-203028": "此生產批非第一排序生產",
    "0000-203023": "工單下線數大於未下線數",
    "0000-203022": "包裝數量大於原始數量 !",
    "0000-203021": "母批批號狀態不合",
    "0000-203020": "首批未完成",
    "0000-203027": "生產批所派工的機台無法使用",
    "0000-203026": "無法調整生產批數量",
    "0000-203025": "所選批號已經設定於工程變更之中",
    "0000-203024": "儲位數量不足",
    "0000-203078": "儲位存料數量不足",
    "0000-203079": "此物料為指定用料，不允許使用替待料",
    "0000-203076": "來自 ERP 檢驗單的資料不足",
    "0000-203077": "要因內容不完整",
    "0000-203074": "不能早於此管制圖第一筆的明細歷程紀錄之時間",
    "0000-203075": "收集要因尚未確認或參數錯誤",
    "0000-203072": "此機台不可使用",
    "0000-203073": "DB Owner 或資料表錯誤",
    "0000-203070": "超出機台容量",
    "0000-203071": "變更區域與預設區域相同",
    "0000-203049": "所有元件都必須完成",
    "0000-203048": "元件收集失敗",
    "0000-203045": "生產批不存在任何元件資訊",
    "0000-203044": "無效的批號",
    "0000-203047": "工單未開立生產批數不足",
    "0000-203046": "生產批目前數量不等於半成品數",
    "0000-203041": "描述語言設定錯誤",
    "0000-203040": "資料已存在",
    "0000-203043": "良品數超過原投入數+PN Bonus數",
    "0000-203042": "無法找到生產批資訊",
    "0000-203068": "未輸入元件特性",
    "0000-203067": "部分生產批狀態已改變",
    "0000-203066": "已定義預設區域",
    "0000-203065": "狀態不符合",
    "0000-203064": "無可用設備",
    "0000-203063": "簽核群組已經設定於簽核流程之中，不允許刪除",
    "0000-203062": "使用者權限不足",
    "0000-203061": "物料檢查失敗",
    "0000-203060": "企業邏輯執行失敗",
    "0000-201913": "資料定義錯誤",
    "0000-201910": "資料定義錯誤",
    "0000-201902": "資料定義錯誤",
    "0000-201903": "操作錯誤",
    "0000-201900": "繪製邏輯錯誤",
    "0000-201906": "子工單邏輯錯誤",
    "0000-201907": "資料不存在",
    "0000-201904": "資料定義錯誤",
    "0000-201905": "生產批轉移錯誤",
    "0000-201908": "操作錯誤",
    "0000-201909": "資料定義錯誤",
    "0000-201318": "等級編號不存在!",
    "0000-201311": "抽樣數量不可超過原始數量",
    "0000-201310": "重測最後結果數量加上[R]道數量不等於總重測數量",
    "0000-201317": "等級編號已被指定",
    "0000-201316": "等級編號不可為數值",
    "0000-201301": "最後總數為零,不可重測",
    "0000-201302": "包裝數量大於原始數量",
    "0000-201303": "最後測試結果輸入[R]道數量應該為0",
    "0000-201304": "等級數量總和不等於生產批數量",
    "0000-201305": "抽樣BIN必須包括第一次的BIN",
    "0000-201306": "必須包括第一次的BIN",
    "0000-201307": "等級數量總和不等於抽樣數量",
    "0000-201119": "找不到元件編號所屬的生產批編號資料",
    "0000-201118": "找不到登入系統資料",
    "0000-201113": "找不到該作業站所指定異常主分類的第一負責群組",
    "0000-201111": "找不到選擇生產批的歸屬工單編號資料",
    "0000-201117": "法則檢查失敗(找不到生產批相關資料)",
    "0000-201116": "抽樣計畫中找不到片數範圍抽樣數量定義",
    "0000-201108": "找不到PCBI 作業站",
    "0000-201103": "回傳值無法顯示",
    "0000-201101": "無資料繪製",
    "0000-201104": "資料不一致,片號現況檔無片號資料",
    "0000-201201": "已有元件資料,不允許執行動作",
    "0000-270005": "資料不合理 !",
    "0000-270004": "資料不合理 !",
    "0000-270007": "設定不合理",
    "0000-270006": "設定不合理",
    "0000-270001": "資料不合理 !",
    "0000-270003": "資料不合理 !",
    "0000-270002": "資料不合理 !",
    "0000-260001": "無效的品管項目，要因設定不適用於此檢驗標的",
    "0000-250008": "關鍵用料未刷齊",
    "0000-250007": "重工次數超過預設次數",
    "0000-250006": "此治具未做保養設定,或是治具狀態不適用於生產",
    "0000-250005": "治具設定的保養週期時間已到",
    "0000-250004": "治具設定的保養使用次數已到",
    "0000-250003": "治具未核准或是無治具基本資料",
    "0000-250002": "首件檢查未執行!!",
    "0000-250001": "當有設定有效性檢查時，允許空值不得設為Null",
    "0000-250106": "超過寬限次數",
    "0000-250104": "配件狀態互斥",
    "0000-250105": "超過限制次數",
    "0000-250102": "設備類別未設定配件類別",
    "0000-250103": "配件壽命到期",
    "0000-250101": "線邊倉數量不足",
    "0000-240008": "生產線不存在！",
    "0000-240009": "是否只設定部份互斥狀態?",
    "0000-240006": "工單狀態為Hold！",
    "0000-240007": "生產線狀態為Hold！",
    "0000-240004": "該序號已取消！",
    "0000-240005": "作業站企業邏輯設定錯誤！",
    "0000-240002": "序號投線錯誤",
    "0000-240003": "該工單尚未開線！",
    "0000-240001": "已檢料無法報廢!",
    "0000-240012": "生產批無法執行",
    "0000-240011": "此工單有元件",
    "0000-240010": "不允許調整!",
    "9P04-100001": "是否上線?",
    "0000-117009": "生產批狀態為結批 !",
    "0000-117008": "生產批狀態為報廢庫!",
    "0000-117007": "生產批狀態為 Future OS !",
    "0000-117006": "生產批狀態為外包 !",
    "0000-117005": "生產批狀態為 HoldBank!",
    "0000-117004": "生產批為 Future Hold!",
    "0000-117003": "生產批狀態為 Hold !",
    "0000-117002": "生產批狀態為 Future Wait !",
    "0000-117001": "生產批狀態為 Wait!",
    "0000-117010": "生產批狀態為已入庫!",
    "0000-130002": "Guard Server 連線資訊!",
    "0000-130001": "Guard Server 連線異常!",
    "0000-101109": "找不到特性編號",
    "0000-101102": "員工編號",
    "0000-101105": "找不到配件屬性",
    "0000-101107": "找不到工程碼屬性",
    "0000-101106": "找不到產品屬性",
    "0000-101110": "找不到元件參數",
    "0000-101114": "找不到屬性編號",
    "0000-101115": "找不到特性編號",
    "0000-101116": "找不到工單屬性",
    "0000-101309": "總數為0",
    "0000-101308": "未指定任何要重測的等級項目",
    "0000-101318": "生產批包含等級資料,不被一般廢品倉支援",
    "0000-101312": "至少需指定1 BIN項目",
    "0000-101313": "只可選擇一種類型,元件或是等級",
    "0000-101314": "請指定等級編號",
    "0000-101315": "請定義等級",
    "0000-103028": "企業邏輯為手動，可選擇介面型或函數型",
    "0000-103029": "分批規則依據批量分批，不需定義明細資料",
    "0000-103020": "必須輸入適當資料",
    "0000-103021": "無任何資料",
    "0000-103022": "系統使用權檢查失敗",
    "0000-103023": "無與參考批一起的外包批回貨",
    "0000-103024": "非函數型參數",
    "0000-103025": "請斷線",
    "0000-103026": "預訂單號已經使用",
    "0000-103027": "只有系統管理權限可以設定",
    "0000-103008": "生產批尾批未檢驗",
    "0000-103009": "生產批無尾批",
    "0000-103002": "計量方式設為「標準」，因此檢查批號不應為True",
    "0000-103003": "應選取物料批號檢查",
    "0000-103000": "新的工程碼與現況相同",
    "0000-103001": "生產批區域繪製已經改變，您是否儲存？",
    "0000-103006": "資料並無任何改變",
    "0000-103007": "生產批尾批檢驗 NG",
    "0000-103004": "生產批為工程變更，只能選取「續GO」",
    "0000-103005": "代工生產批",
    "0000-103039": "已領料不可再變更料號",
    "0000-103038": "元件數目與排數數量不合",
    "0000-103031": "無機台需要維修",
    "0000-103030": "模組已經定義一組預設流程",
    "0000-103033": "參考批號限制",
    "0000-103032": "目前不允許登入系統",
    "0000-103035": "返回作業站不合法",
    "0000-103034": "不支援目前選擇的選項",
    "0000-103037": "不需新增新的不良資料",
    "0000-103036": "並未設定油墨烘烤之 Pattern !",
    "0000-103019": "無任何資料",
    "0000-103018": "元件被下線了！",
    "0000-103013": "Bonus數量或領用數量其中一個必須為0",
    "0000-103012": "至少需要一個 pass 的元件",
    "0000-103011": "必須定義適當資料",
    "0000-103010": "必須選擇適當資料",
    "0000-103017": "區域上已經配置機台",
    "0000-103016": "生產批狀態：Group OP",
    "0000-103015": "生產批狀態：Complete",
    "0000-103014": "設定順序提示",
    "0000-103046": "關鍵用料設為「關鍵元件(批號控管)」,因此檢查批號不應為False",
    "0000-103044": "兩個欄位間已建立 Drill Down 關連",
    "0000-103045": "兩個欄位間已建立 Join 關連",
    "0000-103042": "Wafer抽點方式必須依據每片幾點或AQL作抽樣",
    "0000-103043": "此抽樣計劃已被移除或作廢",
    "0000-103040": "只有原始的元件可以領用",
    "0000-103041": "你並非排班於此生產線中",
    "0000-100108": "是否清除載具?",
    "0000-100109": "生產批未選擇生產設備,是否不選擇設備繼續解除作業?",
    "0000-100101": "目前企業邏輯為函式型的企業邏輯,是否執行?",
    "0000-100102": "是否還原到指定的還原編號?",
    "0000-100103": "生產批執行CheckIn後將被Hold,是否繼續?",
    "0000-100104": "是否停止連線?",
    "0000-100105": "是否升級?",
    "0000-100106": "是否更新?",
    "0000-100107": "部份作業站未定義參數,是否繼續?",
    "0000-100018": "檔案已存在,是否覆蓋?",
    "0000-100019": "是否拋轉資料至其他廠區?",
    "0000-100010": "是否套用?",
    "0000-100011": "是否覆寫?",
    "0000-100012": "是否執行?",
    "0000-100013": "是否不儲存離開?",
    "0000-100014": "是否放棄?",
    "0000-100015": "是否中止執行?",
    "0000-100016": "是否變更?",
    "0000-100017": "是否忽略變更?",
    "0000-100009": "是否儲存?",
    "0000-100008": "是否清除?",
    "0000-100001": "是否刪除?",
    "0000-100003": "是否解除核准?",
    "0000-100002": "是否核准?",
    "0000-100005": "是否重新執行?",
    "0000-100004": "是否確定?",
    "0000-100007": "是否移除?",
    "0000-100006": "是否下線?",
    "0000-100020": "是否上線?",
    "0000-100501": "資料數超過可匯出的上限,是否僅匯出部分資料？",
    "0000-100502": "是否儲存品管項目之要因?",
    "0000-100203": "單層重工次數已大於等於單層重工限制次數,是否繼續?",
    "0000-100202": "若繼續,全層重工次數將大於等於全層重工限制次數,是否繼續?",
    "0000-100201": "全層重工次數已大於等於全層重工限制次數,是否繼續?",
    "0000-100204": "若繼續,單層重工次數將大於等於單層重工限制次數,是否繼續?",
    "0000-100618": "晶片將被重新選擇,是否確定?",
    "0000-100619": "當樣本數為1,管制圖類別必須為X-Rm,是否確定變更?",
    "0000-100616": "變更母工單亦會重設子工單,是否繼續?",
    "0000-100617": "是否使用目前的規格/管制線作為新的管制界線？",
    "0000-100614": "所選擇之資料將被更改,是否確定更改核准狀態?",
    "0000-100615": "總數量不符合!! 是否確定?",
    "0000-100612": "測試資料已存在,是否覆蓋?",
    "0000-100613": "單價是0,是否繼續?",
    "0000-100610": "是否確定設定生產批等待?",
    "0000-100611": "是否將此組件自所選擇的載具中取出?",
    "0000-100625": "是否確認設定等待?",
    "0000-100624": "是否確認開立異常?",
    "0000-100627": "當樣本數為1,管制圖類別必須為X-Rm!",
    "0000-100626": "是否報廢?",
    "0000-100621": "修改未被確認,是否直接離開?",
    "0000-100620": "工單開立完成,是否繼續?",
    "0000-100623": "在工作日曆中這不是工作天,是否繼續?",
    "0000-100622": "已有收集資料,是否仍要刪除品管管制圖?",
    "0000-100609": "描述語言不合理,是否不儲存直接離開?",
    "0000-100608": "選擇性資料未設定,是否現在設定?",
    "0000-100607": "設備未列管，此作業站將不會改變設備狀態，是否繼續?",
    "0000-100606": "無任何判退數或判退法則,請使用AQL抽樣計劃或判退法則。是否確定不以法則來收集資料?",
    "0000-100605": "報表中某些生產批之狀態已改變。是否確定儲存?",
    "0000-100604": "若資料已被更新,SPC系統將無法重判結果。是否確定更新？",
    "0000-100603": "未定義資料區間。是否重新定義?",
    "0000-100602": "將不被確認,是否確定?",
    "0000-100601": "是否繼續?",
    "0000-102301": "生產批已結批,不允許還原 ",
    "0000-102302": "還原動作已被其他人還原",
    "0000-102303": "沒有任何還原歷史紀錄可還原!",
    "0000-102304": "還原動作已鎖定,不允許還原!",
    "0000-102200": "請選擇簽核狀態",
    "0000-120008": "沒有定義單體序號",
    "0000-120003": "是否確認盤點關帳?",
    "0000-120002": "是否確認盤點開帳?",
    "0000-120001": "是否確認盤點調帳?",
    "0000-120007": "欲指定為 Inline 的品管項目,其批號有效性檢查的值必須為: Yes !",
    "0000-120006": "此批Lot有異常單，若刪除將一併刪除此異常單! 確定要刪除嗎?",
    "0000-120005": "此批Lot不為管制圖中的最後一批，刪除將會影響原先判斷! 確定要刪除嗎?",
    "0000-120004": "產品相關明細(流程、物料表、屬性...)將會被取代，是否繼續?",
    "0000-410009": "輸入錯誤",
    "0000-410008": "RSPS過帳失敗",
    "0000-410005": "DT未定義所在區域",
    "0000-410004": "轉工單處理失敗",
    "0000-410007": "有其他序號在此作業站",
    "0000-410006": "工號不存在",
    "0000-410001": "找不到劇本",
    "0000-410003": "Chroma過帳失敗",
    "0000-410002": "序號不存在",
    "0000-410018": "班別不存在",
    "0000-410019": "登入區域失敗",
    "0000-410014": "找不到工單劇本",
    "0000-410015": "劇本定義錯誤",
    "0000-410016": "輸入錯誤，按ENTER繼續...",
    "0000-410017": "區域不存在",
    "0000-410010": "RSPS劇本初始失敗",
    "0000-410011": "找不到DT作業站",
    "0000-410012": "DT重複登入",
    "0000-410013": "過帳失敗",
    "0000-410023": "輸入錯誤",
    "0000-410022": "輸入錯誤",
    "0000-410021": "輸入錯誤",
    "0000-410020": "登出區域失敗",
    "0000-400048": "使用者無區域權限",
    "0000-400049": "企業邏輯不存在",
    "0000-400040": "狀態HoldBank",
    "0000-400041": "WIP報廢倉",
    "0000-400042": "序號外包中",
    "0000-400043": "Future Hold",
    "0000-400044": "Future Wait",
    "0000-400045": "Future OS",
    "0000-400046": "序號轉移失敗",
    "0000-400047": "使用者無作業站權限",
    "0000-400051": "作業站錯誤",
    "0000-400050": "企業邏輯類型錯誤",
    "0000-400053": "良品加不良大於投入數",
    "0000-400052": "作業站或進出DT錯誤",
    "0000-400008": "工單無此物料",
    "0000-400009": "PCB料號不存在單身",
    "0000-400004": "工單不存在",
    "0000-400005": "未定義此Error Code",
    "0000-400006": "無序號基本資料",
    "0000-400007": "線邊倉無此序號",
    "0000-400001": "無組裝資料",
    "0000-400002": "作業站未傳入",
    "0000-400003": "流程未傳入",
    "0000-400028": "下線數過多",
    "0000-400029": "組裝數量為0",
    "0000-400026": "新工單無此半成品",
    "0000-400027": "無序號現況",
    "0000-400024": "不良數大於投入數",
    "0000-400025": "工單狀態不符",
    "0000-400022": "標準用料為0",
    "0000-400023": "良品數大於投入數",
    "0000-400020": "料件版次為空白",
    "0000-400021": "狀態非已入庫",
    "0000-400019": "單身未定義用量",
    "0000-400018": "單身未定義用量",
    "0000-400015": "工單流程不存在",
    "0000-400014": "線邊倉無此序號",
    "0000-400017": "生產序號重複",
    "0000-400016": "轉製令流程有誤",
    "0000-400011": "無序號基本資料",
    "0000-400010": "PCB料號不存在單身",
    "0000-400013": "模組料號不存在單身",
    "0000-400012": "線邊倉無此序號",
    "0000-400039": "序號已結批",
    "0000-400038": "序號已入線邊倉",
    "0000-400037": "序號狀態Hold",
    "0000-400036": "序號狀態WAIT",
    "0000-400035": "工號輸入錯誤",
    "0000-400034": "不允許過帳",
    "0000-400033": "無序號基本資料",
    "0000-400032": "數量不符",
    "0000-400031": "小卡數量不足",
    "0000-400030": "組裝數小於標準數",
    "0000-303000": "暫存 Packing 序號>999",
    "0000-301112": "找不到生產批所屬主批號的原始批號",
    "0000-300102": "數量超入",
    "0000-300101": "數量缺領",
    "0000-300032": "新增序號錯誤",
    "0P10-200001": "ERP未發料",
    "CP02-200001": "找不到LED參數",
    "CC01-200002": "無法連線至EDA !",
    "CC01-200001": "違反Bin法則",
    "CP05-200001": "無法取得產品線別的班別資料",
    "CP05-200002": "不能刪除第一筆資料",
    "9P12-200011": "工程複判結果不全為Pass，不得續Go!",
    "9P12-200010": "模組序號未做過工程複判!",
    "9P12-200013": "新增箱號失敗!",
    "9P12-200012": "無用料清單!",
    "9P12-200015": "找不到模組資訊",
    "9P12-200014": "選取的箱號的條件與參考箱不同!",
    "9P12-200017": "找不到TedlarColor 設定",
    "9P12-200016": "找不到工單屬性",
    "9P12-200019": "異常單已做最後處置!",
    "9P12-200018": "找不到標籤申請書資訊",
    "9P12-200001": "該工單之物料清單沒有料號第二碼為1或7的物料!",
    "9P12-200002": "取得序號編碼失敗!",
    "9P12-200003": "單位轉換的BR無效!",
    "9P12-200004": "Access檔案錯誤!",
    "9P12-200005": "取得模組重工序號失敗!",
    "9P12-200006": "模組序號不存在或不屬於本製令!",
    "9P12-200007": "模組序號已被對應過!",
    "9P12-200008": "模組序號沒有模組註記資料!",
    "9P12-200009": "模組序號已做過工程複判!",
    "9P12-200022": "生產批BR不為L_CO_PKG",
    "9P12-200023": "包裝箱狀態不為封箱!",
    "9P12-200020": "工單編號之廠別與廠別不一致",
    "9P12-200021": "找不到過帳電腦之所在區域",
    "9P12-200026": "工單發料數量不足!",
    "9P12-200027": "包裝箱狀態不為空箱!",
    "9P12-200024": "找不到電測資料",
    "9P12-200025": "模組未勾選為次級品!",
    "9P12-200028": "序號編碼已達上限!",
    "9P12-100003": "規格不符,過低!",
    "9P12-100002": "是否列印外箱標籤?",
    "9P12-100001": "是否封箱?",
    "9P12-100007": "被註記成次級品!並且PowerLoss低於-10%",
    "9P12-100006": "PowerLoss低於-10%",
    "9P12-100005": "被註記成次級品!",
    "9P12-100004": "規格不符,過高!",
    "2627": "資料重複"
  }
}